Letsencrypt/certbot experience the ReadyNAS OS on the RN202 6.5.0

Similar Questions

• Experience the real world of vSAN to Production environments

  Hello

  I'm looking by putting forward a case to migrate an old HP EVA SAN company, to vSAN6 class. I'd really like some comments from those experienced with running the VSAN1 in their environments on its reliability and performance, and if they would consider worthy of a production environment VSAN6?

  Have you had a lot of pinch, or major problems with vSAN points?

  You give a target... we run in the order of 120 of average size Windows virtual machines in each of 2 data centers (which require 12 TB of storage in each ms) and would seek to 2 x 4 host VSANS loan node clusters.

  Would appreciate any input.

  Thank you

  We went with the config 'High' of Dell, with a few tweaks.  We have added 2 discs so that we had the max of 7 per disk group.  And we exchanged the Perc card a LSI 9207-8i.  Media LSI cross so we can hot swap drives when they fail.  PERC does not support RAID 0 to go down the server to share a drive.  As I said, in my rear view I would have 6 R720s instead of the R820s 3.

  Regarding the FTT, you can set per virtual machine so level 1 VMs get FTT = 2 and Test/Dev gets FTT = 1.

  Strange that you can not get them to the United Kingdom.  I guess you could just it build with your favorite retailer.  You do not have the convenience of 1 Reference, but you can get the right equipment.

  We have 2 1Gb dual port NIC for management and VM traffic goes to a stack of 3850 X Cisco switch.  We then 2 10 GB dual port NIC for vSAN goes to a stack of switch Dell 4032.  REALLY like the Dell switches, a lot of value for the price.

  Finished our about 60 k USD, but if I would have been to 6 knots, then each node would have about 35 k.  Your price sounds just for me.

  Thank you, Zach.

• We will encrypt on OS 6.5?

  Does anyone tried to get we will encrypt working on a ReadyNAS running OS 6.5?

  I see an old post was a few people thought it was interesting, but nothing new since we will encrypt is actually released.

  https://community.NETGEAR.com/T5/using-your-ReadyNAS/quot-let-s-encrypt-quot-has-anyone-tested-on-re...

  -Matt

  Please see here:

  https://community.NETGEAR.com/T5/using-your-ReadyNAS/Letsencrypt-certbot-experiments-with-ReadyNAS-O...

• Big problem in the finder then the copy of the file trought different drivers

  For my work, I download and archive about 100 GB of photos every time.

  After upgrading to Mac OS sierra I meet big difficult.

  1 copy a lot of files require a lot of time more instead of last osx (about 4-5 times more)

  2 - from multiple instances of copy beginning with a lot of delay (approximately 5-6 minutes after the control drag & drop or copy/paste)

  3 - once the completed instance disappear and always with "0 file to the end" for a long time (about half the time of the copy) and in any case until all istances have been terminated

  4 - after all: not all the files are copied (the last time about 300 files are lost in a total of 4000)

  before all the reactions:

  -all my system works perfectly before the sierra of macos

  -all my drivers are fully working (tested in ather Mac without sierra)

  -a speedtest with the blackmagik tool say that the system can still run at full speed

  -If a script third spear the copy no problem

  that: in my experience, the question is on sierra finder.

  clearly, I can't work with this type of system, that:

  When apple will fix problem of che?

  How can I return to osx than el capitan without lost my documents and applications?

  Thank you

  > How can I return to osx el capitan without lost my documents and applications?

  This link is for El Capitan, but it also applies to the Sierra:

  OS X El Capitan: revert to a previous version of OS X

• Full service then no appeal abandoned service cannot connect to the Tower

  Posted to help others:

  I bought an iPhone 6 s it took 3 hours for Verizon connect my phone to my new Verizon account. The phone would display full service bars then, slide an or no service in bars. the phone was finally connected but may 2016 so far I sill experience the same problem of poor or no service call and dropped. Often the phone will not even scream or try to connect to the network.  Apple has replaced the phone 3 x but with no. change my service problems. Verizon and Apple senior level tech support spent to treat 30 + hours on the phone with me trying to solve this problem. We replaced the SIM cards without change. When I put the SIM card in my iPhone 6 it works fine. Full don't signal any calls interrupted and service when roaming. Back in the 6s and no service in the same place. Put the SIM card in the other Iphones not without problem.  If roaming is enabled, phone often it will not conbect to the tower at all. WiFi call is disabled and LTE voice data are on. I've disabled CDMA and data with little or no change with the problem. When iphone 6s loses the service and I toggle airport power phone it will display momentarily full service bars, then the bars one or not, while remaining connected to LTE. In some areas, I can receive calls but can not shout. Sometimes I can txt use data without showing on my plan as using FaceTime and can use the internet. The order indicated above of multiservices to no service happens within 10 seconds repeat throughout the day all areas companies Verizon towers and riaming towers. Verizon finally got the iPhone 6 s to work with full signal across remote I've ever had service, but continue to hamper the not being able to call in roaming. Shortly after that, the phone back to old habits after that they tried to solve the roaming problem.

  After 5 months of no stop calls to Verizon senior level tech supports on September 22, a high tech support tech senior level line finally came to the conclusion after 3 hours of troubleshooting determined it is a software problem Apple 100%. It determined that the phone for a month not was not connected totally to Verizon even if I used it. There to reset the SIM card and the network settings on the phone several times during this period to have the phone drop any connection after initial power that showed a full service then dropped the LTE then, he loses all the bars of service then shows no bar service then no service what so ever in 10 seconds. This was the problem with this phone on the first day.

  He explained that he has heard of what is happening and that Apple is currently working on a solution, but will not be out until possibly October 2016. He also said that this problen is happening now with new models Iphone 7.

  HE then stated that a specific sequence is usually not used must be used to reset the network settings by releasing the bug fix.

  How to restore your device

  1. First of all, back up your device using iTunes or iCloud so you don't lose any personal information.

  Note: If this is the first time that you have saved on iCloud, it may take time for several reasons (speed of Wi - Fi, amount of info on your device).

  2. Connect to iTunes to restore your device. 3. Choose "Set Up as new". 4. Make sure you that you connect to iCloud with your Apple ID so that only your contacts are re-added. Do not re - add photos, music or applications as they can be the source of your problem. 5. Set up your email. 6. Test for the next few days to determine if your problem has been resolved. 7. Restore your backup from iTunes or iCloud.

  Note: If you have a food problem, try to use the recovery mode.

  I hope this helps someone it is to have the same problems. I'm waiting to see if the bug fix works otherwise I'm going to an android phone. It has been too long a process without having a phone that works.

  I have the same problem - it has taken far too much time out of my weekend to try to resolve this problem. In addition, the Apple support person I spoke on the phone was very condescending.

  I've read elsewhere that change the LTE cell Options > Data Only will not solve the problem. So far, this seems to have worked for me.

• Setting app Crash when I tried to put in place the home screen wallpaper

  The problem happen in previous IOS, occur after the upgrade to IOS 10.

  Restart your device by holding down the home and power button until the Apple logo appears.

  If you still experience the problem connect the device to a computer running iTunes and restore the machine like new. Make sure that you have a backup first.

  If it still fails then a reset of the device DFU.

  If this fails again to bring the tablet in an Apple store and have it checked.

• I have an IMAc running on the latest version of El Capitan. MY blutooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear.

  I have an IMac running on El Capitan 10.11.6. My bluetooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear - I have to hold down the back of the screen to force it to close.  This message of the 2 line took almost an hour to type as I have no control on the touchpad.

  Hello Kluggerjo,

  Thank you for reaching out to the Community Support from Apple. I know how important it must be able to count on your devices work as expected, and I have a few steps that should help resolve the behaviors you see.

  I would recommend to go by resetting your management system (SCM) controller. MSC helps control and regulate different material on your Mac, including Bluetooth systems.  This article will guide you in this process: reset the management system (SCM) controller on your Mac.

  If you still experience the issue after the test, you can test the behavior to a test user. This will help us to determine if the problem is systemic or isolated to your user account. This article will guide you in this process: How to test a question in another account on your Mac user

  If the behavior is duplicated to the test user, I'd recommend reinstalling El Capitan. This will not delete your data. To reinstall using the recovery mode, take a look at this article: How to reinstall OS X

  If you experience any problems or have any questions, please let us know. The entire community is here to help.
  -Best regards

• Cannot restore the resolution of the laptop

  I have an old 15 "Macbook Pro mid-2010. I still mostly run for daily work snow leopard.

  I have hooked to an external monitor and experience the resolution on the external display. I used an external display several times before, but without twisting his resolution.

  In the past whenever I have disconnected externally internal display by default my good laptop back to its native resolution, which seems to be of 1280 x 1024.

  But since my experimentation with a resolution from the outside, it is no longer the case. Resolution "reads" 1280 x 1024 in System Preferences, but the screen is severely "letter-put in a box" with large black bars on each side, no amount of clicking on the various resolutions and return to 1280 x 1024 don't restore correctly display without black bans.

  I tried to zap the PRAM, thinking that that would restore the screen settings internal. But it does not work. Any ideas?

  Try a SMC reset. Article covers when necessary, but this will not affect anything.

  Reset the SMC

• Change the hard disk of 1.4 Ghz Mac Mini end of 2014

  Good morning Apple community, so here's the problem: I had a voltage breakdown because via the USB port of an EPSON LX - 300 printer, at present when the USB and the Mac Mini contact, ventilation Mac shutoff valve and after a few tries to do turn it finally do. But I see that a gray folder appears with an exclamation mark, then, with my other mac I download OS X El Capitan and do a Booteable USB, after that I enter the utilities disk and found that the "Macintosh HD" was not there and 2 USB 3.0 also didn't work. I picked up at a technical Service allow in my city and have told me that the HARD drive is broken and must be replaced, they say it could be replace by an of a 7200 rpm or 5400 RPM HARD drive RPM HARD drive, also says that couldn't put an SSD. I start research and found it is possible to put an SSD without problem. So my question is that's for sure, so I trust that an SSD will work with flawessly, and that I will also get a big performance improvement.

  My Mac is:

  Mac Mini end of 2014 1.4 Ghz 4 GB of RAM, Intel HD 5000 and a 500 GB drive HARD 5400 RPM death.

  So, my best regards to the community and hope for a response.

  I've been running my 2014 MM off an external SSD with USB 3.0 since the beginning of this year, after a bunch of trial and error; That's what I have:

  • Samsung 850 Evo SSD
  • Cutting Ultra Slim 2.5 SATA to USB 3.0 aluminum hard drive external enclosure

  Unfortunately, I don't have much advice to give you else make sure you have a proper forum for IT. From my experience, the bad speaker will make the difference in whether or not the Mac recognizes the SSD on initialize toward the top.

  Good luck!

• 38.0 I lost before, reply/ReplyAll is a mess and customize the tool bar does not help. Help

  If automatic installation of 38.0 left the above problems. Customize either is not what I want or drag on the toolbar. At least I can return to v37? I do not understand the merits of v38 which means, in my opinion, I don't not need them!
  Quite separately from what the above I have a problem with my overflow of memory for temporary periods, even when I'm not demanding any activity. I installed more memory, which aleviated the problem briefly, but all of a sudden, a few weeks ago he's back. I did tests antivirus nothing helps. When this happens it is always Mozilla and Thunderbird as top of the list of activities and I am tempted to re - install. I'm going to do a back-up first but prefer not to rely on what I haven't tried recovering from a back-up. Specifically I need to take measures to protect and preserve the history of my email? And addrbk?
  Thank you in anticipation of any help.

  I was using version 38.0.1 and did not experience the problems you describe, but there can be other personalized preferences etc. accumulated over time that the difference between your profile and mine.
  Yes, the answer may have looked like manual, but it's usually the fastest method to get the corrected results.

  I am now using the latest version 38.1.0 and currently is not undergoing problems.

• Black spot on the camera

  When I use the camera, a black dot appears on the right side (when you hold the phone horizontally).

  I took a few pictures, a few minutes before the black spot appeared. West nothing on the lens. There might be a microscopic piece of dust inside, but I HIGHLY doubt it.

  I ve heard from a few people that is probably not a physical defect, but a real question much experimented with iOS 8.

  I m using the latest version of iOS, but they also heard some experience the same problem there.

  Any suggestions?

  just to learn, put the dust on your camera and take a look.., well he cant focus just that close, but you may notice theres no way it is dust! However, if she still something to do with the material, as this would mean that the sensor burned some pixels, but this usually happens only if you cam laser or try to take pictures of real welding close or things like that... If you don't have these bad things to your camera, it could be the connector.

  But it is unlikely, even if I had exactly this problem of connector camera back in the day with my 3gs.

  But just because these newer iDevices use screws to attach the connectors its very unlikely!

  If the restart does not work try a little touched the phone and check if the point changes or even disappears. If who have some influence the sensor may be broken since you have this iphone or this is the connector as I have just said.

  If nothing changes by slapping, etc. shaking your phone you should try to restore your device via itunes

• How can I clear the cache in safari and I should do periodically

  How can I clear the cache in safari and I should do periodically

  Way the easiest is to go to Safari > Preferences > advanced and check the box that says show develop menu in menu bar. Then, go to the develop menu and select empty cache.

  The only reason is that if you experience the problem and to increase the storage space available on the disk.

• Why following appears when clicking on the shortcut icon on the desktop to go to Mozilla Firefox? Recently, it's new.

  Smartbar

  file///C:/Documents%20and%20Settings/Owner/Applications%20Data/Mozilla/Firefox/Profiles/al9rtzp5.default/extensions/%7Bbb45ef8e-1e36-4535-a017-ec908fb1e335%7/chrome/CT3101810/content/tb/al/al.view.html

  By clicking on the icon should go to my home page of CNN.com, but above appears in the library before the home page.

  Just do a tango of security to completely clean my system.

  Hello, it is likely that there is an invalid extension installed on Firefox. Can you please try to start Firefox in Mode safe and then see if you experience the problem

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Slow down the Evo 850 Samsung SSD

  Recently, I had a new SSD Samsung 850 EVO and installed on my macbook pro 2009. Using OSX El Capitan.

  But the reading and writing speeds I get are:

  Address: 209 MB/s

  Read: 264 MB/s

  and I should get about 450 MB for read and write at least. I went through to change the start-up as well as trimming startup disk, but did not help much.

  No idea how I can fix this problem? Thank you.

  Mbps 2009 have SATA2 connectivity.  You will not be able to experience the full capacity of the Samsung SSD.  You would need a MBP 2011 or newer to realize the full potential of this SSD. (This is when SATA3 connectivity was introduced).

  Ciao.

• HP ZBook 15 G3: BSOD when connecting to the HP Elite Thunderbolt 3 docking station

  I recently (yesterday, 16/08/16) began to experience the dreaded Blue Screen of Death, whenever my laptop is connected to my HP Elite Thunderbolt 3 Dock.

  The machine is a HP ZBook 15 G3. It was connected to the docking station for more than a month without this problem. I don't know why at the time because I don't remember any updates or new software before that happens.

  The dock is connected to 2 x monitors via HDMI cables and an ethernet cable. I connect a mouse and wireless keyboard to a USB3 port on the laptop.

  If the dock is connected to the laptop at the start, he reached the login screen front of BSOD. If I start without it connected, it will be BSOD a few seconds after connecting the dock. He never to the point where the monitors display anything. It can be started with the dock connected in Safe Mode, as it seems to disable job.

  I've updated all the drivers and BIOS (including download the Softpaq Download Manager), but there has been no change. I have also updated the NVIDIA drivers to the latest version without change.

  What should I do next to solve the problem?

  Did you analyze the dump files, they said?

  I would also like to update these:

  Intel's Thunderbolt sure Connect utility (15.3.40.275)
  Thunderbolt from Intel for the Dock Thunderbolt from HP (16.1.7.0.8) Firmware update
  ASMedia eXtensible Host Controller Driver (1.16.35.1)
  ASMedia ASM1042A Firmware Update for HP Thunderbolt 3 Dock (131025.10.11.23)

  More BIOS if you're not on 1.09 or 1.10, some people say that they have problems with 1.10, so maybe try downgrade to 1.09.

  You can also try experimenting with the 'Thunderbolt security level' setting in the bios security switching No. If it is authorized by the user, or vice versa.