LaserJet CP2025 color of text printing, I get a shadow/halo around each letter

Similar Questions

• HP Color LaserJet CP2025: Intermittent problem with printer producing pink wide unslightly strips

  I use a HP ColorLaserJet CP2015.  From time to time he overprinted documents with pink ribbons which is unslightly.  The documents can be used only for use in-house.

  It is an intermittent problem and may occur as early as the beginning of printing or begin in the middle of a print job.

  I ran a diagnostic report, but I do not know how to interpret it.

  Any suggestions?

  Thank you

  Alan

  P.S. I'm sure that the printer is out of warranty.

  Just thought that I'll let you know that so far I did not have pink wide overprinting.  It seems that it was a faulty cartridge.  Thank you very much. I would not have thought this.

• HP LaserJet 500 color M551 PCL: printer HP LaserJet 500 color M551 PCL6

  We had our color HP LaserJet 500 M551 PCL6 for a couple of years.  It has worked very well.  For the last two months, it keeps going offline (depending on the driver on the client PC).  He is in fact under tension and most when he's awake.  I was not able to find all the parameters that will keep online via the network.  I logged into the printer to see if I could find all the parameters.  The only thing I found was to tell him to wake up at 7:00 in the hope that it would help connectivity.  It helped, but it has not cured the problem.  I can ping any of the workstations, but they cannot print on it intermmitantly.  We use the Windows7 PC.

  I wonder about the network card in the printer?  I each printer set up a connection direct tcip (as this has always been the freest badly to connect to printers method).

  Only two options work most of the time to get the user online to the printer.  One is to turn off the printer and restart it, then most of the PC will recognize.  The other method is to remove the printer from the PC and reinstall the print driver, which works so far.  When re install the printer driver it auto detects the printer, but not as much as usual is discovered in the process.  Usually, I have to tell him that he has a jetdirect card, etc..  He then makes me to find the driver in it have list under HP disc.  It lasts longer that the other HP printers usually do.

  Any ideas would be appreciated.

  Your information has led me to the solution (I think).  We use a static IP addressing scheme.  DNS servers had changed so much since this printer has been installed.  I corrected them on the printer and wait that will correct the problem.

• HP LaserJet 200 color M251: HP LaserJet 200 color M251 only prints completely black pages

  While in the middle of printing a 24 page document, printed pages went from perfectly readable to completely black (black Coal Mine).  The cartridge is only around the age of 2 months and a lot of toner.   I deleted and reinstalled the printer, but the problem remains.  To me it looks like a hardware problem (circuits) at this stage.  Thanks in advance for advice about the diagnosis further.

  Thanks rb11, I realized these things (support page, etc.) and the problem persists.  I could add the image of the first page that turned out to be totally black when printing.  If all goes well, I can attach a jpeg file, illustrating the speed at which the page went to total darkness.

• Laser color CP1025nw spray: printer does not print

  The LaserJet CP1025nw color does not print when I click on 'print '.  The green light is, as if the printer is ready to print.  Ordinary laser printing paper is properly loaded in the tray.  The black toner is 70% and the three colors are all<10%.  i="" have="" set="" the="" printer="" to="">

  When I click on 'Print' there are no sounds of the printer, however, the green light remains on constantly.  It does not, Flash as it does when you're printing.

  This printer can print grayscale with empty color cartridges?  I am trying to print a b & w text.  If so, what should I do?

  Thanks for any idea that you can provide.

  JBC2

  Hi @JBC2,

  I see that you have problems printing and want to know if you can print grayscale if the colour toners are exhausted. I'd love to help you.

  If any toners and are completely exhausted, the printer will not continue to print until they were replaced.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  HP LaserJet Pro CP1025 and printers color CP1025nw - printing a Configuration Page.

  I have provided a few steps if the problem is software partner.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click Print & Scan.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +.  Then click the Add button.

  How is the printer connected? (USB, Ethernet, WiFi)

  If you appreciate my efforts, please click on the button below the thumbs up.

  If there is anything else I can help you, let me know. Thank you.

• Change color of text connected via a: link &amp; a: hover

  Hi all...

  I have a very basic question about change a COLOR of text-related and get rid of an UNDERLINE.

  Here's what I m tent, definition of CSS rules affecting a: link and a: hover...

  {body
  background-color: #CCFFFF;
  }
  a: link {}
  color: #FFFFFF;
  text-decoration: none;
  }
  a: hover {}
  Color: #00FF00;
  text-decoration: none;

  }

  The problem is, I get my purpose in SAFARI, but not in FIREFOX, in FIREFOX I can still see the

  blue color and underline, it seems one: link rules.

  is there anyway that I can get a universal result?

  Thank you.

  CSS properties you use (quite rightly) in which case links are called Pseudo-classes.

  On a Web page, the links will have 'States' depends on whether they have been, or are being clicked.

  There are 5 links Pseudo-classes (applicable to States different link) at least 4 must be defined (and the order is crucial) so that they work as expected.

  Specify in the following order:

  a: link (Link state not visited = - not clicked - link)

  a: visited (Link state = has been clicked at least once)

  a: hover (Link state = when you hover over a link)

  a: active (Link state = the momentary appearance when you're clicking on a link)

  a: focus is optional.

  The unexpected result that you see is the default value of the browser for a: visited since you have not defined a: visited.

• HP Color LaserJet CP2025dn UPD: Hp color laserjet cp2025 goes into cleaning/calibration in the middle of print job.

  HP Color LaserJet CP2025dn will be printing and stop suddenly and get into the routine cleaning or a calibration for no reason apparent.  This will be the last 5-10 minutes and then resume the print job.  It was produced for each 2-3 pages it prints.  I provide support for a medium-sized company, we are a print HP shop all, we use

  HP Color LaserJet CP2025dn UPD PCL 6. can someone help me solve this problem please.

  Thank you

  You must make changes by using the SAP or box below to tools:

  * Do not change/modify all settings for printer drivers. Let the printer with the default drivers.

  In the System tab and the management of the paper:
  Default paper size: letter or A4 size
  By default paper Type: plain
  Manual feed: Off
  Tray 1 size: any size
  Tray 1 Type: All types
  Tray 2 size: A4 or letter
  Tray 2 type: heavy 111-130g
  Size tray 3: A4 or letter
  Type tray 3: heavy 111-130g

  In document manipulation:
  Select specify time and Action.
  Paper at a time: 0 seconds
  Paper action: substitute

  In the tab system and print quality:
  Calibration of market: 60 Minutes
  The calibration setting: 168 hours

• HP Color LaserJet CP2025 in Windows 7 64 - bit... installed, does not print

  HP Color LaserJet CP2025 / Windows 7 Ultimate 64 bit

  I went through all of the steps outlined on the HP website (has not used the CD of the product, plugged in USB, allow to find the Windows Update driver: the last HP Color LaserJect CP2020 Series PCL6 for 64 - bit indicates in the printer server properties) Windows Fix - it says printer is no problem, only one of the four diagnostic tools/wizards that HP actually provides support this printer (1 out of 4... really!) and only one tool that It is very well... when he's not.

  When I send a job to the HP printer, it does nothing. No job/queue printing is created (the queue is empty... always). So far, a terrible experience... not support for Windows 7 in the basic installation, then any support for this printer HP by HP diagnostic tools. A complete skin... I'm about to go back to Amazon to refund and enter the negative feedback to warn everyone who could expect the support of Windows 7 now and certainly support by HP of the diagnostic tools and of the "wizards" for a real product, HP.

  Someone out there has a similar problem and more important still, a real solution.

  I've tried everything that (before), but I tried again... and not luck. So, I gave up trying with USB and figured out how to use direct Ethernet to my PC. There is no instructions with the printer on it good... seems they are focusing on the use in a LAN environment against a small home/office network. But it works now. Thanks for trying.

• HP Color Laserjet CP2025 does not print the colors in the document

  Original title: print film

  I can't print in collor. I have a Collor HP Laserjet CP2025 and somehow it does not print the prodct in my document.

  Hi DirkjeAbma,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3 color printing fails all printing applications?

  You can see the following HP support article and check if it helps to solve the problem:

  HP Color LaserJet CP2020 printer - image quality problems

  You can also read the following article and check:

  How can I check my ink or toner levels?

  Hope this information is useful.

• HP color laserjet CP2025: no color since the Win10 update

  My Win10 system updated itself lastnight version 1607 (build 1439.82). Before the CP2025 (network printer) worked well. Since the update, she refuses to print in color.

  (Built-in menu CP2025 printed) demonstration page is fine: full color

  Windows all prints in black and white. Printer properties are:

  HP Universal PCL6 print

  Color: No.<>

  Double-sided: Yes

  Clip: No.

  etc.

  Color usage log shows that all the pages/sides were printed in Mono; only one page (the demo page) is reported as printing color.

  How can I tell the printer which is * can * printing color?

  Don't know if this is relevant for your device / driver, but you may need to inform the driver that the device is compatible color.

  I don't have access to a printer LaserJet CP2025 , so what follows shows the device settings tab in the printer properties dialogue for a local Laserjet 1320n printer (which is set up to print with the latest PCL6 UPD):

  

• HP Color LaserJet CP2025 is listed as offline

  Our HP Color LaserJet CP2025 was purchased in mid-November 2011 and worked well since then. I have set up with a static IP address and nobody had connection problems or printing until yesterday. All of a sudden the printer is listed as offline for everyone. A restart of the printer will sometimes allow a print job, and then back to offline. Any time it's connected via USB, it works like a charm. I uninstalled and reinstalled the driver/printer, I updated the firmware, I ran the utility HP diagnostic print and it says all is well, I have it plugged into the various switches and none of them work. I'm lost and ideas. Any help?

  I'm currently running Vista Ultimate 64-bit, but it did appear as offline on the XP and 7 computers as well.

  I thought about it. I put a static IP address on the printer but no has not store the IP for it on my DHCP server has someone else take the address. As soon as I changed the IP address, it was working fine.

• LaserJet MFP M177fw Pro: Pro LaserJet MFP M177fw can't print in color

  I recently bought a new printer and decided to go for the color option. I am wanting to set up so it appears only in black because I only print in color occasionally! I've changed all the settings that I can see and put them in black and white, but always through a program called bistrack, which he still print in color! I've even increased the low threshold of are color cartridges and said to the printer to print in black when the threshold is reached... but still, it prints in color through a program.

  PLEASE HELP SOMEONE!

  Hey @robertsinclair,

  Welcome to the Forums of HP Support!

  I understand that you have problems with printing in black only from your printer Laserjet M177fw range when you use Bistrack. The printer works properly black from other programs, the problem is with Bistrack. I suggest you contact their support solve your problem.

  Either way, I'll mention that the printer still uses a little color when printing in black as a base to give your impressions the sharp looking you would expect from a Laserjet. If the printer gives you a warning that you are very low on a color toner, replace it. This time will keep your bright impressions and will prevent the printer to get damaged.

  Please let me know if this resolves your problems or if you go to a resolution. If you do, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Driver for hp color laserjet cp2025 windows 7 32-bit

  I just bought a refurbished Dell Optiplex 755 32-bit with Windows 7.   I have a hp color laserjet CP2025.  The icon appears in the devices & printers as indeterminate, unknown and yet no model. appears correctly as CP2025.  It has a USB connection that loads a driver automatically.  I can't print a page of test etc.  After I powered the system in place initially I was able to print a test page but after 200 or so updates, I can't do anything with the printer.

  Hi, I don't think that my printer USB of FYI is supported in the latest version of Windows 7.  TNX., Ray

• HP LaserJet 400 M401dn: M401dn not print white text on a black background

  Hello

  We do not print white text on a blackground on a M401dn. I am trying to print a Word document. Prints fine on other printers we have - Brother HL-2240dn, Ricoh Aficio C4501.

  When the work is submitted the HP printer prints a black block. There is no white text.

  Can someone help me solve this problem please?

  Thank you.

  After reviewing your samples in detail a bit more, I suspect that the problem may be associated with the size of the font you are selection (so it would affect black text on white background) rather than being something to do with the colors of text and background.

  With a number of recent models LaserJet Mnnn , a firmware issue has prevented use of the font with a size of 72 points or more.

  These appear to have been fixed with a new version of the firmware - see http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/M401dn-Firmware-Printing-issues/m-p/5008912

• My HP LaserJet 100 color MFP M175nw Gets a 54.2 error message

  My HP LaserJet 100 color MFP M175nw Gets a message from 54.2 error, I thibk something stop them from turning. How to manually turn the toner cartridges to get out? the knob does not work.

  Hi mazz154,

  If any of the cartridges get stuck the carousel could not turn depending on how stuck cartridge is. To move the carousel you must have released brake and then find a place on the carousel to do turn to the next cartridge door. Just make sure that you do not touch the mag of the cartridges ink roller with your finger as the oil on your hands can damage the toner mag roller. If you are unable to follow the procedure described in my previous post due to a jam cartridges you will need to call technical support in 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If your printer is no longer under warranty, you will need to review the document below.

  HP out of warranty of the Support Options for HP select consumer printers *.

  Let me know what you find?