Latitude 10 + Windows 8.1 fingerprint reader?

Similar Questions

• cannot log on to windows with the fingerprint reader

  I can't log on to windows with the fingerprint reader after the bios update.

  I've updated to 8.1 windows

  Hello again degyimah,

  I am pleased to have been able to help you get your fingerprint reader works once more. If you can mark my post with an acceptable Solution, it will allow others with the same question to easily find the solution for themselves.

  Thanks again and have a great day!

• Windows 7 RTM fingerprint reader and webcam for TX2 driver status

  I read somewhere on the site of HP windows 7 drivers for this TX2 - 1027CA won't be available until October 2009. Still I use it now, and the main system works well. There is a problem in the fingerprint reader and perhaps the webcam for me at this point. Until that HP provides drivers updated, I was wondering if there may be versions beta drivers for the TX2 I could try. I am ready to continue using windows 7, but I would try to install the drivers updated as soon as possible. Maybe it's two months away and one month after the availability of the operating system for MSDN subscribers (several companies and developers). I guess this list of reading, some other people who have found what is and is not possible on the TX2 today under 7. Could you give us a brief run down on what drivers are working or not working do not? Fingerprint reader and webcam are of great interest for beginners. My goal is to run what can work.

  The WebCam driver installation is not necessary. You can use the MediaSmart WebCam software to test

  Link: ftp://ftp.hp.com/pub/softpaq/sp43501-44000/sp43591.exe

  Driver fingerprint (beta):

  32-bit: http://win7beta.authentec.com/W7Wbf32.exe

  64-bit: http://win7beta.authentec.com/W7Wbf64.exe

• T420 Windows 8.1 fingerprint reader

  Lenovo Fingerprint Reader software is not Windows 8.1, any help?

  Hi all

  I found a solution for the integrated software for Windows 8.1 finger.
  So, currently, it's for my T500 but it could work with T420.
  According to Microsoft, the finger native connection manager works if the finger sensor driver is based on the 'Windows Biometric Framework'.
  Then, I remember that on the AuthenTec support site, it was possible to download a compatible driver, but since the recovery by Apple, this support site has disappeared.
  We have a chance that the internet has a backup for drivers

  From the link below, you can find the driver for Windows 8.1-compatible finger.
  If the link does not work, try searching for the name of the driver on your favorite researcher: "WBF3.4.4.1027."
  http://www.Touslesdrivers.com/index.php?v_page=23&v_code=36153&v_langue=en

• W530, 10 Windows, fingerprint reader

  Hello

  I did an upgrade of Windows 10 8.1 using Microsoft systray app.

  But my fingerprint reader does not work in Windows.

  It works during boot, because I have it set to require a fingerprint when turn on/off the machine.

  In the Windows Device Manager, I have a biometric co-processor with a yellow exclamation mark with the following error:

  Hello
  After the November 10 Windows updated my fingerprint reader works now!

• For hp dv7 fingerprint reader works does not after update to 8.1 windows

  Hello

  I upgraded Windows 8.1 Windows 8.  Before updating the finger print reader worked. I used it to connect to websites in any browser Firefox. I also logged into windows with my fingerprint reader and the screen unlocked the same way.

  I have updated all the drivers according to the instructions on updatig before windows 8.1 and after update.  I checked that everything compatible with windows 8.1 again by the instructions before putting up-to-date.

  After that update the drive light will not read the finger scan and the light does not illuminate. I went to the control panel to check the driver and he was later. I ran the windows driver verifier and on the HP site checked for validity sensor driver is up-to-date.  When I open simple passage it says congratulations you can connect in the window by the touch of the finger. When I go on Internet sites I have red cells connected with simle pass, he now seeks to connect with the password "master."

  Any help would be appreciated!

  Thank you

  BattleAngelita,

  Welcome to the HP Forum.

  Does the SimplePass asks your for your master password Windows means that the program has survived the process of upgrading to Windows 8, 1 - somehow.

  You can start with the following:

  • Create a Restore Point > create a restore - Win7 Point ORcreate a restore point Win8 
  • Close all your programs and shut down your computer
    • Unplug everything (little unifying for the keyboard / mouse external can stay)
    • Perform the Hard Reset for your laptop
    • Start the computer and connect
  • Check is SimplePass himself has sorted them.

  ==========================================================================

  You can try to update your SimplePass program to the latest version in the series of version 6.x.

  Before you do this, read and follow the instructions to export your Webcards in your .tsd file.  Regardless of whether the Web site connections are working right now; you need this backup in case you lose your HP SimplePass program (thanks to the complete removal / reinstallation or if corruption).

  Then, consider updating the HP SimplePass program to the latest version 6 series.  If you are already using the latest version, consider other options in the guide, including the "Repair SimplePass" procedure.

  Open the file > click Download > click 'open in Adobe Reader.

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• HP DV7-7240us fingerprint reader problem

  8.1 Windows recognizes the fingerprint reader, but if I try to connect it says that error preventing use of your fingerprint credentials. I have all the updates to the BIOS, the fingerprint driver and HP simplepass. HP simplepass closes after that I scan my fingerprints. What should I do?

  I actually solved it by uninstalling the driver and the software, and then restart the computer. Then I reinstalled the driver and it worked!

• Qosmio X 500 - 11 d: Fingerprint reader question and webcam problem

  Hello

  I am the owner of a portable X 500 - 11 d of Qosmio computer and I ran into a few problems these last time:

  1. After installing windows 7, the fingerprint reader has worked flawlessly for about a month, but now the login screen of windows 7 not poster not the option to connect with the fingerprint and when I try to start the utility of fingerprint toshiba it gives an error could not connect to the sensor.

  The strange thing is that I can't find the finger print sensos under Device Manager. Windows just does not detect it. I tried to reinstall the drivers and software, I've updated the bios but nothing works.

  2. the camera on the laptop, it is installed properly (the said driver is ok) but when you use the image is all black. I should mention that the blue light turns on when you use the camera.

  I tried to find a solution to the fingerprint issue o the forum here, but nothing has been using, hope someone knows how to solve.

  > The strange thing is under the Device Manager I don't think the impression sensos finger; Windows just does not detect it. I tried to reinstall the drivers and software, I've updated the bios but nothing works.

  Well, I m sure this laptop model X 500 - 11 d supports the fingerprint sensor.
  Please set the BIOS to default settings and check if there is a BIOS setting that can enable or disable the fingerprint sensor.

  > 2. The camera on the laptop, it is installed properly (the said driver is ok) but when you use the image is all black. I should mention that the blue light turns on when you use the camera.

  I had the same problem. In my case, that the room was too dark and the cam didn't work well. I had covered the lens of the webcam and after that I withdrew my finger from the webcam, webcam worked again. Notes; the room was very bright and the probe could catch the environment. I don't know if this could help Mr. maybe, you need to uninstall the webcam software before you try this procedure

• HP ENVY 17 Notebook PC TS: Fingerprint Reader driver issues

  Before I upgraded to WIndows 10 my fingerprint reader work properly.  I used it to connect to the laptop.  After the 10 Windows, upgrade and update of my first Norton 360 to a compatible version of windows 10 I got an error in for the fingerprint reader device manager.  I uninstalled the driver (Device Manager said that the registry entries have been corrupted).  After four hours of trying to find the right driver on the HP site, I was able to install validity sensor Driver version 4.4.232.0 dated dated 18/08/12, which recognizes the device.  However, it now under the tab ' events/information"error message:"USB\VID_138A & PID_0050\2012482178ab device still requires the installation."

  The fingerprint reader is completely ineffective: no lights at startup.

  I'd appreciate any help anyone could offer to solve this problem.  The fingerprint reader is a nice feature.

  Thank you

  Bill

  Hello @Bill38,

  Thanks for the quick response!

  Have you tried to find the drivers for you fingerprint reader, using the link above?  You can also use Windows Updateto search for the drivers that are compatible with Windows 10.

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  Please consult the following document as well and let me know if this can help:

  HP Notebook PC - a (Windows 8) fingerprint reader troubleshooting

  I hope this helps.

  Kind regards!

• Fingerprint reader is not detected

  Hello

  I currently have a thinkpad T400 2767 and until a few weeks ago, it was working fine, but then I got an error device not recognized in windows and the fingerprint reader stopped working. I rebooted and it was gone. Not in Device Manager, or even in the BIOS options. I googled and can't find someone with the same problem.

  I was wondering if anyone has recommendations, and if the purchase a new drive would solve the problem, because I know they're tempremental.

  Thank you

  This seems to have solved the problem.

• Fingerprint reader does not work under Win 7

  I have a T500 which I just upgraded from Windows Vista business to Windows 7 Professional.

  Everything except the fingerprint reader and Wireless Broadband seems to work.

  The fingerprint reader is Authentec AES2810, with driver version 2.0.0.18 dated 24/11/2009.

  If I run the footprint of Lenovo software version 3.3.0.58 I get the error that the software cannot

  communicate with the probe.

  Wireless Broadband card is the Ericsson F3507g. The following drivers are installed:

  Network cards:

  -F3507g Mobile Broadband Driver, version: 1.0.0.52 dated dated 29/07/2009

  Ports (COM & LPT):

  -Ericsson F3507g Mobile Broadband minicards GPS Port (COM6), version: 1.0.0.28 dated dated 29/09/2008

  -F3507g Ericsson Mobile Broadband Device Management (COM4), version: 4.54.7103.1 dated dated 26/06/2009

  Chip card readers:

  -F3507g Mobile Broadband USIM Port, version 6.0.0.7 as of 12/05/2009

  Even if there is information about the drivers listed above says the USIM card device:

  "No drivers are installed for this device".

  Universal Serial Bus controllers:

  -F3507g Mobile broadband device, version: dated 4.54.7103.1 dated 26/06/2009

  If I use the ThinkVantage Access Connections software, I get the following error message:

  "The current wireless WAN connection is managed by another client utility.

  Close the client utility, and then try again. "But to my knowledge no other wireless broadband client is running.

  If I try Mobile Broadband Connect through Vodaphone UK interface, I get the following error message:

  "No found Wireless Broadband Mobile device."

  And finally, if I try ThinkVantage GPS I get the following message:

  "The GPS NMEA CPM port is not available. You should check the following things.

  -Another GPS application using the COM port.

  -COM port is disabled. You can activate the COM port in Device Manager.

  Windows Vista, the fingerprint reader both the wireless broadband device worked without

  all of the problems. Anyone have any ideas on how I can solve these two problems.

  Best regards

  Frode

  Hello FrodeW!

  Can you do me a favor and test this theory please (use the driver Lenovo Authentec, do not use the Microsoft Update driver):

  http://forums.Lenovo.com/T5/R-series-ThinkPad-Laptops/problem-with-my-fingerprint-reader/m-p/209486#...

  Thanks in advance.

• Fingerprint reader not recognized on laptop Pavilion dv4t-1400

  In this last week, my fingerprint reader is no longer running on my laptop Pavilion dv4t-1400. I think that he stopped when last week he had two usb problems which are still pending - that is to say, under Device Manager, there are two USB keys with a yellow warning triangle and after trying to help out, he said: "Windows has stopped this device because it has reported problems. (Code 43) ».

  I reinstalled the Validity Sensor software several times, but it does make a difference.

  BTW, to the best of my knowledge, there had not been any new software updates before the USB errors.

  This problem is solved when I turned off my laptop, unplugged the adapter and all external connections, removed the battery, expected a minute, resinserted the battery and restarted my PC.

  Validity Sensor driver has been added automatically by Windows, and my fingerprint reader is now recognized and working.

• Dell Latitude D820 Vista x 32 bit fingerprint reader?

  Hi, I got a Dell Latitude D820 with 32-bit vista. I just found out that this laptop has a fingerprint reader between two things of click of laptop. I THINK I downloaded the driver for it. Now what should I do? How can I get this set-up all and working properly? How can I do if I can use it instead of a password at the windows logon screen.

  Any help in getting this work will help me much. I've looked everywhere and I can not understand how it works. I insisted want to know how to operate it. I'm not so smart in computer terms, please try to keep things simple. Thank you very much.

  Hello

  The fingerprint for the D820 reader is an optional addition.

  Because your really make install...?

  Search in start - all programs

  "Wave Systems Corp EMBASSY Trust Suite.

  It seems there is no real documentation.

  Wave Systems EMBASSY Trust Suite Corp.
  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R175929&SystemID=LATITUDE%20D820&servicetag=&os=WW1%20%20&osl=en&deviceid=12628&devlib=0&typecnt=0&vercnt=2&catid=-1&impid=-1&formatcnt=0&libid=50&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=239171

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Fingerprint reader E6230 has stopped working in Windows 10

  Latitude E6230 fingerprint reader no longer works after upgrade from Windows 10. Drive is recognized in Win7, but not in Win10. Reinstall the OS several times, same result. Pilot applied security Dell P5T4G but same result. State of the device: this device cannot start (code 10) current device power state cannot support this request. USB\VID_0A5C & PID_5801 & MI_03

  has finally got the fingerprint reader to work on the E6230. on the driver page, go to the Security section and downloaded the HP driver and firmware of CV. Installation of the HP driver first, then apply the updates to the firmware. You may need to run ushupgrade with "run as Administrator". Turn it back on. He has worked on two of our E6230, maybe it will work for you.

• Pavilion dv7 6051ea: how to get the fingerprint reader works on Windows 10

  Just upgraded to Windows 7 Pro for Windows 10 Pro. The fingerprintreader has stopped working. I find the possibility to set up, but the installation is grayed out as long as no driver available. Can't find one on any forum support? Anyone else having this problem and sorted it please?

  On August 11. I've been running Windows 10 updates on a daily basis since the upgrade and now after a reboot of the fingerprint reader has started working? and remembered my impression as well. I guess that Microsoft dropped in a fix for this (which works for me) then maybe something to try?