Lauch problems iOS image 9

Similar Questions

• I have remove the IOS of the aironet 1100 series by mistake and now I need to copy the IOS image file

  Hello

  I have a cisco aironet 1100 Series wireless access point.

  by mistake I delete the IOS of the router and now I need to copy the IOS image again on it.

  I need your help please.

  For now, he has the Ethernet led RED, Green State, Rdio RED. T no Cisco IOS image file the spirits).

  I downloaded the file c100-k9w7 - mx.123 - 8.jed

  and I download the tftp (tftpd32) servers

  I have the router connected directly to a pc with the static ip address of 10.0.0.2

  but the problem is actually that I don't need the 1100 router ip address right now, I can't access it through a web browser.

  and by a tftpd32 I try but no function.

  I don't know what I'm doing wrong.

  other things, it's that I did not find a clear manual on how to use a tftpd32 to transfer the file to the cisco router 1100 series.

  Thank you.

  I'll wait your hepls.

  Convert a standalone Lightweight Access Point
  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

• Cryptographic IOS image loading

  I received the following error message when you try to load an IOS image k9 on one of 2960 switches.  Can someone tell me how to solve this problem?

  Error: The image must be installed on the system 1 ('c2960-lanbasek9 - mz.122 - 52.SE')
  Error: is equivalent to an existing image and the option "/ overwrite.
  Error: was unsuccessful.  Try again, or by deleting the old image
  Error: first of all, or by selecting the option ' / overwrite.

  Almost forgot the command I used was: arc download-sw/Safe tftp://10.xx.xx.xx/c2960-lanbasek9-tar.122-52.SE.tar

  Thank you

  GLH

  You try to switch with the exact same IOS.

• IOS image using TFTP

  Hi all

  I have several 2950,2960,3550,3750 Switch

  they performed old IOS (I don't know the exact version, but I'm sure they don't support all the features and upgrade to the image of EI and newer)

  so I saw two articles

  http://www.Cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-...

  and

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst2960x/software...

  -----------------------

  so my question is to upgrade my ios to new version can I use two commands? and what is different between each CLI?

  Command1:

  first---> delete flash:

  then:

  Copy tftp flash:

  IP:

  name:

  .....

  order 2:

  Archive Download-sw [directory] / crush/recharging tftp:[[//location]/directory]/image-name1.tar [image-name2.tar image image name3.tar - name4.tar]

  So what is or what are the different between 2 commands above?

  can I use two of them or not?

  --------------------------------------------------

  question 2:

  How can I download the latest version of cisco layer 2 switch (2950, 2960) and layer 3 (3550,3750)?

  How can I find out what are the different differ between the two IOS image?  only I need (* .bin) no CMS (* .tar)

  Best wishes

  Thank you very much

  Hello

  I'll give you the method that I use to upgrade the L2 or L3 switches:

  1 install the new image of page Web of Cisco (cisco.com--> support--> DOWNLOAD), I advise you do not install the last being rather install the recommended. (It will have a star next to it)

  2. check if the version that you have installed if it has bugs.

  3. install a TFTP server on a computer that has access to an IP address on the switch (example: you can configure an IP address for management by using the command "Int Vlan")

  4 - Check the Flash on the switch by using the command "show Flash" to make sure that you have enough space.

  5 put the image in the folder root of the TFTP server on your computer.

  6. question a copy SERVICE TFTP to make a backup of your configuration. (it is always good to do a backup)

  7. issue a copy TFTP Flash to make the image to be copied on the FLASH of the switch.

  8-do a "show run | "I boot" to see images of starting on the switch.

  9. do 'no boot system XXXXX"to the old images essentially copy the output of the command in step 8 and just put none initially.

  10. do 'boot system THENEWIMAGE.

  11 - this step is not required but I highly recommend it, you can add the old image using 'boot system OLDIMAGE' he will place the old image as a secondary image just in case where for some reason any main image does not start.

  12 save changes using "copy run start".

  13 - reload

  14. use the 'view version' to ensure that the new version is in place.

  It is the process of upgrading the software on the switch. It will be useful.

  Note: Make sure that you have console access to the switch before performing the upgrade, just in case something goes wrong.

  Best regards

• iOS image support ssh

  Hello dear

  Please can you tell me the image ((c2960-lanbase - mz.122 - 53.SE1.bin)) support the ssh or not?

  If not what ios image can I charge for the 2960 G switch to support ssh.

  Thank you

  Hello sajjad_m1987,

  C2960-lanbase - mz.122 - 53.SE1.bin does not support ssh.

  You will need the crypto image that has the k9 in the name.

  C2960-lanbasek9 - mz.122 - 52.SE.bin

  You can go to the following link to search the ios which supports the functionality that is necessary.

  http://Tools.Cisco.com/ITDIT/CFN/JSP/by-feature-technology.jsp

  Hope this helps,

  If Yes, please rate.

• Cisco NetFlow and required IOS image

  Hello team Netpro-

  I am preparing the documents concerning the deployment of Netflow version 5 for about 20 sites around the world. I would like to know what IOS images can support this technology. Currently, some of our routers run the following IOS Images:

  (C7200-SPSERVICESK9-M), Version 12.4 (6) T, RELEASE SOFTWARE (fc1)

  (C2800NM-SPSERVICESK9-M), Version 12.4 (6) T, RELEASE SOFTWARE (fc1)

  (C3845-SPSERVICESK9-M), Version 12.3 (11) T10, VERSION of the SOFTWARE (fc4)

  (C3825-SPSERVICESK9-M), Version 12.4 (6) T2, RELEASE SOFTWARE (fc1)

  (C7200-IS-M), Version 12.4 (7), VERSION of the SOFTWARE (fc6)

  Don't you think that we still need an IOS update or not?

  Thank you in advance.

  Jay

  Also the information provided by the previous poster, I don't think you need to upgrade with the current images, that you have running, most SPSERVICES k9 images 12.4 versions take support netflow.

  I also suggest go on this link, and the link provided in front of me.

  http://www.Cisco.com/en/us/docs/iOS/12_4/NetFlow/configuration/guide/onf_gsg.html#wp1043332

  You can check in the search of features here in feature navigator http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

  Another simple way to check is by typing a question mark to the cli without entering the command on routers.

  example for this script very basic bellows on a router netflow put an exclamation mark without actual setting command

  interface

  IP route-cache?

  route IP cache flow

  Router (config) #ip import-export flows?

  Router (config) #ip flow-export versions?<-- should="" show="" all="" the="" versions="" supported="" 1,5,9,="">

  Router (config) #ip flow-cache timeout?

  stream of Router (config) #ip - high -?<--- for="" top="" talkers="">

  IP flow-export destination

  IP flow-export version 5

  IP flow-cache timeout active 1

  flow-cache IP 15 idle timeout

  IP high speed-flyers

  Top 10

  Sorting bytes

  (C3845-SPSERVICESK9-M), Version 12.3 (11) T10, VERSION of the SOFTWARE (fc4)< ---="" this="" one="" should="" also="" be="" able="" to="" support="">

  PLS note any useful message if it helps

  Rgds

  Jorge

• Differences in the IOS images

  Can someone point me to a link where it clearly shows the differences between images of IOS? For example how IP Base differs from Advanced IP Services for example but not limited to just this comparison? The Cisco site, where you can click on this button to show the differences don't seem to work. Thank you.

  Wrong forum really but here is a good description:

  http://nettipps.de/2010/06/09/ciscos-iOS-image/

  What about Simon
  http://www.linksysinfo.org

• Problems with images in the mail signatures and iOS

  Everyone has understood how to keep an image in his signature mail on a Mac or on an iOS device?

  No matter how many times I cut and paste a picture into the correct signature - it never stays.

  any suggestions are welcome.

  most up to date OS and and on iOS 9.2.1

  The image format must be PNG. Is that what you use?

• How to remove search 10 iMessage iOS image history

  How does one remove the iOS 10 iMessage image search history?

  SEMs like nobody has an answer to this.

• problem iOS 9.3.4

  After installing the new update IOS 9.3.4 I have problem with my Iphone of 6 with the emoticon in Snapshat and Message. The application closes automatically or stay on the keyboard without possibility to send my message or I have to wait a long time before the keyboard appears. Do you have a solution? Is it possible to cancel update? Thank you for your help.

  Hello anneblc,

  Thank you for using communities Support from Apple. I know have a problem with emoticons, it's not what you expect. If I understand correctly, you cannot use Snapchat and Messages as usual, and sometimes the apps will be closed unexpectedly. Here is what I suggest to start solving your problem:

  1. begin by closing applications Snapchat and Messages from the view of multitasking, and this article is a visual guide for this process:

  Force a nearby application on your iPhone, iPad or iPod touch

  2. then restart your device under the tap down and starting process is important to keep the iOS software works correctly. Then retest your questions:

  Restart your iPhone, iPad or iPod touch

  See you soon!

• Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. Mozilla Heve problem with images?

  Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
  When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg

  whith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.

  any idea?

  Thank you

  Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
  Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do...

• What is the software problem IOS 9.3.2

  '9.3.2 IOS' I always get the message following 'a problem occurred with this Web page, so it has been reloaded' and however took place at the closing of the Web page. This problem occurred after upgrading to IOS 9.3.2.

  How to return to the previous 9.2 IOS to check if it's the software problem or something else

  You can't go back to iOS 9.2, Apple does not support without decommissioning.

  Problems of Web pages can be caused by many reasons, and not all associated with iOS. Have you gone to settings > Safari and clear the history and data from the Web site? Also, what happens to all Web sites, or just a select little? Have what troubleshooting you tried? Standard user troubleshooting includes reboot, reset, restore from backup, restore to factory; tests after each stage.

  I use iOS 9.3.2 on many devices and have no issues with Safari and Web sites.

• Problems with image capture.

  Anyone has this problem. When I connect my iPhone 5 to my macbook and use Image Capture to transfer photos image capture will sometimes see not all the photos. Ex I have 25Photos on the phone, but only sees the image capture 20. The other 5 are displayed.

  Several other similar reports here. No solution.

  If your workflow allows it, use my photo stream to sync your iPhone to your computer. Seems to work more reliably than the manual method.

• iPad pro problem showing images video and Youtube eBay

  Hi all

  I have a strange problem with my iPad pro (and before that with the iPad 1 air).

  Installation program:

  • Telekom VDSL 50, Telekom Speedport W724V
  • 2 WLAN Range Extenders (1 Telekom, 1 Devolo)
  • iPad Pro and before the Air1 iPad with problem
  • iPhone 6 s more, iPad 2 Air without problem
  • peripheral and peripheral issues no problem have the same WLAN settings
  • everything on the same level of iOS
  • no problem with cell phone, Wifi only!

  Affected applications:

  YouTube and eBay Apps

  problem also occurs when you access related Web sites via iOS Safari, but less frequent

  Problem:

  Applications have problems to load media files (pictures and videos). After a while, network errors occur und sites can no longer be reached.

  Seems it to come in different severities: sometimes I solve the problem by turning WLAN off and back on. Sometimes to renew the lease from network works. Sometimes, I need to turn the iPad and turn it back on. Any action is temporary, the problem reoccur, and more I use the sites, the shorter the time before the problem came back again.

  Does anyone have the same problem? Any ideas or solutions?

  Thank you very much

  I have a similar problem, but only when I am connected to my Wifi extender (via the Powerline) devolo. As soon as I connect to my router directly, the problem disappeared.

  In my view, the problem is caused because recent versions of IoS are more compatible with the Devolo WiFi extender.

  No idea how to fix?

• Problems reading images and sounds DVD satellite A110-276

  A couple of months my Equium A110-276 has stopped playing DVD correctly.

  The sounds and images on the DVD are slow, sometimes jump and are generally not synchronized.
  I downloaded the latest drivers, but it made no difference. If I stream a youtube video for example the image and the sound are both very good.

  Everyone think of something I can do about it?

  Thank you

  Siobhan

  Hello

  If the video stream seems ok so everything seems to be ok with the graphics card.

  I think that either there is a problem with the CD/DVD driver or the software itself.

  I studied a bit in this forum and found this thread about a very similar problem:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24736&MessageID=92405

  Check the solution provided in this thread and your results.

  Best regards