Latest patches ESXi 3.5 fail to install.

Similar Questions

• ESXi 5.0 fails to install on the Workstation VM 8

  I am trying to install ESXi on 8 workstation 5.0. When I do, I get a warning from hardware_virtualization. I have virtualization enabled in BIOs. I run ESXi 4.1 with no problems at all. I'm desperate to make this work. I need it to document the process of work.

  I don't know if it's important, but my processor is an Intel Core i7 920 Bloomfield. Is this supported? I couldn't tell by looking at the HCL.

  Here is the error:

  

  Here is the Intel CPU showing utility virtualization is enabled:

  

  Go to VM-> settings, select the "Processors" page and check the box 'Virtualiser VT-x/EPT or AMD-V/IVR.'

• How do you know what was the latest patch installed on VMware ESX Server 3i, 3.5.0 207095

  Hello guys,.

  I've been running an old server that was installed in a test system on workstation DELL - Optiplex GX620 (32 bit).

  During installation, I had to confirgure the file: /usr/lib/vmware/installer/Core/TargetFilter.py to change the following line:

  "interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_IDE' as follows:

  "interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_ISCSI' this is it worked and I used it for 3 years now. However, right now, I was hoping to be updated with the latest patches and updates and I do not know if I just ESX or ESXi, or what was my last update, and what it takes then.

  I used this command to get the following result:

  # vmware - v

  VMware ESX Server 3i 3.5.0 build-207095

  ... I think that the 3i says I have an ESXi 3.5.0 but build 207095 the buid even as ESXi 3.5.0 patch 5?

  If this is not the case, how should I do to update? What is the KB # I should download?

  I can manage using vSphere Client 5.5 and I can't SSH using PuTTY.

  Note: When I run... "# esxupdate - bundle = ESXe350-201302401-I - SG.zip updated ' of in the folder where his property in the data store, nothing happens... just a new line scrolls.

  Also...

  # esxupdate query

  <? XML version = "1.0"? >

  <>request-response

  < installed packages >

  < package ID = "ESX-207095" >

  firmware < name > < / name >

  < version > 3.5.0 < / version >

  < rel > 207095 < / rel >

  < / packages >

  < package ID = "ESX-CLIENT-204907" >

  < name > viclient < / name >

  < version > 2.5.0 < / version >

  < rel > 204907 < / rel >

  < / packages >

  < package ID = "ESX-TOOLS-207095" >

  < name > tools < / name >

  < version > 3.5.0 < / version >

  < rel > 207095 < / rel >

  < / packages >

  < / packages installed >

  < / request-response >

  # /vmfs/volumes/525300ce-5ff6ad3d-e2ed-0014222aedb7/patches/ESXe350-201302401-O-SG

  ... is there any update for this system? I therefore believe that the patch software etc was not around when I was installing this server in 2010.

  Based on KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1014508 you run ESX 3.5 Update 5.

• Auto. updates fail to install. but Firefox tells me I have the latest version.

  Updates fail to install. When the order of Firefox, said I have the latest version and am unable to download the updated version.

  Hello
  The details of your system it seems that you are running the latest version of Firefox.

  Although you can visit here and make sure that it.

• What I have to install all the updates more or is the latest patch all previous issues?

  I have a laptop that I sometimes use, but is not my main computer. I pay for the use of the internet by the GB.

  Question: When I do not turn on this laptop, I have several updates. especially security for vista that sometimes require a lot of data useage. What I have to install all the updates more or is the latest patch all previous issues?

  Original title: several updates

  Hello

  Monthly updates do not reach the GB amounts; they are a few MBs.

  You must install all the updates of priority; the options are to you.

  Performance and security updates are very important to keep your camera in a good and safe working order.

  SP1 and SP2 released centuries ago have been a highlight of security and Performance updates in time and had to be retained and priority of updates, you receive now are certainly needed.

  ____________________________________________________

  FOR INFO:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You only get the latest drivers for them to real hardware manufacturer's website, as Microsoft does normally or those have the most recent drivers available as Microsoft is based from the 3rd hardware manufacturer left to provide.

  See you soon.

• Need to install the latest patch on ESX 3.5.0

  Dear Expert VMware,

  I have an ESX 3.5.0 64607 host, I want to install the latest patch or the latest version of ESX 3.5. can you please help me with the following

  (1) what is the last path or build of ESX 3.5.0 and please help me with the link of the same thing.

  (2) Please help me with the installation procedure step by step.

  Concerning

  MrVMware.

  You will need to should not change your ESX 3.x license as you move between versions.  vCenter will not need to change as long as ESX 3.x is licensed OK.

  PS - your message has been moved to the forum ESX 3.5.

• How install/download the latest additional updates that have failed through automatic update?

  I recently downloaded 3 security updates, but have still several other updates failed. How to start these updates?

  Hello

  1 how long have you been faced with the question?

  2. you have any application installed on the computer security?

  3 did you last modified the software on the computer?

  I suggest you to check Windows update failed to install. To do

  (a) go to control panel

  (b) click on Add / Remove programs

  (c) scroll to the bottom of the list of programs, to see that Windows updates put a check mark in the box next to see the updates.

  (d) you can also see all the updates that are on your computer.

  If the update has failed once, it might have gotten installed later, but Windows will offer this update.

  You can make a note the number of KB and then download and install the updates manually.

  http://www.Microsoft.com/en-us/download/default.aspx

  Method 1:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  Hope this helps and keep us informed if you need help.

• The updates that fail to install.

  For several years now I have received a notice of updates and they have always failed to install. I gonored the problem since the computer was working ok (my use is very limited). Reading some of the information provided by you, dear friends, I decided to cry HELP.

  For several years now I have received a notice of updates and they have always failed to install. I gonored the problem since the computer was working ok (my use is very limited). Reading some of the information provided by you, dear friends, I decided to cry HELP.

  Do not jump.  Even if you know that you did 30 seconds before you are about to do again because you are being asked to do things.  In order...  Wait as this to blow up your weekend.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (if given the choice, you * will * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• MP3 player and KB 928439 fails to install - error code 80070005

  Hello

  I recently had a problem with Vista Home Premium SP2 suddenly refuse to recognize my Creative Zen MP3 player even if the player is recharged when the unit is installed.

  When I plug the Zen to a USB port it says "install the driver software for device" informed me then that "Device driver software has not been installed successfully - MTP device. This is regardless of whether I'm using a USB hub or a USB motherboard.

  In Device Manager under portable devices is an MTP device with a yellow exclamation point and tells me "this device cannot start (code 10)". I offer myself to check the solutions with Microsoft. This produces nothing - a result, nor anything else besides!

  The research of this forum and the net I found and tried a number of soilutions, but nothing helped. However, there is one thing that I did not try to Fixit. However, this requires Windows PowerShell and when I try to install this it requires KB 928439 and this patch do constantly moved with the error code 80070005.

  Any suggestions to solve the problem of origin with the MP3 player or the installation of Windows PowerShell would be greatly appreciated.

  Thank you
  Martin

  Hello
   
  scenario 1: This device cannot start code 10
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and
  Maintenance and then click Device Manager. If you are prompted for an administrator
  password or confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the device, and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.
   
  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
   
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Visit your hardware manufacturer's website for the latest drivers for the device.

  scenario 2: To solve the problem "KB 928439 fails to install with error code 80070005'
   
  Method 1
   
  Reset windows update components and then try to install the updates and see if the installation is complete. Open the link below and click on the cue, he touches.
  http://support.Microsoft.com/kb/971058
   
  If this is not enough, you try the next method.
   
  Method 2
  Try to download and install the updates manually. Visit the link and enter the KB number for updates and download the same.
  http://www.Microsoft.com/downloads/en/default.aspx
   
  All the steps suggested to try the link below.
  http://support.Microsoft.com/kb/822798
   
  Try these steps and let us know the answer.

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• 15/10/2014 patches ESXi break Citrix Netscaler VPX Appliance

  The part warning, part question...

  My ESXi hosts were v5.5.0 206190 (directly from the 5.5U2 cd - RollupISO2), I applied the following hotfixes:

  ID: ESXi550-201410101-SG Impact: Important release date: 2014-10-15 products: embeddedEsx 5.5.0 update esx-base

  ID: ESXi550-201410401-BG Impact: critical release date: 2014-10-15 products: embeddedEsx 5.5.0 update esx-base

  ID: ESXi550-201410402-BG Impact: Important release date: 2014-10-15 products: embeddedEsx 5.5.0 update drivers-misc

  ID: ESXi550-201410403-BG Impact: Important release date: 2014-10-15 products: embeddedEsx 5.5.0 update sata ahci

  ID: ESXi550-201410404-BG Impact: Important release date: 2014-10-15 products: embeddedEsx 5.5.0 update xhci-xhci

  ID: ESXi550-201410405-BG Impact: Important release date: 2014-10-15 products: embeddedEsx 5.5.0 update tools-light

  ID: ESXi550-201410406-BG Impact: Important release date: 2014-10-15 products: embeddedEsx 5.5.0 update net-vmxnet3

  subsequently they were 2143827 v5.5.0

  Once updated my Citrix Netscaler VPX devices 2 (vmware hardware 8, Citrix Netscaler OS v10.5.52.11nc (latest), FreeBSD 64 bit, E1000 Nic) has stopped responding on the network. They work very well when it is on the old version 5.5U2 but starts to drop packets intermittently and then finally deposited the network during the migration to a host that has the patches listed above. I have 2 mode high availability, this happens even if only one is enabled and the other offshore. It goes back to normal when back to host pre patched vmotioned.

  I have tried switching networks, remove and add network, upgrade to 10 hardware cards, removing all together and deploy the latest version of the citrix website, if it fall not all together, he will drop a lot of packages. You can watch the netscaler console display events NŒUD FAIL, NŒUD down and NŒUD up to several times per minute.

  DIFFICULTY (or work around)?

  Hi all

  When you work with VMWare Technical support they foud a solution that works for me almost an hour now.

  Maybe you guys can 'test' this solution too?

  Enter the shell in the NetScaler mode, then:

  (1) find location loader.conf on NetScaler VM #find /-name loader.conf

  For the VM NetScaler downloaded, there are 2 loader.conf:./flash/boot/defaults/loader.conf and. / flash/boot/loader.conf, we only need to change one.

  (2) add "hw.em.txd = 512" in loader.conf, this will change the Tx ring size to 512 (Note: do not set the size of the ring to 256, it will cause the NetScaler VM core dump)

  (3) restart the NetScaler VM

  4) migrate to a host with the latest patches

  Good luck...

  Edit: still works fine, also with userload in production environment

• Loss of HDV support after the latest patches to Adobe...

  Recently, I applied the latest patches that have been released for AE, organization and a few other applications in the master suite and after that the patches have been applied I lost the abilty to edit HDV in the body and EI.  In the body, it in fact grayed out option to turn off the product, which makes it appear like it has disabled somehow my product, but in AE the deactivate option is always there. I read to you run the trial HDV version is not supported, so I think it somehow disabled my products.  Anyone facing this problem?

  Skeeze:

  Your problem may be related to this issue, mentioned in the blog of Todd Kopriva, Region of interest.

  If you have downloaded the trial after effects 9.0, and then updated to After Effects 9.0.1 and then activated the application with a serial number after purchasing a license (all in exactly in that order), then the After Effects 9.0.2 update will fail to update your content to third parties, such as the Cycore (CC) effect plug-ins. It seems that uninstalling the third-party content and then restarting the application will cause third party content updated to install correctly.

  Please note that the support for HDV, AVCHD and other formarts based on MPEG relies on technology under licensed by third-party, and which are installed as part of the package of third-party content developers. So I would definitely start by trying this.

• start failing after installing Windows XP firefox 12.0: error message: "the configuration is incorrect."

  After clicking on the icon of Firefox, I get the error message "this application has failed to start because the application configuration is incorrect".

  I uninstalled Firefox and deleted all the Mozilla files in my user account in the Documents and Settings folder. I installed the latest version of Java. Then I installed Firefox 12.0.

  I had this same problem when I updated my Firefox 11 to a later version of Firefox 11. I hadn't saved the old version of Firefox 11, and I couldn't find on the web, so I went back to Firefox 3.6. I am currently in Firefox 3.6.28.

  I'd like suggestions on how I could get over this stumbling block.

  Details of the configuration of my system:

  Version Java 6 32

  Name of the operating system Microsoft Windows XP Professional

  Version 5.1.2600 Service Pack 3 Build 2600

  System Type X 86-based PC

  Processor x 86 Family 6 Model 15 Stepping 6 GenuineIntel ~ 1867 Mhz

  Total physical memory 048,00 MB 2

  1.38 GB available physical memory

  Total virtual memory 2.00 GB

  Available virtual memory 1.96 GB

  Page file space 3.84 GB

  You can try to uninstall all entries of "Microsoft Visual C++" from the windows control panel and see if the error message disappears.

  (where another program on your pc depends on execution, it will display a dialog box when you start this program and offers you to reinstall once again)

• automatic updates fail to install.says 6 updates pending installation but when I click on install after installing it says cannot install updates gives 643 and 646 error codes

  need help for the automatic update of work again.has has not worked since October 16. gives error 643 and said 646.IRV 6 updates waiting to be loaded, but when I install and it does its thing, sometimes failed to install updates and gives these errors.clicked on the start menu where it says shuts down your computer and install updates but auto update still does not work

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• 800 b 0100 updates fail to install

  I've had problems with a few updates lately,

  they are:

  KB2387149
  KB2423089
  KB2485376
  KB972270

  and

  KB974431

  When I try to download in Windows Update it says "download updates... "for a few seconds. Then he goes to "Installing uppdates...." ».
  It seems to install 3 updates, that they finish in 10 seconds approximately and then he says that all 5 have failed.

  I also tried to manually download standalone installer of each patch, but these facilities fail as well.

  Thank you
  --
  Daniel

  Hi Daniel,.
   
  Follow the steps mentioned below and check to see if they help.
   
  Step 1:
   
  If you receive error 800b0100 in Windows Update, this means that a file needed byWindows update is corrupted or missing. System update readiness tool can correct some conditions that can cause this error. To use the tool, follow these steps in the article:
   
  Windows Update error 800b0100
   
  Step 2:
   
  You can follow the steps mentioned in the article to see if this resolves the problem.
   
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
   
  Step 3:
  
  I suggest that you put your computer in a clean boot State and then install the updates that are mentioned. The issue could be related to a third party software conflict causing the issue to occur. Clean boot helps eliminate conflicts of third party software.
   
  Note: Follow step 7 to your computer as usual.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• 2 UPDATES constantly FAIL to INSTALL: a security update for Microsoft Works 9 (KB2431831) update of security for Microsoft Office System 2007 (KB2288931)

  2 UPDATES have consistently failed to install since 12/16/10: update of security for Microsoft Works 9 (KB2431831) and update of security for Microsoft Office System 2007 (KB2288931). I tried to REINSTALL... and CONTINUED on for more than a week now with no result. I don't get the error messages or codes, so I'm not sure what to do! They are considered IMPORTANT so I guess that I need these updates and I TRIED to RESTART after update with NO RESULTS as well. The 2 latest updates only "UPDATED successfully", before the long chain UPDATES failed, which began on 12/16/2010 (as previously mentioned) were: update for Internet Explorer for Windows Vista (KB2467659) and Security Update for Windows Vista (KB2305420) someone knows what do to update failed? Any help would be most appreciated. Thank you. {By the way... I use my computer for use at home or school.} Thank you.

  This has been answered above in my first post. I didn't know that I reposted on the same site. Thanks :)