Satellite A10 - CD burning 800 MB extension

Similar Questions

• Satellite A10: WinXP SP2 & problem sound :(

  Hello!
  I have laptop Satellite A10
  System - Windows XP and SP2
  The sound does not work :(
  Has implemented the last driver - http://support.toshiba-tro.de/tools/Satellite/sa10/win-xp/sound-xp-512013542.zip did not help :(
  Everything works without SP
  Help me!!!

  Hi sm,.

  When you want to download a driver there is a document entitled information update Microsoft Windows XP SP2. All right, I see the update for Driver Sound is not necessary for your A10.

  Check sound and Audio Devices Properties all settings anyway.

  Please also check your Volume control side dial on the front of your laptop. :)

• Satellite A10: modem port conflicts - error: 633

  Hello

  I currently have a laptop satellite A10 but im having trouble to connect to internet via modem, I have installed a new driver for my modem (modem psi) and when I try to dial up right now get error: 633 could not open port due to a conflict of port or its propaly not configured, I downloaded a new driver, but still nothing.

  I checked the ports/Device Manager and there is no port for the modem only a port for a printer of suggestions on how to solve this problem?

  Hi guys

  I ve searched and studied a lot and found this solution provided on the Microsoft Knowledge base.

  Check this document:

  * + Error message: the Modem is not installed or configured for + *.
  http://support.Microsoft.com/kb/q191444/

• The country on Satellite A10 S203 modem settings

  Hello

  I have a Satellite A10 S203. I use my laptop for most in another country then my home country (Netherlands).
  I tried to connect to internet in Germany, and I couldn't change the country of the modem.

  Does anyone know so and so, how, to change the countrysetting of the modem of my A10 S203?

  GRTS Frank

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2515&tstart=50 please

  If all goes well it will help you. If this isn't the case, please write again.

  Bye and good luck!

• Satellite A10 S103 - how to reset the Bios password

  Hello world

  I have an old Toshiba Satellite A10-S103 (model No. PSA10E - 00KWY - GK) and I forgot my bios password and I am trying to reset it by finding the jumper cmos on the motherboard (FHZSY1), but there is nowhere the J1 or pins to reset my cmos.

  Please help me

  [How do I remove a BIOS password if I forgot it? | http://APS2.Toshiba-tro.de/KB0/FAQ35002I000IR01.htm]

  + You can not remove a BIOS password yourself, if you forgot it. +

  + The laptop must be returned to an authorized dealer of Toshiba or Toshiba authorized provider that will remove the password as a service charge. +

• Satellite A10 dies after the power LED blink

  Hello

  I have a problem with the power supply of my Toshiba Satellite A10. Sometimes, after the computer sat for some time, I have a problem with the power. The "plugged power cable" - LED will start to blink and shortly after, the computer just dies.

  It can also have the time to go into a lower energy state before he does. When it happened once, it will most likely happen also when I restart the computer, but after a much shorter time. WXP won't even have time to start. If I stop to select the source of start-up, the problem will occur anyway, this isn't the software. It should also be noticed that when the computer is not turned off, the 'smart power' - is on correctly.

  I know that my battery is not very good. Completely loaded, the computer can run for maybe 3 minutes with only the battery. I know that I must have a battery connected, even if I use the power cable, but this occurs even when the mine problem. The battery would be pretty bad not even allow me to use the computer with a cable?

  It should be added, that sometimes I can use the computer for long periods of time without this problem to happen. I also have a problem with the battery not being not properly in physical contact with the pins of the computer, but this isn't the problem here, because I have the same problem with the battery removed and me holding the battery in place.

  Thank you for your help.

  Andreas

  Hello

  You description is very long and detailed and it of still not easy to say what's wrong.
  Usually, the DC-In witness lights up green when DC is provided FRO the AC current. If the output voltage of the adapter is abnormal or if power outages, this indicator flashes orange.

  So I think that is your AC adapter malfunctions or there is something wrong with the electronic power supply on the motherboard.

• Satellite A10 problems...

  Hi, I have a laptop Toshiba Satellite A10 with Windows XP Pro and I upgraded the RAM to 256 MB 510. But... does not work all my new game on it! The laptop must be pretty hard! I've updated all the drivers... but still nothing!

  Can someone tell me what is the problem?

  Kind regards... Hans

  Hello Hans,.

  Sorry, but what does not work?

  You get an error message during playback?
  Is there a plugin missing as direct X for example. Or is the power of the graphics card to the inadequacy of this games?

  You may have a game for example?

  Good bye

• Incompatibility of modem satellite A10

  Hello
  A few months ago, I bought the laptop satellite A10 in Australia. All the time I've been able to, I was very sattisfied with it.
  Now, when I moved to the Slovakia, I realized an incompatibility of modem dial-up, so the modem does not work in Slovak telecommunications network.
  Is it possible to install a firmware or to do something about this modem won't work in this area?
  Thanks for help

  Bishop

  Hello
  Checked the modem country settings in the control panel?

  Good bye

• Satellite A10, how will we change access BIOS Menu?

  I have a big problem with the Toshiba Satellite A10.
  I want to re install Windows XP by starting in the CD Rom, but by default, the startup is for HD.

  Turn on my laptop, pressins press ESC, then F1, we have the menu of the BIOS, BUT we can only change the time and the password.
  I don't know how for the Windows BOOT PRIORITY to change the setting.

  Please help me!
  I would change the Boot Configuration, but impossible in the menu of the BIOS even by perform F12 key when from the laptop.

  Hi nclaude,

  Normally, you enter by turning on the laptop by pressing the ESC key, then F1 to bios.

  If you can only change the time, it could be that you without administrative rights in the bios.

  Perhaps you or someone else has entered a supervisor password to save the bios of unauthorized changes!

  But you can also boot CD-ROM by pressing c (for the cd Rom) in the startup process.

  hope this helps you

  BR

• Satellite A10-wireless problem

  Hello! I have the Satellite A10 with integrated wireless Windows XP Professional. I was trying desperately to make wireless communication integrated works, but without success. Windows has found two "Base system device", and I suspect that one of them is the wireless. I tried to install different wireless drivers that are supplied with the CD for the laptop, but so far without success - Windows refuses to accept these drivers for unknown devices. No idea what I am doing wrong? I downloaded the latest drivers wireless for A10, but nothing has changed. One of my friends suggested that the BIOS must have a setting to toggle wireless, but I couldn't find this setting in the BIOS. Any help would be greatly appreciated!

  Hello
  Initially, you are sure that your computer has preinstalled absolute Wifi?

  To be sure about you could give me the complete Modelnumber or serial number.

  I am so lucky to find the installed equipment.

  THX & bye

• Satellite A10: I lost the recovery CD - how do I get one?

  Hello

  I am trying to reinstall Windows XP on my Satellite A10, but I lost the recovery CD.
  I had a 'normal' Windows XP installation CD I try to use to reinstall, but installation will not take the serial number on the botton of my laptop...

  Do you know what is a workaround for this?
  And ultimately how to get a copy of the installation CD...

  Best regards

  Even

  The key that is located on the bottom of the unit is only an OEM key.
  This means that it only works with the OEM preinstalled and bundled with the laptop version. Simply said, you can't use this key with other Windows operating systems.

  If you want to reinstall the operating system from the original Windows CD, then you must use the key that belongs to this CD!

  However, you can order a new CD from recovery of the ASP in your country.
  Simply contact the guys. They might help you to order.

  Good bye

• Satellite A10 - good need driver wireless

  I have a laptop Satellite A10, have reinstalled XP and can not find the driver for the wireless card. Have you tried all those on the A10 download section over some pilots generic atheros.

  The problem is that the dev_id is in any of the infs for all drivers.

  Anyone else have one of these cards wireless so if you could point me to a wireless driver that works and the attached successfully.

  Tosh part number:-PA3233U-1PC
  Atheros chip:-AR5211A
  Hardware XP ID:-PCI\VEN = 168 & dev_id = ff12

  See you soon

  Hello

  Toshiba WLAN portal you will find an Atheros driver you should work for you too:
  http://APS2.toshiba-tro.de/WLAN

  Try it and post your result!

  I m wondering that the download page of the drivers on the Toshiba driver do not work for you. Normally, they are prétestées and compatible with the hardware on the laptop

• Satellite A10: Modem - no dial tone error 680.

  Hello

  Seems to be a common problem search the ends of the net even if I have to find a solution.
  No dial tone error 680. Satellite A10 running Windows XP SP2.
  Interviewed modem-It's ok.
  Check wait for the tone. still not connect.
  Have tried different telephone cable, ISP, reinstall the drivers, control of the region (UK).
  Check the malware, corruption of the registry. Nothing there.
  Reinstalled from the Toshiba restore CD. Still the same problem.
  The BONES of config system permit
  Check for driver updates. None.

  Manage devices only show and COM ports if Port Modem Properties settings show that it is at COM3. have tried to change to COM4 - makes no difference.

  What is the solution?

  Hello

  This error almost always occurs because the computer cannot hear regular ringing when it picks up the phone line to dial through the modem.
  Unfortunately, there is no standard solution for this problem.
  Did you check that the modem is plugged into a phone point in the wall?

  In addition, check out this site for information:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;326681&product=winxp
  http://support.GCI.NET/KB/kb74
  http://support.earthlink.NET/Mu/1/PSC/IMG/walkthroughs/windows_9x_nt/dialers/dun_1.3/2267.PSC.html
  http://www.Xtra.co.nz/help/0, 6156-1296801, 00.html

  Good luck

  Good bye

• satellite A10: no com3 don't dailtone

  We have a toshiba satellite A10 with a modem internal toshiba. (XP OPERATING SYSTEM)
  We lost the connection while working, and when we tried to reconnect there was no dial tone.

  the modem works fine after interrogation he under the modem diagnostics, but just to be safe, I also tried another card modem with the same results.
  the line is very good, I use it now.
  in Device Manager, I could not see an entry for the ports, so I did a scan of hardware, but which does nothing and then I added a Compote via the Add Hardware icon in Control Panel. This solves the problem I couldn't see the ports in the Device Manager but now the thus created com3 has a yellow exclamation point and tells me that the device cannot start code 10.

  So I deleted all the devices of yellow exclamation point and the modem, then restarted and after that the modem is immediately recognized and installed but her agrees not and they must be added manually with the same result of yellow exclamation point.

  Some people suggest I get into the bios and remove or disable the ports and then start but bios does not even an entry for the ports. I get into the bios by keeping ESC pressed to the commissioning and in fact Toshiba adds a nice button on the control panel with HWsetup that gives the same options.

  so now, I ran out of options and turn to experts for help.

  Thanks, Leo

  Hello

  Code 10 means that this device cannot start. I'm a little confused about your problem. First COM 3 is a virtual port and it is normal that this port is invisible. If this port is visible, it must be with exclamation yellow because it's the virtual port, no real hardware. But it is not necessary be installed with the Add Hardware Wizard.

  Your problem can be caused by many things.

  1. delete all entries with yellow exclamations. Search for hardware changes again. Now new modem is installed, and my opinion is that should now work correctly. But remember: you must make the new dial-up network connection and old must be deleted. It is very important because the old a lot of content of information settings that installed new Modem cannot use more. Also check the properties of your modem.

  2. after the installation of your modem card, there may be some conflicts with Modem from Toshiba. If you do not use the modem card all maybe more, is useful to delete all installed software.

  3. it is also possible that you have some dialer installed on your machine. Check it!

  If that doesn t work, please let us know. And if you create your connection again, tell us what a problem was.

  BR

• Re: Satellite A10-S100 - how to replace the keyboard?

  I need to replace the card key of my Satellite A10-S100.

  What are the steps I should follow? I have to unscrew all the screws in the back?

  Hi mate,

  You never exchanged a keyboard or any other part of the equipment of a laptop? Well, maybe you should ask a technician for laptop help

  I m not Satellite A10 owner but normally you remove the keyboard first (between the keyboard and display) bracket. Under the keyboard support, you will find a few screw now the keyboard. Remove them and then you can lift the keyboard but be Ume with the cable on the underside of the keyboard.

  Good luck! :)