Similar Questions

• HP color laserjet m451 print 2nd page upside down, why?

  I have a HP Color laserjet m451dn which has a capacity of dulpex automatic. I created a two page brochure in Adobe InDesign CS3. In printing the file, it prints the second page upside. I have front and back on or go back upstairs, the 2nd page is upside down. It does this with my pages of graphics program as well. Can print a Web page, document word without problem [with several pages]. Even if I select "print on both sides" and "Finish" even problem.

  Can I print one page at a time? I'm sure I can, but could someone give me the correct instructions: what [s] sandbox use: ending of paper and how to I insert in the tray (external or internal) which direction?

  Help, please! It makes me CWAYZEE!

  And thanks in advance,

  Ellen

  no_problem wrote:

  Ellen,

  If your M451 prints both sides correctly using your MS word or other Microsoft applications, your problem is with the printing preferences in the Adobe package you mentioned, and unfortunately, I can't learn where your package preferences is that allows you to print on both sides in a brochure format.  However, I can help you with "manually printing two-sided" (at your request).  After you printed side 1 of your two-sided brochure, place the side face upwards in the feeder - the top of the page printed forward or inward toward the direction of advance.

  No thanks no problem [that sounds weird to say; > D].

  I found the solution on my own. As I have said, it was only happening with InDesign CS3 and Corel Draw. I don't think it has to do with the programs BUT, Ta Ta! Here is the solution that I found:

  1. open the print dialog box

  2. After you have put [a journal] in the [set #1] outside bar in the print dialog box, select "Paper Source", then in Tray 1 Manual power.

  3. Select 'Finish' and check "Print on both sides", and then print the first side.

  4. a 'message' on the printer control panel will come [heck, I forgot what he said <> but something to the effect that I should continue the process of printing].

  It allows to print the first side, then pull the paper back and the second part print correctly! YEEPEEEE!

  It worked and if you have a faster procedure, please let me know. Sometimes to find a "work around" and it works, even if it takes more time do you! But if one more easy procedure that is faster and less "hoops" to pass, my boy.  .  .  I'm a game for it!

  Is do what ya have to do, but if a faster easier way comes along, PAHLEEZE! Let me know!

  And thanks again,

  Ellen

• LaserJet M451: How can I buy printer HP Laserjet Pro M451 110V version in the United Kingdom.

  I live in England but would like 3 x HP Laserjet Pro M451 printers 110v version for a project on an industrial site. Where can I buy these in the United Kingdom. If I can can can I buy them anywhere in Europe?

  @SimonW68

  Most of America and the Japan Saudi Arabia use lower voltages (110-127 volts, frequency 50 Hz or 60 Hz).

  The rest of the world uses higher voltages (220-240 volts, 50 or 60 Hz).

  So it's probably anywhere in Europe to get 120-127 volts models you want; You'll probably have to import them from the USA.

  @banhien "all I have to do is to have adapters.

  It's usually pretty simple (and relatively cheap) for consumer devices (which some will probably be dual voltage anyway, so no need to voltage conversion adapters).

  But for trade devices, energy consumption is usually rather higher (e.g., 425 watts for LaserJet M451), a suitable step-down transformer (bigger, heavier and more expensive than an adapter) is usually required to run a model 110-127 volts on power supply of 220-240 volt UK; the transformer may need a much more high-power to deal with "turn on" the surge (I dunno if this is the case or not).

  Apparently, the difference in power supply frequency (50 Hz to the United Kingdom, 60 Hz in the United States) is not usually a problem (adapters and step-down transformers only change voltage, not frequency).

• LaserJet M451: Assembly output duplex

  I have a Laserjet M451, and I like it.  But, I can't understand how collect the copies.  I just print a document of 34 pages, two copies, duplex, and I had 1, 2 Pages and then the Pages 1, 2 again, then two copies of pages 3, 4 and so on.  So now I have to manually separate into two copies.

  Yes, I know that I can print the same document in two different moments.

  However, never in reputable printer maker offers an option of "gathering" in the software, so the software will collect and print a full copy, and print the next and so on until all copies are printed.  Then are then correctly numbered.

  There is no mention of "gathering" in any help document that I can find.  Is the missing functionality that will make me to tell my clients to avoid this printer and its "software?

  The User Guide manual for printers Laserjet Pro 300/400 M351/M451 indicates there (should be) a Collate box in the dialog (Windows) Print :

  

  I don't have Windows 7, so I can't confirm this.

  On my Windows 8.1 Pro 64-bit system, the dialog print for my LaserJet Pro MFP color 400 M475dn (Variant multifunction printer M451 ) fact include such a box.

  A point to note: with some printers (offhand, I don't know if this applies to M451/M475 models), the ordering method depends on whether or not a hard drive is mounted on the camera.

  • If one is fitted, the printer driver needs to send the job to print once, with a PJLcommand (working level) to produce ' is best. the printer stores the job on the hard drive and print copies from there.
  • If it is not available, the pilot must send all the work print ' once (unless it's just a job of the leaf), since it is highly unlikely that a work of several sheet can be stored in its entirety in the RAM of the printer.

  With this mechanism, the printer driver must obviously know (through automatic detection, or through manual property settings) or not a hard drive is mounted on the device

• Color HP LaserJet Pro 400 M451

  Hi, how can I stop someone wireless on my HP LaserJet Pro 400 M451 color printing, for example through. Where and how to configure printing wireless by peope I appoint?

  Hello

  You can specify this by using the Web interface of your printer.

  You should get the IP to do it and you must be an administrator too .once completed, you can select the Security tab and then choose the options that you like to do.

• HP Laserjet Pro 400 m451dn: How can I find a schematic or diagram for my share of m451 HP RM1-8604-000CN?

  Hello

  I have a HP Laserjet Pro 400 m451dn.  I need to replace the whole of the manual feed tray, which I think is part of the whole of the front panel.

  My printer is still under warranty, but I am doing this on my own ("self-help").  I don't want to pay $50 for shipping, and given that the main tray on the bottom still works I use it every day.

  I believe that the façade is RM1-8604-000CN, and I want to assure you that it is the right part before buy you.  Simple, right?

  HP website says I can do this.  However, when I followed the steps, this is what happens:

  (1) I have search for the part:
  

  (2) I click on the link "List of all parts of this product" and find a link for an Assembly of the front panel in the list. I click on it, which brings me to the next page, which has the part number and price:
  

  (3) because I want to make sure I got the right part, I click on the part number (RM1-8064-000CN) and the link brings me to the next page:
  

  (4) the page says I can "choose a product name to view a diagram with your game."   (that's what I want!)  I click on my product link (m451dn) and it brings me to the next page:
  

  (5) it is said to "Select a model number."  My specific model for my m451dn number is "CD957A" so I click on it, and it brings back me to the same page that I started with in step 1).  Arghhh!

  I've lost nearly two hours trying to find the diagram which says that HP is on these pages, and I'm starting to think that HP gives me just the evasive.  They claim to provide "Self-help" resources that do not really exist because they do not want users to help themselves at all.

  I don't want to deal with technical assistance to offshore.  I want to just identify the right part, have delivered to me and install it myself.

  Can someone tell me where I can find a diagram of this part?

  Thank you!

  Jim

  If you bring the printer to a certified support provider who will do the repair it should cost nothing.  Keep in mind that you have to find a provider willing to work on this printer and replace the part because there is a lot of work.  Here is a link to the service manual.

  http://www.lbrty.com/tech/Manuals_HP/M351_M451sm.PDF

• HP LaserJet Color 400 M451/nw: Help I have a HP LaserJet Color 400 M451/nw

  Everything worked fine with my phones and MacBook Air on Airprint but NOW the printer will not hang up

  the new router.  Comcast has installed a faster unit and I tried everything to get it to connect.  It works with my

  HP OfficejetPro 8620 because I can enter the new password and the exact network... but do not allow the 400 HP

  I have to do.  Yes, I turned off the computer... pressed original set of... turned manufacturer new router on and off... hit the WPS

  button on the top... it won't recognize the new system wirelss.  The strange thing?  It appears on my list

  Wifi connections?  I really need help.  I also tried to connect the router with a USB connection?  and the cable wire (maybe stupid)

  but I was desperate so he can work.

  Can someone help me?

  Leslie

  Hallelujah!  This works.  After hours and days by train... I plugged it into the NUMBER ONE slot (had tried before in one

  different slow) and now it works.  I'll just leave the ethernet cable and use that way.

  I thank very you much for help... I could take a little further... and remove the cable and see if it works... but

  going to wait for a while!

  I am so happy.

  Leslie

• LaserJet Pro 400: Watermark not printing on Laserjet Pro 400 on Windows 8

  On the computer of Windows 8, watermark does not print on Laserjet Pro 400 connected by USB. Please note: the function watermark works on other printers not HP, as our networked Ricoh copiers. The printer prints a watermark on a Windows 7 computer. Using the driver package LJM351_M451_Series-12200-drv_installer.

  Very hard to advise without additional evidence (such as samples).

  With my Windows 8.1 Pro 64-bit system, I can print watermarks on my LaserJet Pro MFP color 400 M475dn (equivalent of MFP M451) device.

  Attached is a zip container file:

  • Small text in the abcde.txt file that contains the text "abcde".
  • Print file abcde.prn contains the print job generated by opening the text file in Notepad and by printing the document (using the driver of HP LJ300-400 color MFP M375-M475 PCL 6 (61.120.5.12262) UPD version 5.3.0.12262), by specifying the "SAMPLE" watermark with the default settings; exit 'captured' by using the option "print to a file.
  • Text file abcde.prn_analysis.txt contains an analysis of the contents of the print queue.
  • PDF file abcde_scan.pdf shows a scan of the printed output by sending the contents of the direct .prn file to the printer port.

  Try to send the contents of the .prn file direct to your printer port; for USB connect, you must use something like:

  copy  /b  abcde.prn  \\computer-name\share
  

  in a Windows command prompt session, where:

  the computer name is the name of the workstation;

  share is a share of the Windows printer instance name.

  The resultant prints show the watermark of the SAMPLE ?

  If so, then the printer handles the commands to the printer (in this case using PCL XL) OK.

  Can generate something similar to your driver for analysis?

  [You will probably need help moderating to attach files in this forum].

• Printer Driver HP LaserJet 6 p file

  I'll try to find a driver file for my HP LaserJet 6 p printer, it worked great until I upgraded to MAC OS Sierra

  Thank you for your help

  Try to configure your printer according to this instruction, the problems of printer on your Mac - Apple Support

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• How can I connect my iMac for HP Laserjet CP2025 El captain

  Connection to HP Laserjet CP2025

  Just replaced my printer laser jet CP2025 with a replacement from eBay (given that it works!)  Previously used one daily for a few years without problem, it of the same model but keeps saying printer idle or not connected, even if it has been folded and selected on the screen.  So, I deleted all of the printers in my preferences that I had amassed 6 different printers and use only 2 BUT now cannot add any back? I use OSX El Capitan on an iMac 2013 end suggestions would be appreciated

  This article should help you to solve the problems of printer on your Mac - Apple Support

• I need the Hp Laserjet M2727nf Hp scanning software

  Need a Hp Laserjet M2727nf Hp scanning software

  You really have a classic Mac, a very old machine now.

• HP Color Laserjet: HP Color LaserJet - lines/stripes

  Hello

  I have a HP color LaserJet and I get a lot of lines and streaks on my printed pages.

  I also note toner inside the printer and my printer seems to take cleaning cycles more than before.

  Thank you!

  Although I work for HP, my posts are MY opinion and not those of HP.

  I would recommend some of the things

  First of all, make sure that your firmware is up-to-date, go to the page software and drivers on HP.com download and install the latest firmware available for the printer.

  Then, make sure that the toner collection unit is not complete

  Finally, print a cleaning of the control panel of the printer page, normally, you should select the following text in the menu:

  • Maintenance of the unit
  • Calibration / cleaning
  • Cleaning page

  You can also view this document as well.

  HP Color LaserJet Enterprise M552, M553 and MFP M577 - lines/stripes, toner and cleaning cycles dust excessive

  Hope that helps.

• Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

  I can use WIndows 10 if the fix is available for this OS.

  I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

  Any help would be greatly appreciated.

  Thank you

  Hello

  Install the following firmware for your printer, and then look for a difference:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

  Kind regards

  Shlomi

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex