LaserJet P1505n and Snow Leopard

Similar Questions

• Can I run the Mavericks and Snow Leopard on my MacBook?

  I have a mid-2009 MacBookPro (4 GB of RAM, 2.26 GHz) running Mavericks 10.9.5. I wish I never upgraded to Snow Leopard and was planning go back from iTunes (12.3.1) is now unable to find my library when I copied the files to my Time Capsule to a new HD post with the intention that the HD Ext. would be the new home for my iTunes library. I researched how to change the location of the library and followed the instructions but no luck. Many people, including my local tech, have suggested that this is because the Mavericks and editions of the latter to iTunes doesn't play well with my old MacBook and it has been suggested that I come back to Snow Leopard. I'm ready, but use the latest version of Aperture requiring (3.5.1) of the Mavericks, and given that Apple no longer supports opening there is no way to get 3.2.4, which is the last version that can run on Snow Leopard.

  I'd be able to keep the Mavericks and use it only if you use Aperture while being able to install Snow Leopard, and use it for everything? My MacBook seems better to work on Snow Leopard but opening works well on the Mavericks.

  I suppose that if I went down to iTunes 10.7 it would automatically get upgraded to the top without asking my permission, so there is no interest in any downgrades iTunes and it works on the Mavericks as a possible solution.

  Boot from the DVD and use disk utility to create a new partition on the internal drive. Install Snow Leopard. You can then start in which operating system never sought.

• Analysis of the problems with C309G (wireless) and Snow Leopard 10.6

  iMac with OSX 10.6 (Snow Leopard)

  C309G-M put in place on the WIFI network

  Latest drivers installed

  Scanning does not work with preview or Capture of Image or the HP-Scan utility. Overview analysis always selects a portion of the A4 page even when the option is not checked. Is this a bug in the driver, or is there a workaround?

  You can try to uninstall HP in this way:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• Creative Suite 4 Design Premium and Snow Leopard

  Hi Gang

  I know what Snow Leopard first came out in 2009, there were the problems of crashing with CS4. Does anyone know if Creative Suite 4 Design Premium will work in 10.6.8 (Snow Leopard)?

  Thank you

  CS4 on 10.6.8 should run. Same CS6.

  But you can trial it and remember. CS4 products download

  Gene

• CS2 and Snow Leopard?

  My mac (G5) is out of service. I am waiting for a kernel of mac pro 8 But I always work with Photoshop CS2 and can not buy the CS5 today. Is the CS2 can run on Snow Leopard and this mac pro?

  Thank you

  CS2 is designed only for PPC. It will run on an Intel Mac by Rosetta emulation, perhaps slower than on your G5.

  It is a great time to consider an update to CS5, especially given that you will not be able to upgrade to CS6 in CS2.  (or stick with PPC Macs continue to run CS2)

• Why can I not print to CS5? Mac and Snow Leopard

  I can't print of CS5. I have a Canon Pro 9000 MKII, and all drivers are up to date. Whenever I need to print I have to close the image and then open it in CS4. I have an iMac under Snow Leopard and you can print from other programs.

  When I try to print from CS5, I get a dialog box (see table). If I click on the button 'Cancel' (the only option) print in the menu command is dimmed until I restart CS5. Any thoughts would be appreciated.

  

  It also fail after deleting photoshop preferences (command-option-shift waiting to launch), and then create a new file?

• Dreamweaver and Snow Leopard

  I recently did a new install of snow leopard, and every time I open Dreamweaver CS4 her bouncing dock icon, and then it closes. No error from Fireworks or Snow Leopard. Any ideas for a fix?

  Look in your user/Library/Preferences/com.adobe.dreamweaver-10.0.plist

  Is the first dump file. Then in the library, there is an Adobe Dreamweaver CS4 prefs file.

  It these two don't do it, search for other files from Dreamweaver.

• Epson R2400 (and perhaps other Epson printers) and Snow Leopard: a Solution

  I installed Snow Leopard over the weekend and everything seemed to go well, except the re-installation of my Epson R2400.  It did not work.  The Epson Web site provides assistance for the R2400 snow leopard, but it's counterintuitive.  The following will save time.

  First unplug the printer from the computer.

  Then go to Preferences Mac system, printers and faxes and delete the printer Epson of the list.

  Thirdly, put your Snow Leopard disc into your Mac and when the dialog box appears, folder select optional facilities (or something like that - I do not have open right now).  Then check Rosetta and install it.

  Fourth, access the site Web of Epson.  You will need to download a new set of drivers.  Here is where it gets counter-intuitive.  Looks like you should use the first driver and utility package in the list, which is referred to as the Combo package.  It refers to Snow Leopard (10.6) and it is the most recent.  But you would be wrong using this simple logic.  You want to what is now the second driver in the list - v.57 print driver, which also meets the system requirements.

  Fifth, v.57, download install it, reconnect your printer and it prints very well (I only made an impression so we'll see).

  I don't know if the other high range Epson printers contain instructions on the wacky way, but if you are faced with a choice between a simple and a combo pack, you can try the simplest one first.

  Hope that that someone saves time and aggrevation.

  Jack B. Siegel

  PS this is not a new driver written for Snow Leopard - which can sometimes go down the road or not).  This, so I am told, is a Power PC driver and Rosetta (as in Rosetta stone) is a utility that converts so that it can be used on an iMac.

  As a consumer, you should hate Epson.  They, like the world, knew that Snow Leopard was at least a year.  Now that they should have all new drivers and this should have been developed so that people didn't have to call technical support (a waste of time and of their of).  As the Epson R2400 is interrupted, they apparently are not required to provide the premium service and updates for it.  I bought mine about a 1.5 years.  They should not give up products that quickly after their abandonment.  As far as I know, they come out with a new printer in this price segment every two years.  I should not have bought a new printer every two years.

  But as I said to myself yesterday as I struggled with the problem: if I can't print, I can't buy ink.

  It's great, thank you very much. Works perfectly.

• CS3 and Snow Leopard

  Hello

  I want to improve my operating system (10.5.8) on my iMac. My Adobe Creative Suite CS3 will still work with Snow Leopard?

  Hi @TheWebbs,

  Please see the thread: http://forums.adobe.com/message/4581725 .

  Kind regards

  Romit Sinha

• PSC 1210 and Snow Leopard

  That's what I've done so far - unfortunately without success.

  Uninstalled all HP pre - SL software. Downloaded the latest driver from HP for my PSC 1210. Driver installed. Restarted the MacBook and connected the printer.

  The pilot appeared to acknowledge that the printer is connected/disconnected.

  Tried to print a simple document to MS Word for Mac / Adobe Pdf / listen to extracts; the printer driver starts and loads the document in the queue then nothing...

  Since then I repeated the installation process twice. Still no luck.

  Any help would be appreciated.

  Thank you.

  Have you deleted and added the printer in the print queue?  Let's try it:

  -Sys Prefs, Print & Fax

  -Select the printer in question and click the sign less down the list

  -Select the sign and add it again.

  If this does not work, do the same thing, only instead of the second stage, right (control), click the box of the print queue and select Reset Printing System.

• Running Snow Leopard and Mavericks, MBP 2009

  I have a MacBook Pro mid-2009 (4 GB of RAM, 2.26 GHz, 160 HD) which is running Mavericks (10.9.5). I have problems with iTunes (12.3.1) find my library since I copied the files to my Time Capsule to an HD station. I have researched and followed the instructions, but my library, but cannot be found on the disc, and also he will not find on my Time Capsule or other.

  I thought I would downgrade to Snow Leopard, but opening (3.5.1) should Mavericks. Now I think running two Mavericks for when I need to use Aperture and Snow Leopard for iTunes and most everything else, because it seems to play more enjoyable with my MacBook.

  How would be better in this respect? My Aperture library and iTunes are on a 4TB post HD all is supported with a second to 4 post HD. I'm a newb when it comes to such things. I read that "performing two partitions or drives multiple is the best way to handle this and provide most compatibility as opposed to virtualization". Someone said as I could "boot from the DVD and use disk utility to create a new partition on the internal drive. Install Snow Leopard. You can start and then in what operating system never desired. "I guess that means that two partitions on my hard drive or an OS on my HD and the other on the ext HD.? If so, what would be better? Could I put the Mavericks on the HD Ext. and Snow Leopard on my MacBook HD?

  To complicate matters, I live in America where Macs are rare. I know that in my city of 1 million a Mac tech. My Spanish is good, but I don't speak well, even in English, computers and looking for advice or ideas before you have the tech to do anything, thinking that he can just do everything is faster and more convenient for him. I also wonder if I can do it myself, since I have backups Time Machine going back to before I installed the Mavericks, but would probably have a tech do it anyway. I just want to know what precisely I would ask him to do.

  As you say, your options are either have multiple partitions on your internal drive OR install the OS 2nd on an external drive.

  [EDIT]

  If you have multiple partitions on your internal drive...

  • You can run lack of disk space on one or two partitions according to what you save on partitions
  • It is convenient because you do not have to carry another device with you.
  • If a disk fails, you lose the two partitions

  If you install 2nd OS on an external hard drive...

  • you will have more disk space for the two operating systems work with
  • less convenient, because you will need to have the external drive to use OS 2

• How can I update Snow Leopard 10.6.8 for Sierra

  System: Macbook Pro mid-2010 and Snow Leopard 10.6.8.

  How update for Sierra when El Capitan is no longer available in store

  and the message says that 10.7.5 is required when you try to download Sierra from App Store?

  Use this App Store link:

  https://iTunes.Apple.com/app/OS-x-El-Capitan/id1147835434?MT=12

  Notice at the top at the opening of the page it is specifically for Snow Leopard users who want to upgrade to Sierra. You must install this version of El Capitan first, then install Sierra.

• tranparencies printing on laserjet p1505n

  I have a laserjet p1505n and would like to know if the printer can print on transparency

  Hello

  The answer is Yes as shown in the following link:

  http://h10010.www1.HP.com/wwpc/ca/en/SM/WF06b/12144670-12144918-12144920-12144920-81083412-81083477-81086272.html?DNR=1

  Types of media supported
  Paper (laser, regular, photo, vellum, rough), envelopes, labels, cardstock, transparencies, postcards

  Kind regards.

• Snow Leopard 10.6 running as a virtual machine under Lion problem

  Hello!

  It is the first time I'm trying to merge.  I read a post that was now possible with the new release of the Fusion to install the version no of OS x Server Leopard and Snow Leopard.

  I downloaded the trial version free and started the merger... Inserted my Snow Leopard 10.6. DVD retail, but I got the msg that Mac OS x Server is not the guest operating system.

  How can I install it?

  THK.

  Is the post where I read the article: http://arstechnica.com/Apple/news/2011/11/VMware-Fusion-users-can-now-install-Leopard-Snow-Leopard-in-VMs.Ars

  This article was written during the brief window where you * might * install SL customer in a virtual machine, before Apple explained their license agreement with VMware.  It is not possible, because it is a violation of the policy of Apple.

• [AS] Why not work object reference for each line of text with Leopard/Snow Leopard style

  script extract, in CS5 (but have the same problem with the version of the script for CS3):

  say theDoc

  ...

  tell theStory

  ...
  the value question (object reference each text style Beach where the style police is in boldStyles)

  In Tiger, it would generate a list of ranges of text, such as "character text 64-character 110 text stream code 55110 document"thisdoc.indd"

  Under Leopard and Snow Leopard, I get an error: can not get the object reference

  I did not write the original screenplay and I can find a solution by looping through the styles in the list but this good word seems to be better, if I can make it work!

  Thoughts?

  Thank you!

  It works in CS4 on Mac OS 10.5.8 Intel:

  Tell application "Adobe InDesign CS4"

  say 1 document

  say page 1

  say the text block 1

  tell of the history of parent

  the value question to (object of each text style reference range) which police style is in 'mainstream '.

  end say

  end say

  end say

  end say

  end say

  Which returns:

  { of character 1 to 22 character text 236 of the identity document 'Untitled 1' history application "Adobe InDesign CS4", text of character 23 to 23 character 236 of the identity document history "Untitled-1" application "Adobe InDesign CS4", text of the character 48 to 48 character 236 of the identity document history "Untitled-1" application "Adobe InDesign CS4", text of 49 to 62 character character 236 of the identity document history "Untitled-1" application "Adobe InDesign CS4" "" "} , of character 63 to 64 character text 236 of the identity document 'Untitled 1' history application "Adobe InDesign CS4", from 65 to 76 character character text 236 of the identity document history "Untitled-1" application "Adobe InDesign CS4", from 77 to 77 character character text 236 of the identity document history "Untitled-1" application "Adobe InDesign CS4", from 78 to 98 character character text history 236 of the document id "Untitled-1" application «Adobe InDesign CS4»»» " , from 99 to 129 character character text 236 of the identity document 'Untitled 1' history application "Adobe InDesign CS4", text of 130 to 153 character character 236 of the identity document history "Untitled-1" application "Adobe InDesign CS4", text of character 179 to character 228 236 of the identity document history "Untitled-1" application "Adobe InDesign CS4", text of character 229 to 245 to 236 of the document id story character "Untitled-1" application "Adobe InDesign CS4" text of character 246 to character 275 236 of the document history»»» identity 'Untitled 1' application "Adobe InDesign CS4", text of 276 to 292 character character 236 of the identity document history "Untitled-1" application "Adobe InDesign CS4", text of character 293 to character 361 236 of the identity document history "Untitled-1" application "Adobe InDesign CS4"}»»