Light sensor does not work

Similar Questions

• Light sensor does not work after update of the lollipop

  I run the diagnostic test on my device after that the update and the failed.it light sensor was functioning normally with kit Kat 4.4.4! Another bug? Can anyone help?

  @daltzi

  I'm agree with @darp I not was able to recreate your issue, it is possible that an application it creates this problem, @SomeQuickAdvice start safe mode and run the diagnostics again or repair your phone with PCC

  PC Companion (CCP)

  Bridge (for Mac)

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

• BlackBerry Z10 proximity sensor and light sensor does not

  My proximity and light sensors do not work. The expert virtual blackBerry does not detect movements in proximity sensor test and shows that these sensors are available and not able to handle low light or high light sensor. What should I do when I contact blackberry help via twitter they sad you os version is superior who supported our carrier it's my fault I have to update when you ask me. there is no any direct contact of costumer care help email

  I think that this can be done through leaders of serivce center you should
  contact with them.

• Tecra A11 - 11L - fingerprint sensor does not work

  Hello
  I had a problem with my Tecra laptop. The fingerprint sensor does not work since yesterday. It also disappears from the hardware Manager. I tried to reinstall the utility, but the setup.exe will not run successfully. When I try to install the utility directly from the amd64 Directory installation will be successful, but the software is unable to connect to the fingerprint sensor. I also tried to install the original Windows image, but the sensor does not work.

  You have any ideas?

  Berst cordially
  Thunder1988

  You can try a BIOS update and set the default BIOS. If it still does not appear in Device Manager, the player is maybe defective or there is a connection problem. I'm guessing that the laptop is still under warranty, you may have to send the laptop to a Toshiba repair center.

• Satellite A300 - 1GN PASGCE - LED light button does not work with Win 7

  I improve my laptop for windows 7 everything works fine but the touchpad multimedia light led power button does not work.
  Play, stop, next work earlier but not the light / off does not work.

  No idea why?

  Hello

  Maybe it's a question of s a Win 7.
  I mean that the software is not intended for Win 7 but only for Vista.

  But you should check if you can reconfigure this button again.
  In Toshiba Assist-> optimize, you can find the Support of Toshiba Button tool.
  This tool can be used for the new configuration of the control buttons.

  First click on the button that you want to reconfigure and target path you can then choose the path to the exe file that must be executed by pressing this button.

  As far as I know that the exe files are placed in the program files/Toshiba/TSB folder.

  You will find different applications and one of these applications control the light on/off.

• The fingerprint sensor does not work

  Hello, I have reset windows on my laptop and the fingerprint sensor does not work, windows recognize the sensor, but in the Device Manager, windows says there is a problem with the sensor, "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Thank you for your attention

  I finally found the problem reset the pc thanks for your attention somehow

  Good day.

• Pavilion dv6 Validity Sensor does not work

  Hello..

  I reinstalled my Pavilion dv6-3300se, reinstall all drivers. But there is a problem. Validity sensor does not work and SimplePass Identity software is not found, even if I can find (DDK validity sensors) (default programs). I reinstalled it milion times but no use of it.

  Althouth I downloaded the latest version from the support page of the drivers on the HP website for my HP Pavilion dv6-3300se, validity sensor no longer works

  NEED HELP FAST

  Hello

  An option to try and install the latest version of SimplePass on the link below.

  http://www.EgisTec.com/websitedownload/patch/BioExcess/RELEASE7.1BUILD5.9%20BIOEXCESS7.1B5.0-HP.zip

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip , which can be used to open it so that you can run the installer - just click with the right button on the zipped file, select 7 - Zip, select extract files and click OK. Setup for SimplePass located in the newly extracted folder.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• HP DM4-2070US fingerprint sensor does not work

  I have a HP DM4-2070us, and the sensor does not work. I reinstalled Win 7 Pro 64 bit with all the drivers of HP and all updates from MS, but the HP Simplepass software will not recognize the drive. I uninstalled the driver and Simplepass software and reinstalled both using all versions listed for my model on the support page of the HP drivers. The drive is correctly listed and shows installed in Windows 7 Device Manager. I installed another unit of material Validity Sensor and still the same issue.

  Yes, so apparently the software downloads & driver from HP support was insufficient to restore the function of sensor of fingerprint on top a new installation. It's a machine on which someone had partitioned and formatted the drive. I cloned the drive from an another DM4-2070us with the original configuration of the software and then it worked. Thanks for the suggestion.

• my laptop computer vpcsb16fg prints print sensor does not work

  I have sony vaio vpcsb16fg notebook and his impression fingerprint sensor does not work as I had sony remote India too but I was told that my laptop is having hardware problem, help and how this problem will be corrected.

  Hello Verhoeven.

  Try following the steps below and check if it works:

  Download and install the driver of fingerprints from here: http://download.sony-asia.com.edgesuite.net/vaio/downloads/Win7Original/20111Q/VPCSB/AUDFPD-00243103...

  Then, reinstall software TrueSuite software VAIO Care following all the steps here: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1017143

  Then, try to register a fingerprint and check if it works.

  Then, perform a restore of the system to an earlier time when it worked very well: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1003813

  Then, perform a full system recovery to restore your computer to factory settings. Restart the computer, keep pressing the F10 key continuously, press on enter key at the start of editing option, Recovery Wizard, select start and click on ignore VAIO Care rescue (if you do not want to back up data) to start the system recovery process.

  Note: It is necessary to backup all data before performing the system recovery as it erases everything from the computer.

  If the problem persists, contact Sony support team in your country to start the service: http://www.sony.net/SonyInfo/Support/

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Passport for blackBerry proximity sensor does not work

  Hello world.

  I just got my new passport and it's great.  But the proximity sensor does not seem to work.  When I hold my face during a call the screen stays on and sometimes I press the screen options.  And when I use the flip on for power saving option, the screen lights up as well.

  everyone knows this, or am I just a loser?  Should I get reversed as it is during the first two weeks?

  To close out this thread if you are experiencing similar issues please reboot your device.

  For more details, please see the bulletin this KB > KB36375 The BlackBerry Passport sensors communicate is no longer with the BlackBerry 10 software. Thank you!

• Pavillion dv7 6c95dx: print software prints and SimplePass sensor does not work

  Hey there,

  I have a HP Pavilion dv7-6c95dx and prints print sensor and SimplePass software does not work.  I am unable to find the relevant drivers/etc on HP website.  Any advice would be appreciated.  The unit was bought in the USA.

  Thank you.

  Hello:

  I think that this driver since the dv7t-7000 will work as well as the security software to save your fingerprint.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103013-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5273846&sw_lang=&product=5273735

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117897-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5273846&sw_lang=&product=5273735

• Tecra A8 fingerprint sensor does not work correctly

  I bought a laptop Tecra A8 which has as security option touchchip fingerprint coprocessor. He worked only 8 days and then have not read my fingerprint. By device mananger I uninstalled and reinstalled drivers auotomaticlly and was the message to the device mananger "working properly", but it does not work! I tried to fix its software in the control panel (programs), but it dose not work again.
  What is your suggestion?

  Hello

  I Don t know what software you have installed on your system and how is your configuration, but if you've already tried this steps you mentioned while it should the next step be a full recovery from your system with the recovery media that shipped with your machine.

  Don t forget to back up your data on external media. ;)

  By the way: If the recovery does not help, then you should contact a local servicepartner since you have warranty on your machine.

  If you really want to find one in your country then click here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Tecra A9 - fingerprint sensor does not work

  My Tecra A9 is less than 2 weeks old. The first day, the fingerprint sensor worked for a few hours. I registered three fingerprints. Since then when I drag my finger, 99% of the time it does not recognize or gives a message 'too short', although I followed the steps in the tutorial.

  There is a window where you can test the fingerprint sensor trying to drag prints. I asked the other two persons, of different ages and gender, to try it, but very rarely is he not successfully registered printing.
  My call to the support wasn't very helpful because I was threatened with charges of £35 if they find nothing wrong with the hardware. As a normal user, is not what it says on the Tin.

  Has anyone had the same problem and managed to resolve it. If so, how? If not, are there other people in the same situation?

  Hello Assa

  It's very strange. I didn't notice any problem on my Tecra. Please start Fingerprint Control Center and check the first option that it fingerprints. Under registration or change fingerprints, you will find option run interactive tutorial with exact explanation how to use the fingerprint sensor and your fingers correctly.

  To be honest, I do not think you have a hardware or software problem, but you must be careful how you drag your finger.

• Satellite A500-138 - lighting buttons does not work even in the BIOS

  Hello.

  I'm just curious to know if anyone else has a problem with the (play/pause excatly) multimedia keyboard backlight? Mine died today, and there is nothing I can do to make it work again.

  The key still works, but when I turn on the backlight, backlight on everyone, but the play/pause (the backlight of the other keys work, touchpad and Satellite logo too).

  I use Windows 7, but the problem persists even in the BIOS.

  I think the backlight of the button is just dead.

  I have to admit I'm really disappointed with this laptop. Config is great, design and are also involved, but I can just take the couine noise that makes C2D (RMClock, one utility, I know that to solve this problem, does not recognize the A500 motherboard) and the fan almost never works to 70%, and now that the backlight...

  If the backlight of the multimedia key stops working after 3 weeks of use, which will be in the future? It's too scary to think ;)

  I was really excited by Toshiba, but day after day I come to the conclusion, that it is the first and the last laptop that I bought at Toshiba - never had similar problems on other laptops, same nonames.

  Of course, I know that I can has sent for fix, I guarantee (and wait about a month to get a backlight fixed stupid). But why hell not the backlight stoped working, if LEDs vitality is long as hell? It can mean two things: I really don't have a chance, or Toshiba did not pay too much attention to detail during production A500s. And after 3 weeks of use, I fear that the second option is much more likely...

  Then, someone has a feeling similar to this topic? And someone has a problem with backlight?

  Hello

  He damage of s to hear that your light has stopped working, but I think that it s just a software problem.
  I have a Satellite A500 equipped with buttons of enlightenment and everything works great with Vista and XP I m very satisfied.
  Unfortunately until that yet I didn't test with Win 7.

  I doubt you want to send this laptop for ASP, as I said, there seems to be a software problem and you can find it easily
  You must set the notebook to factory settings I mean that you must use the recovery disc in order to get the same State as on the first day of purchase

  Moreover, I visited the European driver of Toshiba page and, unfortunately, I didn't see no Win 7 drivers for this series at this time
  I guess that Windows 7 drivers will be released in the near future.
  So I wonder how you came to the button illumination because this feature requires the Toshiba driver and tools as well as the drivers aren't there?  :|

• Validity Sensor does not work after a while

  Hello

  I have a HP DV5t with windows Vista running on it. The fingerprint sensor works very well for a while when the system is started, but then does not respond when I slide my finger on it.

  In addition, I go to services and see the service Validity Sensor has the status 'on the road', but then when I restart the sensor service starts to meet again for a short period of time before it returns to the dormant mode again.

  The time it takes to reach the stage where it stops responding is not consistent. Could you please help me identify the problem and fix it?

  just an info. . I tried recovering system, driver upgrades/restorations to date but in vain.

  Thanks a ton!

  Prashanth

  I think you're right and it comes down to a driver problem.
  There is probably a problem with the sensor when it shuts down or trying to 'wake up '.
  Whatever it is, you will probably have to wait just for the seller to come out with a patch.

  Are there settings in software sensor that have to do with power? I doubt it, but it's worth the trip.
  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.