LaserJet CP1518ni: Characters unwanted printing

Similar Questions

• Color LaserJet CP1518ni: HP Universal Print Driver for Windows PC (64-bit) will only print black on Color LaserJet CP1518ni

  HP Universal Print Driver for Windows PCL6 (64-bit) will only print black on Color LaserJet CP1518ni

  Also, would like to have the complete software program to download rather than just the universal driver.

  Hello @wyodude

  Try this

  Go to devices and printers and right click on printer properties then go to device settings and go almost all the way down to the type of device a color change and save the changes then go in the printer preferences and in the color tab, make sure that in its unaudited grayscale printing option

• LaserJet CP1518ni on software Mac OS 10.7 for this printer is currently unavailable

  "I'm trying to install the HP Color LaserJet CP1518ni on Mac OS X 10.7.5 and get this error: the software for this printer is currently unavailable.

  Hi Lorel509,

  Welcome to the HP Forums!

  I understand that you try to install your CP1518ni LaserJet on Mac OS 10.7, and I'm happy to help with this installation problem!

  Please see the installation guide. OS X Lion v10.7: install and use the printer with Lion, because I think it will help.

  Hope this information helps you and have a great day!

• My HP Color LaserJet CP1518ni cannot print .pdf files

  Dear,

  I have a printing problem with my HP Color LaserJet CP1518ni (function USB my iMAC), since I installed the OSX Mavericks.

  Although my printer print word files, cannot print .pdf, even through the software PREVIEW or ACROBAT files.

  It gives the break signal... any solution about that?

  It is very annoying.

  Thanks in advance for your comments or help!

  Hi Kpanag

  I understand that you cannot print the PDF files from the upgrade to Maverick.

  I'll be happy to help you with this.

  I check and repair the authorization to drive on the Mac.
  Go on the hard drive of the Mac, applications, utilities, disk utility, click Mac hardrive left side, click on verify disk permissions, when it is finished click on repair disk permissions.
  (when it's over will show disk repair completed)

  Run the Apple updates also. (the Mac uses probably drivers 10.8)

  Make sure Acrobat is up-to-date.

  If you need more simply make assistance let me know.

• Can I solve the problems of alignment is to have my Color LaserJet CP1518ni? Red will not line up.

  Can I solve the problems of alignment is to have my Color LaserJet CP1518ni?  Red do not line up, I installed the latest updates, etc.  Calibration does not help.  The printer is only a few years old.  What gives?

  Hi threre, I just work on HP CP1518ni a client with this same alignment problem as most of you are describing. I went through some process and I think I found one that works... If all goes well it will work for

  You too.

  Things I tried before hand... also this machine has all the toners brand HP 90 + life on each of them.

  -Calibrate - has not fixed the problem (tried once)

  -reset the NVRAM - did not problem

  -removed and inspected print cartrides (no problem found), re-installed - fixed no problem

  The 'fix '...

  First, go to the HP website and download the firmware, make sure you only select the right operating system

  you are using. (for me it was Windows XP) Also the requirements of course read, I think you have to

  have with XP SP2 if it perhaps questions, always read the instructions before doing the firmware.

  Here is a quick link to the CP1518ni...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3422472 & LC = on & CC = US & DLC = in & lang = to & CC = US

  Then, assuming you have the appropriate printer driver installed, double-click the utility you just downloaded and select the CP1518ni from the drop-down list. Now, press the button 'send the firmware '. It will be

  Take a few minutes so just let it do its thing. After that she did try to print something, for me it was NOT fixed.

  Now you want to calibrate the device, maybe 2 or 3 times, on the control panel scroll to the right until

  you see "systemsetup" press ok and scroll to the right again until you see 'print quality' and press ok.

  the first item in this menu is press "calibrate color" ok, now he's going to say 'calibrate now' and press ok one

  last time. It will start the calibration process. Then he did print something new to see how he does.

  for me I had to do the calibration process twice before the quality was normal again.

  Good luck, hope this helps some, I read that some printers still presist even after this process.

• Color Laserjet Cp1518ni alignment no longer work

  I have 2 x Color Laserjet CP1518ni for about three years now. Both printers do not calibrate corretly.

  I have problems with the logos of color printing. I now see magneta shadows as a result of misalignment.

  -J' have Windows 7, where the HP difficulty tools do not work. So I use the buttons on the printer

  -But also trying to calibrate with my laptop with Windows XP on it.

  -Installed new firmware, used each menu item I hoped that might have an effect.

  -Searched and searched on the internet, I found that nothing works.

  -Does someone have an idea to solve this problem?

  Hello

  Follow the instructions below to restore the default settings, and then test the print quality. Let me know what you find?

  http://support.HP.com/us-en/document/c01530973

• HP LaserJet CP1518ni - wireless installation, will now in offline mode after reboot

  I just install my printer wireless via my router and everything was fine - test pages, etc. I rebooted and after reboot, I can't use the printer.  It is "offline." Turn everything off and then does not solve the problem.  The printer is a Laserjet CP1518ni.  It is connected to my router and two computers use wireless. Don't know what to do. Help! Why is it keeps working after the first reboot?

  You can run printing HP and doctor Scan, and it can help with this problem.
  http://goo.GL/u3jDE

  It can also be a firewall or an antivirus which blocks. You can turn it off and try to print.

• Drivers HP LaserJet CP1518ni for WIN7-64

  I have the color Laserjet CP1518ni printer when I had Win Vista-32 and it works beautifully. Recently, I upgraded my OS WIN7-64 and installed the drivers recommended from HP website. I installed the HP Universal PCL6 v5.6.0, but the printer is not recognized as color and prints only in black and white.

  When I restore the old driver 32-bit, I had on vista, it works in color but does not print on the web I get an error message on a competibility of 32 bits.

  Help, please.

  After carefully reviewing the download section for the printer from the HP web site, I found that there is an update of the firmware on this printer and CP1510 version. So I updated the firmware and now it works fine, so far.

  I guess that was the problem.

• HP Laserjet 2840: HP Laserjet 2840-custom color print after Windows update.

  I updated my Windows 8.1 operating system (64-bit) with the provided updates, automatic updates of Windows, about two weeks ago.  After that my HP Laserjet 2840 will not print anything in color.  It copy in color, so I know that the printer still works.  Ayone have any ideas as to why this happens, and yes I tried to reinstall or update printer drivers provided on the HP website.  Still does not work and want a solution or I will throw this printer out the window, literally and buy something new that works with 8.1.

  Updated - with the help of the forum search on another HP Color LaserJet-cannot print in color - I used these steps in this post to solve my problems of color printing.  Please keep this forum so valuable to others who have questions and need to find solutions.

• Problem with printer Laserjet 4 M Plus printer

  I have a Laserjet 4 M Plus printer which I had connected directly to my office with Windows 98.  The printer worked fine with the office.  Well, I've upgraded the desktop of Windows XP and now I can't the printer to print at all. The printer has been added to the desktop, but it will not print a page to test the computer or any program at all.  Your help is greatly appreciated in getting my printer works with XP.  Thank you!

  Message edited by cvanderhoef on 12/21/2008 13:28

  Let this step by step, as we do for the 1st time

  1. set up your printer (cords & cables)

  2. turn off the computer

  3. connect the parallel cable or usb

  4 turn on the computer

  5. turn on the printer

  6. place the disc in

  or install from windows printers list

  Download of HP or

  7. open the folder "default" printer

  8. check the cable port

  example: printer properties

  tab select "Ports".

  9 look for ports using its

  the ports are: "the LPT1 printer Port:

  "USB: printer name?

  Make sure that the port is checked in the box of

  10. click on the "General" tab > "printing preferences...". »

  11. Select "advance" tab tick to set lower resolution

  that i had this problem on one of my printer

  because the high resolution would never print

  12 OK and test print the printer if successful

  13. click OK final

  14 perform the normal functioning of every day as everyday u

  15. good luck

  Message edited by rickp400 on 06/01/2009 12:49 AM

• LaserJet 1022 don't print Windows Explorer 9

  LaserJet 1022

  Windows 7

  When I have updated to Internet Explorer 8 to 9, I can't print with my Laserjet 1022. This printer works with all my other programs.

  I get the following error message: an error has occurred in the script on this page.

  Line: 2126

  Char: 1

  Error: Unexpected call to method or property access.

  Code: 0

  URL: res://ieframe.dll/preview.js

  It looks like IE9 dislikes the print driver for your printer. The fix for this would be to uninstall IE9, or use a different browser like Chrome or Firefox (both linked below). A solution would be to use a different print driver for the printer. These instructions are below. I don't know which driver will work as a good replacement then you may need to try a few. Hope that helps.

  Chrome:
  http://goo.GL/MAqrN

  Firefox:
  http://goo.GL/7ICv2

  To use a different print driver for printers HP with Windows 7:
  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. click on new driver.
  7. click on next.
  8. Select HP in the first list.
  9 select a Laserjet driver form the list. You may need to try several to find a working one.
  10. click Next.
  11. click on finish.
  12. click on apply.
  13. click OK to close the window.

• HP Laserjet CM1415fnw does not print wireless

  Original title: HP Laserjet CM1415fnw

  My printer has stopped printing wirelessly from my PC (but prints OK when connected with a CAT5 cable). My PC is connected to the router (BTHomeHub) wireless, I can browse and enter in the config. My printer says it is connected to the router with the identifier SSID is correct and past Network Test Wireless HP on all points. I got the impression of having a fixed IP address in case it was a DHCP problem and a static IP address reservation in the router. However, in the router settings advanced, the router says the printer is not connected and I cannot ping the router from my PC. It was working fine until recently. Any ideas? THX.

  Hey Kevin,

  What version of the windows operating system is installed on your computer?

  Refer to the steps in the following article and check if it helps.

  HP Print and Scan Doctor

  Printer HP LaserJet Pro CM1415fnw color multifunction - software installation of the product on Windows for a network connection Wireless (via an Access Point)

  Printer in Windows problems

  Keep us updated on the status of the issue.

• HP Color Laserjet 2550n will not print in color?

  My HP Color Laserjet 2550n will not print in color?

  I spent half a day Googling this issue and could not find any solution?

  When I press the go and cancel the 3 test pages print fine in color set button.

  But if I try to print anything from my laptop, it's all B & W.

  I already installed the latest version of PCL5, PCL6 and PS drivers from today:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=388401&lang=en&lang=en&cc=us&cc=us

  None of them print in color?

  I think that is the question:

  http://i.imgur.com/WM8Oy92.PNG

  But, how to fix this?

  My OS is Win 8.1Pro x 64 with all updates installed.

  The colour toners are 100%, black is at 28%.

  rk_russelking: your suggestions have been COMPLETELY & TOTALLY USELESS.

  I found the answer here:

  ... «in the printer properties, select the tab settings of the device, scroll to the very last item at the bottom, which is 'Device Type'.» The value displayed (which of course got auto-installé as a default value, for both PCL6 drivers), is "AUTO-DETECT". You would think that would work, but it apparently does not.

  In any case, by selecting the drop-down arrow, it turns out that there are three available values: AUTO-DETECT, COLOR and MONOCHROME.

  Of course she then had me select COLOR, click APPLY and then click OK. I repeated the process for the other printer PCL6. »

  

  http://i.imgur.com/dxultKG.jpg

• LaserJet M1212nf: HP LaserJet M1212nf will not print, claims paper jam

  My LaserJet M1212nf do not print, and it has never printed. Whenever I have create a print job if printing from a PC, copy something via the scanner, or print a report in the menu, it goes through the following:

  1. Initializes the printer,
  2. During initialization, printer pulls in a piece of paper in the tray,
  3. Paper stops halfway in (seems to me like he already spent fuser, then probably would not print correctly in all cases), then the printer claims there is a paper jam.

  Note, this printer has never properly printed a single page. The number of impressions is zero (0). I've never had a paper jam.

  Note that regards the position of the paper as it is pulled into the printer, I use letter size paper, and the printer menu shows that it has set up to accept size stationery. I confirmed duplicate by checking through the web interface of the printer as well.

  Any help?

  And CV: If I can't get this problem solved, I'll have no value outside of this all-in-one at all. It will have been a large lemon and probably will poison any possibility to buy HP products in the future, including those based on the experience of support I've had so far, which has been zero. I tried to get the official support of the guarantee, but despite me documented proof of purchase, my warranty has been backdated to a until I bought itand now I can not contact technical support via the Web site options. I put in another conflict guaranteed, but on the basis of the likely response time will not get an answer until after a guaranteed year is officially over.

  Gary Dee
  wiseintro.co/deeabson

  Hey @Dee76,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions. Please see the HP Privacy Statement.

• Printer Laserjet 2600n color wrong print

  Hi all

  I have a Laserjet 2600n HP color printer and the problem is that, when printing, the right side of the sheet is rewrinting the upper right part of the paper (sorry if I'm not clear enough, I'm French). I have this picture to help you understand what I'm trying to say. You can see the word "test" in rewriting, even if it is supposed to be only three times on the right side.

  I followed a few topics on the internet and so I cleaned the black box with the mirror in the back, and I remove the ETB several times because what I thought was the problem. But it seems that nothing works. What is a cartridge problem?

  Thanks in advance!

  

  Hello G4bb.

  I understand your concerns. Unfortunately, I need you to lead our Enterprise Business Community Forums. It will be the right section for this problem.

  Good luck.