LaserJet cp1025: laserjet cp1025 colour printing error

Similar Questions

• HP LaserJet M252n: The printer error

  There is an error displayed on the screen of the printer of 59.CO, I rebooted the printer and the error code is someone can point me in the direction of a resolution please?

  Hello @techrc, greetings!

  Thank you access the Forums from HP Support for extra support! I see that you encounter the error of printer on your printer Laserjet M252. I will do my best to help you with this problem.

  Is the error message "Error 59" or "error 49"?

  I suggest you to update the firmware of the printer to solve this problem. Please follow the steps mentioned below:

  • Make sure that the HP printer driver is installed on your computer.
  • Click on http://ftp.hp.com/pub/softlib/software13/FW_CPE_Consumer/Orion_SB/M252_Series_FW_Update-20160331.exe to download and run the firmware update utility.
  • Click the update button.
  • Select the printer that you want to update from the list.
  • Click the Refresh button on the dialog window. Follow the on-screen instructions to continue with the upgrade.
  • Do NOT power cycle the printer or the PC during this process or the printer may become unstable or unusable without further attention of HP. The firmware update can take several minutes to complete. Please be patient.
  • To check the update, you can print a configuration page. The configuration page of the current firmware revision in the product information section.

  I'll watch for your reply. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Laserjet M1217 MFP printer - error memory power

  I just install my new printer HP LaserJet M1217. I get the message "Power supply memory error" on the screen of the printer > installed the SW using the HP Smart Install program.  Win 7 is the operating system.

  Thank you very much for your help!

  Hi kongtoy,

  There is a clip on the chip on the cartridge's protective plastic. Remove the orange plastic, and he's going to quit giving you the power of memory error. Refer to figure 6

  Power supply memory error "Message is displayed on the control panel

  

• A continuous green flashing button loan after removing the impression that job - Laserjet CP1025 colour

  I can't get the blinking green ready button to stop the flashing of a Laserjet CP1025 colour. Iniatially I thought it was a fault in the queue and after much effort, I was able to delete a print job that is persistent. I uninstalled the drivers printer and re - install, but it still wouldn't print. I have unplugged the printer from the computer and turned on with the only power to come in it, and even the little green light flashes at me - what can I do?

  It seems that this print job that failed got stuck in the printer memory.  The only thing you can do is a hard reset to clear the memory of the printer work.

  To do a hard reset:

  1. Make sure that the printer is turned on.
  2. Pull out the power cord from the printer.
  3. Pull out the power cord from the wall.
  4. Wait 30 seconds.
  5. Plug everything back in and turn on the printer.

  If this does not work, you will need to replace the printer.

• LaserJet 4000 TN: The printer HP Laserjet 4000 Series PCL5: error state & quot; message & quot;

  I sent the following message to Microsoft after a ' update:

  I have a printer HP Laserjet 4000 Series PCL5 TN which worked beautifully "black only" for many years. A recent update (Windows 10:12 / 22/15) seemed to put the printer in the "printer error state", when you try to print a simple document. It has been my default printer for a long time. I followed the suggestions of printer "windows 10", that is, unplug and plug - check cable (not USB) connections, remove the printer from the list of print devices /, reinstall drivers HP for Windows 10 (following suggestions from HP on HP site) - nothing seems to work. It has a network cable connection, but it is directly connected to my computer, no other computers are connected. See screen capture below. I even did a "recovery" of before 12/22! Any suggestions? Thank you. GM

  I received instructions from Microsoft:

  You run the printer Troubleshooter and identify the cause?

  If this isn't the case, we will do that by visiting the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problems

  Check also the update (KB number) has recently been installed on your computer.

  You can also restore printer drivers and check.

  To restore the driver, you can follow the steps below:

  • Press Windows + R on the desktop screen.
  • Type devmgmt.msc and press ENTER.
  • Expand the printer drivers and do a right-click on the driver and select Properties.
  • Go to the driver tab and click driver RollBack.

  Can I assume that you use a parallel cable to connect the printer to the computer.  If you do this is a known problem that can be solved.  Go to Device Manager and then click ports.  Double-click the lpt for the printer port, and then click on device settings at the top.  Change the default setting of the middle box checked in the box below to use any available interruption. I would also check the legacy down.  If necessary, turn the computer off and then turn it back on, but most of the time this solves the problem without a reboot.

• P laserjet P1606dn: fake windows 10 printer error

  I have a HP Laserjet P1606DN installed and works. I installed windows 10 April 2, and every time I print something
  I get the following error notification
  "PRINTING ON HP LASERJET - PRINTER ERROR COULD NOT PRINT (REPORT NAME). Pages printing in any case without any problem.

  Can someone tell me how to get rid of this error?
  I have an HP office jet pro 8600 - another printer and it prints correctly without error.

  Thanks in advance.

  I solved the problem.

  I have LAN in my house. My HP P1606dn is a NETWORK ETHERNET printer.  I went into the PORTS on the printer and CHANGED my PORT for the TCP/IP connection.

  THIS WORKS.

• How to fix "Printer error state" when I try to print to the HP Laserjet 3030?

  Have not been able to find information on why my HP LaserJet 3030 printer cannot be used with the new computer from Samsung in Windows 8.  I chose driver for printer, but receive error messages - "Printer error state" or "Cannot find the output device" - when I try to print.  What can I do to fix this?

  Unplug the printer for PC > uninstall all printer drivers > restart PC > down load & install the correct driver from the HP Web site > reconnect and turn on printer:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=378058&TaskID=135&cc=us&lang=en&prodSeriesId=378056&prodTypeId=18972

• Paper jam false error HP LaserJet Pro P1102w printer

  Hi my HP LaserJet Pro P1102w printer will not print envelopes and labels. I can print documents in the usual way. I can print on the plateau of encelope, but I can't use Word 2003 to print an address.  When I check "what is the impression he's a doc of the envelope and he says Envoy."  The 'Attention' on the printer flashes.  Troubleshooting says it's a problem with the printer.  I ran the auditor of problem of HP and the message I get, is that the problrm is a paper jam. There is no paper jam!

  I would be grateful for any help

  Thank you

  Ron Barker

  Hi @RonBarker ,

  I see that you have problems printing of envelopes. I will definitely do my best to help you.

  The Word software, to change the auto power.

  When the light is flashing on the printer, if you open and close the cover, the printer should resume printing, it acts like a resume button. Given that this model does not have the button. But I've provided the steps to make the changes via the Word software.

  In Word, click on tools, select letters and direct mail/envelopes and labels, box of the envelope will be opened in the envelope tab, enter your address, click Options, click the Printing Options tab, you will need to change the autopower supply, it is probably set to manual. Check the food method to ensure that it is correctly set.

  

  If you need help, let me know.

  Have a great day!
  Thank you.

• HP LaserJet Pro P1606dn: Fatal error Laserjet p1606dn - hard reset does not help

  I powered on my printer this morning and having to "calibrate" - type sounds for about two minutes, the Attention, ready, and go lights on (solid, no blinking). The printer prints everything I have send to it, even test pages. By following the instructions on this page, I did a hard reset by putting off the printer, unplug the power cable, leaving unplugged for about 60 seconds, then in him plugging back in and turning it back on. Same thing: makes noise for a minute or two, then three strong lights.

  The printer is on a wired LAN, and I tried printing from two different computers on the network. I tried not to do a direct USB connection yet because this seems irrelevant to the question. The network (10.10.10.x) page shows the status of the printer such as "Printer Error".

  FWIW, he showed the same error last week, but a hard reset fixed it on the first try. This time, it does not.

  EDIT: If it helps, the date of the firmware is 20120814. I tried to update to 20150114 via the update utility, but he says that he can not find a serial p1600 printer is installed.

  EDIT 2: the printer will not even turn on. Tried a few different outlets, power strip directly into the wall vs - nothing. I think he's dead. Based on my experience with HP printers, I'm not surprised.

  Hey @dselzle,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you are having problems with turn your Laserjet P1606dn. I can help you with that.

  To start, you will want to make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once's done it, this document will help you with your power problems.

  If you are able to turn on the printer, then that's fine. If it doesn't always turn the printer will need to be repaired. You can contact HP by clicking on this link by clicking on the form below.

  If this resolves your problems so please let other users know by clicking on accept as Solution next to this post.

  I hope this helps and I hope you have a nice day!

• LaserJet Pro 400 M451nw: Laserjet Pro 400 prints documents upside down

  My Laserjet Pro 400 prints documents upside down.  This only happens when you print in black and white, and from certain applications.  Files PDF and Word documents print very well, as plain txt files and files from my accounting software, but files CorelDraw and images in Photoshop CS5 reverse print.

  If I saved a CorelDraw file in PDF format, it will print correctly, but not the native file of COR.

  From Photoshop, it makes no difference what file format I print - jpeg, tif or even a file not saved - all printed reversed if I select black and white.

  Colour printing is fine for all applications.

  Like most of my needs to print b & w, I the printer defined as it as default and just change color when the need arises, but it means I lose lots of toner if I don't remember to print in color in CorelDraw or Photoshop.  Printing an image to grayscale in color also gives the evil eye.

  Any help appreciated.

  Hello

  Try to use a PCL5 driver, which is likely to solve such a.

  First, open the control panel > devices and printers, right click on the printer and select printer properties.

  Open the Ports tab, and take note of the path selected for the printer, and then close this dialog box.

  Download and install the driver HP UPD PCL5, follow the installation by selecting the traditional model.

  Follow the wizard of printwr indicated by selecting the same port as used by the original and complete its installation driver.

  The UPD driver can be downloaded from the following link:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4157320&swItemId=ds_99378_6&swEnvOid=4158

  Once you have finished, try to print using the HP Universal printing PCL 5 driver and check for the difference.

  Please let me know if this can help,

  Shlomi

• HP Laserjet III: The printer does not print

  I have a HP Laserjet III printer that I used with my HP laptop. The computer has Vista Ultimate. The printer has a parallel port only. A parallel to USB cable port was placed on the printer that the computer has no parallel port. Several years ago I installed the printer on this computer and it was working fine until yesterday when I accidentally deleted the printer when I was looking for cancel a print job. I tried the printer function added in the Control Panel, but the test is given a printing error message or disappears without printing. I tried plug-and-play, but the printer is not seen and is not installed. Printer drivers are suspected to be part of windows, but I can't find printer drivers, there is a HP Laserjet III printer installed to LPT1, but this computer has no LPT so not sure how it was installed. Of course, that does not print the printer is not connected to the computer. How can I install this printer to make it work on this computer?

  When you deleted the printer you may have removed the entries between the usb adapter to the computer and the printer.  If you have a disk provided with the adapter which can help you get it going again.  You're dealing with two objects here and it is possible we won't communicate again.  Try another card kind of force the computer to see the new map and help you get the printer working again.  There probably many registry enteries that have been established when you plugged the adapter between the two devices together.  Some of these entries went when you deleted the printer.  One more thing, you can try is to do a restore of the computer to a date before you deleted the printer.  Who will restore the registry at this time and even the printer.  I would establish a restore point before going back just in case you lose something more important with dating back.

• HP LaserJet P3015dn: Cannot print in Arabic

  I'm unable to print Arabic on the IBM AIX printer. Any suggestion please?

  No idea of what you can do in AIX, or how, just a few remarks:

  • The LaserJet P3015dn printer supports the three 'traditional' Languages of Description of Page: PCL5, PCL6 (aka PCL XL), PostScript.
  • I guess that your AIX system generates a print job using one of these PDL; I guess it is likely to be PCL5.
  • If one assumes that generated print jobs use PCL5, you must try know which PCL symbol sets are available and with which fonts (not all games are available in every font).

  Perhaps it is likely that the following symbol sets are available with this printer model (I certainly can't speak for you):

  • 8V = Arabic-8
  • 11n = ISO-8859-6 Latin/Arabic
  • 10V = PC - 864 Latin/Arabic
  • 9V = Windows Latin/Arabic

  It is not necessarily easy to know if these symbol sets is available, or which policies support them.

  You could try to find, using PCL status collating orders, If they are supported by your printer model (I know that the LaserJet 1320n supports them, but a more recent LaserJet Pro colour MFP M475dn does not work).

  The tool of collating the State in the application (Windows) paraphernalia PCL (available through http://www.pclparaphernalia.eu) offers an easy way to check this (you would need to request the extended Police entity type); support, the data returned will be something like:

  

  which shows that my printer (LJ 1320n) supports the symbol sets 0r 5 M, 8 M, 8V, 9V, 10V with the Naskh font (as well as with the Kufi fonts).

  Having established what fonts support which symbol Set (s), you can then use the tool example of fonts to print a grid of available with a particular font characters / symbol set combination.

  ... and with that knowledge, you maybe would have enough information to change your AIX "scripts" (or whatever they are called) for the font / symbol value required to print your Arabic characters.

• Windows 7 cannot print on the HP LaserJet 5 p printer

  I spent about 5-6 hours on this and am pulling my hair out...

  I have a new computer HP w / W7 Home Premium 64-bit.  And I connect to my old LaserJet 5 p via a line parallel to the printer, to a man, 25-pin (DB25), which is connected a parallel cable DB25 female that has a USB port on the other end. USB is connected to the port on the new computer.   The peripheral area is listed as only an "unspecified unknown device."

  I started with W7 canned programs add a printer, setting up devices, download the drivers. Updates to the driver.  When the test print did nothing, so I went on troubleshooting.  So, which went nowhere...

  Then I went to HP, looked through many sites of help Articles/community and finally used their technical support for BOTH the new computer area (had me re-doing the preserved parts, download the drivers through zone devices, once again, and when have not (yet), they suggested I call their "Commercial LaserJet" technician who said...) "It is no longer supported." And if the driver that you downloaded does not work, it is not MS problem, our.  Contact with them. "(Possibly), brings me here.

  I went through the MS canned his fix and downloaded manually from the site of HP (as opposed to automatic download/updates devices), only to get a message... "Windows has encountered a problem installing the driver... error occurred during the installation, because it is not digitally signed or not signed it."  Contact your hardware vendor (IE HP, which does not support)

  Well, you get the picture... I work a pretzel here... MS wrote it's HP, HP says it's Ms... and all I want is to use my printer who worked two weeks ago on my old Compaq!

  Therefore, there is an index HP I found that looks like I might be closer to the problem that said .doc, find an interface IEEE 1284 in your devices and make sure there is no error code.  So, I found IEEE 1394 or something like that (I'm not there now).  BUT no IEEE 1284. Let the only error codes!

  So, I came in contact with the service of HP, and how IEEE 1284 it there instead.  They said they do not know, and it's a problem of Ms.

  So, to dig a little deeper, I found in 'Device Manager' I might add an IEEE 1284 printer... BUT slide it towards the bottom of the list did not have the 5 p. Close, but so far and nothing to update, as in the other area of the device...

  So, I'm pretty frustrated that a HP printer cannot work on a HP computer, even after the download a driver of HP. This is 1284 IEEEE something you can put in place?

  Clues on how to solve this problem would be very, very, very appreciated!

  Thank you

  DRJames

  A driver for the Laserjet 5 p printer is available on Windows Update. See find and install printer drivers

• HP Laserjet 4000 t printer: Laserjet 4000 t false jam - Attention light stays on

  I have an old printer HP Laserjet 4000 t.

  I got a paper jam message , but when I searched carefully there is no paper jam.  I took out the paper trays and raised the lid of the printer, but nothing goes out the light of attention.  I even tried to unplug then reconnect the printer, but attention immediately lights up.  Now the orange attention light remains lit and nothing I assure the printer there is no paper jam, so the attention light does not turn off.   What should I do to get the printer to recognize that there are no paper jams and cut the attention light so the printer can get back to a usable state ready?  Please help me as soon as POSSIBLE.  I'm working on a deadline.  Thank you!

  THANKS davidzuts and SHThompson!

  It was a very good paper jam, but I couldn't find any paper anywhere, and using heavy paper to make out jam was not working.  I went to feedroller.com and looked up the eyes my specific printer.  I tried their troubleshooting and it mentioned ovens and assembled recording, rolls of transfer, sensors, flags, which was all Greek to me.  At the bottom of the list of items that I saw a link to the videos.  I clicked and it took me to YouTube.  There is nothing specific about a for my printer HP LaserJet 4000 t 13,20 paper jam, but there was one called 'how to fix HP printer error 13.20 to 4200 4250 4300 4350 printer HP series'.  I saw and learned how other similar HP printers came out after the ink cartridge came out.  I tried the same rough with my printer and discovered a whole sheet of paper in boots upwards in the roller behind the flipper.  When I took it off the printer immediately turned off the Attention light and returned to the ready mode!  Thank you, thank you, thank you!

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X