LaserJet M276nw - envelopes / Legal paper feed / manual

Similar Questions

• HP LaserJet Pro 200 color MFP M276nw - Duplex / legal

  Can someone tell me how I can print duplex?  Once the computer prints the pages, he invites me to turn the paper.  However, I don't see a place for hand feeding as my old HP printer.

  So, how do I print legal?

  Thank you!

  Here are some great questions.  The laserjet M276nw doesn't have a manual feed slot.  It is necessary to remove the tray paper out and replace the printer page in the status bar to print on the other side for duplex printing.

  Information for this lie in the printer manual, located here.  Take a look at pages 25 and 26.

  Take a look at the picture below to get a better idea of the use of legal size paper in the paper tray.

  

• LaserJet 600 M602 always the default manual feed

  Implementation of a new HP LJ 600 M602dn. print from a workstation running Win8.1, using the Universal Print Driver PCL6 or the specific printer driver. Printer is set up on a network with a static IP address.

  Tray 2 and tray 3 are loaded with letter, plain. All print jobs calls for feeding the paper in Tray 1 unless the manual loading is turned off via the web interface of the printer. Bin sizes can be set using the web interface. Tray 1 is set (automatically) on any size, any Type. I tried to change the settings for 1 drawer under the Board asked to use (first/exclusive) and manual of fast food (always / unless loaded) and no parameter has no effect.

  I want to just my impressions to use paper automatically from tray 2 or 3 and no prompt for manual feed, especially as Tray 1 is not in use (out of paper). Manual power turning off does not seem a good option because I I want to use at a given time.

  Why this set is the default behavior? I want to just print and the printer to process the job without stepping on to him and pressing a button.

  Manual feed should be disabled by default in print settings. Turn it off does not mean that you can not use the status bar, it just does not prompt you to load with paper on each print job.

• HP LaserJet P1606dn: Paper feed 1/3 and printer jams

  I got the impression for about 2 years.  Jams printer after paper feeds about 1/3 of rolls.  I inspected all areas of paper jam.  I think that there are papers torn or other debris in.  I cleaned the rollers with compressed gas area.  Attention no longer flashes when I remove the paper stuck, remove the cartridge and reinsert.  Jam if I feed tray or manual tray background.

  Mystery solved.  I was using an "accountant" Linkyo cartridge.  Just for the hell of it, I replaced it with a cartridge Linkyo and the document without problem.    Lesson learned.

• HP OfficeJet Pro 8630: Trouble legal paper in tray 2

  Hello!

  Thanks in advance for any help you can offer... two problems, I need help. I always use 8.5 x 11 cardstock in Tray 1 and 8.5 x 14 paper in tray 2.

  1. when I print a legal document of the size - and have the setting of the printer, the Auto Select value (for what bin pull) - he STILL has pull Tray 1, not tray 2 (which is the legal document size. I gave up to have auto-select the correct tray, so whenever I choose manually legal under paper size - and tray 2 in order to make it work. How to make this work correctly without haivng to make these changes? Now that's what I'm doing...

  First... Printer Setup/layout page/advanced/legal

  Then... (Printer setting) / Paper Source/tray 2 paper/quality.

  2. my BIGGEST problem is that media type or tray 2 paper type will allow me only to choose "Plain paper" not cardboard. I print color documents full page - so it makes a HUGE difference in quality when I set it to cardstock vs regular paper (to the title of best in the print quality option). It allows me to make this selection to Tray 1 to plain paper, but not for legal reason any.

  Subsequent procedure registration to the first question, if I change the Media Type of cardstock, I get an error saying...

  "There are one or more conflicting settings. One of the conflicting settings is:

  Input tray - tray 2

  Media Type - cardstock

  And then it makes me go back to plain paper for it to print. But when I go on tray 1/letter Sized paper-it works very well. I put legal paper in Tray 1 and tried this way-(legal size, tray 1, cardstock, better) and it prints correctly. BUT, I want it to work with tray 2.

  Any suggestions would be greatly appreciated! Thank you!

  Lauren

  Hey @higgybears,

  Welcome to the Forums of HP Support!

  I see that you have some problems with printing on cardstock from tray 2 of your 8630 e-all-in-one printer Officejet. The reason why you are having problems is that TRAY 2 is designed to be able to handle only for plain paper. HP recommends using only of plain paper in the second bin. If you pass the paper in Tray 1 when you change jobs, you should not have problems with the software.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• LaserJet IIIp accordion pleated paper

  My LaserJet IIIp was a special paper feeding problem.

  It feeds paper out of the slot to eject before without problem, but out of the rear slot, the last third of each leaf looks like a sweet accordion fold or pleated in flange.

  The problem is definitely in the last set of rollers.

  If I eliminate these rolls the feed is good, but the leaf does not come completely out of the machine. (I ran some tests with the lid removed to prove that the entire sheet is printed and smooth (and) all the rolls before the last series comes...

  I don't understand why the first 2/3 of each sheet comes out of the printer smoothly but the third last undulations.

  Does anyone have a suggestion as to the cause?

  Nice to see that some HP products are capable of longer than a few years.

• Dell V305w printer will no paper feed

  My new Dell V305w printer worked fine for a few weeks, but now cannot properly feed paper. He turns and seems to have trouble pulling the paper down. The paper sometimes goes down a few inches and the printer starts to print, but the book isn't far enough into the printing machine. Fortunately, the printer continues printing without paper and then she finishes, but nothing comes out. Sometimes it is said that there is a paper jam. I have remove the partially inserted sheet and try again. And once again. And once again. There is nothing hinder the wheels that I see. I use regular printer paper. I have the same problem with envelopes. It seems like the envelope begins to feed and then stops, as the wheel intercepts her. Sometimes the envelope will go through the printer, but the impression is going to be dragged in off the edge of the envelope. It seems that the wheels do not pull the envelope or the sheet of paper in the machine.

  Justo something old... Take a couple of Q-tips, moisten them with rubbing alcohol, then try to clean the 2 grey rollers inside the paper tray that pull the paper when you try to print. Let the alcohol evaporate, and you're ready to go. Alcohol revives the surface of the roller which was not working because of the dust. Try to keep the printer covered to avoid this problem often. And there you go, fast and simple solution.

• HELP NEEDED PLS EMERGENCY! -All new V313w printer paper feed - and apparently out of warranty already? If no support online?

  I bought a new laptop and printer V313w all-in-one a month ago. and I only turned on the printer for the first time today because of a need to send invitations to an upcoming event.

  I used the printer to print envelopes and about 15 sheets of specialty paper. Until all of a sudden it starts to chew the paper and do not supply through everything in print.

  I check online for drivers and updates and download all the relevant files. Try again and still has the same problem, whenever I have print now it chews paper. in fact, it looks like the print head is ripping through the paper.

  I try to find online for assistance too find that apparently it is already out of warranty?

  Everyone here has similar problems with the V313w? Is really starting to get frustrated, because I can't even contact Dell for assistance as I apparently no guarantee?

  Any help from people out there would be appreciated. I really need to try to get the last few invitations printed. (and I'm not buying a printer in order to 15 pieces of paper! only to have to throw it out and by another brand)

  Thank you in advance.

  Thanks for your reply.

  After about 3 hours of trial and error. (and a lot of paper wasted and torn). I found the problem.

  V313w paper feeding, there are several small curlers who seem to be held in place using small springs. they are really hard to do because there is only one opening to remove the jammed paper. in my case, two of these rolls were lower than the rest. This has created in turn issues when printing because it would interrupt the queue through paper.

  After many difficulties, I finished with a set of pliers tweezers for these rolls in line with the rest of the rolls.

  Because now the printer seems to work, so I just assume that these rollers must have been shaken loose / out of position during childbirth.

  So for anyone having problems similar to the printer not feed paper and ripping upward, then check out these small rollers to ensure that it does not obstruct the paper to move through as expected.

• Mechanism on the paper feed rollers came out HP Officejet Pro 8500

  I tried to fix my printer and accidentally jumped the paper feeder mechanism:

  Now, I can't do it. Anyone know where I can find a manual or video showing how to install it?

  Hi lpage1975,

  It would be too complicated that I suggested you take the printer to nearest service HP close to home center?

  I mean because parts of the roll may be damaged and the best way to who should have the engineer

  Test it as it puts the rear roll in and make sure that it is in full the terms of use before bring you it home.

  In this case things could go wrong. Please use our HP call center to locate the center of service close to home.

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  Sorry I couldn't give you a more simple solution. Hope you'll get fixed soon!

• The Officejet Pro8500 paper feed problem

  The paper feeder does not book directly by moving into the printer.  He also sometimes chew the edges of the paper which it passes.  I followed the advice provided in the manual about to clean the rollers and pad and reset the printer.  I have also assured the paper is correctly aligned in the status bar.  Does anyone have advice?   Thank you.

  Remove the rear door and look at her with a flashlight.

• I can't print from firefox. The paper feeds through the printer but does not print. The same web pages appear when I use internet explore. And the printer works fine with word, Excel etc, but not with firefox.

  Whenever I try to print a page open in firefox it will not print. The paper feeds through the computer, but don't not pring.

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

• Photosmart D7560: The Photosmart D7560 no paper feed

  I bought my printer a few years ago and I have not much used.  I tried to use it today and the paper will not feed.  I tried to adjust parameters, thinking that it would work and still no results.  I even tried the cleaning mechanism cartridge and he gave me the same answer, ' load paper '.  I don't know what is happening.  Help, please.

  Welcome to the HP community @TWhite1980 !

  I saw your post on the 'paper feed problem' you meet with your Photosmart D7560 printer, and I want to help! I would like to start working on this problem of cleaning of the rollers in the printer, as over time, dust and paper debris can build up on the rollers and create this exact problem, you have a.

  To see the proper instructions on how to clean the rollers, click on this link and scroll to the bottom for "third step: clean the rollers ' and follow the steps. You can also try to reset the printer and control of any document that you will see in this guide. (Also use standard simple letter to test print paper size or the copy after you are done troubleshooting).

  A Message appears 'jam or jam' for printer HP Photosmart D7560 h

  Please write me back and let me know the result!

  

• M2Q28A: Deskjet GT 5820 does not correctly print legal paper size.

  The printer does not print correctly if I change the legal paper size it says paper mismatch. a procedure that I didn't change default paper size. then I change th EWS configuration too but the problem is still there. Please help me.

  My operating system is windows 7 and 10 please help.

  Hi @S3dnnie,

  Thanks for getting back to me.

  I was looking at the specifications of the printer HP DeskJet GT 5820 User Guide and it doesn't list legal document as a support for a type of paper supported, but if it has legal papers for a paper Type in the menu drop down, it should be able to print.

  I download and run the HP print and Scan Doctor to check the printer software. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know how it goes or if you need further assistance.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Paper feed

  I have a Deskjet 2050 printer.  Unfortunately, the paper feeds through. I tried the suggestions offered by HP.  Any ideas?

  Normally this is caused by rolls Sales, but it could be something more serious. All what you can do to correct the problem should be defined in the document below. If this does not work, you may need to replace the printer.

  http://goo.GL/hVD48

• How to use legal paper in OfficeJet Pro 8600 Plus

  How can I get my printer Officejet Pro 8600 all-in-0ne take legal paper?  The printer's specifications say it prints legal size, but the tray is letter size.

  The tray can be extended to legal size paper.  Remove the tray and note the blue lever on the left side.  This lever will extend the tray to the legal size.  After having developed the status bar, move the slider to Center to provide the appropriate alignment of the loaded paper.