Latitude XT Tablet Crash after upgrading RAM

Similar Questions

• Satellite 1800-400 does not start, or crashes after upgrading RAM

  I have the original configuration of RAM for the S1800-400 with 120 MB. I bought a 256 MB RAM with the following description: EXT256-3069/JR, MEM 256 MB RA Toshiba Satellite PRO 4600 series C650, PIII-7500/750/800 #PA3069U (I think the brand is Transcend).

  When I put this slot in the machine, keeping the original and start the computer, it does not start, either on the initial screen of freezing before downloading anything either or that goes to the screen where you can start it in safe mode, but then it does not start.

  I removed the new RAM and it works well again.

  What can be the problem:

  (1) is this new RAM is not compatible with the computer? Based on the selections of the internet service provider, it should be (it's a Portuguese company with their own memory configuration options).

  (2) the computer can work with the original 120Mo and the new 256 MB, or should it be both the same size/brand?

  (3) is there any other problem that I don't have?

  TKS

  Hi Ricardo

  I agree with feliks.
  The module is not compatible and not taken in charge can be responsible for your problem.
  The best way is to use the Toshiba recommended of the memory modules.

• iTunes crashes after upgrade to version 12.4.3

  Hello

  whenever I start itunes after the upgrade to version 12.4.3 the following occurs:

  The application starts, it checks the mediathek itunes, the iTunes window opens for 1 or 2 seconds, and then the application crashes.

  What can I do?

  Hold down the option/alt key and create a new test library. If iTunes start your old library file is corrupted and will need to be replaced from a backup or rebuilt from scratch.

  Turingtest2 CSA user help document: empty/corrupted iTunes after upgrade/crash library - https://discussions.apple.com/docs/DOC-6561

  If you do not see your content after updating to iTunes - https://support.apple.com/kb/HT203225

  If it does not start, you will need to study along these lines:

  First of all, try to restart your computer.

  How to test a question in an another user account on your Mac - https://support.apple.com/en-us/HT204443 - "you can connect as a different user to see if unexpected behavior is related to the user's specific settings or files."

  iTunes: solving problems with third party plug-ins iTunes - https://support.apple.com/HT203395 - press Option and command (on Mac OS X)

  How to test a question in an another user account on your Mac - https://support.apple.com/en-us/HT204443 - "you can connect as a different user to see if unexpected behavior is related to the user's specific settings or files."

  LINC Davis February 2016 - https://discussions.apple.com/message/29767369#29767369 - remove corrupted preference files

  Reinstall iTunes:

  -Post of Niel April 2015: re - install iTunes app - https://discussions.apple.com/message/28055467#28055467 - delete the old application first, with instructions on how to do it.

  -April 2015 LincDavis post with some more details on the method outlines Niel - https://discussions.apple.com/message/28101611#28101611

  If iTunes does not start

• Satellite A660 - 10 X - no boot after upgrading RAM 8 GB, but 4 GB + 2 GB only

  Hello

  Today I bought two sticks of Kingston 4 GB DDR3 1066 MHz CL7 and I'm trying to replace my 2 GB ones, but something is wrong.

  If I put two sticks of 4 GB laptop does not start. I have the latest version of the BIOS (1.80). I have restored the default settings after upgrade.

  But it's quite strange, because if I put a strip of 4 GB and a 2 GB stick system starts and everything is fine (with memtest86 + too). But there is still one thing: 4 GB stick should be rolled in the dock before, above second, 2 GB module. If I reverse cell phone memory will not start again.

  Is - everyone knows how to solve my problem? Is this a BIOS problem? BIOS version which A660 takes in charge the amount of 8 GB of RAM with no problems? I can downgrade from the BIOS, because I don't know if Toshiba help update.

  Thanks in advance.

  Is this exact module the same 4 GB RAM listed on THIS page?

• HP all-in - One PC 19-2113w 19: white/black screen after upgrading RAM

  Hello

  So I have upgraded RAM using 2 x 4 GB SODIMM DDR3 Corsair 1600 Mhz, after installing the PC boots but screen is white/black

  steps to follow:

  1. I tried with 1 socket by using only a RAM, screen black

  2. I tried with 2 socket using RAM only one with the same RAM step 1, screen black

  3. I tried step 1 and 2 using the other RAM, screen black

  now here it gets interesting

  4 tried 1 socket using Original/factory RAM, screen black

  5 tried 2 socket using Original/factory RAM, screen black

  6. tried without any RAM at all, looks like a lack of RAM, screen black

  Now, to each measure adopted, I must say that the screen sound not only not showing things, but its totally black as it does at all, until the system starts normally. !

  Is it Possible the upgrade of RAM affect the screen? or maybe when I was replacing the RAM I hit some conecting by cable to screen or something?

  HP 19 all-in-ONE PC

  Product No.G4B06AA #ABA

  Model n ° 19-2113w

  10 64-bit Windows

  Update

  Removed the battery and hold the power for 30 sec button (BIOS reset if I'm not mistaken?) now it works with the orginal of RAM so I guess my new RAM that's the problem!

• Latitude E5520 Audio problems after upgrade to win 10

  I have audio problems after upgrade to win 10 64-bit.

  Dell Latitude E5520 IDT 92HDxxx HD Audio
  Hardware ID:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A

  (1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  (2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.

  I would be happy to provide more information and help to debug.

  To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:

  *************************************************************************
  Hello
  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows. Check their documentation online with Dell Support, and
  drivers and ask questions in the forums about known problems. Make sure that you are
  Run the latest version of the BIOS, chipset and drivers.
  I hope this helps.
  *************************************************************************

  I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  Thank you
  John D.

  johnsdagg

  AS OEM Dell is responsible for the good operation of the equipment both
  and Windows.

  Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.

  johnsdagg

  I was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

  I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.

  johnsdagg

  If I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

  The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.

• Why Windows Aero does not work after upgrade RAM?

  After that I recently updated my computer desk with 2 new modules 1 GB DDR PC3200 400 mhz 184pin RAM

  PROBLEMS:
  * Windows Aero stopped working.
  * Windows recognizes only 3.5 GB of RAM on 4.
  * Windows Experience Index will not refresh the WEI Score.
  Any help with this?
  I'm back to the old RAM modules and all is well, but whenever I update the last two RAM modules, these errors occur.
  
  MY RIG:
  OS: Windows 7 Ultimate.
  SR1830NX Compaq
  Max supported RAM: 4 GB PC3200 400 Mhz 184pin DDR (4 Slots of 1 GB each)
  Configuration of the RAM before upgrading (physical)
  SLOT 1: 1 GB
  SLOT 2: 1 GB
  SLOT 3: 512 MB
  SLOT 4: 512 MB
  (although she had 3 GB installed, only 2.5 were recognized).
  Configuration of the RAM after upgrading (physical)
  Slots 1-4: 1 GB each
  Configuration of the BIOS:
  Slot SCHEDULES 1,2 & 4: 1 GB in each slot
  SLOT 3: 512 MB (even if it has 1 GB installed in this slot)

  You seem to have a hardware failure with slot 3. See if there is an update to the BIOS of your card mother, but don't hold your breath. There may not be one and he will probably not correct the problem if there is.

  There is always to be small amount of RAM allocated to the system. Integrated video will be stick like a leech some as well as the network interface card. It's normal, regardless of the version of the installed operating system bit...

• Crash after upgrading to Workstation 10.0.6 - 2700073

  Upgrade to 10.0.6 - 2700073 this morning, and workstation crashes as soon as I start it.

  The details are in the attached ZIP file:

  -capture of screen crash

  -captures of three log entries of applications to screen the accident events

  -vminst.txt, which has been updated at the time of the accident

  The .xml file that is mentioned in one of the entries in the event log does not exist on my system.

  I'm running on a host Windows 8.1 and have been running earlier versions of workstation for more than a year on this PC.

  PC is a Lenovo Thinkpad T503

  I'm going to uninstall this version and try to reinstall the previous version.

  Someone at - it ideas about the cause of these problems?

  Had the same problem of crash after the upgrade and after some research I found this post which gives a few details why the crash occurs.

  To solve the problem simply do the following:

  Find the file libcurl.dll in your VMware Workstation installation folder.

  (I found 3 cases on my machine windows 8.1)

  C:\Program Files (x 86) \VMware\VMware Workstation\x64

  C:\Program Files (x 86) | VMware\VMware workstation

  C:\Program Files (x 86) \VMware\VMware Workstation\OVFTool

  Make a copy of the files in the first 2 files with a modified date of 04/28/2015

  Replace with a copy of the file in the 3rd record (\OVFTool) before the date last updated on 02/04/2015

  Start VMware Workstation

  This fixed the issue and no uninstall or reinstall required, I tested and did not have any issue.

  I take no credit for this that the problem was discovered in the post below, which has more details on the exact cause.

  http://blog.rewolf.pl/blog/?p=1167

• How upgrade to 64 bit Win 7 after upgrade Ram 6 GB on 3250br Pavilion DM1?

  I m going to upgrade 6 GB memory on my Pavilion DM1 3250br. Although windows indicate it is 64-bit capable windows anytime update installed 32-bit (because it has less than 2 GB available).

  1. How should you proceed to upgrade to 64-bit after upgrade memory? I don't have a system disk, only the suplyed key home premium by HP.

  2 HP has 64-bit for all devices drivers? They are in D: recovery drive or I´ll need to download the upgrade?

  3. any information you want to give.

  Best regards

  Eduardo

  Hi, Eduardo:

  You can try it.

  I know it works if you have a retail upgrade key which means that it is good for 32 or 64 bit.

  I don't know an ISO file that you get off the internet is an OEM file.

  If this is the case, it will not work. If this isn't the case, I doubt it will be.

  I have dealt only with the installations of Windows 7 using OEM disks or retail upgrade.

  Basically, the key that you use must be the same as the installation disc.

  OEM disc / ISO good with the key on the bottom of your portable forest 32 or 64 OEM.

  Plenty of retail disc / ISO only good with the full commercial product key, you get the box or the e-mail sent to you - 32 or 64 bit.

  The retail upgrade disc / ISO only good with the retail upgrade key, you get in the box or the e-mail sent to you - 32 or 64-bit.

  Upgrade Express disc / ISO only good with the upgrade retail or upgrade Express key - 32 or 64-bit if you have a disk.

  I used a disk of 64 bit Vista Business anytime upgrade to upgrade Vista Home Premium 64 bit update, and I was able to use the key from Vista Business 32 bit provided with the 32-bit disk (I had a 32-bit Vista Business retail box update but they come only with discs of 32 bits at the time and you had to order a CD of) 64-bit and pay $10. You can't even not the disks in 64-bit vista to MS.

  Hope this helps,

  Paul

  Paul

• Windows 7 Home Premium x 64: activation of the service Windows Update crashes my computer after upgrade RAM

  A few days ago I had two sticks of 2 GB GSkill RAM by mail. Here's the same brand, model and size as the pair currently installed (obviously). (Sticks alternate according to the specifications of the card from my mother)

  After you have installed the new RAM and the computer starts up, it freezes within about 30 seconds of connection. Before installing the new sticks, I had no problem whatsoever.

  My first thought is that I sit the RAM properly, then I go and reinstall it. I start, and the same thing happens.

  So obviously this RAM must be bad, right? When I take out news, not gel. Ah, but when I remove the OLD stuff and use new instead, I ALSO no gel. So maybe it is not the RAM.

  Then I reboot in safe mode. No gel. Interesting. I opened the window 'System' and it says "memory (RAM) installed: 4.00 GB ', which is correct." I opened CPU - Z, and it reports also 4 GB of memory. I run a few hours and have no problems whatsoever. So I say to myself, there must be either a Windows service or a 3rd party service is causing the issue and not the new RAM.

  I disable all services of 3rd parties and restart in normal mode. It freezes. OK, so maybe (though unlikely) I have a virus any (I say probably not because I have to) run the module additional firefox NoScript, and set to block all flash, javascript, xss, iframes, etc. - in other words, only allow to my whitelist and B) I have Windows Firewall and running McAffee and updated.). But I decided to first try Windows services for the hell of it.

  So I enable only the services that start in safe mode as my reference, disabling the rest via services.msc. I start normally and not gel. Great, then maybe it is a Windows service. I start which allows one service after another without any problem. I get to the bottom of the list and select the Windows Update service. Within literally 10 seconds my computer crashes. Large.

  As a validation test, I put all services back to the base line of safe mode and only allow Windows Update. I start normally, and again once it freezes.

  Another test of validation, I start with all normal, but disable Windows Update. Do not freeze. I'm going to start Windows Update. Yet once, it freezes for about 10 seconds. So clearly something is in place.

  As a third and final sanity check, I remove the new RAM and run a Windows Update. He finds a few optional updates, but not critical. My system is up2date.

  My only attempt to solve this problem so far was to backup all Windows Update DLLs (C:\windows\system32\wu*.dll, although I don't know if these are good) and do a scan sfc to replace them with copies of 'good '. It did not work.

  So my question is:

  Why cares Windows Update that I have 4 GB of memory installed?

  Thank you

  Jon

  1. I 'upgraded' from the RC of Windows 7 x 64 for Win 7 x 64 Home Premium.

  2. I use McAfee VirusScan Enterprise 8.7.0i, DAT version 6060, Scan Engine 5400.1158

  3 No.

  4. No, I put together this computer myself.

  ______________________

  To answer my previous posts:

  I think the USB storage is a separate issue. And.

  I think I * may * have solved the problem of origin with one or more of the following (don't know who):

  • Updated the software of the chipset of the card from my mother.
  • Updated HD Windows audio drivers to the recommended ASUS (Realtek) HD audio drivers
  • Updated since Windows installed NVIDIA display drivers for version NVIDIA WHQL.
  • Increased my tRFC (refresh time of line) to 70 52 clocks clocks. Set my GSKILL DRAM voltage recommended by 2.1V. Off the SPD DRAM configuration (I read that ASUS is not entirely based on the SPD and can affect things on its own).

  I had WU for 20 minutes from writing this post without a freeze, so we'll see. (Previously, it would freeze within 10 seconds of turning on WU)

• Satellite L30 - after upgrading RAM OS crashes and BSOD is shown

  Hello!

  I would like to know what is the problem on my Toshiba Satellite L30 series (PSL30L-0MOOD) because I have installed my RAM of 256 MB 1Rx16 PC2-4200 s-444-12 to an Apacer 2 GB DDR2 667 mHz... All of a sudden my windows crashes and displays a BSOD (Blue Screen Of Death) and just restarts.

  I need help because I think there may be a problem in my RAM upgrade... Thanks for the help guys!

  Hello!

  You only use the new module of RAM or both?
  If you use both, try again with the new module.

  In your case I would test the RAM with special programs like Memtest86:
  http://Memtest86.com/
  Download and burn it to a CD and then boot from it.

  Good bye

• Firefox 4 beta too slow / crashing after upgrade memory?

  Hello

  my beta firefox started crashing my whole system yesterday and only noticeable change I did was upgrade memory of 3 to 4 GB of RAM...

  I tested my system widely and it works very well until firefox is started, after that, the system started crashing and takes forever to be reactive. I uninstalled and reinstalled firefox, tried running without addons, I tried to close all the tabs and all Eske I remembered... still no luck.

  I am desperate because I really wanted to keep this beta on my computer, and cuz is a new facility, I can not install firefox 3.6 on side by side, I only have an option 'upgrade' on the installation wizard...

  What can I do to fix this?

  Thanks in advance!

  The steps to troubleshoot and diagnose problems of Firefox would say you always try in questions to troubleshoot Firefox in Safe Mode of course some additional software may conflict, it is even more likely if you are using a beta version of firefox and probably the beta or alpha some of the addons or plugins.

• [DV6-3140SL] Problem in my laptop after upgrading RAM

  Hi all,

  I want to upgrade the memory of my laptop HP DV6-3140SL model.

  Original RAM installed is a Micron 16JSF51264HZ-1G4D1, size 4GB.

  Then I bought 2 modules of the model Corsair CMSO4GX3M1A1333C9 (4 GB x 2 = 8 GB total)

  but when I installed this 2 cylinders in my notebook, start windows crashes;

  Sometimes I see Loading icon of progress, but immediately laptop restarts.

  BIOS recognizes correctly 8 GB and memory (the utility in the BIOS) test is OK.

  CMSO4GX3M1A1333C9 should has the same features as the original model of 16JSF51264HZ-1G4D1:

  SODIMM DDR3 PC3-10600 (1333 Mhz)

  What could be the problem? Incompatibility? Or faulty RAM memory?

  Note: NA is 8 64-bit Windows (W8 is an upgrade to Windows 7 original)

  Thank you for the support.

  Paolo.

  paolo220177 wrote:
  

  Hi all,

  I want to upgrade the memory of my laptop HP DV6-3140SL model.

  Original RAM installed is a Micron 16JSF51264HZ-1G4D1, size 4GB.

  Then I bought 2 modules of the model Corsair CMSO4GX3M1A1333C9 (4 GB x 2 = 8 GB total)

  but when I installed this 2 cylinders in my notebook, start windows crashes;

  Sometimes I see Loading icon of progress, but immediately laptop restarts.

  BIOS recognizes correctly 8 GB and memory (the utility in the BIOS) test is OK.

  CMSO4GX3M1A1333C9 should has the same features as the original model of 16JSF51264HZ-1G4D1:

  SODIMM DDR3 PC3-10600 (1333 Mhz)

  What could be the problem? Incompatibility? Or faulty RAM memory? Incompatible memory modules

  Note: NA is 8 64-bit Windows (W8 is an upgrade to Windows 7 original)

  Thank you for the support.

  Paolo.

  You must use the Configurator of Corsair compatibility on their Web site.

  See if you can return the modules. The modules seen in the image below are the only guaranteed compatible modules by Corsair. Unfortunately, they are not modules of 4 GB compatible to your laptop.

  

  Memory of Kingston, on the other hand, is it guaranteed compatible 2 GB and 4 GB modules of memory for your laptop. With Kingston, bars of memory, you can upgrade to 8 GB and do work correctly the first time you start it back up after the upgrade.

  

• iBooks Crash after upgrade to 9.3

  How is it without a body is equipped to answer the Question of iBooks crashing and delete all files after the upgrade to 9.3?

  As soon as I upgraded, I lost everything in iBooks. I had near 100 VIP files now they are gone.

  is there a stage of recovery that implimented can recover my files / content?

  Please HELP I can't afford to lose all my files in iBooks

  I have the same problem on my two iPads Air, Air2. IBooks after iOS 9.3 upgrade freezes constantly. Even if I managed to open it, crashes. My meticulously organized more than 4K books are now in chaos, all the sorting is lost. Half of them are without lids, have no idea how much is lost.

  I tried to reload and re-sync, nothing works. It's the same thing with my iPad 2 couple years ago when Apple has released one of their iOS update. As soon as I remember, iBooks was not working for more than a year. At least go and leave a feedback, doubt it will help, but worth a look.

• Satellite Pro A120 (PSAC0E) does not start after upgrading RAM

  Hello

  I hope someone can help me here, I recently bought a Satellite Pro A120 (PSAC0E) and decided to upgrade the RAM. I bought a stick of 512 MB of curries with the following specifications: DDR PC2700 200-pin 333 Mhz SODIMM (64 x 64).

  However, the first problem I encountered was an alignment problem. A little effort and handling solved this, but after you insert the RAM into the available slot, the computer laptop wouldn't boot, and instead, I had the flashing sequence on the LED from 2,3,3.

  I was told it might be a problem matching, then tried to remove the original RAM and booting with just the new stick, still the same error. I tried it in the slots and still no joy. It starts very well with the original 256 MB of RAM, but refuses to take the new RAM.

  Are there any known issues? Can anyone suggest something that I can do wrong? I followed the usual steps of upgrade to remove all power cables and the battery before the upgrade, but still no joy.

  Hoping that someone is able to help!

  Hi James

  You simply have bad memory modules and is not a compatible uses.

  > the first problem I encountered was an alignment problem. A little effort and handling solved this,

  This should not happen! The right modules can be inserted without any problem of alignment!
  Handling can damage the module!

  In my opinion, you should use another and supported the RAM module.

  To my knowledge, you can use the PA3512U-1M1G (DDR2-667 1 GB Memory Kit) or (PA3411U-2M1G) DDR2-533 1 GB
  The two should be compatible.