Laptop vibrates slightly

My Toshiba Satellite laptop completely froze so I did a hard closed down. Now it vibrates slightly, the device every time that I touch. No noise, just a slight vibration is felt. Weather using the card or battery, it still vibrates. Can someone tell me what this could be? I bought this unit in August 2015. Everything seams very well so far.

Hello

There are very few moving parts in a laptop; fan, hard drive (if this isn't SSD), CD/DVD player (optical drive).

The suspect would be the fan.

See you soon.

Tags: Windows

Similar Questions

  • Computer laptop 15-f211wm Mod #L0T32UA: USB external HARD disk and laptops not detected but used to be

    My USB ports do not seem to work properly.  I used to be able to plug in my external hard drive and mobile phone to transfer files, but now I can't.  In the DEVICE MANAGER of the laptop, nothing seems to be wrong, no red or yellow warning.  However, the USB ports DO not seem to power the devices, my cell phone goes into charge mode and my HDD Seagate you can feel it vibrate slightly.  There are two USB ports on the left side and one on the right, and all three can not detect devices.  Help, please.

    HERE IS a GUIDEto solving the problems of USB such as described in the post.  See if any of these help.  As you have posted in the notebook section, when you do that a single step to cripple, also remove the battery after the computer shuts down, unplug charger, too.  Then hold the power button for at least 30 seconds before feeding back.

    BTW: have you tried to delete all things under the rubric of the USB in the Device Manager, then reboot to allow Windows to reinstall the USB ports?

  • resonance or vibration iMac 27 inch end 2015

    Hello

    Since a week that I am in possession of an iMac 27 inches 5K end 2015 with retina display and HD 1 TB (no merger drive)

    It also does very well, but what stands out is vibrating slightly. This can be observed when handling the Mac down with the index and thumb. Very rarely, he went.

    Is this normal?

    If you bought the new Mac there two guarantees.    You can return it without a doubt during the first 14 days either for refund or Exchange.   It is also the failure of a component for 12 months...  Return to the Mac at the store and ask for according to the option that you want.  It seems that the fan is at fault.

  • Satellite Pro A300 - USB laptop monitor noise

    Hi all

    Had a problem every time I got back the lid of the laptop a bit beyond the vertical position - he makes her a USB device makes when it is plugged in.

    He can not understand why, but started the device built-in photo and with now I pushed the laptop monitor slightly and the camera exploded... Any ideas?

    Its still under warranty.

    Thanks in advance

    I agree with Akuma.
    Satellite Pro A300 is the new laptop model and you should do is contact the service and let check what the problem is here.

  • HP 15-n225TU: I can update my laptop graphics card?

    I have 2 questions.

    1: I installed a new graphics card in my laptop?

    Currently it is to have an integrated graphics processor (Intel HD 4400).

    2: the game experience will improve if I upgrade the RAM?

    Thank you

    Not a lot of good news.

    1 n ° there is no 'card '. The video is a chip that is soldered to the motherboard. There is no physical means to remove it and put something in there. Theoretically there are mothers who would suit your laptop with slightly better graphics, but generally of such a motherboard swap is prohibitively expensive and it is not good value for money. The graphics are still not really good, just a little better.

    2. in function. If the system is muted memory then Yes, adding more memory will help games and everything. 8 GB is the sweet spot these days, and you have 4. Adding a second 4 GB module would allow the memory dual channel which is maybe 10-15% faster in memory operations.  But do not expect any major improvement. This will be a very subtle improvement in how the game is loading, but the pace of game will not really change.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • The sticker on my laptop product key is worn, but I can still do a number above the code bar. Can I still get my product key?

    I have an old laptop that took Vista Home Basic (32 bit) and I need to reinstall Vista but the sticker on the laptop is slightly worn I can't see the product key. There are other numbers, I can make out on the sticker, however. What I need to know, is if it's possible for me to get the product key? Also, I might also want to install XP SP3 instead, because it uses less resources, and I heard that you can use the Vista key to activate XP, I'd be able to do?

    Hello

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

    Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

    If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

    The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

    See you soon.

  • Slight changes in the brightness of the screen.

    I noticed the my new laptop by slightly changing the brightness when I watch a video... is this normal?

    Check out this post and it should solve your problem:

    http://h30434.www3.HP.com/T5/notebook-display-and-video/brightness-automatically-adjusting-to-color-of-current/TD-p/1268559/highlight/false

    All the best!

  • HP laptop could not connect to the netgear N600 router secure

    New laptop HP MAY connect to the Netgear N600 dual band router if NO guarantee is enabled, but it cannot if security is enabled on that either WPA, WPA2, WPA2-PSK regardless.  It can connect too well if wired (of course).

    I reloaded the drivers and all the usual remedies but not joy.  Also I tried using a USB WiFi adapter with the same result, unable to connect with security enabled.  All other devices connect very well including 2 Iphones, Tablet android, Apple TV, Apple MacBook pro, printer, etc. then it does seem like a router problem.

    Laptop is slightly, around the age of 6 months running Windows 8.  As a temporary workaround I disabled DHCP, security and peripheral isolation enabled 2.4 ghz radio router static address then attributed to the laptop, not a lot of security, but that's all I have.  I moved all devices except a (2.4 ghz only) iphone on the active side of 5 ghz on a different SSID with WPA2.

    It seems that the OS has a problem with the hold of encryption in the stack, or maybe it's a hardware problem.  Whatever it is, it works very well with an open WiFi but died completely when any type of security at all turned on, same WEP.  I arrived at the end of my knowledge here and short of a relatively new machine of retirement or try a full reload of the OS (Win 7 X 64 use), I'm stuck.  It is the only system to win 8 I worked (OS nasty if it is).

    Any ideas or suggestions?

    I know it's late, but there are probably people searching on the net because of this problem just as if I were stupid. I got a new laptop Windows 8.1 and plugged into my router to set up. Worked without problem. I unplugged the ethernet cable and jumped on the wireless, typed in my network key and hop, connected with no internet access or other useful functions. Long story short, eventually work was by using the automatic connection on the router (the one at the bottom that looks like a radio with 2 waves coming out of it) to connect the first time instead of manually typing the password.

    You will need to clear your computer auto-enregistré on the network so that you leave cool to do that. At least, I assume that. My laptop has a dual band wireless card, so I just shot on 5G and serves as my network "expenses. After he successfully connected to that one however, my laptop is now having no problem with the 2.4 G which was faulty in the first place.

    Who knows why he can be configured automatically, but don't let you not type the password yourself. In any case, I hope this helps someone!

  • Retina vibrant Pro speakers

    I'll start by saying that this issue could be in my head.

    I've updated to el capitan yesterday and I noticed this morning that when I play normal audio at a reasonable volume my two speakers vibrate slightly. I don't remember what is already a problem before.

    I was wondering if anyone could tell me if it is normal to feel slight vibrations on the retina pro 15 "pregnant?

    Thank you.

    I assume you mean "while sound comes from the speakers ' and not otherwise.

    All speakers vibrate when they work. It's physics to transform electronic signals into sound audible. I realize, you don't ask a question of physics, but it is hard to tell from your question if you mean normal vibrations coming speakers when they work or there's something happening feel you is unusual.

    I still feel the vibrations of the speakers when my hands are on the keyboard of my Mac laptop (a 15 "retina MBPro, a 13" Air MB).

  • Satellite L500 - 152 Display driver Sims3 plus

    Hello. I use this thing = [Satellite L500-152 | http://nordic.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?LNG=18&service=ND#tab3;] .
    And it was fine, until I came out and me Sims3 and Sims3 World Adventures, after installing both (+ in order correct ofc +), when I tried to start them up, I can not for the game Launcher, because an error message blocks my way...
    "* There was an error during startup. "Check the log for details."
    No info for don't nabs like me, about the location journal. And when you press the button available only here, the frozen Launcher naturally also closes its doors with her.

    So I checked google and found that people who have had the same problem, just changed the display driver to one that is supported by the game, I discovered that mine was not, I have * "ATI Mobility Radeon HD 4500 Series."

    _Sims3 taken in charge the radeon drivers are: _
    Series ATI Radeon 9500, 9600, 9800, X 300, X 600, X 700, X 800, X 850, X 1300, X 1600, X 1800, X 1900, X 1950, 2400, 2600, 2900, 3450, 3650, 3850, 3870, 4850, 4870, Â Intel® Graphics Media Accelerator (GMA) GMA series 3 Series 4 GMA.

    If someone could help me, by discovering what driver of the foregoing (as appropriate), will work on this laptop and tell me where to download it, I would be very very very happy :)

    Those who changed the driver perhaps no laptop and desktop computers. There is a big difference.
    Support drivers is much better for desktop computers.

    Problem is that the drivers for laptops are slightly adapted and designed for optimal graphic operations.
    I'm afraid that this with updating the graphics driver will be not so easy.
    It is always recommended to use the drivers provided by the manufacturer of the laptop. With the help of some third part and untested graphics card driver may be forced to run on a maximum and there is risk of damage or surprise. So be careful with this stuff.

  • Satellite U400 rotates much more slowly now

    My laptop Toshiba Satellite U400 running little slow and maybe because I have old drivers for:
    * Intel(r) mobile 45 Express Chipset series controller processor to DRAM - 2A 40

    Yes because it shows that I have the version for this: 8.7.0.1007 * but the * NEW version * is: 9.1.1.1012 *.
    Where can I get these new drivers please?

    BCZ like I said earlier, my laptop is slightly more runing slow now.

    Thank you.

    > Yes because it shows that I have the version for this: 8.7.0.1007 * but the NEW version is: 9.1.1.1012
    > Where can I get these new drivers please?

    You have already posted a similar question here:
    http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=176346

    I think you should follow only a single thread to avoid misunderstandings

  • 17 - e019dx: wearing a helmet is greater than Standard

    Audio port on my laptop is slightly larger than the standard of 3.5 mm.  Therefore, any standard headphones or the speakers won't work.  Wnat type device uses this port and is at - it a connector that will change from this port to a standard size.

    Here's what the textbook says:

    Audio output (headphone) jack/Audio (microphone) jack allows you to connect in pregnant option stereo, headphones, earphones, headphones or an audio cable from the TV. Also lets you plug in a microphone headset option. This decision does not support devices optional microphone transmitters. CAVEAT! To reduce the risk of personal injury, the volume before putting on headphones, earphones or a headset. For more security information, see the regulatory, safety and environmental reviews. To access this guide, from the start screen, supported type, select the HP Support Assistant application, select my computer and then select user guides. NOTE: When a device is connected to the Jack, the computer speakers are disabled. NOTE: Make sure the cable of the device has a connector 4 pin that supports audio output (headphone) and audio (microphone).

    The three bands make a connector 4 pins and you need an adapter like this to plug a standard helmet old school.

    Here is one of Walmart who looks a little different but that work.

    http://www.Walmart.com/IP/21296723?wmlspartner=wlpa & selectedSellerId = 147 & adid = 22222222227015507490 = wl0 & wl1 = g & c = wl2 wl3 = 52397602151 & wl4 = & wl5 = pla & wl6 = 83960987951 & veh = sem

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Satellite L500 wireless empowerment 1DT-disorder after reformat

    Hello, after about a year of owning a Satellite, I thought it would be time to reformat the hard drive and do a fresh install of Windows. However, after the reformat, I realized the wireless was not the connection (or even detect) my network and found that I had to turn it on.

    Problem is, there is no physical network on the laptop switch (slight defect in design, in my opinion), and it had to allow him through a function command. However, the program that showed orders from function available and working, went, as I reformatted. After looking through the section drivers on the Toshiba site, hoping that I could find of the said program, there is nothing. Is there an available way to turn on the adapter wireless thanks to a program external, or better yet, find the original program that orders of service?

    Thanks in advance

    Hello

    You know very well that more useful information, that you write here can help us to understand your problem. It will be interesting to know how you have reformatted your laptop. Toshiba recovery image using or if you have own OS?
    >.. .the program that showed orders from function available and working, has disappeared, I have reformatted.
    Recovery image Toshiba designed for your laptop model contains all the necessary tools and utilities, so I assume that you have installed the version of the OS.
    As the first tone please download and install the package of added value. This package contains several tools and utilities, and one of them is support Button.

  • HP ENVY 17 Notebook PC E8A11UA #ABA Rev 1965-110 motherboard TS

    Well the other day I had a Web page to the top on my screen. I have to turn around and get back on my screen and the laptop looks like it is off. I tried everything and finally took it to a store because she seems to be the motherboard or the CPU, because there is no lights except when the battery charge indicator is and the adapter connects. So the store tells me that my assuptions looks good, it turns out that my motherboard is shot. Is this a known problem with these laptops? My laptop is slightly more than a year, but outside the warranty. Does anyone know the model of motherboard for this laptop and how much it costs:

    Laptop HP ENVY 17 of TS

    E8A11UA #ABA

    Rev 1965-110

    I've owned a lot of cell phones in the past and they got their share of use and beatings. I can't believe this, more than $ 1,000 laptop motherboard died a little over a year...

    Thanks in advance,

    Jim

    The repair, it's your motherboard:

    Equipped of the chipset MB HM87 Express, a graphical subsystem with UMA memory and operating system Windows 8.1 Standard 746450-501

    Repair manuals

    It is not cheap:

    http://www.Amazon.com/HP-746450-501-motherboard-UMA-HM87/DP/B00IY1CZZU/ref=sr_1_1?ie=UTF8&QID=1457712440&SR=8-1&keywords=746450-501

    There is not much I can say to make it more easy except Electronics is unpredictable. Sorry about the premature failure.

  • HP Envy 17-j150ca: hardware HP Envy upgrade

    Hello world

    I had my HP Envy 17-j150ca for nearly two years not and as it has its problems, I love this laptop. Recently, he has worked much more slow and is has become a little too outdated to run newer programs. I suspect it is a problem with the hard drive and am looking for this purpose to be replaced by a new SSD to try to extend the life of my laptop. However, I am also curious to see the upgrade of some of the other equipment. I saw on the forum a lot of users have gotten responses mixed on the subject of their motherboards with a new replacement. My warranty has been flat for almost a year even after HP corrected the defect of fatal design of this laptop (vibration at the base of the opening and closing) so I am quite concerned about the warranty on my machine. Can replace components but if all else fails I'll just use it to replace the entire machine, so the loss of my laptop is not a problem. I have backups and CD installation for my OS as well so it's not a question.

    I understand that I may very well not had the answer I'd like to hear about it, but if anyone has information on how I could keep my laptop to update it would be much appreciated. I thank in advance for any answer, you can have for me.

    See you soon.

    Here is the Service Manual:

    Manual

    The motherboard is socketed and you could upgrade the processor to an i7-4900MQ, which would be updated niveau.4 ghz.

    You have the video of 740M from nVidia, and there is a motherboard that has video of 750M. You can install an SSD and a hard drive because it has 2 bays. Memory can be improved to 16 gigs. The top configuration with the best video processor and RAM and max and a main drive of SSD would still be quite formidable. However, the cost of obtaining it is roughly the same as a new equivalent laptop. And the most recent Skylake platform machines are something that you would have to try.

    Hard to call something with a 4th gen i7-4900MQ obsolete but I'm afraid that economy of the upgrade compared to new in this case is not favourable to the upgrade.

Maybe you are looking for

  • How to charge el capitan

    I can't get the downloads of updates to run. 10.11.4 update Should I reload El Capitan?

  • remove the old version of widdcomm

    I use XP SP3 and want to install bluetooth USB adapter, but installation is refused, "old version of the software must be deleted". Belkin support answer to this query is as follows: -. Please contact Belkin Technical Support and we apologize for the

  • Cannot send messages from the Outbox

    When I try to send I get a message "some problems occurred" I can receive messages O.K.     it the last time I was able to send messages it the duplicated.

  • I can not open Start Menu when I click on the button on the taskbar

    When I click on the Start button, the Start Menu does not open. Also when I right click on the taskbar to see the properties, there is no menu open. There is no context menu when I place the mouse on an icon in the taskbar.

  • Help user interface

    In an application that I create, Inc. (which are the sprites) must be moved around, connected and disconnected by the user. Right now I use Mouse_Down, Mouse_Move and Mouse_Up for movement, and I implemented a double click for working with the connec