LASERJET PRO M127fw MFP: PRINT LABELS

Similar Questions

• LaserJet pro M127fw MFP: print with Windows 10

  Since I upgraded to Windows 7 to 10, I had a problem with printing to my Laserjet MFP M127fw pro.

  In the print preview the page to print looks like square rather than rectangular but the picture about this seems OK. When I print in fact the image is crushed vertically. The problem is the same print with Word, Excel and Acrobat.

  I have been informed that a new driver is required, so I deleted the old driver and downloaded a new one compatible with Windows 10 but the problem persists.

  Thanks for the help but it seems that the problem was that my screen resolution was completely wrong, so that if the image looked OK on preview before printing then it would look incorrect when printing and vice versa.

• M176n MFP: HP Color LaserJet Pro M176n MFP - print in reverse order

  All my print jobs print in reverse order. So if I have a great doc to print, the last page is on top. I don't find in the settings of the printer where can I change the order of the prints.

  Help, please

  Hi introvert,

  Thanks for responding. But I think I lost you somewhere.

  I downloaded the driver to the place where you sent me. No problem. I unzipped. Then I went into the temporary folder, but everything I've seen has this folder:

  HP Support frame

  So, I opened this file and only found this:

  HPSF_Config1.dll

  I went through the motions and copied the address of the place and done what you told me:

  -----------------------------------------------------

  • In the devices folder and printers, click with the right button on your LaserJet Pro MFP M176n and left click on printer properties
  • Left click on the Advanced tab
  • Left-click on new driver
  • When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  • Click the "disk" button at the bottom right
  • When the "Browse" window opens, simply right click in the path of the file bar and select "Paste" to paste the path of the file that we copied earlier. Click OK.
  • -------------------------------------------------

  When I pressed "OK", it says "file contains no software driver for your currency. Select a folder that contains the driver software, and then try again.

  He never did a 7z file in the temp. folder...

  So what I am doing wrong? Again, help please! Thank you!!!

• LaserJet Pro 200 MFP: Print of wire connected & Wifi printing

  Our Laserjet pro is connected to our network.  We can print with it from two desk top PCs. (1 running on XP the other Windows 7)

  I also have a laptop (Windows 8.1) I can print wireless to our other printers a 5514 photosmart HP and 110 HP.  I would also like to be able to print wirelessly with the Laserjet printers, but I can't unless I unplug the wire?

  Is there a setting I need to change to be able to print wireless while maintaining the connection of the wire or is - not possible?

  Thank you

  Catko

  USB, Ethernet or USB and wireless

• LaserJet Pro M127fw MFP: LaserJet M127fw MFP printer - scan Pro

  I created the printer and the scan setting. I can scam out of the glass flat, however, the printer won't let me not scan from the charger. When I select this option, I get a notice saying pop - up: "communication scanner cannot be established. If make sure that your product is powered, check the connection and make sure that your network is working properly. If these conditions are correct, restart the product and try to scan the image. If you're using a connection cable, make sure that both ends of the cable are sure... »

  I checked the two ends of the cable, and they are firmly fixed in places respectful theire, this review keeps popping up.

  What should I do and how can I solve this problem?

  Thank you!

  Hello

  To eliminate any hardware failure, you can copy from the charger of document without any problem?

  If the ADF is working as intended by the hardware, the issue most likely related to the communication between your PC and the device.

  If the response of material as planned, please try following this tool by selecting the difficulty of analysis:

  http://ftp.HP.com/pub/Printers/hppsdr/HPPSdr.exe

  If the problem persists, I suggest ensuring that the USB is connected directly to a port on the back of your PC and not via a USB hub or extension, so make sure that the cable is not longer than 2 meters in length.

  I also suggest to try a different port on your PC and check differences.

  If it persists, can you see any difference in trying another USB cable?

• LaserJet Pro M127fw MFP: Scanner bulb flashes in ready mode

  Good afternoon just bought my new printer LASERJET MFP M127fw Pro to replace my 20 years old Laserjet 6 p printer. Everything works great, but I noticed the bulb of the scanner blinks / flashes when the top of the scanner is down, when you lift the top of the scanner and the bulb doesn't blink. as well as the printer goes into mode 'sleep' it also stops flashing. Question is this a normal scanner function (bulb flashes ready mode). Check the forums and seems to be a question/problem on another HP printers but I could not find a definitive answer from the HP Support.

  Printer is plugged directly into the wall without surge, such as recommended by HP

  Thanks - looking forward to your response and management

  Hi @J-DW.

  Thanks for getting back to me.

  I've exhausted my resources on this issue. It can help to contact a Technical Support Agent.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on options contact HP - click Get phone number

  File number and phone number are displayed.

  I hope that you are able to reach a resolution.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• laser jet pro M127fw MFP: printer will not print from the computer

  printer works fine until I printed out a spec sheet. 35 a customer through an attachment page.

  now, the does not print from the computer. Everything else works fine. (copy, scan, fax)

  Internet works.  Reset the factory setting on the printer. Everything seems fine on the computer, but when I hit print

  nothing happens.

  Hi @kartman,

  Welcome to the HP forums!

  I read your post on how you can not print with your printer HP Laserjet MFP M127fw, on Windows Vista pro. I'm happy to help you with this printing problem!

  How is the printer connected? Ethernet or USB?

  In the meantime, please try our HP print and Scan Doctorand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope to hear from you soon and thank you for posting!

• LaserJet Pro M127fw MFP: LaserJet MFP M127fw Pro does not

  The MFP M127fw lives on my network.  It is used by several machines - Win7, Ubuntu Linux, Win10, etc.  It works fine for a while - as a few hours, but then enters a State where it will not accept any job.  A power reset always bring it back.

  This seems to happen little matter if I connect via WiFi or Ethernet.  The printer will just "deaf" to jobs.  The interface of the web server is not affected.

  I get tired of the power, deactivation / activation of routine.  What should do?

  TIA

  Martin

  The solution to this problem was to remove the router, Asus RT-N66U and return to the DPC3941T of Comcast/Xfinity/Cisco. Somehow the combination of Asus and Cisco (in transition mode) was not managing printers LaserJet network correctly.  More info on my blog.

  Thanks for your help!

  Martin

• LaserJet Pro M477fdn MFP: Print LaserJet MFP M477fdn Pro sudden very bad quality

  My LaserJet print quality has declined. Very, very light on all cartridges. HP utility > report shows supplies all the cartridges to between 30 and 50% of about 800 pages (black), 200 (yellow) remaining. But, HP utility > supplies management says "cartridge to very low behavior. Was an update last week I think. Maybe when the problem started. Not a gradual reduction in quality. One day everything was fine, the next day, suddenly very poor, light quality.

  Hi, Will,

  Let me advise you to do what follows, I work in reality for HP, normally this problems can appear after an update of the firmware more precisely on the 477 models, try the following steps:

  1. go into the Setup menu

  2. go to system set up

  3. go in print quality

  4. Select color grading and then press on calibrate now

  5. After all the sounds stop and the printer goes back to ready status without any attempt of messages to print something to see if it improves

  6. If the problem persists or improved but not yet developed acceptable, try 2 color calibration steps more and print something again

  7 if the problem persists I would recommend you to reach our customers telephone support for Laserjet devices.

  I hope that helps you, really confident im, what should be, Kudos to pkazmercyk for letting me know that you need help.

  Kind regards

  EstebanHP

• LaserJet Pro M127fw MFP: Scanned to pdf but document converted to bmp

  My scanner gives me the ability to scan in pdf; However, when I save the document, it displays the pdf icon, but Acrobot Reader cannot open it because it is saved as a bmp.  I have reinstalled the printer, paid $89.99 (annual) for the Pack of PDF Adobe - tried all the fixes under Solutions HP, etc, nothing has changed.  All settings appear to be correct.  I have a second all-in-one HP Office Jet Pro 8600 and it does the same thing: that's why I suspected a problem with Adobe, but this installation (supposedly) out ok too.

  Thanks for your reply.  I uninstalled and reinstalled Adobe Acrobat - thinking that could be the problem.  Let's see if a fix is available.

• LaserJet Pro M127fw MFP: LaserJet Pro M127fw MFP - Firmware install without USB

  My USB connection is broken at the plate, but it doesn't matter since I use the printer wirelessly.

  Now I have discovered that there is a frimware update, but the statement says I have to connect to the printer by USB...

  Is it possible to update the firmware via the LAN port or wireless connection?

  Wireless firmware update is NOT recommended. If you upgrade, you lose your wireless connection, that's all she wrote for the printer. Use a wired USB or LAN.

• Laser Jet Pro M127fw MFP: Print/scanning multiple pages

  When you use the automatic document feeder to print or scan several pages pages must be facing upwards or downwards? Thank you. I have a laser jet all-in-one M127

  Hi @Sinclair1,

  Welcome to the Forums of HP Support!

  I understand that you're wondering when using the ADF to copy or scan, if pages must be upwards or downwards. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Pages should be facing up when you use the ADF (ADF).

  Load the original in the TRAY of the tray

  Follow these steps to load an original in the TRAY from the tray.

• HP LaserJet Pro M127fw MFP: HP LaserJet MFP M127fw Pro will not copy or scan

  Our printer is used in a small office of 15 person. Scanning and copying capabilities have suddenly stopped working. We tried the following:

  1. Shooting / disconnecting device/restart
  2. Uninstall & reinstall drivers
  3. HP Print and Scan Doctor

  The HP print and Scan doctor provides these results after using the function of the difficulty of analysis:

  • Windows (WIA) Scan error: Scan process was cancelled by the user.
  • HP Twain Scan error: the scanning process was cancelled by the user.
  • HP Scan: success

  Note: I have not personally cancel the process leading to errors in scanning.

  When scanning:

  The scan dialog shows a progress bar and pages preview 0/0.

  When copying:

  Displays "Calibration" with a loading screen before returning to the home menu. Usually, there is a progress bar of the item being analyzed. The scanner itself does not react/move when you press copy.

  Thank you, Gemini02. We called HP and determined that the bulb was blown. We will get a replacement under warranty. I wonder if there are printers that can notify you when something like that happened, as when it is necessary to replace toner.

• HP LaserJet Pro M225dw MFP: Print problems duplex on HP LaserJet MFP M225dw Pro

  Hello, I have a problem with duplex printing. He started only today and no hardware or software has been changed, but now it prints the second side of any printed document asymmetrical. The chisel is always to the same degree. Heres an examlpe of the duplex-printed and scanned document. http://imgur.com/a/uGz23 Hope that you can help me and will excuse me for my English, since this is not my mother tongue.

  Nevermind, the problem was in the cover on the rear side of the printer, paper jams. It has not been closed tight enough, and that caused effect mentioned.

• LaserJet Pro M127fn MFP: Stuck on "Print Fax Front Page.

  This MFP is stuck with the message, 'Printing Fax Page One' I've tried the reset instructions are on the forums, but cannot get rid of this message. Is there a reset 'hard' or 'factory' I can do? Thank you

  Hi again,

  I would say for updating the firmware of the printer.

  Here is the link just choose your operating system and select the firmware download.

  HP LaserJet Pro M127 MFP series Firmware update

  Make sure that you scroll to the Firmware section.

  See if that helps