HP LaserJet M127fn MFP pro: printer works is not after a few days

Similar Questions

• LaserJet M127fn MFP Pro: Printer not connected

  Hi all trying in vain to connect the printer to a wireless router. USB connection to the router; router, Asus DSL N55U; configuration of the router page lists the active printer. That's all. Printer shows on self-esteem / Test as "unrelated", no IP address. What can I do to connect? Thank you very much for your time.

  I have this issue sorted by myself earlier today. Here's what I did. I have reset the printer by cutting the power supply and leave it unplugged for a few minutes. I've deleted all the software my laptop prnter installled. As opposed to the connection via USB, I connected through the ethernet on the printer port to one of the four ethernet ports on my router. Then I powered and immediately noticed a light on the router indicated connection through one of the ethernet ports. My wife came running downstairs to tell me that she could see the printer listed on his iPhone. After a few minutes, I ran a report of connectivity, and it showed connection and TCP/IP connection details. I then installed the software. I am happy to say that he works all famous and we are happy campers.

  Thanks for your help.

• HP Photosmart C5280 All in One printer works is not after the installation of updates

  OP: Problems with my HP Pavilion connect with my HP Photosmart C5280 All in one. Allows to work properly and after running the update something happened.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello iwasbetterbutgotoverit,

  1. do you have an update of the hardware installed on your computer?

  2. what exactly happens when you try to print from the printer?

  I suggest that you try the methods below to solve the problem.

  Method 1:

  I suggest that you run the printer troubleshooter. This automatically diagnose and fix printing problems, installation of a printer, connecting to a network printer and other related errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  As it was working fine before installing the update, I suggest that you do a system restore on your computer.
  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can visit the link to the KB Article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  You can use the System Restore tool to undo the system restore if it does not help.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• LaserJet m225dn mfp pro: printer freezes up, power cord wrong or bad grounding?

  Hello.  We have an ongoing problem with this gel printer (backlight on).  I can say that it's okay if it passes in the standby mode.  If after the default, sleep, standby fails, it is always locked and requires a reboot.

  It comes with the power supply cord is too short, and relocation is very difficult.  I have been using two (seem to be very good) of the longer computer power cords.  One is 10' and the other is 12'.

  I tested the ground taken with a multimeter and it revient.2 v, which is not 0, but I think is pretty close.  There are other things on the same circuit.

  Problem is I can not test the normal short cord and easily keep the printer connected to the USB cord and a fax machine.  Would be a 10 or 12' power cord (no UPS online) will be enough to lock up this printer?   Thank you.

  I found the solution myself.  For a longer length, 14-gauge is necessary.  I have this and it seems to fix the problem.  He could have a blockage, but I'm not sure.  Been working normally for more than a week with this 15' cord

  Cable SF, universal 15 foot cord 14 AWG - IEC320 C13 to NEMA 5 - 15 p SJT 15 has

• LaserJet M125nw MFP Pro: Printer refuses to print the text Document

  Cannot print text in any application on two computers (Windows 7 X 64). (According to request) error messages appear, or at all, nothing happens. Print images, but if the text added to the page (such as WordPad) and then nothing. Print test pages OK and all diagnoses are clean. OK WiFi connection. Suspect Windows problem, but nothing obvious. Have reloaded full pack of HP software.

  Hi turkeytrots.

  I checked the page drivers and it lists all the Windows 2000 drivers. Since you can now print the PDF from Adobe documents, most likely it is a problem with the settings for Word or account on the computer.

  Try the following steps to see if it will be useful.

  Go to start, Control Panel, user accounts, change user account control settings.

  Then drag the slider to the bottom never notify, and then restart your computer.

  What version of Word are you using?

  I have provided a URL on the questions to printing in Word, if the problem persists. How to troubleshoot printing problems in Word.

  Impatience back on your part.

• HP LaserJet M125nw MFP pro: printer HP LaserJet MFP M125nw pro - analysis not through phones android cell phones

  
  
  The current version of the firmware is 20150228

• LaserJet M175nw MFP 100: Print blocks MS Office after printing the first document.

  After printed successfully for the first time, any subsequent attempt to print blocks Word or Excell. I tried the following reading different posts:

  Set up the complete set of utilities HP

  Updated the firmware of the printer now 20140618

  The updated drivers - used the HP utility for this check and update automatically. He ran the delete old drivers app etc.

  Reset all the network settings on the printer - used the HP utility for this.

  The only way to fix the problem, it's the PC. I tried to recover by disabeling and activation of print queue and restart the service of spool printing, no effect.

  I tried to disable the SNMP service on the printer without result.

  I am connected to the printer via the LAN. Another printer running Windows 7 doesn't have the same question.

  When you attempt to print a job it appears in the print queue as "pending" but goes no further and finally blocks Word.

  It has been printing successfully up until a month ago.

  The fixed!

  I uninstalled all the drivers and software and ran the installation from scratch from the DVD. During the installation process, I went to the site and downloaded the Universal PCL6 Windows 8.1 driver 64 and installed. I set the default printer to the universal PCL6 and bingo - I can print several documents.

  That tells me that the print driver for MFP M175 is down!

  Without assistance from HP. I even called support via a phone that has pushed the being at Microsoft.

  Thanks for nothing HP

• Internet and the printer works do not after windows update

  Windows xp, mcafee internet security

  Recently, I ran a windows update and leave my computer turned off.  When you turn it on, the were (are) of the internet and the printer does not.  I went into Device Manager via Control Panel to see if I could turn them on and there is nothing pulling up in the Device Manager.  All documents and are accessible, but I can't even start a new internet connection and cannot print.   I am currently using another computer (more modern) in another room.  I even tried the SafeMode (f8 in the middle) from the model and go to Device Manager and nothing was there.  I just tried to go through the f8 option and beginning to a previous state that worked and I have the same result...  Everything is saved on that on a 350g portable hard drive.  It would just be easier to wipe the hard drive and start over? If so how would I do this reformatting?  Thanks for any advice.

  Michael

  Hello MikeKloss,

  Before you destroy by formatting the hard drive on your computer, I suggest that you do a restore of the system on the computer by choosing a restore point when it was working fine. You can check the link that will give you information about how to restore the system on the computer below:

  http://support.Microsoft.com/kb/306084

• HP LaserJet Pro M127fn MFP: Automatic document feeder does not detect documents loaded on it

  Hello

  I use all of this in one previous machine a few months. Since the last two weeks than its automatic document feeder is not detect documents loaded on it, while it is perfectly flat scanner scanning and printing as well. This machine is connected via a usb cable. I tried all the troubleshooting options available including resetting the printer, cleaning ADF etc etc sensors I also tried the update the bios of the printer, but it does not work for me and feeder is constantly unable to detect documents loaded on it. I searched the whole forum but did not find any message an answer fast and good, therefore, will be highly appreciated in this regard. Thank you

  Hey @Mohsan_IT,

  Welcome to the Forums of HP Support!

  I would like to help you today to address the issue of automatic documents feeder sensor you encounter on your HP LaserJet Pro MFP M127fn. Please include all the troubleshooting steps that you received before you reach out for support. Right now, you have completed all the troubleshooting steps supported in your efforts to solve this problem. If you want to confirm that everything was done correctly, please see the following two positions:

  • Can not copy or scan of FDA (autofeed) on LaserJet 127fn MFP
  • ADF works does not in all new Pro LaserJet MFP M127-M128

  All steps in the discussions that I provided above must be made without success, then the last step would be to perform the programming reset NVRAM on your printer. Now I will send you a private Message with instructions on how to reset the NVRAM. Please check your private Messages for instructions.

  Good luck!

• HP Color LaserJet M177fw MFP Pro - support PostScript?

  Hello

  I am looking to buy a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I am deciding between the following models:

  HP LaserJet Pro 100 color MFP M175nw

  HP Color LaserJet M177fw MFP Pro

  PostScript support is important to me, and I know that the 175 has it.  However, I'm not sure I know the 177, even after digging through several web pages and documents.  Here's what I found:

  -The page of the main form for the 177 says that he accepts "Cffp.  I'm not familiar with this variant PCL, so I don't know how it compares to PCL5 or PCL6, etc..  I have been unable to find more information about "Cffp.

  -The 'Software' section of Page 2 of the PDF Datasheet for the 177 mentions the driver "HP PostScript".  This is the only place where I saw no potential indication that the 177 supports PostScript.  This article also mentions a driver "PCLmS".  I couldn't find more information about "PCLmS".

  -The user 's Guide the 177 refers only to PostScript in an article that refers to ePrint.  However, it does not imply that the 177 itself supports PostScript.

  -Page product specification (in the Support section of the HP site) for the 177 has a "Print Specifications" section which lists only "PCL3 GUI" next to "languages of device.

  I'm guessing that the 177 is not compatible PostScript, but someone has the more definitive information?  Also, is there a description of the Cffp / PCLmS somewhere?

  Thank you!

  Hi Clent

  Here is some information on both printers.

  Here's a url for the printer for Color LaserJet MFP M177fw Pro specifications

  http://support.HP.com/us-en/document/c03901180

  Data sheet also.

  http://www.shopping.HP.com/shopping/PDF/cz165a.PDF

  Fonts and fonts depends on fonts and fonts in OS.

  Print language

• HP Color Laserjet M177FW MFP PRO cannot connect to web services

  I bought a HP Color Laserjet M177FW MFP PRO today and took me to the top. It can print and scan over wireless network. However, it cannot successfully connect to web services. I put the DNS numbers with google DNS addresses. I changed his IP address with manually. The IP address is unique. Normally it is not activate/remove webservices. But when I restart it, it can do for a few minutes. It may take an e-mail address, but it does not print any information sheet. When I try to print a sheet it says "Connection problem" in the first minutes, and later, he said "Connecting" and he expects, there is no error message. What am I supposed to do? Please help me.

  First of all thanks for your help. I solved my problem. After that I sent this message that I've updated my firmware printers and that does not solve the problem. I called HP customer service and they help me. We have solved the problem. My router was the reason for my problem. When I reset to factory settings, the problem disappeared. Thanks anyway. I want to share my solution. Maybe it helps others.

• JJUJ of printing works is not for Iphone 5 s

  I have 5 16GB iPhone after upgrading to IOS 10 to present JJUJ of printing works do not, now I have IOS 10.0.2 still not workng I need ide solution.

  Hello

  Go to settings touch id remove fingerprint and then add impressions back again.

  See you soon

  Brian

• Network adapter (device Bluetooth (Personal Area Network) and Btooth works does not after installing W 7 Ultimate__ (Situation Reported to microsoft Hel and Support under SRX1120597135ID Without solution untill today))

  BTooth works do not after Windows Vista upgrade (Btooth works without problems) for W7
  At the moment I have problems connection BlackBerry device and other devices via Btooth
  messages 1: 'softwarfe device driver was not successfully installed ".
  message 2: "WIDDCOMM Bluetooth Software 6.1.04403 Dell Incompatible" (WIDCOMM = Broadband - manufacturer)
  In short, the list obtained messages:
  1 device driver software was not compatible
  2. incompatible software Bluetooth
  3. the drivers are not installed: lists of codes (31) (28) (10)

  Report of the final situation for Microsoft Help and Support under SRX1120597135ID (withoutany positive response so far, I have been asked to report through this forum, I hope a solution will be here)
  I tried all the options you will find in google without success.

  I contacted Dell and Bradband and I have upgraded to WIDCOMM Bluetooth Software 6.2.0.6600 available in Dell Support without positive results.

  Repost: Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• AutoComplete doesn't work does not after installing IE *.

  AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
  ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
  for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

  sjakulski,
  Thank you for visiting the Microsoft Answers community forum.

  In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

  This should solve your problem.  Let us know if you need more information.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Function keys not working do not after Windows 7 installation

  Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you

  What can I do with this? I want to re install windows. ?

  Hello

  This thread offers you everything you need to install the right keyboard control drivers and utilities for your function keys working again:

  http://www.geek.com/forums/topic/Sony-VAIO-fn-keys-no-longer-work

  Don't forget to keep your model number of the laptop at hand for the page of the driver from the Sony site.