Stuck at step 2 updated configuration

Similar Questions

• My computer is stuck in the loop "Update Configuration". Boots only in safe mode.

  My computer is stuck in the loop "Update Configuration". Boots only in safe mode. I tried to do a system restore, but an error message appears that says:

  To perform an offline system restore, you must specify which Windows installation you want to restore. For example, if the installation is in "C:\Windows:" should be restored, enter the following command: rstrui.exe/OFFLINE:C\Windows

  I typed in the "run" command, and it didn't work either. VIsta came installed on the computer, so I don't have a disc to insert and reboot with. Help, please!

  Thanks, Ben

  OK, I found how to fix this problem.

  Go to this site download and buy the repair for Vista disc. Burn it to a disc.
  This link will guide you in burning instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn
  Start your computer with the disk and follow the instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

• Windows Live Update stuck on the third update of configuration

  original title: Windows Live Update

  My mother-in-laws computer has Vista Home Premium and it asked me to install a windows live update, she accepted and installed the update.  He then ask him to reboot to make the final again.  After the restart, he was slain on the update configuration 3rd two days with 0% complete.  He keeps just restarting, anyone know how to get rid of the update or do skip the update and go to the home screen.

  Thnks,

  Brad

  Hello

  I suggest you to follow the link below and check if it helps.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

• Windows vista will not start and is suspended on microsoft today updated. Stops on step 3 update

  Microsoft updated automatically to my vista computer today and now it does not work! It gets stuck on reboot and says "configuration updates step 3 do not turn off your computer" then hangs at 0% for a minute and recycles stuck in the same place again. Help!

  Hello

  Method:

  Follow the link below, perform the steps and check if it helps.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Let us know if it helps.

• iPhone 4S stuck in mode of update in the update iOS 9.3.4

  Hi all

  My iPhone 4S is stuck in mode of update by updating to iOS 9.3.3 9.3.4 iOS. Tried to hard reset the phone with alarm and keys "home" button, but without success. Attempts to restore the phone via the latest version of iTunes also failed with the error code update 29 each time indicating hardware problems. Do not understand how this can be hardware problem, if the phone worked fine before the update to iOS. Currently, the phone fails to start. Has anyone also faced problems similar with their devices during the upgrade to iOS 9.3.4 and is all their way out of this problem?

  Hello

  Follow the instructions here for the error code 29:

  Get help with iOS update or restore errors - Apple Support

• Air IPad also get stuck cant activated after update 9.3 not only the ipad 2

  My ipad air also get stuck cant activated after update 9.3 Thursday so far seems that apple did not the solution... I did also his already suggests.

  Remove all the account update DHU icloud and restore from itunes, even now downgrade to 9.2.1 but still nothing... Stress really full with this apple product.

  I also have the same problem after that latest iOS update.

  Help, please

• get the error message "updates configured incorrectly"

  whenever downloading windows updates I then received message

  "updates configured incorrectly" are because I turn off backup carbonite?

  The carbonite backup has nothing to do with it - it is not a problem in this problem.

  Here is an article on troubleshooting Windows Update issues: http://v4.windowsupdate.microsoft.com/troubleshoot/.

  If this does not help, try to download the updates and install them manually.  Here's where to find (using the KB number):http://catalog.update.microsoft.com/v7/site/Home.aspx.

  If that still does not help, please repost it in the Windows Update Forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads , where updates experts will be happy to help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Vista downloaded update, start-up went in the update configuration but does not update, but after a minute or so stops and it's a cycle.

  Update configuration without end with 0% then stops then after configure updated again with 0% and shuts down again and it will be just a cycle... What should I do?

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  http://support.Microsoft.com/kb/949358

• Updates configuration: phase 2 of 3-100% full. Do not turn off your computer. Don't know what to do next!

  I have a 503WM Compaq Presario with Windows Vista Home Premium, which has problems after a Windows updated today.  First of all, I have installed .NET Framework (3.5?).  Windows Update started and downloaded a few other updates, and then asked to restart my computer - on restart received the updates configuration message, but when you have to configure the updates: phase 2 of 3-100% full.  Do not turn off your computer, nothing happens--or my hard drive internal or external are doing something and Ctrl-Alt-Del does nothing.  What should I do next?

  Before that, I installed Hallmark Card Studio 2010 Deluxe and received an error message 2738.  Followed the instructions on Microsoft to add two files that had to do with the VB script.  Hallmark installation instructions downloaded then installed .NET Framework 3.5.  The update of Windows has started and installed (I think) 4 critical updates.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Windows Update does not work. Stuck at "checking latest updates... »

  I use the Windows Update site to check the updates manually. But he is stuck at "checking for updates
  for your computer... "and not going is not beyond this point. Its been done these last days. I'm on Windows XP SP3.

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Does not start: stuck at step of logo

  My sansa clip + bought in February 2014 at amazon (fr) unbootable. I have to reset after each attempt to start 10 seconds by pressing the power button. After the reset, the logo disappears, but the player is no longer able to boot. If I connect it to my computer, the player is stuck at the same stage. The battery must be complete (I have Pascal view this information, of course) because I let my sansa clip + a long time to load.

  The player is stuck at step of logo and never actually start. I can't access the file from a computer; so I can't upgrade the firmware to fix the bug...

  Does anyone have an idea how to solve this problem? Is there a warranty for 8 months older products?

  Hi PPrw, since it is still under warranty, I could check first and see if a replacement would be possible here.

• Blue screen continues after the recent Windows updates - Update configuration 3 of 3 0%

  original title: blue screen continues after the latest updates of Windows

  Last Thursday while I was at work, an automatic update downloaded on my computer.  When I got home, the blue screen has increased and said "update configuration".  3/3.  0%.  Do not turn off your computer.  Well, keep the computer restarts and the same screen appears.  Over and over again.  At least 40 times.  Finally, I turned the computer off and when I turned it on... I hit 'f-11' and performed a scan on everything and everything was ok.  Then I did a system restore point to before last week and he ran.  When the computer is started again, the same "update configuration" screen always shows!  How to do the work to turn back normally?

  Linda,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04/25 / 1112:57: 43 pm

• How to fix Windows update configured to never install drivers

  None of my USB sticks work, says no driver installed.  Troubleshooting report says "windows update configured in a way to never install drivers". How can I fix?

  Hi Phil,

  Thank you for your update on the issue.

  1. Have you tried to connect your USB stick with all the USB ports on your system?
  2. You are able to install all Windows updates.

  As you have tried to choose the option always to install the best driver from Windows Update software already, I suggest once, click the radio button for Yes, this automatically (recommended), save changes and check if the problem persists.

  Also, I suggest you try to remove and reinstall all USB controllers and check with the question.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  More information: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Please post back your results for assistance.

• My computer says updated configuration failure, recovery changes, do not turn off your computer... I left on three days and he said that

  My computer says updated configuration failure, recovery changes, do not turn off your computer... I left over three days, and he said that. Does anyone know how to get that back in Windows so I can use my computer. It is a laptop Windows 8.

  Do a Startup Repair:

  Auto repair - run in Windows 8 - Windows 8 Forums

  Let us know if it is not resolved

• Configuration updates stuck on step 3 0f 3-34% full.

  Try to make a fairly significant update for Vista - I think I had about 24 updates total.  For the last two hours, although it is stuck at 34%.  I'm not sure what to do, either wait it out or try to reboot/restore to an earlier point.  I also searched and did not find any similar problem (this is not the same as restarting without end about 0%).  I'm starting to think that it will never go beyond this point.  Any input or help would be greatly appreciated.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.