LaserJet 600 M602: HP LaserJet 600 M602 don't will switch to tray 2 when Tray 1 is empty

Similar Questions

• LaserJet P1102w: Double-sided printing will not turn off

  Even if double-sided printing is NOT selected in the printer properties, printing all ask for double-sided printing.  So if I go to print a single page printjob, the computer asks to have the blank page that was 'printed' just to get back in the tray.

  How can I get this fixed?

  Hi @Skunkeeper,

  Welcome to the HP Support forum.

  I understand that you use a HP LaserJet Pro P1102w printer with a Windows 10 computer and when you try to print a single page, the printer ejects a blank page and ten invites you to put in the tray, so the second side can be printed, even if double-sided printing is not selected. I would like to help with that.

  This really looks like a software problem. I would like to start by running this HP print and Scan Doctor. It is a tool that allows you to diagnose and solve the problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  Thank you very much, it works, but all I had to do was remove the printer and run 10.5 installation. I was then able to scan through HP Director, without taking other measures.

  Best regards, David

• Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play one.

  Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play one. I see my movie library where it is stored on an external hard drive, but my music was on my iMac.

  Where all the playlists gone and why didn't appear my entire music library? I checked the preferences and iTunes points to the correct folder, BUT only my music purchased appears...

  Same thing happened to me. I tried to replace iTunesLibrary.itl with an older copy, but that has not worked. Then I tried to return a version by resetting the Time Machine's iTunes app, but it would allow me to edit or delete iTunes because it is part of Mac OS X.

  So, I can not sync my iPad or iPhone, update all apps or find my music, that is, the course of the odf, still on my hard drive. ITunes just can't see the library.

  The difficulty of this Apple.

• MY LAPTOP don't WILL NOT LET ME LOG IN - wrong password

  original title: MY LAPTOP don't WILL NOT LET ME LOG IN

  I got on my laptop fine yesterday morning.

  After that the laptop stop entered mode 'sleep' I've tried to reconnect and I get an incorrect password message.

  I have not changed my password in over a year, so I don't know how this is possible.

  Help, please!

  Hi saainthewack522,
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky
   
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I don't want the address to show when I have 10 or 12 Pushpins on my card, Microsoft Streets & Trips

  Original title:

  Location information on the Pushpins

  I have Microsoft Streets & Trips 19.00.17.3000 and when I search for an address, it creates a marker with the address in the part information of the bubble.  I don't want the address to show when I have 10 or 12 Pushpins on my card, but when I only shows the name that it's hard to see them in the context of the card.  I want to have the bubble with only the name, but I can not remove the address from the part of detail of the bubble.  My friend has an older version of S & T, and when he sends me cards I can edit the Pushpins to delete location info.  With my version, is there a setting or a work around that?  It's a lot of your time to remove each pin and manually put blank benchmarks in their place.

  Hello

  For the best assistance would you repost kindly to Highway and street maps, Forum of MapPoint:

  http://social.Microsoft.com/forums/en-us/home?Forum=streetsandtrips

  See you soon.

• OK, I changed my hard reversing in car and the windows don't will not activate because of it, how or who should I call to fix this *... once again!

  OK, I changed my hard reversing in car and the windows don't will not activate because of it, how or who should I call to fix this *... once again!

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------

• I don't have a blank page option when you try to create a new page

  I don't have a blank page option when you try to create a new page, what should I do?

  When questions about the user interface, it helps if you say that you are using which version of Dreamweaver. It sounds as if you are using the latest version of Dreamweaver CC, but try to follow instructions written for an older version. This is the new Document dialog box in Dreamweaver CC 2015:

  

  New Document has replaced the White Page in older versions. To get a blank page, select New Document in the left column, HTML as a Type of Document and there is no tab for framework.

• How should I do to don't see only the tools-plan when I start Dc Acrobat?

  How should I do to don't see only the tools-plan when I start Dc Acrobat?

  Hey Peter,

  If you use the player, then you can do the same thing in preferences as I mentioned above.

  Or, if you have Acrobat, then you can hide the tool by key pane by pressing (SHIFT + F4), enable option 'Restore last view settings... ' under ' Edit > Preferences > Documents.

  Close Acrobat and then relaunch it.

  Kind regards

  Ana Maria

• I tried to download trial version of photoshop on creative cloud. 42% the download stops and the program starts to extract the files, BUT when it's done, he says failed to install. When I click on more information ot says: fatal error: "Microsoft C++ R pa

  I tried to download trial version of photoshop on creative cloud. 42% the download stops and the program starts to extract the files, BUT when it's done, he says failed to install. When I click on more information ot says: fatal error: payload "Microsoft C++ Redistributation Pack 2010 (Code output: 34)." Can someone help me please?

  See link below:

  (Exit code: 34 please see specific errors below for troubleshooting.) For example, ERROR: - Summary - 1 or fatal errors, 0 FATAL error: "Microsoft Visual C++ 20 payload.

• SOS... I don't know what is happening, but when I import the photos to LR5, looks like I have a "Preset" which I did not and the white balance becomes 'custom '... You have an answer that I can solve this problem? Thank you.

  SOS... I don't know what is happening, but when I import the photos to LR5, looks like I have a "Preset" which I did not and the white balance becomes 'custom '... You have an answer that I can solve this problem? Thank you.

  Possibly, you have made changes to your 'by default develop settings'. The default WB in Lightroom should be "under the shot" to view this selection has recently imported a file raw in the develop Module, click history in the left panel, click on the first import. (see screen capture) and then see what settings have been applied to import for the white balance it must be 'in the know '.

• HP laserjet pro cm1415fnw don't scan error WIA.

  We just got a hp laserjet pro cm1415fnw, he manages to print, but unfortunately it will not scan. We have set up to be wireless since it will be used by different users. When I run the HP printer and scan Dr. it is said that there is an error of WIA. I've tried uninstallin and reinstall all the drivers and software, as the recommended HPPSdr, nothing happened. I went in the forums and checked the services that should be running for the scan to work. All services have increased, but still it will not scan. I'm running out of options here with this device. If someone could please give me some advice on how to solve the problem of scanning, I will be extremely grateful.

  Hi @sil89,.

  I understand that you are unable to scan, but you can print on the wireless network. I can help you.

  You can scan from any of the other networked computers?

  You are signed is an administrator of this computer?

  The WIA drivers are part of the Windows operating system.

  Run this made it Microsoft tool to see if it will solve this problem.

  Diagnose and automatically repair Windows files and records issues.

  I tabled this document, just to make sure they are the same ones you had checked.

  This document is to check the services of Windows Image Acquisition (WIA).

  Windows: Digitization of HP Software Does not open or Scan to a printer using a USB connection.

  Do not take into account the title.

  Proceed to Solution 3: check the Windows Image Acquisition (WIA) services.

  Temporarily, run Antivirus software and try to scan the image.

  If the problem persists, download and try to repair the WIA drivers. If you don't feel able to do these steps, you can contact the computer manufacturer or Microsoft to solve the error WIA.

  Back up the registry first.

  How to back up and restore the registry in Windows.

  Restore default startup for Windows Image Acquisition (WIA) Type.

  Please let me know the results.

  Thank you.

• Color LaserJet MFP Pro 277dw: MFP will print but not scan since update Mac OS 10.10.5

  I had used my LaserJet MFP Pro wireless without problem for several years, with the Mavericks and Yosemite.  A few weeks ago a "update" the printer system is invisible.  After several hours of troubleshooting and to try five or six corrections, I finally got the printer online by using the IP address.

  My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner.  It's not a question of adding - they do not to add it.  By HP support, I have reset the system print and tried to start over.  I downloaded HP Easy Print (or Easy Start or whatever), which is the entire site of support in the way of software for the 277dw of the ACM.  The software through me the entire upward and congratulated himself for a job well done, but my printer was not, in fact, related.  He appeared in the printers Control Panel, but would not print.  Just "connecting to printer" in the queue for ten minutes about until what I called off work.  And the scanner does not yet show in the Image Capture, preview or HP Easy Scan.

  So, I went back to my previous fix for the printer, use the IP address.  Any ideas on how to get the scanner appears?

  Hello

  Restart your router by unplugging its power for 30 seconds.

  Once it is fully up and you have internet access on your Mac reboot both the HP printer and the Mac.

  From system preferences, select Printers and scanners and click on the plus sign to add the printer again.

  Can you now ee he listed as Hello type or not?

• HP Color Laserjet M277n MFP: How to use the black cartridges only when the color toners are empty

  Hello team HP,

  I recently bought a HP Color Laserjet MFP M277n I printer I print black & white user only and really don't need color prints. How to set the printer options to print only black & white? How can I replace only the black cartridge when the color cartridges are empty? How many prints (approximate), we can take by toner?

  Kind regards

  Christèle

  Hi @Pavumba,

  Welcome to the Forums of HP Support!

  I understand you're wondering how to use black ink only on your HP Color Laserjet M277n MFP printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you wonder if you need to replace the color cartridge when it is low. This printer is a printer AIO, therefore, you need to replace the ink cartridge when it becomes too weak to be able to resume printing. However, if you print mostly in black, you can configure a preset black only to print in black and white. This would help reduce the use of the color cartridges.

  NOTE: Composite black - for black and white images and photos, a mix of colors called 'composite black' can be used to achieve the quality significantly improved picture and soft gray tones that can be achieved with only black toner. For users who want to print images using just black toner, many HP printers color customer offer configurable options allowing the client to print using only black toner. For example, by selecting "print in grayscale" in the printer driver Specifies print using black ink only. For more information about the use of the toner cartridges, please see this article: how the Toner is used.

   

• Color Laserjet M476dw MFP: page in the nonpaged area 'failure' BSOD when you install the latest driver for M476dw

  I just bought a Color Laserjet MFP M476dw for use on my wireless network.

  I downloaded the latest version of the suite of the HP driver: LJPro-MFP-M476-Full-Solution-13302

  for my Windows 8.1 operating system / 64 - bit and listed as version: 10.0.13302.320 - September 25, 2014

  I was connected with a local administrator for the installation level account

  I started installation, the printer was discovered and s/w install went fine until she gets to the point of print test page test page printed but that page was printing the computer locked with his (first) Disconnections:

  "failure of page in the nonpaged area".

  I turned off, restarted and after the connection got an error message that says:

  «The HP printer and Alerts State met and error and can not recover... Please restart...»

  Windows version: Win32NT 6.2.9200.0

  HP printer status and alerts version: 070.040.00169

  I rebooted again and got the same error...

  I started the uninstall program with the hope of just uninstall the printer status s/w and then put it back.

  but the uninstall program seems to have uninstalled the entire suite of s/w...

  Before going to this one more time, I thought that I would like to ask for suggestions...

  I've owned this phone for 6 months, and it was Cap... it's the first BSOD I did...

  Thanks for any help!

  I wanted to just close this thread:

  I was out of town for a week, but just returned and recalled to HP support.

  The technician did a large manual cleaning of the pilot has failed on my machine.

  and ran two different installers cleaning MSI Windows then with temporarily disabled antivirus s/w

  (which I had also done during initial Setup) we re-installed and everything seems to work.