Lenovo G770 - Installation of Win 7 problems

Similar Questions

• Lenovo x100e with 7 wins internet problems

  Hi all

  I use a brand new lenovo X100e - operating system is Windows 7 32 bit.

  I am able to connect to the wifi and my wired connection appears such that detected and yet I am unable to connect to IE8 or IE9 update.

  I know that wireless and wired works that I am able to do the windows updates, java updates etc etc - but just unable to load IE 9, typical page cannot be displayed.

  I tried this laptop on wifi hotspots, different routers... which connect but still no internet.

  Anyone able to suggest anything as ive been trying to solve this problem for weeks?

  See you soon

  Matt

  
  

• Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

  Hello!
  I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
  I do the following:

  1. install Windows 7 x 64 SP1.
  2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
  3. install all updates of Microsoft Windows
  4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

  Here is the log for the first test (win7update.log) file:

  12\28\2011 update started at 21:11
  TVALZ_O.inf installed
  E/s installed & memory access driver
  driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
  util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
  Updated at 21:29

  After the restart I've run it again and the result is:

  12\28\2011 update started at 21:38
  Toshiba Bluetooth stack has already been installed.
  Toshiba value added package has already been installed.
  Updated at 21:40

  Any help is appreciated!
  Thanks in advance!

  Stand by.
  What are you doing exactly?
  You try to install own OS?

• Graphics driver problem Lenovo G770

  Hello

  I recently bought a new Lenovo G770 computer and after some time began to experience problems with the ATI display driver who kept sparking blue screens (BSOD) and black screen crashes with the well-known message "the ATI display driver has stopped working and has successfully recovered". My system is the CORE i5, 8 GB RAM, 750 GB HARD drive and double version graphic (ATI Radeon HD 6650 M and Intel 3000). I have the latest drivers from the Lenovo support site, the question "do you have the latest version of the driver" is useless. The latest driver for the ATI Radeon of Lenovo is one dated April 15, 2011! Has anyone encountered this problem? I'm not really willing to Exchange my laptop or sending it to the service without a little research and DIY. Thus, everyone, Lenovo, HELP? Much appreciated!

  Thank you!

  
  

• Installation of Win Server 2012 9 desktop problems

  I have a 64 bit Windows 7 with 9 Workstation installed host computer.

  I am trying to create a virtual machine for Win Server 2012, but I get a license error.  There are other posts on this topic, but it relates to the work station 8.  I tried the solutions in these messages, but I still have a problem.

  I downloaded the ISO file using Internet Explorer twice.  Once I used the ISO to create the virtual machine and once I burned the ISO to a DVD and tried.  It always gives me this error when installing:

  "Windows cannot find the Microsoft software license agreement.  Make sure that the installation sources are valid, and restart the installation. »

  The problem is that I tried the installation of 5-6 times and I can't spend.

  All the world did this with success?

  Thank you

  Stem

  Try this:
  When you create a new virtual machine
  -Choose the option: I'm going to install the operating system later. (The virtual machine will be created with a blank hard drive.)

  Do not type the path to the ISO file

  -After the creation of new virtual machine also set the path to the ISO file (VM / parameters / CD-DVD.../Use ISO image file)
  -After the execution of the new VM to install automatically saved (if not run probably on purpose = error)

• My original OS 7 Home Basic Edition (purchased): problem of Installation of Win 10

  Windows has AUTOMATICALLY upgraded to Win Ultimate who, as the replies received from your good end, has been described as false.

  To date, I had downloaded (free) Win 10, but when installing, I received a msg stating putting touches of the original VER of Win 7 Home Basic Edition (which I bought) and then click Refresh.

  Please notify: (a) I would require to REINSTALL my house 7 the CD database (since upgraded Ultimate is false since it was produced Acer OEM - SLP Win 7 Ultimate, and mine is customer built Gigabyte motherboard) before Win 10 could be installed.

  (b) if I didn't need to REINSTALL WIN 7 Home Basic, then how and where to insert the product keys (for Win 7 home basic) to allow the installation of win 10?

  Windows 7 can not auto-level to a ultimate edition. He must intentionally upgraded or a non-genuine Windows 7 Ultimate product key has been used for the Express upgrade.

  Your best option is to reinstall Home Basic, reactivate and then upgrade.

  Or, if you have basic Windows 7 Home Edition product key, you can use it to perform a new installation:

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

  Resources:

  How to download official Windows 10 ISO files

  How to: perform a clean installation of Windows 10

• Question about the installation of Win XP on Satellite Pro P200

  Hello

  I have a lot of problems with Vista. First it took me a week to install my printer WiFi. (sollution: install local lpt1 as the printer, change port properties en gives a location network (computer/printername).)
  Last problem: vista give no right to copy my USB hd protable with xp files.

  Finally, I lost all hope and want to go back to xp.

  Is there anyone with experience in the installation of win xp on this laptop. And is it possible to tell me the steps that you have been taken to do so.
  Are there concerns as none have some drivers, things that do not work or problems with sata hd.

  Thank you

  Luke

  Hello

  It's a difficult topic-> XP on Vista machines.

  First: Yes, you can install XP on it because all the important factors are available (VGA, SATA, wireless, XP BIOS, BLUETOOTH) and that should be enough.

  Because your computer has a BIOS for Vista (I guess there a) Please install the BIOS XP first and then start the installation of XP. In the case that your HARD drive is not recognized then you need to install the SATA driver during the installation of windows XP. The procedure is described in the statement of the Satellite L40-> XP installation, so if you want to install and problems SATA (HDD, not during the XP installation), you must check the installation instructions for Windows XP for a SATELLITE L40!

  If you have additional questions, I recommend allows you to place your question here before doing something that may stop your nerves later. :)

  Welcome them

• Qosmio F20-141 - cannot start the installation of Win XP PRO SP2.

  Failed to start installation of Win XP PRO SP2.

  After click on "Start of the CD" I can see for a short time only from message ~ "Install from XP Wisdows" (small white letters at the top of the black screen)

  After this computer hungs in black screen.

  QOSMIO F20-141 for the Federation of Russia
  M/N: PQF20E-02801YRU

  Hello

  Have you used the Toshiba Recovery CD or did you install the operating system from the original CD of Win XP?
  As far as I know the recovery procedure is very easy to use and it should work without any problems.

  Good bye

• During the installation of Win - xp pro vmware error 10 as mentioned below

  During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

  I think you'd have better luck if you go to the website of VMware support.

  http://www.VMware.com/support.html

• Trying to regenerate my installation of WIN 8

  I am trying to update my installation of WIN 8. I have problems of pilot (optical drive and virtual disks) and I hope that this will help with.

  When I try to WIN 8, it says that some files are missing, and I need to insert my media. It is a download and I have no disc to be inserted.
  When I try to run the original downloaded file (Windows8 - Setup.exe), she prays for my product key. When I give him the key, it tells me that the key is an upgrade, and I can't move forward.
  What I have going on here?

  Thank you, Mary Therese K... With the help of another forum, I managed to get a new product code. With that, I used my previously downloaded file to renew my program to WIN 8. By doing this I have now all my back drivers where they belong and everything seems to be fine.

• Installation of Win 7 RC on HP Pavilion DV6-1130sa

  I have the following questions regarding the installation of Win 7. The disc is currently containing the Vista partition and the recovery partition. I want to install then I 7 RC as a new installation on drive C with the possibility to go back to Vista if you need and have the laptop works on the original factory configuration.

  (1) if I do a fresh install of Windows 7 on the hard drive with Vista Home pre. 32 bits (including the recovery partition), the recovery partition will stop working (IE from the trunk F11 option included)?

  (2) if the recovery partition does not work afterwards, if I use my restore dvd copy I ve created, it will create the restore disk partition hard like it was form the factory? and let me go back to vista home Prem

  Please let me know if there is anyone out there who have tried the above with their HP laptops.

  Thank you for your time to help me.

  Ruwsoft

  Hello

  First make the Vista backup. How all the information here.

  (1) If you leave parition your recovery there is work.

  (2) so it does not restore partition, it will automatically recover your system.

  You might also be interested in dual boot.

  This way you will have the possibility to use the two system on a laptop computer.

  How dual boot Windows Vista and Windows 7 (Vista installed first) information here

• For Lenovo G770 SATA drive

  Hello

  I'm looking for a new SATA drive for my Lenovo G770. previously, 750GB HD, I had, but he corrupted me and now looking for a new.

  all brands better with Lenovo G770?

  Concerning

  Aqib

  Hi Wendy,.

  The G770-compatible HARD drive is 750 GB 250 GB and here is the link to the datasheet for any upgrade of information:

  • Lenovo G770 Datasheet

  Publish us back for other queries.

  Best regards

  Shiva Kumar

• Error: "SQLDUMPER library failed initialization.your installation is either corrupt or has been tampered with please uninstall then re run the installer to correct this problem.

  Original title: "SQLDUMPER.

  When I start my laptop windows xp, an error message appears "SQLDUMPER library failed initialization.your installation is either corrupt or has been tampered with please uninstall then re run the installer to correct this problem.

  Hi mark25666,
   
  Here's a similar post on this issue. Check the suggestion given in the link and see if it helps you too the question of fixing.
  Should what site I go to install SQLDumper Library?
   
  If this is not enough, post your query in the SQL Server instances for better assistance.

• How to reset a laptop Lenovo G770 back to factory settings?

  I try to get rid of my old laptop Lenovo G770 and want to clean everything first to wipe it.  It is out of warranty so Lenovo will not help without asking me a lot of money to get a new warranty.  I want to just reset the factory settings with the fact that he came, and I don't have the original disks.  Can someone help me with this?

  Thank you

  https://support.Lenovo.com/us/en/videos/ht051298

  LenovoG770 V1.0 user's Guide

• BSOD after fresh installation of Win 7, failure of page in the nonpaged area. Win 7 will not install

  A day at the start of a program on my computer that I used for years without incident, the computer suddenly fell down, restarted, and I got the infinite loop of system repair. No change in hardware/software, don't know if a recent Windows Update has been installed. Once again, CPU, mobo, Vid, RAM are the same for the past 4 years.

  After much frustration, I decided to just reinstall Win 7. So I deleted my partition, re-created a new partition and installed Win 7

  In the last step of the process of installing Win 7, it says Setup cannot complete. It is then stuck in a loop of reboot with a BSOD page fault in non paged area.

  I tried F8 on startup and choose Safe mode, but then he says that the installer cannot boot mode safe because the installation of Win 7 did not finish.

  I tried to reinstall Win7 by removing the disc again, but I get the same results.

  What can I do?

  HI - finally got the job. I had the computer to use only the GPU on board BIOS and was able to install. Somehow the graphics driver conflict when Windows is first installed and it kept crashing.

  Thanks for your help.