Last update of Vista stuck in step 3/restart loop

Similar Questions

• My vista computer keep trying to restart loop error - driver_irql_not_less_or_equal "stop 0x000000D1"

  Original title: my vista computer keep trying to restart loop.

  He came once with the driver_irql_not_less_or_equal. blue screen exports also "stop 0x000000D1 0x00000002, 0x00000000, 0x87dfb395.» I tried to use the vista repair, but it does not start even. I can't go anywhere because I can't even use a limited boot option, is not to happen.

  Hi AllanHolland

  (1) remember to make changes?

  (2) what happens when you try to run the Startup Repair tool?

  
  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) drives, etc...)  Except the keyboard and mouse and then start.

  Step 2: run the Startup Repair tool after disconnecting all external devices, see them steps mentioned in the link below

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  If the problem persists,

  
  Step 3: follow the steps mentioned in the link below to access the system recovery tools and then run the system restore
  How to access the System Recovery Options menu?

  For more information, please visit the link below

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

• Update Windows Vista stuck at 0%

  Whenever I update manually or system automatically triggers the update of Windows, it remains stuck at 0% even after 24 hours. It shows that 40 updates are available and even update yourself (as in 39-40 updates...) Addition of new updates) but when I choose to download a few stays at 0% download 0 KB.

  It was a month back work any fine or I tried to uninstall everything I've updated / installed during the month. Also when I try manually update any application Windows (by microsoft related to the Windows operating system) he moved as well. For example if I choose to manually install IE8 stuck to "Installation of the basic elements. 

  
  

  How can I get rid of this problem? Esomething else is working well, browsing, downloading, speed.

  
  

  I use Windows VISTA Business on a Sony Vaio CS-36

  Asif Siddiqi

  Dear Samhrutha G,.

  Thank you for your response. However, I understood the question. I had to uninstall Microsoft Security Essential to put everything to normal.
  Now everything works fine.
  Thank you for your prompt update.
  Kind regards
  Asif

  Asif Siddiqi

• After my last update to Vista, my usb and slot for cf card readers were not mapped. I need to access. Difficulty?

  I updated Vista Friday, 11/09/2011 with KB2533523, KB2468871 and KB2310138.  After the update, I lost my backup drive Seagate mapping and my maxtor drive and card slots on the front of the desktop computer.  Tried running the fixit Center and it crashed.  I can still get to my CF card of the Canon camera via USB connection software - is not acceptable.

  Hello

  I would say you can place the computer in a clean boot state and then try to install the updates that to and check if it helps.

  Note: after the installation of each update to restart the computer, so that we can confirm which updates is causing the problem.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135 Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual

  Hope the information is useful.

• April security updates Windows Vista caused laptop does not restart!

  Update security for Windows Vista (KB3045685)
  Update security for Windows Vista (KB3045999)
  Update security for Windows Vista (KB3046306)
  Update security for Windows Vista (KB3046482)

  Message box, something went from an unusual way to term in the registry.

  He had no numbers...

  1 Windows auto updater installed 10 updated important. On reboot,.

  my Toshiba laptop wouldn't start to ANY connection and is gone to the message box.

  I started in safe mode and did a system restored.

  2 tried to reinstall but only with the updates listed above, 4 KB not the 10.

  SAME message. Again once restore safe mode.

  Anyone know who the 4 updates do not use?

  I also stopped the automatic update.

  Any solution? I would like to take back with updates.

  I have not tried the 4 update above 1 both because the recovery mode is

  a lot of time and frustrating. Microsoft should have some answers...

  Hello

  Thanks for the post.

  Disconnect any attached external devices.

  If you use a third-party antivirus disable and then install updates and check.

  Temporarily turn off the firewall and antivirus software and try to install the updates.
  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-Vista

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  If this does not help, then I suggest you to put the computer in a clean boot state and then install. Start your computer in a clean boot state, you can reduce conflicts between software and help identify the root cause of the problem. You can read this article for more information:

  http://support.Microsoft.com/kb/929135

  Note: after the resolution of the problem, reset the computer to start as usual. Refer to the step How to configure the computer to start as usual after a boot minimum troubleshooting under more information.

  Try this and let us know the results.

• Automatic update to Vista computer sent in an endless loop.

  I tried in safe mode no luck.  It starts with a screen of configuration for the component 3-0% and then automatically restarts at the same screen over and over again.  He never went from 0%.  I have ASUS Express Gate me throwing a "Splashtop browser", that's how I'm able to join this forum.  I can't start my OS or access files HD here somehow.

  Hi Raven,
   
  Try the next step and check the result.
  Step 1: disable automatic reboot and start the computer
  a. boot the computer and press the F8 key continuously to get advanced boot menu options.
  b. on the menu advanced startup options select "Disable automatic reboot in case of system error" and press ENTER.
  c. check if the system starts in normal mode or safe mode
   
  For the other troubleshooting steps, see the updates configuration message and the system reboots
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LAST UPDATE FOR EL CAPITAN CANNOT SETTLE DOWN, THE COMPUTER RESTARTS.

  problem 1: I can NOT INSTALL THE LAST UPDATE OF "EL CAPITAN." THE COMPUTER RESTARTS NOT SPONTANEOUSLY OR FORCED.

  BESIDES, MY "FINDER" DOES NOT WORK, NOT TO NOT DISPLAY.

  problem 2: I can NOT INSTALL THE ICLOUD PREMIUM from AMAZON.COM FOR the PHOTOS IN MY MACBOOK PRO.

  problem 3: I want to recover the space in my MacBook Pro by removing ACCESS 'PARALLEL' IF I PUT THE WINDOWS XP AND WINDOWS 7.

  PROBLEM 4: I WANT TO 'CLEAN UP' MY MACBOOK PRO TO RECOVER THE SPACE. I USED TO HAVE 'MACKEEPER' BUT I AM TIRED OF PAYING FOR UPGRADES.

  PROBLEM 5: WHAT IS THE WAY OF EASIIEST TO SEN IMAGES TO THE ICLOUD. I NOTICED THAT TAKES TOO MUCH TIME AND I CAN NOT CHOOSE "ALL PHOTOS" TO BE SENT TO THE ICLOUD SO I CAN DELETE THEM THE PHONE AND THE MACBOOK PRO. "

  THANKS FOR ANY HELP.

  PEDRO

  AKA Dr.Hdz

  Answer 1: Try to restart the computer by pressing command + R. This should start the mac in recovery mode and will allow you to reinstall OS X (don't worry it'll only reinstall the operating system, your files will not be deleted)

  Answer 2: Can elaborate you more on what is the iCloud premium Amazon.com for photos? I've never heard of this, what error do you get?

  Answer 3: Open Bootcamp Wizard and choose the option "Remove Windows 7/XP"

  Answer 4: Mackeeper is ransomware. AKA. a scam, don't pay for it. You can use tools such as OmniDiskSweeper, which is free and shows you what are the elements take place on your mac so that you can delete what you don't want.

  Answer 5: If you have iCloud library activated under iCloud, then your images will be automatically uploaded to iCloud and equipment associated with your Apple ID.

  I would like to know if this helped you / resolved questions. Thank you!

• Last updated 06/14/12 OS Vista Home Premium stuck in the loop

  Last updated 14/06/12 computer keeps disconnecting and return to the "Configuring updates step 3 of 3-0% complete.
  OS is Vista Home Premium.
  Unable to make progress, step 3 do not setup, the computer restarts and returns to above message. This process repeats itself, cannot access the restart computer tried SafeMode nothing helps. Everything works OK before download of the update. Anyone has a solution please?

  Hello

   
  You cannot cancel changes to the system of Windows Recovery Mode restore...
   
  I suggest you to go through the following method and the Coachman.
  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates.
  http://support.Microsoft.com/kb/949358
   

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

• Stuck at step 2 updated configuration

  I have vista home prem 64 bit, it was automatic updates and did last night, I don't know what he was trying to load.  He is stuck at step 2 of 3 Configuration of updates, it says 100% full and do not turn off your computer.  It has been like this since at least 6-7 hours last night.

  What to do?

  Hi Randy,

  It's been a while, we can think that the update is stuck and will not continue any further.  You can press Ctrl, Alt & Del and open Task Manager.  You should see the update on the Application tab, and you can select it and press end task.

  Click on the start ORB > Control Panel > programs and features, on the left, select view installed updates and see if the update that was being Setup finished installing.  If it does not have and does not appear on the list, you can restart your computer and try to install the update mode without failure.

  To do this, restart your pc and even if your pc is booting press the key F8 on your keyboard to enter the Advanced Boot Options menu.  On the Advanced Boot Options menu, select Safe Mode and press ENTER.

  Your computer will boot mode safe by using only the basic drivers and services, hopefully allowing Windows Update to complete the installation of the update, you are having problems with.

  Please let us know if you are making progress in this way.
  Kavita M
  Microsoft Answers Support Engineer
  Visit the Microsoft Answers Feedback Forum site
  and let us know what you think.

• Update Windows, stuck at step 3 of 3, does not start

  Hello

  Reading the forums, so it seems I'm not the only one who had this problem, but none of the data seems to work for me.

  My computer is running slow this morning (as sometimes when he treats a large update), so I restarted.  But now, whenever the system tries to start, it gets insofar as the message 'configuration updated step 3 of 3, 0% ' before it restarts in total.

  I am running Windows Vista Home Premium - I think that it is 32-bit, but I'm not positive.  I have a laptop HP Pavilion DV6345us.

  I tried all suggested fixes, I found.  I tried to launch the Mode without failure (all versions of it), but every time it's the same thing.  I've never had to simplified office, I think I'm supposed to see.  I tried the system restore, but none of the dozen or so restoration work points.  After each attempt to restore the system, I get this error message: data error (Cyclic Redundancy Check) (0 x 80070017).

  My last update was added on 06/05/10 at 09:16:38.  My last update before that was 05/03/10 at 14:31:18.  My time zone is set to GMT - 8:00 (or Pacific time).  Between the Windows updates, I downloaded an update for Java (Java 6 update 20) 04/05/10.

  I have also run the memory diagnostic tool, but that has not changed anything.

  I do not have any third-party malware or anti-virus software.

  This is all the relevant information, I think I can give.  Any comments would be greatly appreciated, because I use my computer for work and need again as soon as POSSIBLE.

  Thank you!

  I do not have any third-party malware or anti-virus software.

  Not good.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  How TO do a clean install of Vista: See the section "If you want to reinstall Windows Vista by running a new installation... "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If you need assistance, start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Configuration updates stuck on step 3 0f 3-34% full.

  Try to make a fairly significant update for Vista - I think I had about 24 updates total.  For the last two hours, although it is stuck at 34%.  I'm not sure what to do, either wait it out or try to reboot/restore to an earlier point.  I also searched and did not find any similar problem (this is not the same as restarting without end about 0%).  I'm starting to think that it will never go beyond this point.  Any input or help would be greatly appreciated.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Updates to Windows vistsa stuck in step 3

  My laptop has been updated the vista software while my laptop was in mode 'sleep', I woke up thinking, I had not turned off and just opened and closed, it does not on the screen... the screen must have said, once again updated step 3 of 3, 0% complete, please do not turn off the computer.
  Now, he seems to be stuck in a cycle of say the updates and then stops and then restarting without me pressing anything. I tried now pressed the power button and from the laptop in safe mode, but the same thing happens again. Sometimes the desktop appears and I tried shuitting down continues properly, but the same cycle!
  It's very frustrating and I need my laptop for college work!
  Please help... my laptop is a toshiba EQUIM A200 - 1V0 PSAF5E model number - 002005 5 K bought in December 2007.

  Hello

  You can use the solutions here:

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx
  Rob - bicycle - Mark Twain said it is good.

• MY phone is 6 and my phone using the last update (9.3.2) when I type the time massges is stuck... (VIber, imassge, wts place) How can I solve this problem?

  MY phone is 6 and my phone using the last update (9.3.2) when I type the time massges is stuck... (VIber, imassge, wts place) How can I solve this problem?

  Now its all ways stuck not only type

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• Update Vista stuck on 4 installation 7 updates for 5 hours

  During a stop, I received a message that Vista (Home Premimum) installed 7 updates.  He stuck on update #4 with little activity HD so after 5 hours, I was stopping power.  How should I proceed to the power upward?

  Hello

  Install 2 if it is one, it blocks. If this is his 'likely' to be the 3rd. However often
  their installation in the segments works when they choke when all tried at some point.

  Another trick is to go to the Download Center Windows manually download and install updates.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  ---------------------------------------

  You can uninstall all to the need:

  Control Panel - Windows Updates - lower left Installed Updates - uninstall.

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.