Laser mouse wireless connection PX1215E-1NAC

Similar Questions

• Wireless Laser Mouse 6000 v2.0 does not connect to the Wireless Desktop 3 receiver. 0a

  Hello

  I'm having a problem, try to use a Wireless Laser Mouse 6000 v2.0 with a wireless desktop receiver 3. 0a. My previous mouse, wireless laser Mouse 5000 connects fine but the left click button is inadmissible about half the time so I bought the Wireless Laser Mouse 6000 v2.0 to replace. Laser mouse 6000 v2.0 works fine on my laptop with the usb receiver that comes with it, but I would like to use this mouse if you use my office receiving office 3. 0a that connects my microsoft comfort keyboard 1027 and all other previous microsoft mouse that I have owned. I downloaded and installed the latest drivers point software and smart and still it does not detect or connect the mouse 6000 v2.0.

  I tried to use the usb receiver supplied with this mouse on my desk but he won't my keyboard (comfort 1027), but the mouse works fine when using the usb receiver. Any suggestions to get this mouse works with my receiver older are greatly appreciated! Thank you

  Hi Mburton8899,

  It must have the same version of the receiver in order to work properly. Unless the mouse is bluetooth, it can only pair with the USB dongle, with which he came.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Bluetooth Stack for Windows by Toshiba with Microsoft Wireless Laser Mouse 8000

  I use the battery Bluetooth for Windows by Toshiba - Version v5.10.01 (T) and I am trying to connect to my Microsoft Wireless Laser Mouse 8000. But the Bluetooth stack does not even see the mouse.

  It only works with the dongle... but I don't want to use a dongle when I already have Bluetooth installed in my laptop.

  Any suggestions appreciated

  Hello
  Before starting any discussion can you please tell us which laptop model you have?

  BTW: What is your BT mouse has own dongle BT?

  See also http://aps.toshiba-tro.de/bluetooth/pages/faq/keyboardnotworking.html

  Good bye

• install Microsoft wireless laser mouse 6000

  Hi, I bought used ms laser 6000 wireless mouse, this one: http://www.microsoft.com/hardware/en-us/d/wireless-laser-mouse-6000 and now I can't find it on the bluetooth on my laptop, I have Bluetooth v2. The mouse requires installing with usb receiver or is it regular bluetooth mouse like those of ebay, you can buy?
  I don't have a usb mouse with receiver and I thought it's ok because it should work on the bluetooth connection, but I can not connect, bluetooth it will not identify not even with the 'Connect' button on the mouse. the mouse works because the laser light is on.

  It is not a Bluetooth mouse.  This is a RF mouse and requires the receiver supplied with the mouse.

• Microsoft wireless laser mouse 8000__

  I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

  I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

  Hello

  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=084

  battery empty? or not connected? DoD you have intellipoint 7?

  have a nice day [url] [color = blue] www.microsoft.com/security download and install updates from Microsoft Update security! [/ Color] [url] [url] http://windows.microsoft.com/en-US/windows-vista/help/using [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.windowslive.com/HowItWorks [color = green] how to use Windows Live [/ color] [url] [url] [color = blue] http://windows.microsoft.com/en-US/windows/help Windows Help & how-to [/ color] [url] [url] http://windows.microsoft.com/en-us/windows-vista/help/top-solutions [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.microsoft.com/windows/internet-explorer/default.aspx [color = green] Internet Explorer 8 : Homepage [/ color] [url] [url] http://windows.microsoft.com/en-US/windows/help/internet-explorer?browser=ie8 [color = blue] Internet Explorer Help home [/ color] [url]

• Driver Wireless Laser Mouse (PA3706E-1ET1) problem software on Windows XP

  I have a Toshiba Wireless Laser Mouse PA3706E-1ET1 that gives a serious problem with the MouseDriver.EXE software provided on the CD with the mouse.

  * First release _ * _: when you install the driver on the CD I get an error message saying that they are not certified by Microsoft. The documentation that came with the mouse has an additive brochure that says about it and ignore that the software works without any problem.

  * _The issue_ *: with the mouse driver, I get a mouse icon in the windows taskbar and clicking on it will allow me to set up all the extra buttons running. Everything works very well at this point. The problem occurs when I try to shut down Windows (this is Windows XP) it will fail to finish. It seems to me close a few icons in the status bar, but then it stops. I can click on stop again and it still will not close. If I click with the right button on the mouse icon of toshiba in the windows taskbar and click EXIT in the drop-down menu, then shut down Windows and then stops. It seems that the mouse driver is to avoid a stop down. This is what is displayed in the event viewer:

  Event type: WARNING
  Event source: USER32
  Event category: no
  Event ID: 1073
  Date: 02/07/2009
  Time: 10:53:03
  User: NT AUTHORITY\SYSTEM
  Computer: PC
  Description:
  The attempt to shut down the PC

  For more information, see Help and Support Center in [http://go.microsoft.com/fwlink/events.asp].
  Data:
  0000: 00 00 00 00...

  * _Third issue_ *: it is serious, I have Microsoft Virtual PC. When I launch and run any VPC I get a blue screen of death. The error is DRIVER_IRQL_NOT_LESS_OR_EQUAL and the offending component is SysMouseFilterF3.sys.

  If I uninstall the mouse driver that disappear from all of the above questions. The mouse works but not all buttons. Scrolling the mouse left + right, vertical and the back and buttons before work, but the parchment of horizontal tilt and two additional buttons do not work.

  I can't find any mention to my model mouse on Toshiba or the Internet in general. Is there an updated driver for this mouse or in any way I can solve problems above without losing the functionality of the extra buttons?

  -Andy

  Re: Toshiba Wireless Laser Mouse PA3706E-1ET1 (which is appears as 'Sysgration USB mouse' in hardware)

  Yes, Andy, I have the same problems with this mouse. No driver updated (or even original) with a view to anywhere.

  Called Toshiba - all they could suggest "just use the drivers on the CD" and unable to offer any other suggestions!
  No drivers on PC World UK (seller) or Sysgration site or the other.

  Author of the driver (info email the driver DLL) contacted but no response until now.
  SysMouseFilterF3.sys does not seem to be the culprit because it causes a blue screen of death on the startup of the system.
  In order to get the mouse to work I just uninstalled Sysgration drivers and delete the mouse in the hardware list.

  Windows Xp then tried and it seems to work ok with driver default for Microsoft - but only right + left, scroll, front + rear, Alt + Tab appear to function.

  Colleagues, it takes up to a new driver appears!

• Satellite M70-147 and Toshiba E-mouse (PX1215E-1NAC)

  Two weeks ago, I bought a Satellite M70-147 and a Toshiba E-mouse (PX1215E-1NAC). Two of them again.
  So far I've failed to do E - the mouse to do its job. I applied the installation instructions to the letter, but nothing helped.
  I discovered that they call it a compatible DID USB mouse, HID, which means Human Interface Device. His driver is mouhid.sys (Windows\system32\drivers), version 5.1.2600.0 and dates August 17, 2001. Not terribly up to date, I would say, but alas! I was not able to find an updated driver, not to Toshiba, not at Microsoft.
  Everyone knows a similar frustration? If so, it has resolved and if so, it would be so good in regard to tell me how?

  Kind regards.

  Hello

  Well, it is very difficult to say why this E-mouse doesn t work.
  Have you tried to use this mouse without the touchpad? Did you get any error messages?
  Check if this mouse works on another laptop or desktop PC.

  And as said Quad->'s Manual of the mouse

• My mouse wireless guard saying lost connection.  I thought that it may need a new Bluetooth card.  An idea of the cost if I do it?

  My mouse wireless guard saying "lost connection".  It takes time for it to reconnect.  Wireless keyboard is OK.  Apple store said that it may need a new Bluetooth "card."  Any idea the cost if necessary.   I tried a new mouse, with the same results.  Having to use a "wired" mouse now taking a much-needed port on my iMac.

  I return to the store and get a better answer. Material, of course, could be the problem. As far as I know, there is no such 'map '.

  Reset the PRAM and SMC... can't hurt, might help.

  Barry

• MS Wireless Laser Mouse 6000. When I test of arrow to scroll/bounce backwards and forwards

  I have a MS Wireless Laser Mouse 6000. For a while it was fantastic, but now, everytime I try the / arrow scrolling through columns of docs, images or e-mail items moved with the cursor (on the side or on the bottom) begins to bounce back and forward and points of view moving vertically (or left and right uncontrollable.) To increase the frustration, sometimes things work normally for a short period before the fun begins. When I change to a basic mouse (USB) there are no more problems! : O Tony

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Where can I get the missing pieces to my keyboard/mouse wireless laser 7000?

  Original title: 'wireless laser mouse/keyboard 7000.

  They gave me the laser wireless 7000 mouse and keyboard but no manual or instructions. I also think that miss me a 'Flash Player' or 'bluetooth' parts?

  Where can I get the missing pieces
  Advise project managers

  Hi Tbackus,

  You can check with the hardware support to set up the keyboard and mouse:

  Drivers, software and documentation of your product

  Hardware support

  For missing parts, you can contact the Microsoft order desk and check.

  In the United States customers contact the service of orders from Microsoft at the following number:

  (800) 360-7561 Monday to Friday from 05:00 to 19:00 Pacific time.

  Canadian customers can contact the Canadian order desk at the following number:

  (800) 933-4750, from Monday to Friday from 05:00 to 19:00 Pacific time.

• Problem loading Wireless Laser Mouse 7000

  I just bought 2 7000 wireless laser mouse. I can't get either one to load. I reinstalled the battery several times, moved to different outlets and nothing. It keeps blinking red.

  Can someone tell me what I am doing wrong?
  Thank you

  I have the same type of mouse exactly, same problem and paper trick didn't work either, but I thought about it! All you need to do to fix is make sure you cut the mouse before you put in the cradle. After the paper failed, I turned off the switch on the bottom of the mouse and is only charged perfectly no problems until now! I hope that's all I had to do to fix it!

• Microsoft Wireless Laser Mouse/Keyboard Version 2.0/3.0

  Hello!

  I was wondering if I can use my v2.0 USB Microsoft 2.4 GHz TRANSCEIVER that works for my keyboard Microsoft Wireless Laser V3.0 and my Microsoft Wireless Laser mouse V2.0 work for my other keyboard and mouse because I lost the transmitter/wireless receiver I had to for use. Anyway, the keyboard is called: Microsoft Wireless Laser Keyboard 6000 v2.0 and mouse is called: Microsoft Wireless Laser Mouse 6000 (there is no version on that). Also, if I can't use the USB with my keyboard and mouse, I was wondering if someone could fix my mouse? My mouse will not move. I move the mouse and my clicker or this thing won't pass. And then sometimes I can just click on it! Please help on these two problems. Thank you very much!!! (:

  Hello

  For Microsoft hardware related issues, you can have a look at this link:

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

• Cannot find the software for my ms wireless laser mouse 8000

  Cannot find the software for my ms wireless laser mouse 8000

  I don't know why you posted this in the forum Office XP, so I moved it to Windows XP 'Hardware and drivers' forum.

  You can find the drivers for the Wireless Laser Mouse 8000 here: http://www.microsoft.com/hardware/en-us/d/wireless-laser-mouse-8000

• MS Wireless Laser Mouse 8000 charging light illuminates any

  Recently, I noticed that the witness of charing on my MS Wireless Laser Mouse 8000 is not lit at all when on the charger. Not green, not red, not flashing, not stable. Just nothing.

  So far, it works again, it seems to charge, but I would like to know if there is a problem. I've done the obvious things (for me): clean the contacts taken care to what the charger is plugged at both ends.

  Any suggestions?

  Thank you.

  Ken Isaacson
  

  KJIsaacson,
  As long as the mouse still works normally and is in charge, so it's nothing to worry about.  Probably the LED went wrong but which would not affect the operation, he is only there as an indicator for you do know that the load.  If the unit stops to load then do it repaired / replaced.

  Let us know if you need more assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Natural Wireless Laser Mouse 7000

  Hello

  I have a 7000 Microsoft Natural wireless laser mouse that I bought as part of a package with a keyboard. The problem I have is the mouse didn't cause the Web page, I've been to zoom in 1000% without me clicking on it, I would like to get back to 100% but he would do it again, it would start then zoom in with all the way to 25%. Also, I can't click on the red x to close a window. On my desktop mouse has already made something as if I dragged something to move. It also uses the left button as if it were a right-click opening things while all the other buttons do nothing. I checked al the configuration and the buttons are assigned correctly. I'm really confused and it is difficult to explain (its like the mouse that has a mind of its own), but I tried everything from changing batteries, uninstalled the software and put it back in place and even move the receiver to another USB port wireless. I have no more ideas about what I can do to make my mouse works normally again. Please could you contact me and advise on what I can do then, as it is very frustrating and practically impossible to use the computer with the mouse behaves as it is.

  Thank you

  Hello

  Test the product on another computer:

  To help you determine if the problem is due to your computer or device, try the mouse on another computer.

  See also: http://support.microsoft.com/kb/838398/en-us