Launch failed - Error Message

Similar Questions

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• Adobe reader 11 installation fails. error message: there is an error install adobe reader. Adobe

  Adobe reader 11 installation fails. error message: there is an error install adobe reader. Adobe reader installation error. NULL. tried to use the cleaning of adobe tool. using XP sp3. seems that adobe 11 is not completely uninstalled. It is because when the software adobe reader 11 is deleted in Add/Remove program. When the pc is restarted, 11 entry of adobe reader returns but it's like the fake entry as not given the size. Please help to correctly install Adobe Reader 11.  also tried:

  1 uninstalled, rebooted, reinstalled 2. installed from different locations, 3. deleted adobe keys of

  local machine and tried to install

  You also have Acrobat installed?  Acrobat is the creation of PDF files and Adobe editing tool.

  Have you tried Microsoft Fixit tool?

• -"FsUsbExService failed" error message.

  I recently started getting this message "Failed FsUsbExService".

  what it means and what to do about it?

  Hello.

  Yes, the message appears at startup.

  Strangely, he began to arrive about a week ago.

  I have a toshiba satellite pro L550, took about 18 months.

  I have new samsung pc studio installed [my cell phone is the samsung galaxy s2] but this has been installed since I have this laptop.

  Why would begin to create the error message that I started to receive?

  THX

  Hello

  The process or service FsUsbExService belongs to Samsung New PC Studio or Samsung Kies. Please try to re - install all the applications above and check if the problem persists.
  
  If you don't want to re - install, please try the following tips to avoid this error in the future
  [1] method: Utility of Microsoft using Configuration to disable startup no items desired
  
  
  • On the start menu, insert the following text in the search box and press ENTER: msconfig
  • From the top, select the Startup tab
  • Remove the control from any item you do not want to start with Windows and click apply
  • From the top, select the Services tab
  • Check hide all Microsoft Services and remove control of any item that you do not want to start with Windows.
  • Click OK
  Thank you
  I hope this helps :)

• "Download failed" error message when you try to use the tab create in Expert mode)

  I use PS 11 elements and following a tutorial that instructed me to click on the tab to create, and then select the Photo book in option (in fact, it does not matter which option - they all produce the same error message).

  I get the initial dialogue, to set the number of pages, etc., but when I click on OK, a window opens saying "active download, please wait". This is followed by an error message "failed download. The server is not available or you are not connected to internet"or words to that effect.

  So far I have checked the software for updates, checked my internet connection and looked into this forum to find answers, but so far nothing has worked.

  Anyone else experienced this?

  I think I can solved the problem by renaming a file (which may have had has been corrupted?).

  Here's what I did:

  "I renamed the file" "MediaDatabase.db3" to "OLD MediaDatabase.db3 ' Library\Application Support\Adobe\Photoshop Elements\11.0\Locale\En_US. restart PSE11 folder and clicked on create, using the default value for an object (A place of Sarcelles) and - after a slight pause while the catalog has been rebuilt - it worked! (previously he had not). Tested with other themes and they were all OK too.

  NB: the path of the file above is on an Apple Mac running OS X Lion mountain - he peut vary between versions of Mac OS X and will certainly be different on a Windows PC (see the post of Surendra, above, for a suggestion of where to start).

• Mini 101NR - restore to fail, error message "cannot find the file.

  While restoring my Mini 1010NR with 8 GB SSD from the disk of XP SP3 operating system, everything fine until partially through the recovery an error message saying that it cannot find the i386\ASMS file.

  I tried the options "install fresh copy" and "repair" and get this same error message in both directions.

  I formatted the SDS with both regular and quick NTFS file system. My OSD software gives me the possibility of formatting of the SDS with fat? I have not tried. That I should?

  I looked at the CD, and in the i386 subdirectory, I see a subdirectory called ASMS. I see several subdirectories in this directory.

  I am booting from an external CD/DVD drive. This seems correct, as the installed much restoration program file until stopping in the message saying that it couldn't find the file ASMS.

  This OSD provided with the computer when I bought it new at HP.

  Thank you

  Peter

  The cd is corrupted or damaged or installation loses communication with the CD-ROM drive. If you can, try another cdrom drive.

  http://support.Microsoft.com/kb/q311755/

• Canon MP620 install launches the error message "Could not load any file of resource".

  I reinstalled Windows XP on a fresh partition a few days previously.  I applied SP3 and all updates of windows until no updates are available.  I applied the motherboard and video drivers & s/w.  Windows updates applied an update to the CPU driver, if I'm not mistaken.  I didn't have many other things still installed at this point beyond Panda, office and a few utilities simple, affluent (Notepad ++, Total Commander, etc - things without installs pretty simple).

  When I try to install the printer driver Canon MP620 (md8l-victory-mp620-1_04 - ea24a.exe, for use on local network), after the one the switch over and half dozen clicks later software is about to install but then get the following error:

  INSTALLATION PROGRAM. EXE

  Unable to load a resource file.

  I contacted Canon support.  Not surprisingly, they said it wasn't their problem and that my system was to blame.  To be honest, I was able to run the same configuration file, without getting that error, on another machine.

  ... Any other relevant details of the _potentially_...

  I already had a problem with es.dll (do not have the details on me).  I got an error message (twice) which suggests that it might be corrupted, so I ran sfc/scannow.  After clicking on several attempts on my original Windows XP disc in the analysis, it finally finished without reporting problems or corrective action.  Never seen the error once again since.

  ... then...

  I can't find all the other tracks on the internet that take me somewhere.  I used to be quite a geek, but I think that I'm not dumber as I get older.  Without a solution, I can't use this printer.  I need to use it as both a printer and a scanner, so I would use Canon software provided.  Can anyone suggest it please what else I should try?

  Other details which may be relevant:

  -Windows XP Professional Service Pack 3 (build 2600); the system is up to date with windows updates

  -You try to run md8l-victory-mp620-1_04 - ea24a.exe (network for printer Canon MP620 multifunction driver) downloaded fromhttp://www.canon.ca/inetCA/serviceDetail?m=load&id=5&sid=27&mid=0002200452&type=D&opt=1

  -I have not found a driver for Canon in the 'Add printer' wizard standard who recognized the printer.

  Hello

  ·        What version of the XP operating system do you use? 32-bit or 64-bit?

  I suggest trying to install the printer using the wizard for adding and deleting printer and check if you are able to install the printer on the system or not.

  What Add Printer Wizard does not complete the installation of your printer

  http://support.Microsoft.com/kb/823447

  It could be that an application is in conflict with the installer. I suggest to perform a clean boot on the system, then try to load the drivers from the printer and check if the problem is resolved.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: I suggest you uninstall the drivers that are already present on the system and the installation of new drivers on the system from the link below.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp620#DriversAndSoftware

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Procedure launches the error message

  Hello Experts!
  
  I need you people help a new. I am creating a procedure that will have the service as an input parameter id. Based on department id, select a table row. It sounds simple enough, but I don't know why I'm having a warning message when I compile it.
  
  Here is the warning message
  WARNING: the execution is completed with warning
  PROCEDURE get_department_2 (Compiled dept_id.
  
  Here is my code
  create or replace PROCEDURE get_department_2 (dept_id in VARCHAR2 (6))
  is dept_rec % rowtype departments
  Start
  Select * into dept_rec
  ministries
  where department_id = dept_id;
  end;
  
  
  Now, when I call this procedure, I get the following error message
  Error report:
  ORA-06550: line 5, column 5:
  PLS-00905: object EDM20. GET_DEPARTMENT_2 is not valid
  ORA-06550: line 5, column 5:
  PL/SQL: Statement ignored
  06550 00000 - "line %s, column % s:\n%s".
  * Cause: Usually a PL/SQL compilation error.
  * Action:
  
  
  Here is my code
  Set serveroutput on
  declare
  v_dept_id VARCHAR2 (6);
  Start
  v_dept_id: = 10;
  get_department_2 (v_dept_id);
  end;
  
  Can someone tell me what wrong?
  
  Thanks for your help

  Hello
  It was what wrong with your procedure

  create or replace PROCEDURE get_department_2 (dept_id in VARCHAR2 (6))--> isn't varchar2 (6)
  is dept_rec % rowtype departments--> *; is not present and is not straight *.
  Here's the correct syntax

   CREATE OR REPLACE PROCEDURE get_department_2 (dept_id IN varchar2)
  AS
     dept_rec   departments%ROWTYPE;
  BEGIN
     SELECT *
     INTO dept_rec
     FROM departments
     WHERE department_id = dept_id;
  END;
  

  Concerning

  Published by: OrionNet on February 25, 2009 16:53

• Install HP Photosmart B210 fails (network) - "Printer Installation Failed" error messages

  Hi - I have a HP Pavilion Elite HPE on a home network with a wireless HP Photosmart B210 printer/scanner.  This configuration has worked for > 1.5 years, then about 2 weeks ago, I could not print from any application.  Win7 would post "cannot communicate with the printer.  Here's what I did:

  (1) uninstalled - reinstalled driver SW repeatedly - however, Win7 messages "Failed installation of the printer" at the end of the installation.

  (2) the HP print and scan doctor finds the printer wireless-, but can find no defects or problems. All green checkmarks

  (3) I copied/pasted the address of Web page in IE - in the Home tab's built-in Web server it States "system error - network connection error.

  (4) scanning works fine wirelessly and if I connect the printer via a USB cable - I can print.

  (5) I have a Lenovo and Ipad desktop computer on my network that impressions wireless - so, seems, the issue is with the Elite HPE only and not the router.

  (6) if I'm in Excel and select search for printer - I get the error "domain services active directory are currently unavailable.

  (7) I checked the printer spooler and it is started and set to automatic.

  I want to keep the ability to print wireless, however, if I can't solve this problem, I have to constantly connect via a USB port.  Any suggestions on what is wrong?  Thank you, Rob

  Hi Erico,

  Thanks for the reply.  I ran the "sfc/scannow" command from the line CMD (run as administrator) - completed without finding any breach of integrity.  I reinstalled SW from HP (PSB210_Basic_x64_231.exe) and installed without problem.  I was able to print a test page and a spreadsheet excel via the wireless network.

  It seems that this problem is solved.  Thank you for your help.

  Kind regards

  Bob has.

• All-in-one HP Photosmart C309a "Alignment failed" error message even after cleaning the print heads, etc.

  About 3 weeks ago before making the error msg above, a large black ink blob appeared on my printed piece of paper.  This product for several sheets later, but kept decreasing in amount.  I continued to print & finally all traces of ink have disappeared.  2 days ago I got a msg of error on "load plain white paper. ", but the paper tray was plain white paper in it.  I have removed the paper, straightened and her successor. As a result, the msg "Alignment failed" appeared.  I went through all the steps HP online information on the treatment of the "alignment failed", including the cleaning of the printheads (the right amount of ink was on it), check the vents of cartridge, etc.  My question is: if I have 4 out of colored inks and a new black ink installed, the alignment is being affected by the old cartridges?  A msg on this appeared on the Control Panel, giving the opportunity to proceed with the old cartridges or install new ones, but be careful that it "cannot allow completion of...» "If 'old' were replaced not.  I need to replace these color cartridges or is it probably another problem, which is print head damaged?

  Checked the evacuation & there is no problem, so I tried the informal solution to put the printhead in hot water.  A ran 1 cleaning via / configuration on the printer and finally aligned with success tools.  I waited a while to respond because I wanted to see if the printer should continue to work, and there!

  Thank you very much.  I'm happy that I can keep this printer!

• Operation failed. Validation of the backup task execution failed error message on startp

  Title: backup original validation task execution failed

  Receive message at next startup:

  Operation failed. Backup validation task execution failed. Description: Description of the scene see log operation for more details.

  I looked at the log of the operation and there were entries for each occurrence. Unable to determine anything else.

  Hi BobBianconi,

  (1) since when are you facing this problem?

  (2) what backup program do you use?

  It seems that you use non-Microsoft backup software. If this is true, you can check with the provider of software for known problems.

  The following steps can worth a try:

  Method 1: Run the fixit available in the link below for common system maintenance tasks.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  
  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  
  Method 2: activate the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• After installation, the program starts to open, then fails (error message from windows). Why?

  I installed the program normally. The icons are on the screen, but when I try to start, it starts to run, then fails because of windows. Windows does not have the error.

  reset your preferences-

  Acrobat: https://forums.adobe.com/thread/1595848?start=0&tstart=0

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  hearing: https://forums.adobe.com/thread/1079494

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InCopy: https://forums.adobe.com/thread/526990

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

• 19\installer_msi_win.msi RarSFX failed error message:

  I receive a notice of default with this title. How can I fix the problem. The title is

  "C:\Users\...\Temp\RarSFX 19\installer_msi_win.msi".

  and the message says:

  "Windows cannot access the specified device, path or file. May not permissions to access you the item.

  I am the normal user of this PC and have full access to all areas, but get this message and will not go away.

  Hello

  1. don't you make changes to your computer, after which the issue started?
  2. it happens when you try to unpack the game?

  Appropriating the file and check if the problem persists.

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

  If it's a Rar file, right-click on the file and extract to a specific location.

• Media Center Guide fails to download since switching from Vista to Windows 7 Home Premium. Downloads fail error messages about invalid security token. After you enter the postal code in the installer, I am not prompted to choose a cable provider I was w

  With Windows 7, I get stations but Guide cannot download lists.
  Media Center of Vista had worked correctly before the upgrade.
  I have the analog and digital tuners on one card and use the cable (Comcast) analog and digital antenna.
  Since Windows 7, I am not prompted to select a cable company after entering the postal code in the installer.
  I tried other suggestions on this site and nothing worked.

  Hello Daysailer,

  Thanks for posting on the Microsoft answers Forum.

  I recommend you post at thegreenbutton.com.

  It is a sponsored Microsoft Web site and they have users who are very experienced in internet TV and other issues WMC.
  Please click here to ask your questions.

  They will be happy to help you.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• [windows 7] Pixel Bender accident on launch without error message, works only in mode 256 colors

  I recently installed Pixel Bender and it worked the first time I started it, but I've since updated my NVidia driver, and now it crashes at startup.

  I tried to change the program setting in the NVidia Control Panel and tried all options of compatibility, but also 16-bit color, but it does that mode 256 colors, as suggested by this old thread:

  mode 256 colors makes it impossible to view any kind of basic shaders so I have to export flash develop at each change.

  Device Manager does no fallback option, and my computer is in dire need this update, I'm stuck.

  Hello

  To resolve this problem simply change the name of the sniffer_gpu.exe file in the Pixel Bender Toolkit folder to any other without ".exe" for example sniffer_gpu.exe.bak. This will stop this toolkit to get a GPU that can be incompatible with app (see manual for supported GPUS) and forces CPU usage to make images.