LaserJet 400 M401dw: for m401dw user's guide

Similar Questions

• LaserJet 400 M401dw: 10 Windows driver for LaserJet 400 M401dw

  Recently upgraded from Win 7 to 10 to win on my HP netbook.  Get the message to Win, stating that my printer driver is out of date, but Windows is unable to download the new version.  Went to the HP website to find and there are three listed.  I don't know which is the right one for my printer.  They are:

  1 HP Universal Print Driver for Windows PCL6 (64-bit)

  2 HP Universal Print Driver for Windows Postscript (64-bit)

  3 HP Universal Print Driver for Windows (64-bit) PCL5.

  Plase advise which of them, I need to download and install.

  Thank you!

  I think the old driver was a PCL version.  However, given that I print a large number of PDF files, I'll try the PostScript version this time.  Thanks for the quick and complete answer!

• HP LaserJet 400 M401dw: Print quality suddenly change on specific devices

  I have three computers (iMac, Mac Mini, Macbook Pro) wireless network with my printer, more two iPads. All use the latest version of the software, 10.10.1 on Mac OS.

  1 when the impression of the Mac Mini, has been improved the Mavericks to Yosemite, print quality is perfect.

  2. in printing on other computers, purchased new in December 2014, the quality seems to be draft quality, with full areas hatched. These two devices originally produced normal quality prints. All were extinguished for two weeks at Christmas. The issue of quality appeared when the printer is turned on again today. The iPad also previously created normal print.

  3. when I print a page of test/demo on the printer itself, the quality seems to be the quality of the project, as shown above.

  I deleted and reloaded the drivers on the devices concerned without result.

  The version of the driver on the Mac Mini is 19.7

  The version of the driver on the other two aircraft and after re-installation, is 2

  I copied the HP folder it draws from the Mac Mini to the iMac, but no effect on the quality. Similarly, the soft of HP of the user library. I can't find the driver anywhere 19.7 version.

  If all the computers and tablets this effect I blame the printer, but the Mac Mini is producing normal impressions!

  What Miss me?

  The software had mysteriously turned on the option "Econoprint" of the printer. As I had to disable this option access the web server of the camera (it can be done from the control panel of the printer) I don't know how it could happen other than the machine having a mind of your own! Achieve this result takes about four hours, 50 sheets of paper and an equivalent amount of toner... grrr!

• for keyboard user's Guide

  I can't download the user guide for my MS Wireless 6000 v3 keyboard.
  The copy I get from support download site is in Chinese. Ms wants me to pay $35 to ask them about my keyboard bought last July.
  Using Vista 32.
  Where a user guide for the KB 6000 v3 wireless?

  Hello

  have you tried to download from here:

  http://www.Microsoft.com/hardware/en-us/d/wireless-keyboard-6000v3.0

  Choose the right operating system

• Where can I find the user for HP HDX18-NK148AV guide

  Where can I find the user for HP HDX18-NK148AV guide?

  I just want to know so-called ports and what they are for.

  Hi @bigmutt

  Thank you for your request, I am happy to help you!

  I understand that you want to know what are the different ports. Here is the link to HP HDX 18 Entertainment PC Maintenance and Service of Guide. Please note Chapter 2 page 7 for a description of the external ports.

  Good luck!

• Can someone guide me how disable or disconnect a specific user of WiFi for laptop user and Mobile WiFi user without the user's knowledge.

  Hi, can someone help me to disable a user especially wifi?

  Hello

  Can someone guide me how disable or disconnect a specific user of WiFi for laptop user and Mobile WiFi user without the user's knowledge.

  Because I gave the WiFi setting for the particular user who uses more bandwidth. So, I need to disable his WiFi without his knowledge

  I need help on this

  Thanks in advance

  Waiting for a good and simple suggestion

  Change the WPA2 password on your wireless access point and tell them what it is.

• HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided

  My Hp laserjet 1022 printer working properly for years.

  So far, when he executed more paper he tried a couple of times to get more paper and then stops with a message on the PC it is out of paper.

  Very annoyingly, this has changed recently, now when it is out of paper, he tries a couple of times to get more paper and watch the message on the PC, saying that it is paper and then again, try a couple of times to get more paper and again shows the same message on the PC and him back... This continues to go on and on.

  It's especially annoying when trying to print double-sided. Before he used to stop and ask you to turn the pages to print the other side. Now the previous behavior overrides the break to turn the pages and keeps it will try to get more paper. As now, it does not wait for the user to turn the pages, in general it spoils the impression out by getting another paper that is not what I wanted, he drives me crazy! It's really hard to print anything double face now.

  All solutions?

  Operating system is Windows 7, I just downloaded and installed the latest driver for this printer "2013-01-09, Version: 20120918" and I get the same behavior. In the properties of the printer that I put some State Messages to Off and at least I don't get the full windows message screen poping up every time the printer is trying again to get more paper. I have not found all the other parameters that may affect this behavior.

  Help!

  Hello

  I solved the problem! I found the original CD for the printer. I uninstall the current driver and then install CD and now when the printer is out of paper trying to get paper a couple of times and then stops, as it used to be.

  Thanks for your help.

  Martin

• LaserJet 400 m401dn: HP Laserjet 400 m401dn, make wireless?

  Is it possible to buy a product to make the Laserjet 400 m401dn active wifi or is this product already activated?  The internet router is in another place, so a physical connection is not possible.  I would like the capability configure the SSID, etc. to connect and print.  Thank you.

  > Laserjet 400 m401dn wifi active or is this product already activated?

  The m401dn is a model of printer Dmodel Network (wire) connected.  The active WiFi model would be a M401dw , that would be the model Dand Wwireless.

  However, if you create a connection to your router via a wired Ethernet connection and then the printer would be accessible by wireless network devices.  All you need to do is get the printer on the network.

  > internet router is in a different location so a physical connection is not possible.

  The only options you have are to run a new cable at the location of the printer and Ethernet cable connect with the current hardware.

  Otherwise you would seek to create a 'bridge' between the printer and the router wireless network using a router without wire 2.  Configure the wireless router 2 to act as a client or to fill in the primary wireless router that acts as the main Point of access to the network.  Once the 2nd wireless router is filled in elementary school all the devices that are connected to Router 2 will be accessible from the main access point.

  There are guides out there circulating that walks you through this process, but the specific steps will have to come some 2nd router manufacturer, you can decide to experiment.

  Here is a sample of Cisco support article that calls this "Cascade" procedure one router to another:

  http://www.Cisco.com/c/en/us/support/docs/voice-unified-communications/SPA8000-8-port-IP-telephony-gateway/108678-PQA-108678.html

• Where can I get driver of scan on my Laserjet multifunction M1120n for Windows 7?

  Where can I get driver of scan on my Laserjet multifunction M1120n for Windows 7 64 bit? It must be the driver of Windows 7 Scanto.msi. Thank you for your support.

  Hello

  Unfortunately all HP software component (HP, HP Scan tool box, etc.) for this product support 32-bit envoirnment only.

  As you can find it in the User Guide, only basic drivers printing and scanning provided for 64-bit (Page 14):

  http://h10032.www1.HP.com/CTG/manual/c01072750.PDF

  Kind regards

  Shlomi

• RESOLVED - "49 error turn off then" HP LaserJet 400 M451dn

  Last week, I set up not one but 2 printers HP LaserJet 400 M451dn color for a client. It was 2 because I went first to the provider think there is a fault with the printer showed a 49 error randomly, but when I got exactly the same error on the 2nd and the same printer with a different provider, I thought that this may not be the case.

  What I found was - I set up the printer with a static IP address of 192.168.0.218 and excluded this address in the DHCP reservation list, so it is not assigned to another device. If I turned on the printer without the LAN cable connected the printer would say "Ready", but as soon as I connected the LAN cable, it is when that would throw a wobbly and appear "error 49 - Turn off, then on. I tried to reset the default printer without joy.

  THE FIX here IS (or should I say a work around) in the following order:

  (1) remove the LAN / network printer cables.

  (2) to reset the default printer.

  (3) remove the the 192.168.0.218 of the server DHCP reservation.

  (4) delete the IP 192.168.0.218 Server lease.

  (5) connect the LAN cable to the printer.

  (6) can get a new IP address from the printer. Using the same IP address again you go back to step 1 again.

  (7) that's all.

  For some reason, this printer does NOT set a static IP address and put a reserve on the server. Nuts!

  I installed several HP printers that I have in the course of the years and never encountered this problem. As I mentioned above, this is more than a solution to a genuine problem...

  Hope you guys find this post useful.

  I had exactly the same problem with a M451dn of 400 LaserJet, except in a working group with the router making DHCP, use a static address outside DHCP for 2 days and then pool this week had error 49, noticed that when the Lan cable has been disconnected, he seems to have stopped. Printer changed to use DHCP and it works again. (updating the firmware via USB had no effect)

• HP ENVY 15 Notebook PC J6P01UA: Viewer guides hp force display of user's guides in word

  At the opening on the user guide HP for the first time on a new HP laptop, I was presented with an option to view the user guide in Word or PDF and maybe other choices.  I have happpen to choose the WORD.  Big mistake.  It was unknowingly a permanent and irreversible choice with no parameters to return to the display guides the user in PDF format. Now whenever I want to watch the user's guides through utility centre (including the help Wizard or Documentation HP) HP, it throws me a conversion unwanted and responsible for warning in Word format).  I didn't have a conversion to Word, nor have I received a warning that a viewling option was irreversible.

  How to reverse it so that when I use the HP Center utility, I either get a choice to watch again the options or manuals in PDF format?  There must be a setting stored at a place that can be undone.

  I know I can work around this problem by downloading the manuals and do not use the center of the HP utility.  I prefer to solve this problem, so I can get updates and to find the manuals to the more intuitive location, and who knows - really interest me this option

  to view a day manuals in various formats.

  Curiously, the option of language/country is presented each time.  I can undo an accidental choice of manguage, but not format.  These two options should be saved and editable somewhere in the center of the HP utility.

  Hello

  Please try:

  b/open files from Windows Explorer.

  (b) right click a pdf file (known).

  (c) click on properties,

  (d) click on edit

  (e), select Adobe Reader.

  If no Adobe Reader on list. Please download and it:

  http://www.Adobe.com/support/downloads/product.jsp?platform=Windows & product = 10

  then try again.

  There is a product called "Reader", you can select it but my suggestion: use Adobe Reader, much better.

  Kind regards.

• HP LaserJet 400 colorMFP M475dw scan to E-mail problems

  Hi all!

  I would appreciate a solution to my agony.

  We recently purchased a printer HP LaserJet 400 colorMFP M475dw. Now, I'm putting in place (browser-> Scan--> the outgoing message profile administration) to send scanworks by e-mail but face the following problems:

  1. when it is correctly typed all the credentials, even the "Test & Save" option takes forever. After cople attempts I got it successfully tested.

  2. with the help of my personal gmail accout as the sender, sweeping work takes a lot of time. It stops in the phase connection smtp server for quite a long time before even starting the actual analysis.

  3 using the company newly created accounts of e-mail as a sender, it takes even more time. I timed it just 6 minutes and 23 seconds before the actual analysis.

  4. now, it seems to send the scan ok, but with some first attempts it failed with some general error message asking to try again.

  In my opinion, the time it takes is completely unacceptable. Is this a known problem and is there a workaround?

  Our company emails run on MS Office 365 and I use smtp.office365.com as server smtp port 587 and SSL/TLS ticked (tried also unchecked). As I said with Gmail, it would also slow but still very very very slow.

  Help, please?

  I know this is an old thread, but just in case anyone is still having problems with this - I managed to fix it by disabling IPv6 in network-> advanced in the web server administrator. Connect to smtp.gmail.com from 3 minutes + seconds.

• HP LaserJet 400 ColorMFP M475D: HP equipment MIB (Management Information Base)

  Hello!

  I am developing a project with Zabbix (open source solution for the network, applications, and devices, such as a printer, switch and monitoring etc) and now I'm getting better the SNMP Protocol on this software. So, to start, I need to know some information in one of my devices, in this case a HP LaserJet 400 ColorMFP M475DN.

  Could someone tell me how CAN I find the MIB (Management Information Base) and the OID (Object Identifier) of this equipment?

  Thank you!

  Navigate to the developer https://spp.itcs.hp.com/spp/ Web site

  From the home page (via the button in the Software Development Kit ), it is possible to access the package public spaces:

  

  Within the branch Laserjet and Digital Sender , select management of printers. MIB | MIBs Phoenix device, and you'll find a relevant entry for your device:

  

• LaserJet 400 M451dn: laserjet 400

  I have a printer LaserJet 400 M451dn . There was a severe storm, but the printer is on a surge protector APC, including a printer HP LaserJet P1501n and other devices. All other devices operate normally.

  The LaserJet 400 M451dn printer when turned on, the symptoms are the following:

  • Noise of rattling all 4.5 sec
  • White LCD screen
  • no lights on the front panel
  • Ping address responds 'host unreachable '.
  • On printer Ethernet port are turned on

  Printer is on a network, local domestic and no software change or recent driver.

  I tried HP solutions but without success.

  Any suggestion is appreciated.

  ~ Pheeoo

  Hello @Pheeoo

  Think about replacement parts this its go device but you only have two options

  To display sound problem usually a combo that you need to get the trainer + Control Panel from one of the 2 could be the problem

  HP part dept store number its 800 227 8164

  The other option will be to return this printer for a discount for another product

  HP 888 447 0078 ext 813 solutions

  You can call them and see what they have to offer with this second option

• 400 LaserJet (M401): HP Laserjet 400 Networking Question

  We have a HP Laserjet 400 that is connected to a wired network. We also have a point of wireless access on the same network. When an ethernet cable is connected to the printer (in a perfect world), the wireless tap stop to avoid conflicts, BUT about 20 minutes of pluging in an ethernet cable, the wireless access point goes down (no longer works and must be restarted).  This isn't the only one who did this access point. The printer has caused to the whole of the network thus go down (5 servers & 40 + workstations). This printer did not do that when we got it (a year ago). Anyone has any suggestions for me doesnot involve making wirless only or replacement of the acess points (for the 3rd time)?

  Thanks in advance,

  Dan

  Huumm... do not know how this can happen.   However, manually turn off the Radio wireless in the printer.  If the printer supports Direct wireless, make sure that this is also disabled.