Color HP LaserJet Pro 400 M451

Similar Questions

• Color HP LaserJet Pro 400 M451dw - error # 49

  We have the above printer. It has been working well for a long time now. It is configured with the ethernet cable.

  At this time, however, when the main user of the printer turns to for use, he first gets up says 'Ready', opens with the IP address then displays "error 49" "turn." This does not seem to do anything.

  I found a post that suggested by ensuring that the printer was not showing in the DHCP, and I do not see here.

  If anyone has any suggestions, please let me know. This is a printer that is much used by the primary user.

  Thank you.

  49 error usually means a firmware error (which could be due to a problem of trainer), but in some cases, it may be invoked by a sending system a use of "punk" (not necessarily a conventional print job) to the device.

  See thread http://h30499.www3.hp.com/t5/Multifunction-and-All-in-One/LJ-Pro300-color-MFP-M375nw-Power-cycling-displays-quot-49/m-p/6348735

• M475dw multifunction color HP Laserjet Pro 400 - 49 Service error

  I get the error "49 service error" when printing any PDF from adobe acrobat reader document is DC

  If I print the same document from the same network share on the same printer using the player of acrober (no), it prints very well. Go figure.

  PDF is adobe.  First thing would be to update the firmware of the printer or change the PostScript driver from adobe.

• Color LaserJet Pro 400 M451dw: automatic duplexing of color M451dw LaserJet Pro 400 does not work after upgrade Windows 10

  
  

  This seems to be a problem with the printer driver, so uninstall and reinstall should be attempted.  You can use the latest version of the complete software available for download on the following HP web link:

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462&swLangOid=8&swEnvOid=4192

  Other possibilities are related to problems due to the unsuccessful upgrade OS or related aspects should also be checked

• Color HP LaserJet Pro 400 Prin: What are the functions of the printer HP LaserJet Pro 400 M451nw color?

  I had just intalled and set up this printer. Yes, I can print and no problem. But my question is, it can only print or it can do something else like scanning and photocopy-ing? I have not found the explanation in the manual book.

  Hello

  It is not a printer Multifunction (MFP), it is not an all-in-one (AIO) printer so it can print only:

  http://WWW8.HP.com/us/en/products/printers/product-detail.html?OID=4346035#! tab = specifications

  Kind regards.

• LaserJet 400 ColorMFP M475dw: Problem of power cord for m745dw multifunction color HP LaserJet Pro 400

  I'm trying to find the number of pieces of the electric cable.

  My warranty expired on 6 December 2014.

  My power cable is flaky.

  When I move a bit the the line cord with the output plug, my printer would turn off and turn on again.

  If I move the power cord a little by the power printer connection, power remains standing.

  Can anyone provide me with the part number of HP for the power cable?

  Thank you

  Yucaipa

  This printer uses a standard pc power cord.  All power cord printer or standard pc with 3 connections will work fine.  I just hope that it is the power supply cord and not taking on the printer.

• grinding noise when my HP LaserJet Pro 400 color MFP M475 calibrates

  When my color HP LaserJet Pro 400 MFP M475 recalibrates, I get a grinding or gear sliding noise.  No idea how to fix it or what to look for?

  Noise problems are difficult to troubleshoot remotely and they could easily mislead even when we are near the unit.

  Please confirm if the noise is a squeak or a noise squeky/hum.

  As you mentioned that this happens only during calibration, it is why I suggest you to double check & validate your toner cartridges.  Among the toner cartrdige is maybe defective and causing this problem.

  If not the toner cartridge, then it would be one of the components of hardware printer that is at issue, where a Tech HP may need to perform a physical inspection of the aircraft and the error condition.

• HP LaserJet Pro 400 color M451dn

  Hello..

  I just want to know if I'll be able to print using color HP LaserJet Pro 400 M451dn, even if a toner is empty.

  Need to answer you as soon as possible... IM planning to buy one. Thank you

  If one of the (black) toner cartrdige is complete, then printer stops printing.

  You can continue to print with black, if one of the color cartridge is very low.

  Please check the following link for configuring power settings to use & their meaning (System-online power settings Setup Menu) HP:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/learnUseDisplay/?sp4ts.oid=4346082&spf_p.tpst=psiContentDisplay&spf_p.prp_psiContentDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03257478-4%257CdocLocale%253Den_US&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• LaserJet Pro 400 color m451dw: printer Laserjet Pro 400 color m451dw for window 10 drivers

  I can't find the drivers for a m451dw Color Laserjet Pro 400 running on Windows 10.  The only available operating systems are Mac.  Is there another place to look for drivers window other than the drivers regualer section 10?

  10 64-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4192

  10 32-bit Windows

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462 & swLangOid = 8 & swEnvOid = 4191

  ------------------------------------------------------------------
  Say 'Thank you' by clicking the Bravo (Thumbs up) button in the post helped you.
  Please indicate the position that solved your problem as "acceptable Solution".

• laserJet Pro 400 color: printer

  Hello Mr President
  I want a help on your part I have a Color LaserJet Pro 400 m475dw MFP
  and when I turned it on. I show masseage like this {10.1002 electric memory error}
  How can I solve this problem, Mr President

  Hello Sir,

  The error that you expose is a problem with one of the toners.
  The magenta to be precise.
  
  In this case, the recommended action is to replace the magenta toner with an original RESUME.
  
  Kind regards

• Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website

  LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi

  Using IMAC OS 10.8.2 with all updates

  Netgear DGN2200v3 router using

  Printer not connect to the HP ePrint website

  Printer connects using Hp and profile for fax set up etc.  But the "HP Web Services" article when enrecorded and hit the Activate button - it does not connect to the site - it seems just to refresh.

  "If I try to connect thro the printer not the imac and try to activate the web services, it says" connection "on the screen BUT after a few minutes of trying - so says" CONNECTION ERROR - the printer is unable to connect to the service. Check the internet connection

  ANY IDEAS - HAVE I MISSED SOMETHING?

  Thank you very much

  I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.

  The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast.

  Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". Then click on IPv4 in the left column; who will bring to the top of the address configuration page.  Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. You don't fill the part entitled WINS server, which can be left alone.

  You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. Then click 'apply '.

  Power cycle the printer. Turn off the power, wait 30 seconds and then turn it back on. Once it is fully operational, try again to connect to web services.

• Help! My M475dn MFP HP LaserJet Pro 400 color printer will NOT print!

  HP LaserJet Pro 400 color MFP-M475dn-CE863A

  Printer on a network and can connect to multiple computers that include: Mac OS X, Windows 7 and Windows XP.

  When I try to print from my iMac, the print queue of the printer says "the printer is not connected.  When we try to print from Windows computers, it is in the right queue and does not print.  When I go the printer itself and try to print a page of demonstration or page supplies directly to him, it says on the screen which is printed, but nothing happens.  This is not hum or anything!  The port where the network cable is connected is switched on green that says HP which means that the network cable is connected.  We've had this printer for a year now, and something like that never happened.

  I did not have any software or anything like that until this happened.  It was working fine on Saturday when we used it, but when we arrived at work today, he just decided that it would interrupt printing!

  I'm puzzled!  I tried 'ping' IP address of the printer from my iMac and it pings fine.  Does anyone have advice?

  (I tried to make of the obvious like too switch the printer on and off and shutting the computer down and nothing!)

  Okay, so I feel a bit stupid right now.  I decided that I would be closed the printer for about an hour to see if it was there, and what you know-it has been!  I had to turn it off several times before but I guess it wasn't long enough.  What a pain!

  Thanks to everyone who took the time to read this!  Sorry to waste time everyone!

• turn off the broadcast without wire - HP laserjet pro 400 color mfp m475dw

  How do I disable broadcasting SSID for HP laserjet pro 400 color mfp m475dw.  I disabled the configuration via the web console wireless printer, but it is still broadcasting.  I also updated the firmware to 20131028 last available.

  Since it is wiered one of the scenario, I could solve this with the help of the HP Support is by doing factory reset/NVRAM reset the unit by turning the printer and holding right arrow and cancel on the touch screen of the device (cancel is on the lower right of the touch screen on the black area and right arrow is just above him (one in the middle of the Panel) in the same black box) and the device of turning on until the message something like storage reset... is displayed and can release the two buttons/zone button.

• HP Laserjet Pro 400 m451dn: How can I find a schematic or diagram for my share of m451 HP RM1-8604-000CN?

  Hello

  I have a HP Laserjet Pro 400 m451dn.  I need to replace the whole of the manual feed tray, which I think is part of the whole of the front panel.

  My printer is still under warranty, but I am doing this on my own ("self-help").  I don't want to pay $50 for shipping, and given that the main tray on the bottom still works I use it every day.

  I believe that the façade is RM1-8604-000CN, and I want to assure you that it is the right part before buy you.  Simple, right?

  HP website says I can do this.  However, when I followed the steps, this is what happens:

  (1) I have search for the part:
  

  (2) I click on the link "List of all parts of this product" and find a link for an Assembly of the front panel in the list. I click on it, which brings me to the next page, which has the part number and price:
  

  (3) because I want to make sure I got the right part, I click on the part number (RM1-8064-000CN) and the link brings me to the next page:
  

  (4) the page says I can "choose a product name to view a diagram with your game."   (that's what I want!)  I click on my product link (m451dn) and it brings me to the next page:
  

  (5) it is said to "Select a model number."  My specific model for my m451dn number is "CD957A" so I click on it, and it brings back me to the same page that I started with in step 1).  Arghhh!

  I've lost nearly two hours trying to find the diagram which says that HP is on these pages, and I'm starting to think that HP gives me just the evasive.  They claim to provide "Self-help" resources that do not really exist because they do not want users to help themselves at all.

  I don't want to deal with technical assistance to offshore.  I want to just identify the right part, have delivered to me and install it myself.

  Can someone tell me where I can find a diagram of this part?

  Thank you!

  Jim

  If you bring the printer to a certified support provider who will do the repair it should cost nothing.  Keep in mind that you have to find a provider willing to work on this printer and replace the part because there is a lot of work.  Here is a link to the service manual.

  http://www.lbrty.com/tech/Manuals_HP/M351_M451sm.PDF

• LaserJet Pro 400: Watermark not printing on Laserjet Pro 400 on Windows 8

  On the computer of Windows 8, watermark does not print on Laserjet Pro 400 connected by USB. Please note: the function watermark works on other printers not HP, as our networked Ricoh copiers. The printer prints a watermark on a Windows 7 computer. Using the driver package LJM351_M451_Series-12200-drv_installer.

  Very hard to advise without additional evidence (such as samples).

  With my Windows 8.1 Pro 64-bit system, I can print watermarks on my LaserJet Pro MFP color 400 M475dn (equivalent of MFP M451) device.

  Attached is a zip container file:

  • Small text in the abcde.txt file that contains the text "abcde".
  • Print file abcde.prn contains the print job generated by opening the text file in Notepad and by printing the document (using the driver of HP LJ300-400 color MFP M375-M475 PCL 6 (61.120.5.12262) UPD version 5.3.0.12262), by specifying the "SAMPLE" watermark with the default settings; exit 'captured' by using the option "print to a file.
  • Text file abcde.prn_analysis.txt contains an analysis of the contents of the print queue.
  • PDF file abcde_scan.pdf shows a scan of the printed output by sending the contents of the direct .prn file to the printer port.

  Try to send the contents of the .prn file direct to your printer port; for USB connect, you must use something like:

  copy  /b  abcde.prn  \\computer-name\share
  

  in a Windows command prompt session, where:

  the computer name is the name of the workstation;

  share is a share of the Windows printer instance name.

  The resultant prints show the watermark of the SAMPLE ?

  If so, then the printer handles the commands to the printer (in this case using PCL XL) OK.

  Can generate something similar to your driver for analysis?

  [You will probably need help moderating to attach files in this forum].