laptop will not catch wifi, software systems driver cannot be found to reinstall.
I recently returned my laptop to its factory setting, because it was slow. When I went to use after it could fall any WiFi signal. But it worked when I plugged on the actual router. I try to uninstall the driver and restart my computer but nothing like worked. On the window for my network controller propertys heritage, the roll back driver icon is not highlighted. Help, please!
Drivers for your laptop are provided by the manufacturer of the laptop, and if you had returned to factory of the pilots would have been installed in the process.
Usually, a laptop computer has an external switch or function key to activate wireless
Is there yellow caution marks in Device Manager?
Tags: Windows
Similar Questions
-
My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.
I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.
When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.
A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.
If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.
Hello
Try the microsoft 'fix - it' for your problem below
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
and read this information too
-
I can't transfer pictures from my Motorola RAZR V3i as my laptop will not download a driver.
Original title: Cannot install the driver for motorola v3i
I can't transfer pictures from my Motorola RAZR V3i as my laptop will not download a driver. (Bluetooth) Have you tried through the USB port but it does not work either.
Hello
Contact Motorola here: https://motorola-enterprise.custhelp.com/
-
K010 ENVY: my laptop will not turn off
Hello
When I shutdown/hibernate/standby/resume my laptop, it will die completely.
All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.
And when I try to Hibernate, everything is ok, but I have the same problem.
Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.
After manual turn off, when I turn it on again, everything works correctly:
-If hibernation: OS will continue to last situation.
-If start/stop: OS works normally without error or warning.
After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.
Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.
Is there a parameter/software to check and fix my problem?
Thank you
Hello
You are welcome
On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.
You can use the following method to install an earlier version of the driver IMEI.
Download driver IMEI on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe
Disable your wireless card (should be f12 ).
Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.
When finished, restart the laptop.
If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.
https://support.Microsoft.com/en-GB/KB/3073930
Kind regards
DP - K
-
File Manager XP PRO SP3 will not recognize USB floppy A: drive
File Manager XP PRO SP3 will not recognize USB floppy A: drive
The system tray alerts "new hardware found" and "installed".
In the system. material | Device Manager | floppy drives, the disk is present, activated and works
If I pay BACK the drive is located and can be read and written.
The drive is not the case in (windows explorerer file manager.
The drive is not present in administrative tools. computer management | storage | removalable storage | libraries.
In the removable storage service is started.
If bottom line, the usb floppy is a material recognized, works under DOS, but there is no access to XP.
This happens with two floppies different usb connected directly to a laptop (not a hub). When connecting to another XP computer, the disks are immediately recognized in the file manager and work as expected.
Any ideas?
It's embarrassing, BUT I solved the problem by using TweakIU. It seems that in the workstation. The floppy drives were not verified. Verification of A & B readers did the trick.
-
My windows will not recognize my CD/DVD drive
My computer crashed recently and since then windows will not recognize my CD/DVD drive. My removable disk (e :)) is there, but I was told that windows cannot access the disk.) Also when I try to eject a developed error warning.
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
-
Laptop will not start. Ran startup Memory Test-am failure
Failure ID:U0F323 - 66F722-9XNK1G-406 K 03.
Product ID: B8M97PA #UUF
MEMORY MODULE
Window7 as operating system
Any help would be much appreciated!
Hello
Try the following.
First of all, regarding the manual of maintenance on the link below--remove and reposition your bars of memory.
If the above makes no difference, and you have more than one Module of memory installed, try the following - if you have only 1 Module installed, try in the other available slot.
Again, regards to the manual on the link below, delete one of your modules from memory and then see if the computer will start. If it doesn't, try the same module, but in another location. If it is still won't start, try the other memory module in both slots, to see if any combination will allow the laptop to boot up normally.
The procedure for withdrawal of these modules is detailed on Page 50 of your maintenance & Service Guide.
Kind regards
DP - K
-
HP dv7 will not recognize the second hard drive
My HP dv7-2185dx running Windows 7 will not recognize the second hard drive, bios recognizes this Intel Rapid storage acknowledges.
Main hard drive is a 1 to install a second hard drive to 500 GB.
Hello
Try the following.
Judgment of the laptop and unplug the 2nd HARD drive.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
When windows has reloaded, download and reinstall the Chipset driver at the following link.
When this is finished, stop the laptop.
Reconnect the 2nd HARD drive, then start Notepad and let Windows take over completely for a few minutes before checking if the reader appears in the lower part of the disk management window.
Kind regards
DP - K
-
HP F023WM: My HP laptop will not load after, log.
My HP laptop will not load after login
Lights well, once I connect it just shows a black screen with cursor.
Help, please
Hello
Try the following.
Boot the computer normally and log.
Black screen, hold down the ctrl and alt keys and press delete.
Select Task Manager.
Click on file and select the new task.
Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.
When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.
If the above is not correct the problem, try to run the steps in the link below.
Kind regards
DP - K
-
laptop will not print, the problem is PRINTUI. Missing DLL
Hello. My computer Windows XP laptop will not print, and I found that the problem is PRINTUI. DLL is missing. I have a backup file on my hard drive, but I don't know which folder the file goes to. I have Windows XP Home edition SP2. Does anyone know the correct folder, that this file will?
Hi, Jtmcc,
Adding printers without interaction from the user in Windows
http://support.Microsoft.com/kb/189105
Is the common path: C:\ System32\ printui.dll WINDOWS\
What is printui.dll?
-
I received an update on your part 10/11/10 and now my laptop will not boot in place! I need help.
Hi bobbymh,
-Do you happen to remember the update has been installed?
-You receive an error message when you try to start the computer?
Follow the steps below:
Method 1:
Try to start the computer using the last good known Configuration and check if you can successfully start.
For instructions, see How to start your computer by using last good Configuration known as Windows XP .
Method 2:
Perform the system restore from SafeMode to a restore point prior to the show and check if this solves the problem.
See to run the system in safe mode restore
See also How to restore Windows XP to a previous state
Method 3:
Follow the steps listed in the following article:
How to fix a computer that does not start
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session? I tried the safe mode and do a system restore, which get rid of it. And suggestions? Thank you.
Hello
1. have you made changes on the computer before this problem?
2. do you get an error code?
Follow the mentioned article:
Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
http://support.Microsoft.com/kb/949358
Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.
WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
Hope the above information is helpful.
-
Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.
Hi akilesh.sharma18,
Please repost this in the Audio forum from the laptop to help.
-
USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.
It's a new 12 '' MacBook
-
my laptop will not import my photos and my itunes doesn't sync new music
I'm not sure that the question is my Iphone 5 or the laptop. When I plug my phone both the laptop and the phone between them pick up and my phone syncs automatically, however, my phone always wonder if I want to import new photos and then once I clicked on Yes, it says that no pictures are available. Also when you try to import pictures on an app on the phone, he could not pick up one of my recent photos.
As well as what I downloaded some new music on my itunes on my laptop, however, given that I brought music apple songs downloaded on my itunes on my laptop will not sync and I don't know why. The phone syncs and always put my new music on the phone when it syncs, but it's their import is no longer automatically.
Thanks for any help in advance.
You can copy photos manually from the film. It might sound like a somewhat random Folders collection.
With Apple active any music that you add to your library becomes automatically available for you to download or listen to on your device. Music sync via USB, however.
TT2
Maybe you are looking for
-
Tbird email phone synchronization using IMAP and Mail app?
Hello Looks like I can do this verification but required double. I stopped using the e-mail a little backwards and use Tbird now.But I'd like to be able to check your e-mail from my phone on a non-gmail address non-yahoo email. It uses oneseparate do
-
I can't send or receive emails from Windows Live Mail. Receive the error code 4402. I can send and receive emails from my Windows Live hotmail account. In Windows Live Mail, it also says my server is an http / imap server. Can it be replaced by a pop
-
Access Point WAP200 is compatible with the injector WAPPOE12?
Hello!!! I want to bring the power of an Access Point WAP200. I need to know if the WAPPOE12 injector is compatible with this kind of Access Point.I deployed 108 AP WAP200 in a wireless network and I want to know what type of power injectors, I use i
-
BlackBerry Smartphones can only update the OS for my model
Dear team Y cant I update my os Blod 9780 6 to 7 or another pls suggest or give us any public exchange offer to wait for your smart review
-
Noob question: Playbooks all have the same performance?
I know... noob question. I am to complete my first game PlayBook and before I submit the app store I wanted to make sure that hardware performance will be the same on all the playbook or will it be something because of the performance issues on a per