LaserJet 8500n, won't print documents word with embedded powerpoint slide

Similar Questions

• ActiveX activate protection document word with labview

  Hi all!

  I am trying to enable (or disable) protection of files"a document Word with ActiveX, someone told me that it is possible!

  did someone done before?

  Thanks a lot for your answers

  What starting point you have? You have the report generation tool? There is no pre-made VI to do this, you will need to manipulate the ActiveX reference using nodes of property and call the nodes to perform the actions.

  If you have the report Gen Toolkit, you can use the word get ActiveX references to get the reference "_Document. Once you have, it has a property of simple password stupid that you can set. Entered empty gets rid of password protection. There is also an Invoke method called Protect, which can set specific document protection options.

• HP photosmart c5580 won't print documents under Vista

  HP photosmart c5580 won't print documents. Installed and reinstalled the software and still will not print. can scan documents to correct computer. will not copy or print from printer manually.

  C5500 printer is the default printer. I also have an hp c4280 printer that works if I want to print or scan at any time. I checked device drivers and it says they work prperly more, this is the last version of this printer. I used the troubleshooting of microsoft files site and everything out very well, but still does not print. The ink levels are new in the cartridges and the printer paper in the status bar. Internet connection and a connection between the product and the OK computer. I am lost as I bought all printers have been brand HP, and first time I had a problem.  I hope someone can help. Thanks Monkeytu

  Hi Monkeytu,

  See the article next to the HP Web site:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00843712&LC=en&DLC=en&cc=us&product=3575276

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• MFP M277dw: M277dw LaserJet Pro MFP - cannot print from word, PowerPoint and excel

  Hello

  I just bought a Pro M277dw MFP LaserJet

  It can not print a word a simple page, PowerPoint, and excel.

  No error message with word.

  is the printer online for PowerPoint.  (when I just did a test of the printer page)

  In excel it says maybe NOT enough avaiable memory...

  I find that very strange that it only 1 page and nothing else is running.

  Please review this issue as soon as POSSIBLE.

  Thank you

  Dear Liquid083,

  Well done.

  Thanks for leading me in the right direction

  This "Universal Post Script driver" has worked for my word, PowerPoint and excel

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4157320&swLangOid=8&swEnvOid=4132

  For others who are facing the same problems, please click the link above.

  Then look at what follows.

  HP for Windows PostScript (64-bit) universal print driver 6.0.0.18849
  11 December 2014 19.3

  Thank you

• New M476NW Laserjet Pro do not print MS Word or Excel files

  I just bought a new printer color Laserjet Pro MFP M476nw. I am Sina MS Vista 32bits and MS Office 2007.

  The printer will print pictures, emails and I can make copies, etc, but I can not print Word files, envelopes from Word, Excel files, etc..

  Up to what my old HP Laserjet 4 p died the other day (internal short circuit) I was able to print everything. Spent 8 hours or so try everything I read from Microsoft, HP, etc., without success. Installed, uninstalled, reinstalled, ran diasgnostics, always without success.

  I can't communicate with anyone at HP for less than $99 to talk to a person. Very frustrating.

  As I said, the Word and Excel files printed fine until I bought the new M476nw printer. How can this be repaired?

  @DerekChristense

  Thanks for letting me know that print and Scan Doctor helped you solve your problem and you print back.

• My document word with equations is broken

  I am currently using Microsoft Word 2011 for mac. I am running OSX Mavericks release 10.9.5.

  The problem is often trying to develop a paper of mathematics all pictures and equations jumping around in the document, without even clicking on them. I can have a perfect layout, keep writing on the next page and when I scroll up once again, some of the text has disappeared, the images are a mess and equations moved. It may be important to mention that I use the function "automatic ball/number/letter" (or whatever it is called in English). It looks like this:

  (Support more with the language - I'm Danish)

  

  As you can see here, the document appears as it should and most importantly: equations are in the middle where they are supposed to be.

  Look now what happens if I move my mouse over the text and scrolling down and back up again once:

  

  As you can see, the equations are passed:

  And if I try to edit the document, what happens:

  

  Some of the text is now completely gone!

  This is a really huge problem for me because I often write math assignments and to spend hours to everything put in place when I'm done with the result looking terrible.

  If anyone can think of a solution, it would be much appreciated.

  Thank you in advance-

  You will have more luck asking in the Microsoft forums.

• Internet Explore 11 - download and open documents word with Word 2013

  If I open a link that has a word document, IE 11 will download and open. If I can leave open word, then go to another link to and try to download and open an another word document, does not become the active window and it is also the task bar flashing. If I click on it to give focus, it opens and displays the document I downloaded. It's very annoying. Someone at - it ideas? I tried to load the two word in safe mode and IE with no addins and always get the same behavior.

  Hello

  Thank you for the update.

  From the description, I understand that you have a computer that is in the domain and the virtual office network. So, we have a separate department who is TechNet that will handle the issue for the IT Pro audience.

  Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  TechNet is watched by other computing professionals who would be more likely to help you.

  Thank you

• DeskJet HP 2542: hp 2540 won't print documents from the computer, but test print and network configuration page

  My printer hP model 2540 series deskjet A9U27A not print from my computer. It passes over the Network Setup page test, also has good test print. The printer is set up wireless. Have you tried the scan and printing doctor, but it says there is a software problem. I've uninstalled and reinstalled the software with the original disc, then provided with the software most up-to-date of HP. I did this step several times. Tried several drivers. Tried a static IP address. I'm through with this printer. have also tried to this cycle. Also tried to reconfigure the system. Nothing seems to work. NOTE: When I got this printer I got the same problem, but since it was under warranty Hp remotely solved the problem. They said that the issue was the software so they installed a kind of universal software. Can someone get to the challenge to help me solve the problem printer? Thanks in advance for any help.

  So after a search much more, someone else came up with a solution to my problem. For windows users, it is a question of the evolution of the drivers. A specifically. The 990c driver. I'm not sure of the exact user or the subject header, but it goes like this for windows vista.

  1. click on start

  2. click on Control Panel

  3. click on printers

  4. right click on the printer in question

  5 point to run as administrator, and then click Properties

  6. click on continue

  7. click on advanced

  8. click on new driver

  9. click on next

  10. click on HP under manufacturer

  11. under printers, click HP deskjet 990c

  12. click on next

  13. click on finish

  14. click on apply

  15. click on ok to close

  This is very similar for all windows programs operating.

  with a little research, you will be able to find the exact measurements for each operating system

  Hope this helps all who have the same problem

• HP Envy 5530: Print document word but not web

  My wireless printer will print Word dociments but not a web page.

  It was amazing!  Thanks Rainbow7000.  I had been using Mozilla Firefox and tried to download Google Chrome but couldn't so in desperation I tried Internet Explorer - and it worked!  Thank you very much.

• LaserJet 2300d: Laserjet 2300d does not print double-sided with Windows10

  My excellent laserjet 2300d worked many years.

  Since the upgrade to Windows 10, he claims that duplex printing is not supported. Maybe it's a coincidence, but how to restore duplex printing?

  Hello
  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Automatic duplex printing should now available.

  Kind regards
  Shlomi

• HP Laserjet 1022 won't print on Windows 8

  I downloaded Windows 8 last night and I can't print anything on the LaserJet 1022 printer...  Any suggestions?

  Windows drivers 8 are available for this product. Please visit the product home page and download it from there.

  Product page 1022

• Re: HP Photosmart 5514 won't print black even with new cartridge

  I have the same problem.   I also used 2 ink cartridges.  Come on HP and find a solution or a reminder.  Your name is sali in anything but black ink here.

  @rfrice4

  My apologies for the delay. I will send you a private message (departure from the envelope at the top on the right)

• Color HP Laserjet Pro 200 M251: HP Laserjet Pro 200 M251nw print pdf with OffBeat foot

  Printing documents PFD with the quirky footer al the way to the top.

  Print the pdf as image only pages, then the foot rest where it belongs.

  Hi @Martinkoopman,

  Welcome to the Forums of HP Support! I see when you print pdf documents to your HP LaserJet Pro M251nw Color it prints with the footer moved all the way to the top.  If you print as an image only it remains where it requires.

  1. what program you are using to print PDF files from?

  2 have you tried to update the program?

  3. this happens in all programs or just one?

  I would like to run you HP print and scan doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  What are the results? I'll watch for your reply.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution". If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• Windows 8 won't print PDF files

  I've never had this problem until today. I can't print documents Word and images, but when I try to print the PDF files from my documents or online it will not print. I click on the printer that I always use and click 'print '.  But nothing happens. Help!

  Moved from Vista programs Forum.

  Hi Harley,

  Please contact Microsoft Community.

  I understand that you are not able to print one of your word documents, PDF or images. This problem with printing can occur if you do not have the respective printer drivers installed on the computer. To help you, I would ask you to answer the following questions.

  1. What is the brand and model of your computer and the printer?
  2. You did changes to the computer before the show?
  3. What happens when you print from Notepad and WordPad or Internet explorer?

  In the meantime, I suggest you follow the methods and check if these methods help you resolve the issue.

  Method 1:

  I suggest you try the procedure described in the article and see if it helps.

  Set or change your default printer

  http://Windows.Microsoft.com/en-in/Windows-8/set-change-your-default-printer

  Method 2:

  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Response with status so that we can help you.

• Reading a file MS Word with Tables

  I have experinced a mess when executing this labview program that reads in all tables in a MS Word file and does not see some tables.  The original Word document has hundreds of tables inside and it would be erratic jump a table in the order when he read and run convert text method.

  I reduced the thing down to a file simple word do the same thing.  This VI is not the second table in this document word with 2 tables.  The count property of tables calculated as 2 indicating that the word see 2 tables in the document, but when I try to convert to text the second table I get an indication of infamous error in MS Word and an empty string to the converttotext method.

  Someone knows how to fix?

  It's a delicate question. Here you change the document (with the help of convert to text), and at the end you do not save the changes.

  When you convert a table to text table is more exist and Word reallocate the array indices. In your example after the table 1 is converted to text index 1 is reassign in table 2. In the second iteration, you attempt to get the table with index 2 that no longer exist.

  You can change your code as follows to make it work: tables-> Count value of wire to the N of the loop, wire the constant '1' to the Index value of the item table.

  Ben64