LaserJet M1217

Similar Questions

• HP LaserJet M1217 Wireless Installation on HPG60 Windows 7 64-bit issues with no error message.

  I tried to install a new HP LaserJet M1217 with a wireless connection to my PC (HP G60 with operating system Windows 7 64-bit).  I spent many hours trying to a simple task.  I have not in all instructions and options slowly and kept my concentration without success.  I have the method wireless attempt, the method of USB, the method of attached CD-Rom and downloaded from the HP website.  Always without success.

  I followed the instructions of troubleshooting and always without success.

  I currently have a HP LaserJet P1102's wireless installed.  It works perfectly.  I have a wireless HP7280 all-in-one printer installed prior to my purchase of a new M1217.  I uninstalled the software of HP7280 before my attempt to install the new M1217.

  I don't have any type of error except the computer would stop downloading for all options except the web download procedure.  The web left me hanging with no next steps after being downloaded.

  I'm exahusted after several hours of attempted an installation.  I can get the M1217 print when it is attached to my PC via the USB port.  How can I get to print and scan wireless?

  Thanks for your suggestion.  I had already downloaded the PDF file and followed the instructions without success.

  I received a diagnosis of the HP media card and I was able to complete the installation.

• HP Laserjet M1217 MFP printer - error memory power

  I just install my new printer HP LaserJet M1217. I get the message "Power supply memory error" on the screen of the printer > installed the SW using the HP Smart Install program.  Win 7 is the operating system.

  Thank you very much for your help!

  Hi kongtoy,

  There is a clip on the chip on the cartridge's protective plastic. Remove the orange plastic, and he's going to quit giving you the power of memory error. Refer to figure 6

  Power supply memory error "Message is displayed on the control panel

  

• LaserJet m1217 do not print through easyprint on windows server 2008 64-bit

  We have a client that has the LaserJet M1217 that connects to our window 2008 Server SP2 64-bit via Remote Desktop.  EasyPrint recognizes the printer, but will not display even a test page.  We get a FAILURE message.  We have no more need to know how to print via easyprint, or whether there is a driver that can be installed remotely.

  Hi swmotif,

  This model is only a printer based on the host only and there is no available PCL printer driver. You may not use either universal print driver. I would recommend that you connect the Ethernet printer, and then install the driver based on the host at the link below. If you still experience the problem, you can contact the seller for easyprint.

  Base driver HP LaserJet Hostbased

• LaserJet M1217 MFP nfw: Chromebook nfw Laserjet M1217 MFP scanning

  I have a HP Chromebook and Laserjet M1217 nfw MFP all-in-one printer.  I downloaded the software updated to the printer and print without problem.  However, I can't scan documents.  When I enter the IP address of the printer, there is no tab "scan."  How to scan the nfw Laserjet M1217 MFP by using my Chromebook?

  Hello

  We have checked and there is no Webscan for this model of Laserjet, scanning all is software driven UI.

  Thank you.

• LaserJet M1217 MFP nfw: 10 Windows driver for the HP LaserJet M1217 MFP nfw

  Can't download the driver needed for Windows 10 operation of the nfw M1217 MFP Laserjet.  I tried all the suggestions of installing driver on the website.  The wizzard to install hp does not support the printer. My lap top on that I try the install is a Dell Inspiron 5559. Help, please. Thank you.

  Hi @emtbxs,

  Thank you for visiting the Forums of HP Support with your pilot's request.

  I understand you are trying to install an MFP HP LaserJet Pro M1217nfw on a window of 10 PC but you are unable to download the required drivers. I would like to help.

  I just checked and the software is available for download. You can click here to access the HP LaserJet full feature and Driver download software page. There is a Download"" button.

  When you get the window when he says to choose a method of download, I personally found the method 'Download only' slightly more Strait forward.

  What happens when you try to perform the download. Please let me know.

  Thank you.

• LaserJet M1217: Error Scanner 22 with a Laserjet M1217 on a wireless network

  I just tried scanning a document using the SCAN TO PC.  It has worked well in the past.

  When I launched the scan, the M1217 was presented to work until the moment where the scanner arm normally begins to move.  I heard a 'click' plastic, then I got SCANNER ERROR 22.

  I followed the instructions on the FAQ section; disconnect the printer from the power, unplug the power cord, counted to 15 sec, plugged everything back in and NADA!  Re-error.

  Advice?

  Hi @hadrian9637,

  Welcome to the Forums of HP Support! I read your post and see that you are getting the error "Scanner 22. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please try the steps outlined in this document, they are little different from what you have described, HP LaserJet Pro M1212nf and M1217nfw Multifunction Printer Series - a Message "Scanner Error 22" appears on the printer control panel.

  Please keep the lid of the scanner open and then press the copy button.

  Check if the scanner lamp turns on.

  Also to see if the scanner moves freely through the glass.

  It may be a hardware problem.

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance. Good day! Thank you.

• LaserJet M1217 nfw: error message (no string RO)

  Salvation;

  I'm new to this forum. I'm looking with the help of an expert.

  I use laserjet printer on windows 8.1 nfw M1217 x 64 bit. my printer stop responding after I did a last update of the firmware (20150405) which displays an error message (no string RO).

  My printer is connected as the printer network through a router (usb connection).

  I've updated the software (LJM1130_M1210_MFP_Full_Solution) using the HP installation wizard and after restart windows and followed by updating the firmware of the printer using the installation wizard HP, all of a sudden without doing anything the software gaves a message ' disconnected printer and maybe it restarts or IP changed "while the printer was showing status programming. I didn't touch the printer for 3 hours and message was the same (programming), then I turned off the printer and restarted again, and I found this message (no string RO).

  I think I enter the firmware udate issue although I did the meeting recommended using the HP Installation Wizard, I guess the firmware has not detected the problem before installing the firmware.

  Unfortunetly my warranty period ended last year.

  Any help would be gratful.

  Hi suhail900,

  Yes, I would like to try the update of the firmware again. He may not recognize the printer much. But the last resort would be to reset I sent you in the MP.

  If the problem persists, please call our technical support at the 800-474-6836 for assistance. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you.

• LaserJet M1217 nfw: laserjet m1217 nfw for window 10

  Yesterday I installed Windows 10 and I can no longer print anything with my printer.  I tried to scan doctor and HP Support Assistant, nothing seems to solve the problem.  Any suggestions?

  Thank you

  Hello

  Download and install the latest software of full functionality from the following link:

  http://support.HP.com/us-en/drivers/selfservice/HP-LaserJet-M1200-multifunction-printer-series/4292048/model/4075471#Z7_3054ICK0KGTE30AQO5O3KA30R1

  Kind regards

  Shlomi

• LaserJet M1217: Enlarging on a legal sheet - LaserJet M1217

  I am unable to get the printer to use the whole page when the expansion on legal paper on the LaserJet 1217nfw.  The lower part of 3 inches of the paper is not used.  If I try to change the expansion setting to force the use of this space, the printer truncates just the document.

  Hello

  When you use zoom option make sure you select legal paper in the document in place.

  Go to System Setup > Setup paper > legal ok.

  try printing again and it should work.

  I hope this helps...

• HP Laserjet M1217: Printers print anything

  I have a user with a printer connected via USB.  It was workng fine up until today ' today morning that does not just print.  There are also online, and when you sent a print job it has an exclamation point.  When you try to solve problems, it fails.  I tried reinstalling the driver, but the computer does not recognize it and the installation program will not again.  I installed the HP Universal Print Driver PCL6 and it did not help.  We have tried different USB Ports and a different cable.  After that I restarted the PC it worked and now again after 45 minutes it no longer works.  Advice and or ideas about why it continues to be.  I had a lot of sales reps with the same problem where the pc does not recognize any connected printer.  Please notify.

  Kind regards
  Pislor

  Hi @viju932 and welcome to the Forums of HP! I can help you with your M1217. I understand that you can not print even if the computer says the printer is offline. I see also that you tried the driver universal PCL6, different USB ports, another USB cable, and only after restarting the PC you can get the printer works, but only for about 45 minutes. Please run printing HP and doctor Scan and be sure to let me know the results of the tests carried out.

  HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

  USB: Check that the USB connection from your computer to the HP product works properly.

  Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.
  • Driver: checks the driver missing or corrupt files.

  ·         Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.
  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).
  • Port Match: check the port settings for the HP product.
  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.
  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.
  • Print settings: check and adjust the print quality settings.
  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.
  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source: www.hp.com/go/tools 

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find that the key and the box are both in a green circle.

  • If you see only the Green checkmarks, the tool has not found no problem.
  • If you see Green key, the utility identified a problem and fix it automatically.
  • If you see yellow exclamation points, the test failed and requires monitoring of the user, but the step was ignored.
  • If you see a red X, follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

  If this resolves the issue, please click Accept as Solution button below. If the problem persists, be sure to let me know the result of printing and scanning doctor. Thank you.

• LaserJet professional M1217 nf: cannot scan over network with a printer laserjet 1217 on a Mac

  Hello

  My set up:

  Mac with Yosemite

  LaserJet M1217 more wireless

  Description of the problem:

  I can't scan. Preview, the control panel or image capture, I get the same error saying "cannot open a session.

  I have installed and reinstalled the drivers/printer about 100 times.

  I tried to add the printer/scanner like airprint, or with the name of the printer as a proposed post.

  Just what causes the same error.

  I have the 2.0 version of the driver installed right now. Tried with 1.7, same result.

  I can print without problem since my Mac and my iPad.

  Tried it with an ethernet cable and have the same problem in case someone ask.

  I looked all over google and doesn't seem like someone else has the same problem? Many people have problems printing over wireless, but it's ok for me. Is the scan, I can't go to work.

  Pages of HP does not offer any other driver which has of the Yosemite. HP offers no additional program for Mac and scan.

  Don't know what else to try.

  Little help? Anyone?

  Thanks Geminy02,

  Unfortunately, your suggestions did not help, and I have a few comments about them.
  First of all, your suggestion about the router was the problem is quite impossible, as you will need to check if the ports are open only in the case we're talking about two different network segments. If you have your printer and your computer in the same segment you will have problems of ports.
  Second: if I would have chosen IP protocol to add my printer, I wouldn't take the option scan, as you said, which means I could not done any tests that I mentioned in my original post, and I would never have had to the point of getting the error message.
  Thirdly: the drivers that you MENTION for download are exactly the same as you get with yosemite, so, this could help to reinstall the driver, it's kind of a long shot (and yes I tried).

  In fact, I managed to solve my problem by doing a factory reset of the printer, any sign of a printer in my computer, cleaning and reinstall the printer using the airprint driver suggested by yosemite where to find my bounjur printer.

  I tried ro think what could be the reason, or to see all what I had changed, and the only thing I've seen different in the configuration before and after he started to work was the name of the printer. When it did not work my printer was called simply "printer", when he was working he was the full name that comes by default. It would be very strange, that this is the reason, but I just mention it here just in case someone read. I believe that the factory reset was the difficulty, not the configuration itself.

  Just for the other readers, I can confirm that this unit can print and scan over my wiresless and cable network on yosemite, with the help of preview, capture image or scan property in the control panel. It took me several hours to make it work, but it does, and my best friend was all the time the printers web page, where you can change the configuration of the printer.

• Driver not found on Lazerjet M1217

  I have a wonderful Lazerjet M1217.  When I go to install on a new computer I can't find what he on the priners HP list when I add a printer on the control panel.

  Can I use the drivers for a different printer?

  You can download the drivers for the printer Laserjet M1217 by clicking here.

  I hope this helps.

• name of network failure

  Hello

  I use a printer of nfw M1217. It worked fine with my HP Windows pc wireless 7 up to that I tried to install my old with her also. I think that after I tried to do that, he loses the network connection. When I run the test report what it says there no network name and ensure that I check to see that it matches the wireless router. Help, please. I have installed and uninstalled. I'm trying to figure out how to get the two networks to match again. I also turned off the printer and the router and the computer, but it does not work

  Hi elly77,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you have lost the network connection on the printer when you try to configure computer 2.

  I'll be happy to help you.

  Make sure that both computers are connected to the same network.

  Restore the default values of the printers.
  Select the configuration (key button) on the printer, select network config, select restore default settings.

  On the 1st computer temporarily connect the USB cable from the printer to the computer and go to start, all programs, HP, Laserjet M1217 and select Wireless Setup and go through the wizard to reset back to the top the wireless.

  On the 2nd computer just run the wizard to add printer to install the printer, devices and printers or the printer window. Select the have disk button and browse the CD to complete the installation.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• M1210

  Hello

  HP LaserJet M1217 MFP (M1210 series) nfw

  Mac OS

  New installation.

  Can receive faxes but not send.

  Error message - no response.

  Any suggestions?

  Thank you very much

  Lesley.

  Hi Sean,.

  Thanks for the info, that although overall, does not actually solve the problem.

  However, I am pleased to say that the problem has been resolved and we inform HP. In the interest of completeness, here is the solution:

  The cable of fax supplied with the product was the wrong cable! It was a 4 pin cable, and it should have been a two-prong cable.

  Fortunately my husband keeps all kinds of cables and managed to find a two-prong cable - job done.

  Many thanks and best wishes,

  Lesley.