Latitude 10 st2 light sensor problem

Similar Questions

• Light sensor problem

  Hello. First post here. I had problems with my sensor of ambient light in the night - in total darkness, the screen refuses to adapt to its brightness. The Adaptive brightness setting only works when there is a light source or if I reboot my phone. Which is problematic for the cold winter nights when I don't want to leave the blankets. My phone is running Android 5.0.2. Is there a fix?

  Contact the customer service and the Assistant advised me to clear the cache to get rid of all junk from previous installations of Android. Since it is in the middle of the day, after having done that, I lock myself in a closet as a small child and tested the Adaptive brightness. It seems to work so far! And my pitcher is smoother too? I'll be sure to do so before resetting the phone entirely, in the future. Thank you Jenny!

  (Wao, motorcycle customer service iz pretty gud!)

  CLEAR THE CACHE:

  1. with the phone turned off, press the FLIGHT BUTTON down for 2-3 seconds and then release the POWER button.

  2. the unit will display the different BOOT OPTIONS

  3 use the FLIGHT DOWN to SCROLL to the recovery key and the FLIGHT UP key to select

  Tip: If the device restarts, you may have been waiting for a long time to make a selection, you will have to start the process.

  4. the unit will display the Motorola logo and then the Android in distress (with exclamation point logo)

  5. press in and hold the FLIGHT upward for 10 to 15 seconds. While pressing the FLIGHT UP button press and release the POWER button

  Tip: You can try this step, holding the phone in landscape. If you're stuck on step 6, try a forced reboot by pressing the Power button and the key low-flying and start the process again.

  6. the unit will display additional menu options (text will appear in BLUE)

  7 use the FLIGHT DOWN key to scroll through the options to clear the cache partition and the POWER button to select this option

  8. the unit will then perform the wipe partition

  9. the unit will restart and begin the normal diet of the sequences.

• Latitude 10 - ST2 Dock HDMI problems

  I just pulled up on my docking station and found that it worked perfectly out of the box.  Unlike some others who have had problems, I felt lucky until I tried to get the HDMI to work with my Dell monitor.

  It's about that simple, the monitor does not detect a device and the device does not detect an HDMI monitor.  I've updated the BIOS and drivers Intel for the latest versions from today and still nothing.  I'd appreciate any advice or experiences like mine that could help me to get this resolved.

  Quick update on my situation.  I was able to get the dock running after realizing that you cannot convert HDMI in Display Port, only the opposite.  My monitor DELL Professional is not HDMI, there a display Port.  Not sure who came up with this idea, but it seems that HDMI is a standard that is good enough to not have to create another.

  In any case, I was using a HDMI Display Port adapter--> and after reading upwards, is that you can convert only the signal in a way.  Turns out the other way, of what I was trying.  If you have a video card that has a display out Port, you can use this adapter to convert to HDMI.  I do in fact with another computer of mine.  However, if you have a monitor with a Display Port, you can not convert HDMI Port to display in this way.

  Anyway, I ended up finding a DVI switch and turned the HDMI/DVI monitor and everything works fine.  It's a little weird for the signal on the screen, but as you mention, if you start the camera on the dock, it seems to detect the signal.  Without that, it seems random as to if the signal is getting sent to the monitor.  Sometimes, the monitor just says not: 'no signal' until I have restart the device.

  Thank you all for the contributions.

• Dell Latitude 10 ST2: Screen very dark after the Windows Update 8.1 & gameplay of Diablo 2

  Hello community,

  I just got a new Latitude 10 ST2, and I really appreciated the help until after that I updated for Windows 8.1 and played some Diablo 2. For some reason, my brightness is now always very low, regardless of whether the Adaptive brightness in my power management setting is enabled or disabled. I can manually change the brightness, but it has very little effect. It seems that the maximum brightness is really low for a reason any.

  I don't know if Diablo 2 has nothing to do with this problem, but I though that I would include it here because it uses very outdated graphics techniques that seem not very compatible with Windows 8.1. I had to change the compatibility settings of the game executable for Windows XP Service Pack 2, force them to run with 16-bit colors and also to disable the composition of the bureau. After closing the game, icons on the desktop still seemed a little wide (they looked rather 16-bit color and had some weird artifacts) and I had to restart the tablet to correct. After the reboot of the Tablet, the desktop icons were back to normal, but my light issues began to arrive.

  My first attempt at solving this problem was in the shape of the tablet. I used my USB stick that has the factory settings on it to format the Tablet and reinstall Windows 8. The process was a success, and I had no problem of brightness either. However, after the update to Windows 8.1, then by restarting the Tablet, my issue with the brightness came back.

  My second attempt was to try to update my drivers. I ran the auto updater provided with the Tablet, and it updated my BIOS. Unfortunately, it has not fixed the problem at all. Then, I took a look in the BIOS and found levels of brightness in the video section. The parameters are the following:

  Brightness on battery: 7
  Brightness of AC: 15

  I've tried corresponding to the brightness of the battery at 15, but it has no effect. The light problems don't occur that the Tablet is connected to a power outlet or not, I wasn't really that surprised that it didn't work. A maximum brightness of 15 is normal? (what is a percentage?) I don't want to change these settings without knowing exactly what they represent to avoid damage.

  My third attempt has updated the chipset drivers which includes the video driver. I installed the chipset driver and suddenly after that the screen went black a few times during the installation of the brightness has been completely restored and colors looked nice and bright again. However, when I rebooted the Tablet I found that the problems of brightness was back. Very rarely when I restart the Tablet, the brightness is normal again, but it is super rare. A subsequent reboot simply results in brightness problems return immediately.

  A few other things worth noting that come with the light problems:
  -All color gradients are not smooth. You can very clearly see the differences in brightness when a picture goes to a light color to a dark like a lot of buttons in Windows 8 start menu. It reminds me a lot of 16-bit color;
  -Whenever I try to change the display settings in the Intel Graphics and Media Control Panel, nothing happens. No matter how much I fiddle with the brightness, contrast or gamma, nothing changes, even after you apply the settings.
  -Diagnostic in the BIOS tests said that everything is OK;
  -The complete diagnosis provided by the PC Dell Diagnostics program showed that each test passed successfully.

  I really hope that someone can help me with this problem. The screen is also very dark, it makes it quite difficult to use tablet. Thank you!

  Kind regards

  StevenD91

  Thanks for the reply! After much trial and error, I discovered that my graphics driver has been be corrupted by AVG 2014 somehow. After yet another format and reinstall of Windows 8, but without AVG 2014 this time, everything works great! : D

• Light sensor does not work

  I love my motorcycle G (from a 520 Lumia)

  My only problem is that when the brightness is set to auto, it does not change. Outdoors or indoors, there is no difference at all. I am under android 4.4.2

  When the value 'auto', the brightness will at least regardless of the situation.

  I download an app called Android sensor box and checked the light sensor module. It continues to show 2.0 luxuries, no matter if it's dark or full sun. It seems to be damaged material. Does anyone else have this problem?

  I thought so too. It works fine however take some time to adjust the brightness of the screen. I installed the app you mentioned, and it showed changes in brightness. Looks like it is a problem with your own only to the definition.

• Light sensor does not work after update of the lollipop

  I run the diagnostic test on my device after that the update and the failed.it light sensor was functioning normally with kit Kat 4.4.4! Another bug? Can anyone help?

  @daltzi

  I'm agree with @darp I not was able to recreate your issue, it is possible that an application it creates this problem, @SomeQuickAdvice start safe mode and run the diagnostics again or repair your phone with PCC

  PC Companion (CCP)

  Bridge (for Mac)

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

• Latitude 10 ST2: Wifi / boot SD issues

  Hi all

  I just got a Latitude 10 ST2, which came with Windows 8 Pro installed. I'm having a few problems this long search has always been able to resolve.

  First of all, I can't connect to our wireless business. The search led me to Microsoft KB2749073, which describes in detail an incompatibility between Windows 8 pilots and our Cisco access points. A single action, he recommends is to upgrade to Windows 7 drivers. So my question is: where to find Windows 7 drivers for the device wireless in Latitude 10 ST2? (She appears as a Broadcom 802.11abgn SDIO)

  Secondly, I was wondering if it is possible to boot from an OS on an SD card. I read a few guides in this area, but they were written for the Surface Pro and do not seem to apply to the Dell. I tried taking top flight and get in this menu, but it does not contain an option for the SD card. There is an option somewhere that I'm missing?

  Thanks for reading!

  The Latitude 10 comes with active secure boot.  If you disable this option and you enable start inherited, you could be then boot from an SD card.

  J

• Light sensor ambient flow 8.

  Is flow 8 supports, ambient light sensor?  Changing light/brightness manually, it's really annoying...

  Hello, unfortunately 8 Stream doesn't have an option of automatic screen brightness. The fastest way to make the brightness adjustment is to tap the icon at the bottom of the screen.

• light sensor

  can I use my light as a charger for my battery sensor? ... If it isn't... what happens to the current generated from it?

  @AbdelrahmanHamoda

  Could you develop, how you try to use the "light sensor" as a "charger"? It is not a solar panel

• UHD monitor with ambient light sensor

  Hello

  I'm looking for a monitor with a light sensor, which automatically adjusts the brightness according to the level of light inside the room (similar to that of Eizo ev3237, for example).

  The resolution must be at least 3840 x 2160 (with the support of 60 Hz).

  Is there any monitor Dell equipped with these features?
  Concerning

  Hi eldhash,

  Adaptive brightness, and ambient light sensors come only on laptops and mobile devices.

• BlackBerry Z10 proximity sensor and light sensor does not

  My proximity and light sensors do not work. The expert virtual blackBerry does not detect movements in proximity sensor test and shows that these sensors are available and not able to handle low light or high light sensor. What should I do when I contact blackberry help via twitter they sad you os version is superior who supported our carrier it's my fault I have to update when you ask me. there is no any direct contact of costumer care help email

  I think that this can be done through leaders of serivce center you should
  contact with them.

• U260: Ambient light sensor appears not functional

  Ambient light sensor does not seem to work even if enabled in the Lenovo power utility.

  Any ideas?

  (Windows 7 x 64, clean system)

  Thankx

  DJK

  This works. Maybe it worked right from the start, but I just does not recognize that. I'm sorry.

• Screen light sensor

  Hello, I have a problem with the Z5 perhaps compact cause automatic light, the sensor, cause sometimes the screen is quite dark same Sun and other times she keep changing the lighting... and that make it difficult to see the content. How can you trouble? Is this normal? Thank you

  Hello!! I watched the Adaptive brightness Meanwhile and I must say that it works really well, but it is so sensitive that any movement in a different direction where is the difrent brightness changes, so if I'm in a place with a few different intensities of light I need to put the mobile in the direction it's better (as I am I have a place with the light above me) (, but behind it is less the sensor takes a bit less, I hope it's a good explanation). The problem may be known as resolted on my part at this time Cheers

• Dell Latitude e6430 core i5 heating problem

  Mr President, I have Dell latitude e6430 running windows i5 is 10 having heating problem it is light enough heat to burn the hand on the left side of the laptop and that's when the battery is also reduced. Please kindly help me solve this problem

  

  I like to think of that update you the System Setup (BIOS). Please enter your service tag (or use automatic detection of your product) on the link below and then click BIOS.

  www.dell.com/.../Products

  I also suggest to read the article in the link below, if all goes well it help.

  EDIT

  Download.cnet.com/.../troubleshoot-your-Windows-Laptop

  

  Learn more... >

• charge light flashing problem with hp probook 4530 s [redacted]

  I have a problem with my hp probook 4530 s serial number: [edited by Moderator]. A few times while I use the continuous orange light flashing load on the battery and if I stop the laptop and try turning on the laptop, the orange charge light blinks 8 times and it is not running until I remove and insert using battery me back.kindly I'm so nervous.

  more information:

  Windows 7 ultimate 64-bit

  BIOS version: F.25

  [number removed for privacy]

  Finally, I think it worked.

  bios for update

  Version: F.40 (March 12, 2013)

  its almost 10 hours and I load/unloaded my laptop 2 times and his works fine. mashAllah.

  No problem flashing light up now.

  hope I never face again the blinking light problem. God willing.

  Here is the download link for the latest version of the bios:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5060880 & prodNameId = 5060882 & swEnvOID = 4053 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-116443-1

  Note: the BIOS update is sometimes risky, so be careful and follow each instruction.