LaserJet M127fn MFP Pro: Printer not connected

Similar Questions

• HP LaserJet M127fn MFP pro: printer works is not after a few days

  Hello I have a printer model: HP LaserJet MFP M127fn pro

  I installed the software and drivers and the printer works perfectly well for a few days and then stops working. I have then uninstall and reinstall the drivers working yet and only a few more days...

  Someone please guide what to do...

  Thank you

  Hi!, guy36:

  Please see... http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Introduction

  Step 1

  Step 2

  Step 3

• HP LaserJet M125nw MFP pro: printer HP LaserJet MFP M125nw pro - analysis not through phones android cell phones

  
  
  The current version of the firmware is 20150228

• LaserJet m225dn mfp pro: printer freezes up, power cord wrong or bad grounding?

  Hello.  We have an ongoing problem with this gel printer (backlight on).  I can say that it's okay if it passes in the standby mode.  If after the default, sleep, standby fails, it is always locked and requires a reboot.

  It comes with the power supply cord is too short, and relocation is very difficult.  I have been using two (seem to be very good) of the longer computer power cords.  One is 10' and the other is 12'.

  I tested the ground taken with a multimeter and it revient.2 v, which is not 0, but I think is pretty close.  There are other things on the same circuit.

  Problem is I can not test the normal short cord and easily keep the printer connected to the USB cord and a fax machine.  Would be a 10 or 12' power cord (no UPS online) will be enough to lock up this printer?   Thank you.

  I found the solution myself.  For a longer length, 14-gauge is necessary.  I have this and it seems to fix the problem.  He could have a blockage, but I'm not sure.  Been working normally for more than a week with this 15' cord

  Cable SF, universal 15 foot cord 14 AWG - IEC320 C13 to NEMA 5 - 15 p SJT 15 has

• LaserJet M125nw MFP Pro: Printer refuses to print the text Document

  Cannot print text in any application on two computers (Windows 7 X 64). (According to request) error messages appear, or at all, nothing happens. Print images, but if the text added to the page (such as WordPad) and then nothing. Print test pages OK and all diagnoses are clean. OK WiFi connection. Suspect Windows problem, but nothing obvious. Have reloaded full pack of HP software.

  Hi turkeytrots.

  I checked the page drivers and it lists all the Windows 2000 drivers. Since you can now print the PDF from Adobe documents, most likely it is a problem with the settings for Word or account on the computer.

  Try the following steps to see if it will be useful.

  Go to start, Control Panel, user accounts, change user account control settings.

  Then drag the slider to the bottom never notify, and then restart your computer.

  What version of Word are you using?

  I have provided a URL on the questions to printing in Word, if the problem persists. How to troubleshoot printing problems in Word.

  Impatience back on your part.

• HP Color Laserjet M177FW MFP PRO cannot connect to web services

  I bought a HP Color Laserjet M177FW MFP PRO today and took me to the top. It can print and scan over wireless network. However, it cannot successfully connect to web services. I put the DNS numbers with google DNS addresses. I changed his IP address with manually. The IP address is unique. Normally it is not activate/remove webservices. But when I restart it, it can do for a few minutes. It may take an e-mail address, but it does not print any information sheet. When I try to print a sheet it says "Connection problem" in the first minutes, and later, he said "Connecting" and he expects, there is no error message. What am I supposed to do? Please help me.

  First of all thanks for your help. I solved my problem. After that I sent this message that I've updated my firmware printers and that does not solve the problem. I called HP customer service and they help me. We have solved the problem. My router was the reason for my problem. When I reset to factory settings, the problem disappeared. Thanks anyway. I want to share my solution. Maybe it helps others.

• El Capitan is my printer Canon Pro 100 'not connected' say any difficulty?

  El Capitan is my printer Canon Pro 100 'not connected' say any difficulty?

  Open Printers & Scanners, select the Pro 100 and remove it from the list of printers by clicking the button "-". Then click on the button "+" to add the Pro 100 again.

  If wrong you again then try to print a reset of the print system. Note This action will remove all devices breeders & Scanners, but not supported drivers, so you just need to add the printer again. To reset the printing system, open Printers & Scanners and rest the mouse pointer over the list of printers. Then right click on (or hold down the command key, then) and select Reset from the context menu that appears. You will be asked to enter your password for the process to continue.

• HP Color LaserJet M177fw MFP Pro - support PostScript?

  Hello

  I am looking to buy a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I am deciding between the following models:

  HP LaserJet Pro 100 color MFP M175nw

  HP Color LaserJet M177fw MFP Pro

  PostScript support is important to me, and I know that the 175 has it.  However, I'm not sure I know the 177, even after digging through several web pages and documents.  Here's what I found:

  -The page of the main form for the 177 says that he accepts "Cffp.  I'm not familiar with this variant PCL, so I don't know how it compares to PCL5 or PCL6, etc..  I have been unable to find more information about "Cffp.

  -The 'Software' section of Page 2 of the PDF Datasheet for the 177 mentions the driver "HP PostScript".  This is the only place where I saw no potential indication that the 177 supports PostScript.  This article also mentions a driver "PCLmS".  I couldn't find more information about "PCLmS".

  -The user 's Guide the 177 refers only to PostScript in an article that refers to ePrint.  However, it does not imply that the 177 itself supports PostScript.

  -Page product specification (in the Support section of the HP site) for the 177 has a "Print Specifications" section which lists only "PCL3 GUI" next to "languages of device.

  I'm guessing that the 177 is not compatible PostScript, but someone has the more definitive information?  Also, is there a description of the Cffp / PCLmS somewhere?

  Thank you!

  Hi Clent

  Here is some information on both printers.

  Here's a url for the printer for Color LaserJet MFP M177fw Pro specifications

  http://support.HP.com/us-en/document/c03901180

  Data sheet also.

  http://www.shopping.HP.com/shopping/PDF/cz165a.PDF

  Fonts and fonts depends on fonts and fonts in OS.

  Print language

• OfficeJet Pro 8625 not connected to the network - no active web services

  Just bought this printer and cannot get the active web services! Keeps telling me printer not connected to the network. Printing and scanning very well. It is connected via USB.

  Hello

  You need to connect the printer to a network in order to enable Web Services, those who will not work with a USB connection, such as those that require an internet connection.

  You can follow the steps below to connect the printer to the network and configuration for the ePrint printer:

  http://support.HP.com/us-en/document/c03721293

  Shlomi

• MacBook Pro 13 inch: Mac Pro does not connect to 5510 e printer

  I have problems connecting with one of my printers.

  My iMac will connect with my printer (an HP Photosmart 5510e and Photosmart 7280) wireless without any problem.  My 13 inch (2009) MacBook Pro connects to the 7280 wireless but does not connect to the HP Photosmart 5510e device.

  I recently had to restart my MacBook and reconnected it to a printer without any problems.  I can't find the driver for a printer so I don't know if the 5510's could not reload when I did the reboot.

  Any suggestions as to what I should have fact/do to recover from the situation?

  @Hahti

  You have installed the driver yet?

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-5510-e-all-in-one-printer-series---B1/5053904/model/5053905

  REO

• HP Laserjet P3015dn: P3015dn pilot will not connect to the printer

  Hello. We provide that HE supports for a number of hotels, and for about a month, we had problems with a number of printers P3015 different properties not being not able to print. This is shared through Windows 2008 R2 servers network printers. The problem when the drivers are installed directly on the computer of the user (Windows 7 Pro).

  The printer is connected and accessed via a web browser. When a test page is sent, no data seems to go to the printer. There is no error in the printer event log. After awhile, an error is displayed for the printer in "devices and printers". There is no specific error given.

  The installed driver is universal PCL6 because there is no specific driver for this printer.

  I would like to know if it is a common mistake that has resurfaced recently. For the moment, we have this problem in 4 separate hotels. P3015s most are a few years old but is new and still under warranty.

  Update: installing drivers PS does not solve it either.

  One of my colleagues managed to solve the problem of despair. Seems the printing services for the port has been disabled on printers. 4 printers in 4 different sites. Don't ask me how it could happen, but that's all you need to do...

  ENABLE 9100 IN MAMT. PROTOCOLS

  

• HP Laser Jet Pro M127fw MFP: HP Laser Jet Pro does not connect to applications so I can't scan

  All of a sudden my printer connects to the apps, so I can't scan. He linked it to the good apps until all of a sudden it stopped. I turned the printer power off and power on. Tried turning off the power applications, then on but it does not connect. I'm connected wireless. What can I do?

  Hello

  Make sure you have the latest firmware to keep the connection of web services:

  http://FTP.HP.com/pub/softlib/software13/printers/IPG/M125/LJM125_M126_M127_M128_Series_FW_Update-20160622_signed.dmg

  The last firmware datecode is 20160622, you can find the current firmware for your printer datecode by clicking Setup > reports > report of Configuration.

  The current datecode is listed in the printer information section.

  Kind regards

  Shlomi

• HP Color LaserJet M177fw MFP Pro - beeps periodically

  My M177fw took to beep once every 8 hours or more. I don't see anything in the newspapers, at least when you look at the internal web server to the device. He tries to point out an error?

  Thank you

  Allen

  Hi @DABJR ,

  I see by your post that the printer emits periodically. I would like to help you today.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Update the firmware of the printer. HP Color LaserJet Pro M177fw MFP drivers.

  Select your operating system, click Next, click the link for the firmware.

  You may need to set the time to sleep and define the sequence of events on the printer.

  Touch control panel:
  1. from the home screen on the product control panel, press the Setup button.
  2. open the following menus:
  The system configuration
  Energy settings
  Sleep/Auto Off after
  3. Select the time for the delay of sleep/Auto Off.
  NOTE: The default value is 15 Minutes.
  4. the product automatically wakes up when he receives jobs or when you touch the screen on the product
  Control Panel. You can change events make the product to wake up. Open the following menus:
  The system configuration
  Energy settings
  Alarm/Auto on events
  To disable a factor of reactivation, select the event, and then select the option.

  This information was given by the manual on page 59. Multifunction COLOR LASERJET PRO.

  If you need help, let me know.

  Have a great day!
  Thank you.

• HP LaserJet M4345 MFP: Network printer problem: cannot print, but can ping

  Good evening

  I have a big problem. We have a network HP LaserJet M4345 MFP printer. It is connected to a switch and the switch is connected to a Modem of Telmex.  It has a static IP address. 5 computers to connect to this printer, but I'm going to use one as a sample.

  The problem is that I can't print anything.

  • I can install the printer in all computers
  • I ping the printer
  • I can access the printer configuration using a browser
  • I can even scan a document

  But I can still print the test page. We have a static IP and it does not repeat the IP address, the host name is unique and date everything is fine. I tried to ping to test for the default gateway and it a ping with a correct response time.  So:

  • The configuration of the printer can be accesed via browser
  • The computer can ping the printer
  • I can scan a document to the PC
  • The printer installs very quickly in all machines
  • The printer can ping the default gateway
  • The IP address and the host name are unique

  What could be the problem? I tried to print in all the machines without success.

  Thank you for your attention.

  It is possible that the network adapter has a problem but since it's your only work around would be to buy a direct jet EIO card and put in the EIO slot in the back near where the network cable is plugged.  They are fairly cheap on ebay and you want to buy a 610N, 615N or 620N one of these models will work.  You must assign an ip address that is different from the one assigned to the integrated card.  I think that there is a way to disable the built in network card, but I have to carry out additional research on that.  If you have an old hp printer that you do not use with a network card eio, even if older 600N it will work in this printer.

• LaserJet m1217nfw mfp - Dungeon print wireless failing / falling on Mac OS 10.7.5

  I installed my LaserJet m1217nfw mfp at least 4 times during the month using my Mac running on OS 10.7.5. The first time was with the CD supplied with the printer, and the last was 3 times with the latest version of the software downloaded from HP.

  Each time, wireless printing is set up and works without a problem (using these official instructions from HP: http://www.youtube.com/watch?v=48mLZoRjJm0). But a few days later, when I try to print the same Mac Wireless, it does not find the printer on the network. And nothing on the network or router has changed.

  It is quite frustrating. I doubt for the 5th time will solve the problem once and for all.

  Any ideas much appreciated!

  Thank you

  Hi SC_W

  I understand that you keep losing wireless connection.

  I have included a document for printer is not maintaining the wireless connection.

  To configure the static method IP go to step 6: your HP product of the assign a static IP address.

  If the printer deposits the wireless again follow step 4: perform a power reset on the HP product and a wireless router and then restart the computer.

  Hope that helps.