Lenovo ideacentre AIO 700 mouse jump, screens acting weird and closing randomly

Similar Questions

• IdeaCentre AIO 700 - BIOS update error 0162

  Hello

  I have a Lenovo ideacentre AIO 700.

  I tried to update the BIOS of O1KTT30AUS to the most recent available on the pilot product page and the software that is listed as O1KKT35A.

  Now when I start up I get an error message from American Megatrends saying error 0162: configuration data integrity check failed.

  It displays two options:

  Press F1 for Setup

  Press F2 to resume.

  The PC restarts, and then Windows loads OK, but this process repeats whenever I reset my PC.

  In the application of configuration of Lenovo, it shows my BIOS as still being O1KTT30AUS.

  Any help on how to solve this receipt with gratitude!

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  My apologies - she always checks to correctly read the insutrcitions

  It is said to enter the configuration and press F10 to save on the Lenovo Web site.

• screen goes black and moves randomly please explain answer in detail as I use windows 10 and I can not understand the answers already given

  screen turns black and moves randomly when using most of the tools of photoshop.  I use windows 10 and cannot follow the above.

  Hi Nodstown,

  Greetings.

  • What version of PS do you use?
  • Mac or Windows, which version?
  • There may be several reasons for this.
    • Preferences corrupt.
    • Obsolete graphics drivers.
  • Solution
    • Try resetting the PS tools. (See screenshot)
    • Try resetting the PS preferences - to restore preferences quickly by using a keyboard shortcut: press and hold Alt + Ctrl + Shift (Windows) or Option + command + shift (Mac OS) when you start Photoshop. You are prompted to delete the current settings.
  • • Update graphics card drivers
    • AMD - AMD Catalyst 15.10 Beta Driver for Windows
    • NVIDIA - drivers | GeForce
  • Also, try opening the PS, then go to preferences - performance and uncheck CPU chart use
  • Now, restart PS and then try to use tools again.

  

  Concerning

  Rohit

• IdeaCentre AIO 700 - selection of graphics cards

  Hey guys,.

  When you browse the Details of the driver through Windows screen, I see that the active graphics card is the Intel onboard. Impossible to find a way to disable the onboard via Bios and force the machine to run with the discrete Nvidia card (which is indicated be fully operational by the test of the equipment program). Is it functioning?

  If so, does this mean that, behind the scenes, the system uses the two?

  THX.

  It took me a while to understand as well. Open the right icon NVIDIA GPU NVIDIA Control Panel in the system tray (or find it via a search of Cortana). Click on manage 3D settings. You will see two tabs. Will allow for the global default to the NVIDIA GPU settings if you wish. By default, it selects based on the currently running program. The other tab allows you to set parameters programmatically. I don't know if there is any advantage to using the Intel GPU ever. If anyone knows, I would be grateful this info.

• Mouse clicks does not: hyperlinks and closing tabs requires several clicks

  When I click the icon 'x' to close a tab tab will not close. After clicking on a second, or sometimes the third time, the tab will close. Same thing with hyperlinks. In addition, Firefox seems slow and sluggish.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• AIO 700 24ISH HDMI TO HDMI LG TV

  Hi all I am a new owner of an IDEACENTRE AIO 700 24ISH.

  What I used to do is connect laptop I had using cord to female connector hdmi etc etc movies streaming on my 50 inch TV. I did display high tour strings/clone, then only show on TV witch if off top of Tower, so then basically my TV was my monitor cut short drrr. Anyway when I try this on my lenovo IDEACENTRE AIO 700 24ISH. THE RESOLUTION WON'T WHEN I GO TO THE SHOW ON TV ONLY. Every GREAT THING of GOING. my crazy case dear Magach. What I can do is to clone the screen resolution, but then I am unable to turn off the monitor of lenovo. But the tv shows like the lenovo. but I have 2 screens on. Who is destraction and not nice viewing. Also if I listen to a movie and its projection on both tv and lenovo monitor screen. The film won't strem properly, or not at all. Also if I keep up with the huge icons and the taskbar and zoom in to the proper resolution on the internet. The movie will not play again and it is in the only exhibition tv with no lenovo monitor screen on. But if I switch back to ideacentre only every thing is ok. I also tried re my laptop computer and that always works either mode and plays perfectly. So for me there is something on the hdmi to the tv connection. So what I'm trying to achieve is to use my tv as a monitor in simple terms, but in detail above if it makes no sense. Thank you all for reading my Virgin post here. Looking forward to hearing cheers Wayne.

  UPDATE I went to intel and used their update utility and got the latest graphics driver. So I am now able to play streaming of movies but the best configuration for use in Panel of intel. check use application settings. When I turn on the TV now, I get always a big task and icons bar but the correct zoom on the internet and how it works. But beware, play with the same parameters as its still a bit unstable. but playback / pause seem ok. So, anyone having this problem maybe be able to find a direct solution through updates from intel. I geuss it will improove over time with updates and I will buy the latest version of HDMI cables. The laws have changed even on them as to what can be written on the packaging and the standard to be sold. Wayne has soon

• mouse acts weird on Windows 10 when it is connected to the monitor extern

  Hello

  I have a weird problem, when I connect my macbook pro to an external monitor. I am running Windows 10 Pro. The problem only occurs when I close the lid of the laptop. The mouse starts to act up, it applies random clicks. Have more strange is that it stops after 5 minutes or so do. However, if the cover is open and I'm working on two screens, then it is normally.

  Do you have an idea where to start go if I want to solve this problem?

  Thank you!

  You should probably ask at the Microsoft support site.

• HOW IS IT MY MOUSE JUMPS AROUND ON THE SCREEN, OR STOP SUDDENLY

  my mouse jumps all over the screen, and it suddenly stops moving.

  Test your mouse on another PC. If the problem persists, the mouse is defective.

  Test another (known working) mouse on your PC, if the fault persists your PC is faulty somehow.

  It's a mouse laser (light rather than a rolling ball works)? If it is try different a surface or a mouse pad. Some surfaces, e.g. mouse pads and mousepad hologram photo will lead crazy optical mice.

  If it is a bearing ball mouse, clean the rollers inside.

  It is USB, PS/2 or series? Wired or wireless? Check the battery if wireless.

  TRicky

• How to activate the touch screen on a series of Lenovo IdeaCentre K450

  I recently bought the office series Lenovo IdeaCentre K450 and touchscreen Lenovo said that it is compatible with windows 8. It is the office that is not compatible with the monitor, or do I have to install a driver?

  Hello

  Check with Lenovo support, their drivers and documentation online and ask for their
  Forums about known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  Touch and pen settings: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-8/touch-pen-settings-frequently-asked-questions

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Mouse jumps randomly Sony all in one desktop computer

  My mouse jumps randomly I'll do anything on the computer. I had to reload windows and he started jumping around just a bit, now it does on every 10 seconds. My computer is usless and it is only 2 years old. I've tried everything. Change the sensitivity of my mouse, turn off my desktop touch screen, new mouse, get new drivers. Nothing works!

  Does while surfing on the internet by typing in a Word document. I searched for a fix for about 8 months and no one can tell me what is happening.

  It takes at Best buy, they can't help, which was $ 100. Then it took for Ribbit they could not help. They tell me that it is a Microsoft Windows problem and communicate with them. They had quite a few computers arrive with the same problems. So now I ask Microsoft to help and out a fix for Millon of dissatisfied customers.  It cannot be the computer because everyone having this problem is not the computer some. This problem is not discriminatory against what system you have HP, Dell, Sony, ASUS, Lenovo, Acer, Toshiba computer. The only thing we have in common is Windows.

  Please help with the annoying problem.

  Apple looking better and better every day. I'm tired of running alternative.

  By the way it took about 18 minutes to type this because of the mouse jumping around.

  I'm not a big fan of Norton, but there is nothing inherently wrong with it.  I myself just use the Microsoft antivirus because unlike Norton, he remains free forever and you will never have to pay for updates stay protected.

  If Norton's always keeps you and you are released, you probably have nothing to worry about and it is more likely the material needs repaired or replaced, for example detection touchscreen is default and causing false keys to detect. Perhaps the best thing that I could suggest is to contact Sony to see what they suggest.

  I had the same Sony Vaio, until a few weeks ago. Sold to a friend and now my only computer is a Surface.

• Satellite Pro 6100: cursor mouse jumps around

  The mouse internal nipple on my laptop does not work, it jumps around in all directions. I tried to replace that with a USB mouse that works fine except that I hit the space bar, then the cursor will jump on the side of the screen.

  It will then continue to scroll on the side of the screen, even if I bring him back. Looked at a lot of forums and it looks like a common fault but not a miracle.

  Help, please

  Hello

  I put t think that it s a common fault. It could just be the keyboard malfunctioned.
  One of my friends has a Tecra, and the cursor of the mouse jumped crazy on the screen.
  It was not possible or very difficult to open all the windows or click on the icons.

  The service provider has changed the entire keyboard and it's a solution.
  Perhaps you will also need a replacement.

  But what happens when allows you to disable the touchpad with FN + F9 function? Make cursor jumps when you use USB mouse?

• Wireless 4000 mouse causes screens will be jerky!

  I replaced my old mouse that stop working with a mobile mouse 4000 M/S wireless and whenever I'm in any open screen, the screen jump from top down.

  Hello

  Have you installed the latest version of IntelliPoint for the new mouse?

  Microsoft Hardware - downloads
  http://www.Microsoft.com/hardware/en-us/downloads

  There might be a problem with the mouse - it solve problems you can and if necessary contact
  supported.

  Wireless Mobile Mouse 4000 - has a 3 year warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=013&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ========================

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions. (This assumes that something is intefering with the mouse.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems). Norton/Symantec and other of these type programs are known to cause problems of
  with the mouse.

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The mouse jumping around corner on its own (TX2000 tablet PC)

  HP needs to fix or replace my HP TX2000. The mouse cursor keeps jumping to the bottom right of the screen on its own. I realized that there are a lot of heat generated in this corner of the basic reason keyboard, making it probably the mouse jump there. the mouse works perfectly when I rotate the screen of this corner, but lie, which makes it extremely difficult to work with the screen tilted in a different direction and the Del key BkSpace hiding behind the screen! Ofcuorse, this heat is the culprit and a strange design of unit fault!

  I had this same problem (although it seems a bit more sporadic than what others have experienced).

  The physical reason of the problem seems to be the corner of the base of the shelf RF interference; because the tablet takes the pen by measuring how much the emitted RF is altered by the pen, the interference near the corner must "look like" the pen being there.

  I have "confirmed" this by placing a piece of foil between the screen and the base (in the corner only); This removes the behavior of jumping.  Although I did not open my tablet, I suppose that the interference comes from the power of conditioning circuits for the processor?

  In regards to the Wacom HID "pen" disable the fix mentioned above: the feather still work like a pen (RF, with a fine location and pressure sensitivity), or it doesn't work like a 'finger' (capacitive touch sensor on screen, much coarser location resolution)?

• Windows 8 mouse jumps randomly to the upper left corner

  This is getting very frustrating. Mouse jumps randomly from any window I'm working in the top left corner of the screen. Example just typing this, it climbs to the upper left and I have to keep clicking back.

  It happens when the mouse/keyboard connected or not, tried to disable the touchpad.

  I even did a clean boot, but problem is, so do not think that there is a software conflict. It makes use of the very difficult computer.

  System W8 pro, i7

  Thank you

  To load and install this if you are a user of Vaio Duo 11, it solve my problem...

  http://www.n-trig.com/files/Sony_Win8.zip

• Brand new Lenovo Ideacentre Y700 not connect to a monitor

  Yesterday, I received the Lenovo Ideacentre Y700 but when I went to put in place, I found that no matter how I plugged the monitor, the monitor showed an error no signal. All the cables (HDMI and VGA) were brand-new and monitor. I've tried literally all of the ports on the thing. So, I don't know why it does not work. Can anyone help?

  Thanks for the reply, but I went to the store I bought it from today, they have latched on to one of them and it did not work while they exchanged it.