LaserJet Pro M277dw: LaserJet Pro M277dw jams power business card stock

Similar Questions

• the Laserjet Pro 200 MFP can print on 110 lb card stock?

  The all-in-one Color Laserjet Pro 200 can print on card stock 110lb?

  Hello

  The following specifications matrix info shows:

  http://WWW8.HP.com/au/en/products/printers/product-detail.html?OID=5097655#! tab = specifications

  Weight, supported

  60 to 163 g/m² (up to 220 g/m² with HP laser glossy photo papers)

  Recommended media weight

  60 to 90 g/m²

  With the help of the following conversion

  http://okpaper.com/calculators/lbs-to-GSM

  110 lb = 162.8 g/m² or 163 g/m²

  This can work, a bit tie, no room for error.

  Kind regards.

• HP Officejet Pro 8500 jams every time I send something to print.

  My HP Officejet Pro 8500 jams every time I send something to print.  Troubleshooting does not detect it.

  Contact HP for assistance they can offer to check the paper path or solve the problem.  It is not a Windows problem and there is not much we can do to help with this kind of problem.

• OfficeJet pro 8600 more power turn on witness rest "standby mode". is that correct?

  OfficeJet pro 8600 more power turn on witness rest "standby mode". is that correct?

  The power led will Flash slowly power on and off when the Officejet Pro 8600 Plus is in a sleep state.

• LaserJer Pro 200 M351nw: residues of toner to print business cards

  When I print on bond paper, I get a decent, crisp image. But when I print on card stock thre is a powdery residue on the paper. I can drag it with a handkerchief and get a significant amount of powder on the tissue.

  I remember reference to paper stock that is sutiable for color lasers, but I can't find it all in stock business cards anywhere I looked. It is apparently a special paper.

  I went through the type of paper in the printer properties. The only problem is when I print business cards. Is currently trying Avery 5876 and 8876 and Office Depot 3700-R. The 5867 and 3700-R are labeled for use in color lasers. The 8876 is inkjet. Same negative results with all.

  All proposals/solutions would be greatly appreciated.

  Hi @1071 ,

  I see by your post only when printing on cards, you get powdery residue on the paper.
  I want to help you solve this problem.

  You have the Laserjet LaserJet Pro 200 M251nw?  How can I find my model number or product number?

  Usually, when there are residues, burrs, tasks of toner left on the pages is caused by the paper used or the type of paper selected in the printer driver. You already tried different types of paper and had the same results.

  The Avery 5876 you tried are Laser printers.

  It is recommended to use bright white paper or paper that is designed for use in Laser printers.
  Don't use paper that is designed only for use with ink jet printers.
  Progress of paper is porous and for printers inkjet that absorbs ink in the paper.
  Paper Premium isn't for Laserjet printers. Chemicals and the ink soaks into the paper and takes more time to dry.
  Use paper that is not too rough. Generally using smooth paper translates into a better print quality.

  I have provided the specifications of paper for this model.

  Specifications for HP LaserJet Pro 200 M251n and M251nw color printer.

  Up to 200 g/m2 (110 lb. index) cards

  I have a document with a few steps to try to see if this will solve the problem.

  Troubleshooting print quality problems.

  What is the weight of the cardboard?

  What parameter for the type of paper do you use?

  If you need help, let me know.

  Have a great day!
  Thank you.

• OfficeJet pro 8600 more will not print card stock

  Ok. This is what worked for me. I bought a HP 8600 PRO Wireless today, Sam's Club set it up to print plain paper. Everything was fine. Then I got stock index impression of disorder, 65 lb, 175 g/m2. I kept getting an error "on paper." I changed the mediaprinting preferences: card stock and less paper size: letter of card index. The printer looks bad pick up the first two pages, but then picked up the other four pages and printed. A total of six pages printed on 65 lb, 8.5 "x 11" card stock. I hope this works for you all.

  Hello

  I am happy that the problem has been resolved.

  I would be grateful if you can click on the button of Kudo to show that the problem has been resolved.

• OfficeJet Pro 8610: business card printing Officejet Pro 8610

  Recently purchased the officejet Pro 8610 and I was wondering what is the best type of paper or stock for printing business cards

  (Matt and glossy paper types)?

  @himrajbir

  I used Avery "Clean Edge business cards" for a number of years.

  Ink jet business cards Avery #8871

  Regardless of the make or model, buy the right cards for your type of printer:

  Ink Jet

  Help, Suggestions and examples:

  Print Labels_Business-Cards_Cards

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• HP LaserJet MFP M177fw Pro: "a used power has been installed.

  When printing a 'status of supplies' black toner section displayed, "a used supply has been installed. He suggested that a not genuine cartridge has been installed. The original supplied with the printer is still installed. Not long after that the printer was new, the message of toner, said black was very low, that after only a small amount of printing.

  Any suggestions what to do?

  Hello @nigkemp

  New printers allows you to get the introductory toners that wont last long

  I guess Im a bit confused and I'm not for sure if you have 2 different toners or a single

  If it's only one supplied with the printer then replace for any new HP one and see what said with the new toner supplies

  If you do not have 2 toners (provided with the printer and another a new) then print another one supplies status page allows to call the new. Each supplies status page will give you the day to install on the toner that you want to ensure that it corresponds to the day you install the toner for the first time

  It is a way to tell if you got an original offer or society who got you might refill the toners

  Each toner has a top chip that will send the information to the unit and is how the supplies status page can get the information of

• LaserJet P2015 shows jam, but no paper is jammed

  LaserJet P2015dn stuck, but what jam has been cleared and restart the printer times the jam and the low Toner lights come on initially.  But while they go out and the green "OK" led lights. When I then try again to print, the printer then blocks after moves in the paper about 6 ". However, when you start printing, the printer makes a noise of rotation of unusual and "cans" type for 1 to 3 seconds. Then theJam lights.

  This process is repeated: I remove the stuffing and power is recurring.

  Any thoughts?

  Thanks for your help, but I gave up and bought a new HP LaserJet Pro 401dw and am just happy with it. Easy to use, faster, more intelligent 2-sided - what is not to like!

  Peter

• LaserJet 1300 paper jam

  LaserJet 3100 C3946A USBF021323 Mfg October 13, 1999

  Use of the history/primary

  A fed not location of several page for years. Only OK food for my purposes. Is not used for fax or printing from the computer. Use main scan and copy.

  Malfunction

  To replace the empty toner cartridge. First scan and copy effort leads to a paper jam in the copy with part of page rest phase in the feeder (don't remember if used not simple or multi bin for food). Page fired back with normal resistance (no tear or missing corners). First 1/3 of page was released folded in the second 1/3. Toner deposited as expected the first 1/3 and 1 inch in 1/3 second. Toner condition dry dust, unheated. Deposited toner clear and distinct than original scan. Next effort of scanning and copying. Sheet inserted in the tray sheet to the statement "Bin is empty please add paper." This resulted in "printer paper Jam check paper" Path message when paper is inserted. Can't see any piece of paper inside. Restart by pressing the "Stop/Clear".  Also turned off by unplugging the power cord for several minutes reconnect. 'Jam' same message when paper is inserted. Reinserted previous (almost empty) cartridge with results of same message "insert a paper and jam." Also tried the two reboot methods thanks to this previous cartridge.

  I would appreciate any advice that may fix this problem.

  Larry Strayhorn

  lstrayho@email. UNC.edu

  Thank you for your help.

  I guess I have nothing to lose by using the maintenance manual for the test of unity of fusion/heater.

  Larry

• HP Officejet Pro 8500 A910: Paper HP Officejet Pro 8500 jams when printing duplex

  Get a jam when trying to duplex.  I did "turned off, pull the power cord, wait 15 seconds and reconnect"., the printer will print a recto verso and then jam again. Actually, this time he printed two duplex sheetys then stuck.

  It works well until this problem.  Can't seem to fix it.

  Paper size was not a problem.  However, after this printer started leaving the ink on printed documents more jam problem, I just dumped the printer and bought a new HP Office Jet Pro 8625. so this postoing can be liquidated.  If the new printer start blobbing or blocking, I'll look for another provider.  Until that point, I was satisfied with the HP printers.  Thanks for your reply.

• Won't boot satellite R850 Pro - fan snoring; power light cycles; NumLock on

  My R850 Pro Satellite won't start. When I press the power button the power light on the laptop (under the mouse buttons) travels flashing green, green, orange, orange and the snoring of fan. also the Verr Num led on the keypad is turned on and won't go off in such a hurry. The screen is blank and plug a monitor displays a white screen.

  Remove the battery has no effect, the same results as with.

  The hard drive is readable went out and attached to the other pc as external drive using a shopping cart.

  Any ideas on what to try, hope someone can help you.

  Thank you, Carol

  You see a Toshiba splash screen at the beginning?
  You can access the BIOS?

  If this is not possible, a serious hardware problem appeared...
  It could just be a memory, but in the worst cases, your motherboard is the problem

• Compaq SFF 6300 Pro: upgrade my power supply

  Hey HP gurus, receive recommendations for a more powerful PS for my box? I am wanting to update my video card for some games, and I know that the processor will handle it, but I'm running in issues of power with all the cards in the correct performance.

  You can see that it's a totally weird owner PSU (point 2):

  

  I think it's old thread answers your question fully:

  http://h30499.www3.HP.com/T5/business-PCs-Compaq-Elite-Pro/video-card-for-HP-Compaq-Pro-6300-small-form-factor-PC/TD-p/6183611#.VK2G0ivF_OM

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite Pro A300 PSAJ5C - power cable is broken

  Power of PSAJ5C 00J00W of my Satellite Pro A300 cable is broken. Which cable buy to replace?

  Do I need to buy a special model or simply a Toshiba cable?

  Thanks for your help!

  Hello

  Do you mean the adapter?

  I advise to use original Toshiba adapter because evil or not compatible adapter can damage the motherboard or would have an impact on the functionality of the laptop.

  Check the part number of your old sector and google for this adapter usually some online dealers should provide such part otherwise you can get in touch with a Toshiba ASP in your country to get compatible part.

  The specifications are: DC 19V 6.32 A (part PA3290E-3AC3 number)

• Satellite Pro A120 - no power supply the AC adapter

  Hello

  I recently had some problems with powering the my Satellite PRO A120. Initially I was not getting any power to the laptop of my adapter. I bought a new card on ebay that seems to have solved the problem as my laptop turned on once more, even if I could use it only for a few minutes on the stand alone mode as it would drain completely after a few minutes. After a few weeks, the adapter has stopped working. This led me to believe that my battery might be the problem that caused the adapter switch defective.

  I then bought a battery of reco and tried to see how long he would stay on without the adapter - even once the laptop only lasted a few minutes before I die

  I can only use my laptop with a power adapter borrowed right now. The battery is the cause or is there an underlying problem with memory or the motherboard?

  It will be expensive to fix or should I try to buy a battery and the original power cord and see if it works

  Your opinions and comments would be greatly appreciated.

  > After a few weeks, the adapter has stopped working. This led me to believe that my battery might be the problem that caused the adapter switch defective.

  It is a nonsense. The battery does not affect the power adapter!
  The battery loses own performance during use of the laptop and sooner or later, the battery will discharge.
  This is nothing unusual happens to all batteries

  In your case, it could be a defective battery and AC adapter malfunction
  It is very rare that the two parties would begin to malfunction at the same time, but it possible s

  However, in my view the laptop must be tested using the new battery and AC adapter.

  Welcome them