Lenovo WAN in Canada ROGERS/TELUS

Similar Questions

• BlackBerry Z30 how to restore the factory os after re - install 10.3.1.2243 via knowyou research Canada-Rogers?

  Hello

  I have a problem after re-installed os for my z30 via knowyou search Canada-rogers-z30 bone.

  I re - install the rest of this answer: http://supportforums.blackberry.com/t5/BlackBerry-Z30/Model-Blackberry-z30-charging-upto-60-only/td-...

  My problem:

  1 - my loss of phone Apps, frame, message, contact staff... when it restarted.

  2. it only loads up to 60% when running, but when stopping it can charge full (100%).

  Red led always blinks 3 - it.

  Please help me solve this problem.

  or tell me how to take back the factory OS.

  so thank you.

  Hi @dinhhv

  From the symptoms you describe, especially how any changes you make on your device are lost whenever you restart, run the tool in KB @sdgardne mentioned previously (pasted again below).

  KB36747 all data are deleted after a manual restart of smartphone BlackBerry 10 and has THE blue...

  After you run this tool, can you confirm if the tool says the patch has been applied, or no patch is necessary?

  If the hotfix has been applied, please reboot your device and let me know if the changes you made before you restart are kept.

• BlackBerry Smartphones Blackberry Bold 9700 for ORANGE bought in the UK, but never used does not work with TELSU SIM in the Canada

  I had a Blackberry Bold 9700 as a gift.  I think it was made for the Orange network in the United Kingdom ('Orange' written at the bottom of the BlackBerry in the front).  I tried to use it with my TELUS account in Canada with TELUS SIM.  The Blackberry does not register any wireless network signal.  The meter of signal display "SOS" only and no TELUS network is avaiable.  My position is Mississauga (Ontario) and Telus wireless covers this area for sure.  I checked that the device is not locked by going to Options-Advanced-online SIM card and typing MEPD Options Online.  The options that appear to say 'off '.  The device seems to read the SIM card because the SIM card # appears.

  Y at - it someone who has the same problem and its resolution.  A large part in this regard, the obligation for any input.

  Hello

  I just discovered the reason for BB does not not with TELUS that I wanted to inquire about registration CDMA you mentioned...

  A smart guy, he asked me to check the frequency bands that supports my BB.  Its sub Options => on.  "3 G bands" that supports my BB are 1, 4, and 8.  These correspond to the IMT 2100 MHz, AWS 1700 MHz and GSM 900 MHz respectively.  The frequencies that TELUS uses in the Canada are groups 1, 2, 5 and 6.

  So, finally tech TELUS came with the answer that my BB is designed to work with some UK frequencies and not with TELUS frequencies in the Canada.

  I've misunderstood and used the term incorrectly HARD LOCK.  The BB I have shows all the options as "disabled" when I go into options in advance-online SIM card and press the MEPD.  Also if I press MEP2 unit not asks me to input MEP codes.  Nothing happens.  This led me to believe that this device is not locked to ORANGE network so the lack of a better term, I used little HARD LOCKED.

  Much obliged for your entry.  It has been enlightening.  Thank you very much.

• both my laptop and desktop the same ISP, why and how can I fix

  Why does my computer laptop and desktop pc have the same Internet service provider and how to fix it

  Hello, your ISP is your Internet service provider.  It is Bell Canada, Rogers, Telnet, etc. of Telus.  Unless you want to have two companies providing your internet connection, you can not fix this.  Your IP address is also the same thing of having 1 service provider.  Your Internet provider assigns you an IP address.  Depending on the provider, if you unpluf your router, it may be renewed.  Other Windows 7 tips and tricks are available at: http://www.waltwachon.weebly.com

• New BlackBerry Q10 Q10 with defective keyboard

  I bought a new Q10 just 3 days ago. I started using the phone just yesterday after the crumbling of the SIM, to realize that the keyboard has 7 defective keys. I went to the store BlackBerry where I bought, and the guy said he'll send it to the centre and wait for them to go back. However, I told the store that I won't accept the same piece that was a defective lot. I need a cool room packed instead, the guy at the counter said that it will let me only know once BlackBerry back. Any suggestions what I have do, incase they intend to repair and restore me to the same device. Honestly, I don't want the same piece since it is a manufacturing defect or failure his name.

  Carriers have the ability to return a unit upgraded for you, be it your original device which is repaired or another similar. They are not required to exchange for a new one. My service provider to Canada, Rogers, will give a new device if a defective is returned within seven days, but it is their policy and nobody is obliged to follow suit.

  See you soon.

• Blackbery of blackBerry 8300 Smartphones does not start... have you tried everthing.

  Hello I have a 8300 BB that no longer works.  Its only about 5 months.  Thing is its an ATT phone and I'm here in canada, Rogers.  He's trying to start... think about it for a min flashes a red LED and then repeat ad nausem.  Ive endevoured to fix and even took a few phone repair places in the city.  Normally a telephone that new you would take with your provider and he would address the hardware failure but being his an ATT phone Rogers is of little use to me.

  Anyone know where I can send this phone to get fixed? Or am I on lunch here?  Troubleshooting as exhausted and we are pretty certain partners of his material.  IM willing to spend money to get it repaired.  Any ideas let me know.  Please and thanks in advance!

  Hi and welcome to the forums!

  He is a renowned recommended by several experts here store.

  Thank you

  Bifocals

  http://horizonwirelessonline.com/CAT/

• BlackBerry Smartphones has stopped receiving emails

  Anyone know what could cause this?

  I was getting them earlier today and then it sopped.

  I remember to have make us "service packs" to resolce cela some time ago, but I forgot the procedure.

  Could someone give me instructions simple on what & how?

  Thank you.

  Joey, there was a RIM data outage widespread this afternooon and continuing in tonight, now.

  He covered ATT, Verizon, Tmobile, Rogers, Telus and Sprint and others. It should be cleared soon, if all goes well.

  More info here:

  http://www.DataOutageNews.com/2009/09/09/bis-na-BlackBerry-com-down-on-9-9-2009/

• So Rogers, Canada, Iphone 5 s Rogers, Canada is unlocked if I reset it will re-lock

  I bought a Rogers, Canada, iphone unlocked online. If I reset it will be locked again.

  Hello

  Not if its been unlocked to work with other network providers

  IE lock code removed that how it will remain unlocked.

  See you soon

  Brian

• E120 Lenovo Edge - cannot detect the WAN of GOBI 2000 map

  Hi, I hope someone could help.  I bought an E120 that my country does not see the X120e

  I bought a card WWAN of GOBI 2000 dealer of Lenovo.  The card passes through the white list very well although it is not mentioned as one of the taken WWAN devices supported.

  I tried to install the 7xwc48ww.exe (drivers X120e and Edge 11 WAN) to see if it would work.  The GOBI loader installs, but the driver does not load, sense - in device - PORTS - Gobi charger Manager

  -In device - network adapters - No. Gobi WAN Card Manager

  I also tried the solution-http://curiouslynerdy.com/2009/05/qualcomm-gobi-wwan-card-on-windows-7/ , but still no joy.

  According to me, the X 120 and E120 are very similar, so I guess the Gobi WAN should be able to work.

  Can anyone suggest an alternative?

  Thank you very much!

  The E120 Edge is like the X121e GOBI 3000 or F5521gw will work. I tried a GOBI 2000 in my E120 with the same result as you.

• Smartphones blackBerry HOW to CHANGE "MY NUMBER" STORM 2 9550 UNLOCKED TELUS to ROGERS

  Hi, I have searched for a way to change "my number" in my unlocked telus storm 9550, on a verizon phone, you can enter # 000000, but it does not work on the telus software phones. does anyone know how to do this. ? Thank you

  I have a TELUS 2 9550 storm on the rogers network, had the same problem with the my number, tried using unicdma and hex, but it is only for older versions. I finally found "my number" changed, going on ebay and bought a SPC/MSL # for $ 8, tested and worked fine...

• An other 'Wifi without data plan"blackBerry smartphones Question - Rogers Canada

  Hey guys, I'm new to this forum and blackberries in general... Please bear with me.

  I am a student. Currently, I have a voice plan base on a LG Xenon with Rogers in the Canada. It includes minutes and unlimited texting. Enough for me.

  I am looking to buy a Blackberry Curve 3 G/9300 off someone. I just want to throw my SIM in there so I can use my normal plan with the phone. My understanding is that I can phone Rogers and tell them to block all data, if I get no charge on my Bill. Fine. However, I also understand that the 9300 is a wi - fi phone.

  Let's say that I get the 9300, contact Rogers and tell them to block all data on my plan.
  Can I still use my browser in a Wi - Fi hotspot? How should I do? (I know that I read somewhere that you need to configure to be about to access and not talkspot... If someone could help me with this that would be great).

  Also, I read that, so that I am still able to use a wi - fi connection, I need to have data 'on' in the phone. If the data is 'on' in the phone, but I've blocked data with Rogers, can I still use a wi - fi connection? This would prevent the costs of data on my Bill?

  In addition, I understand that I will not be able to receive multimedia messages without a data plan. Once again, if I'm in a wi - fi hotspot... Can I receive these messages from photos?

  I'm sure it's a question very well known and well hated to you all and I'm really sorry to ask, but I just need some clarification. I don't want to be stuck with a big Bill with I ever intend on paying data charges. If someone could help me with this, I would really appreciate it.

  Thank you very much!

  Stefanie

  stefspeaks wrote:

  Hey guys, I'm new to this forum and blackberries in general... Please bear with me.

  I am a student. Currently, I have a voice plan base on a LG Xenon with Rogers in the Canada. It includes minutes and unlimited texting. Enough for me.

  I am looking to buy a Blackberry Curve 3 G/9300 off someone. I just want to throw my SIM in there so I can use my normal plan with the phone. My understanding is that I can phone Rogers and tell them to block all data, if I get no charge on my Bill. Fine. However, I also understand that the 9300 is a wi - fi phone.

  Let's say that I get the 9300, contact Rogers and tell them to block all data on my plan.
  Can I still use my browser in a Wi - Fi hotspot? How should I do? (I know that I read somewhere that you have to configure it to be on the verge of access and not talkspot... If someone could help me with this that would be great.) Simply choose hot browser OEPM.

  KB16463 - how to change the default browser on a BlackBerry smartphone

   

  Also, I read that, so that I am still able to use a wi - fi connection, I need to have data 'on' in the phone. If the data is 'on' in the phone, but I've blocked data with Rogers, can I still use a wi - fi connection? This would prevent the costs of data on my Bill? Rogers could see your phone and charge you for a plan anyway. AT & T to do this, if you add in a smart phone with out telling them.

  In addition, I understand that I will not be able to receive multimedia messages without a data plan. Once again, if I'm in a wi - fi hotspot... Can I receive these messages from photos? No only simple navigation cannot be made and Pandora can be used in mode Wi - Fi.

  I'm sure it's a question very well known and well hated to you all and I'm really sorry to ask, but I just need some clarification. I don't want to be stuck with a big Bill with I ever intend on paying data charges. If someone could help me with this, I would really appreciate it.

  Thank you very much!

  Stefanie

• Transport CANADA share disks over WAN

  Hi, here is my setup:

  I have the DSL modem/router (cannot access the administration panel (ISP does not give) - so it must be in router mode acting without DHCP) hooked up to my no. 1-2 to time capsule (latest model, latest firmware 7.7.7 - in Bridge mode - acting as a dhcp server).

  My 2nd time capsule, also of 2 TB, latest firmware 7.6.7, is connected to the extended bridge ethernet mode (mode dhcp client) 1 St time capsule.

  I installed all the capsules of the time with the overall dynamic hostname and entered my apple for the CCMM ID (green light is on in the airport utility).

  Now the problem is when I connect to the external IP I can properly connect to the 1 St time capsule and browse files, backups, etc, but I can't connect to my 2nd time capsule of the external IP address.

  The two time capsules appear fine in the finder when I'm off the LAN, but it does not connect to a 2nd.

  What is the problem? Am I missing something?

  Part of the discs on WAN is not an option for me as I said I can't put no.1 Time Capsule in router mode due to my ISP give me admin for my DSL modem access.

  Thank you

  Your problem is that the two TC are on the same (your public WAN) IP address and the same ports, according to the standard CCMM. So the first TC in the chain is the one who gets the attention and captured the port.

  Apple didn't CCMM system able to cope with two of the devices themselves I guess.

  The usual way around this kind of thing is to use a different port. Unfortunately, Apple has hidden everything and so there is no way to connect to another port.

  The only solution I can think to... other than the simple move all the files you want to the first TC... is to use VPN not CCMM.

  Buy a VPN router... What are cheap... type of SME end pretty cheap, you can buy or you can buy a router in most common domestic type and run it to third person (dd - wrt, openwrt, Gargoyle, etc.).

  Once you have established a tunnel in your local network, then all in the local network is fully accessible.

• Lenovo Canada refuses to replace my 3000 N100 bad battery.

  I followed the advice given by Mark_Levono and called Lenovo support and I was told that they will not honor the warranty of 18 months for me because my warranty is more based on one year her.  I fully meet the condition of replacement displayed in the URL (see URL http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-69671). They said that they do not know it and the link isn't an official announcement and maybe it's an obsolete page. I get only a few days left and I need help to get my Lenovo battery fixed. Can I call rather USA Lenovo support or if your guy have another number I can complain about it? Thank you.

  Jingyu, welcome to the forum,

  Sorry to hear that you're having trouble. We gave you a call by the rep number you were talking about? It is very important as you say that you have only a few days left.

  If you have a phone number, I would call again and if possible to make reference to the number of appeal; You'll perhaps reach a more useful Rep. the Outphasing 69671 document once again, but also point out that it has been changed on 2008-08-25, printed at the bottom of the document, and it is up to date. Make sure you get a new phone number.

  If you are a new refuse and know absolutely sure that you meet all the requirements, tell them you want to file a complaint and they should be able to start this process.

  Let us know how you go.

• BlackBerry Smartphones, the Blackberry 8800 Will work with Telus in the Canada?

  My girlfriend wants a new phone, I want to just make sure that it works with telus before buying.

  Can someone let me know?

  TELUS is a carrier of the CDMA network and the 8800 is a device of GSM network.

  The 8830 is the similar device that will focus on Telus.

• LAN/WAN ports not supposed to be Gigabit? Capped at 250Mbps, NOT because of the ISP LAN devices.

  Hi all

  Have a bit of a problem here. I have Internet Fiber-to-the-home (FTTH) with Bell Canada and have their Fibe Gigabit service which is 940/120 speeds up and down, respectively. I was able to bypass his combo modem/router using a switch connected to the optical network terminal (HAVE) where the fiber cable enters the House (which serves mainly my base modem) and using custom settings of VLAN and DNS in ports specific for my fiber IPTV service Bell and receivers work together through my router.

  So, I have a few routers that I tried this with to try to solve my problem. My Asus RT-AC5300 and others have no problem with having me my subscribed speed - certainly through devices connected to gigabit LAN and also via WiFi on compatible devices. But I'm not concerned about WiFi - it is specifically wired ethernet devices that are the cause. I use CAT5e and CAT6 cables only because he is a Gigabit connection. The issue I have with my Time Capsule (3 to, latest model AC) is that, literally, speeds for gigabit wired devices will not exceed 250Mbps downstream. Download speeds can hit 125Mbps without problem. Why is this? Is there something my Time Capsule prevents leave the LAN ports operating at gigabit full transfer speed? It is not only a device - I have multiple gigabit devices I tested, on all three of the TC ports, and none of them exceed 250Mbps. Yet when I connect them to another router gigabit, such as the Asus I've described but also others, they have no problem hitting 900 + Mbps downstream on the exact same network configuration and Setup at home.

  Thanks for any ideas, comments or suggestions. Y at - it a setting I have accidentally enabled that is the cause? I had much rather use the TC of the most convenient airport for my network I was planning on getting multiple Airport extreme to position around the House to cover literally home WiFi and LAN bridges through the simple installation of these devices, but I do if I can't use my fiber subscribed speed.

  OR maybe I have a defective unit. Thanks again for the help!

  See you soon

  The issue I have with my Time Capsule (3 to, latest model AC) is that, literally, speeds for gigabit wired devices will not exceed 250Mbps downstream. Download speeds can hit 125Mbps without problem. Why is this?

  Apple AirPort routers have been designed to work with the cable standard and DSL connections.  The fiber is the new ball game, and Apple knows yet how to play the game, let alone to understand the rules.

  Most of the problems associated with connections to high speed on airports is a result of the decision of Apple to eliminate any kind of manual settings to manually adjust the speed of the WAN port on the router... and are based rather on an "Auto" setting.  Automatic adjustment seems to work pretty well on the fiber up to approximately 100 Mbps connections, but the WAN port is struggling to negotiate with high-speed connections when it is connected directly to the fiber. LAN ports can also be affected.

  Some users have reported that insert a Gigabit switch between the connection of the fiber and the Time Capsule or AirPort Extreme has helped with speeds. The theory here is that the switch can negotiate with the fiber connection much better than the WAN port on the Apple device.  If you have a handy Gigabit Ethernet switch, that it could not hurt to try this "Workaround".  Other users report no benefit when they try it.

  Yet when I connect them to another router gigabit, such as the Asus I've described but also others, they have no problem hitting 900 + Mbps downstream on the exact same network configuration and Setup at home.

  The time Capsule is not directly connected to the fiber connection, so it OK to talk and negotiate with what he sees as a 'normal' a conventional router connection.

  Don't forget also that the 802.11ac products were designed before 2013. Current products have not changed since their introduction in June 2013.

  The bottom line... Apple needs to decide whether it wants to be an actor, or leave the routing other players company established. Such what, Apple is far behind the curve... my opinion.

  While it might not hurt to take the time Capsule to an Apple Store to check over the machine, you might want to ensure that they have in fact a fiber connection high speed to test.