Libretto U100 - Alternative to the lack of light 'Caps Lock'

Strange that the U100 has no witness "Caps Lock". The small keyboard meant that, at first, I was still pressing caps lock shift when I tried to press the letter "a". Now I'm used to, I can type on it almost as fast as on my main laptop (Tecra S1) is not a big problem. However, a Caps Lock warning is always useful.

I found a nice solution to http://64.233.161.104/search?q=cache:8YCkDdFl2TEJ:www.skarbek.com.au/chapter1.pdf+background+processes+causing+intermit tent + disc + activity + windows 2000 & hl = en.

Here is a direct quote from the link: 'you can change windows to make a sound whenever the lock shift key is affected. Do it by clicking on start, settings, Control Panel, on the keyboard tab and Accessibility Options, click the checkbox ToggleKeys. Now when you press caps lock, shift, it makes a sound, and when you press it again to turn it out it will make a different sound. By activating this option the accidental press becomes immediately noticeable. »

It works very well. Assuming that the volume is not set to zero, I have a high tone when shift caps lock is enabled and a low beep when it turns off.

David Tong.

PS. I'm the only person on the forum who is actually using these wonderful machines?

Hello David

Great display! Thanks for this useful info and the link. I think that the community should have more users like you. ;)

Good bye

Tags: Toshiba

Similar Questions

  • Libretto U100 - cannot get the microphone to work

    Hello

    I have a problem with the microphone on laptop and also when using my headset Philips SHM3100 Multimedia bought recently. I tried to use the Windows Sound Recorder software, but my voice is not recognized at all.

    I have a headset Bluetooth Configuration of whose sound and the microphone works perfectly. Someone had the same problem and found a solution?

    Thank you much in advance.
    Kind regards.

    Post edited by: julia1

    Hello

    What a problem? Do you think that it is really a problem or perhaps only a configuration setting bad microphone?
    I think that he just misconfigured s mic settings!

    If you use the external microphone, you should check the settings in the-> sound & audio devices Control Panel.
    In the Volume press tab on the Advanced button and check if the Microphone control is not mute.
    Use the Advanced button and the brand, select options called Mic2 and mic amp.

    Good bye

  • Libretto U100 often loses the connection to the Wlan platform

    Hello

    I have a problem with my wireless network card. I often lose the connection with the hub. I read on another forum that it might be a good idea to update the drivers. I've never done this before and I want to make sure I do it correctly. Can you please let me know the exact steps?

    Thanks in advance.
    Kind regards

    Hello

    The update of the driver is not difficult. First of all to know what Wlan card you use! This can be checked in the device under network adapters Manager.
    Open the tree menu and check the card WiFi was installed.

    Then you check the Toshiba driver for the most recent updates page or visit the Wlan card manufacturing site to download the latest version of the Wlan driver.

    For the most part this driver package includes the setup.exe file. This file should be run. All that s. But if the setup.exe will fail then you could install or update the driver through Device Manager. There is an option that allows you to update the driver. You must choose the driver download source and the windows updates the old driver. All that s.

  • I have a g62 and it is locked. power light is on and the light 'caps lock '.

    We have a G62. It is locked. Power light is on, light traffic and wireless light. The screen is completely blank. Any ideas on how to reset this 'thing'?

    rafburtonwood wrote:

    We have a G62. It is locked. Power light is on, light traffic and wireless light. The screen is completely blank. Any ideas on how to reset this 'thing'?

    Hi rafburtonwood,

    Try a hard reset as follows:

    Remove the battery and unplug the DC power adapter.
    Press and hold the power button for more than 15 seconds.
    Plug the DC power adapter (leave the battery for now)
    Press the power button

    Please post your results here.

    Best regards

    ERICO

  • Libretto U100 - exchange of HARD drive

    Is it possible to change the hard drive of a Libretto U100 without voiding the warranty? Does anyone tried to do it again?

    Change HDD on the Libretto U100 is very complicated and without maintenance manuals, you can not do this. Believe me, booklet design is quite complicated and I don't think you can do it yourself.

  • two locks of laptop see the light as lock sign1 and lock signed and fully offshore

    Hello

    I have HP 6730 laptop computer b today, when I start it show me

    two locks light as ld (lock sign1) and (lock signed) and turns it off completely

    lock sign1 means a pic of lock with number 1

    average of locking signed a lock with a text pic

    It's not start all these two locks photo blick 2 times, then turns off completely another conduit of speakers and! and illustrated also box.

    No display at all.

    Please help what is this error?

    Thank you

    Those are the LEDs for shift caps lock and number lock. The fact that your computer does not come on and the lights flash means that the laptop trying to communicate an error code. See LED display empty Error Codes for more information.

  • Laptop starts sometimes, but most of the time I get the flashing single LED SHIFT NUMLOCK and caps lock.

    Presario CQ61-411WM

    OS is Windows 7

    Most of the time the laptop does not start upward and I get the only witness flashing Caps Lock and Num Loc.  However, if I'm persistent and keep trying the Start button it will start.  After that it starts everything works fine.  I can even do a reboot and it will stop and start up.  But if I make a stop so I have to press the start several times (it will come back with the only witness flashing Caps Lock and Num Loc) before it will start again.

    Any suggestions?

    Buddy,

    The system does not close completely to the bottom of all components during a restart.

    When you can get your backups done, you could do some tests on the material.

    You can do a search using your favorite search engine to learn more about sleep verses shutdown.

    For example: Shut Down versus sleep against Hibernate

    Click on the Thumbs-Up Kudos to testify and say thank you.

    Although I strive to reflect best practices of HP, I do not work for HP.

  • Libretto U100 - an alternatives more missing and Caps Lock light

    Have the U100 beep a warning when you accidentally click on the SHIFT key is convenient (see my 31.8.05 post), but a beautiful new step is to load a bit of freeware called cAPSlOCKhASSER. He sits quietly in the system tray, but if you press NumLock shift, he flashes a warning and immediately turns distributed lock.

    I found it on the site Web of Easy2Sink, my favorite file sync software email. You can download it from http://www.easy2sync.de/en/download/. I now have a shortcut to cAPSlOCKhASSER.exe in your startup folder so it starts at startup.

    Either way, if you want to disable the caps lock http://www.bleepingcomputer.com/forums/lofiversion/index.php/t14629.html total offers a reg file sloppy to disable the caps lock and another to restore it. They worked fine when I tried to get out them, but turn off the caps lock is too drastic for me and cAPSlOCKhASSER suits me better.

    David Tong
    Leeds, UK.

    Hello

    Thanks for this useful information.
    I'm sure that this information could be very interesting for other users.

    Good bye

  • Libretto U100 - best Alternative for lack of Caps Lock Led

    If you use Windows XP, search the Internet for the file keystate.zip. It creates an icon in the systray with simulated led which goes red when the caps lock is on and black when the caps lock are out of service.

    There is a Toshiba program even better if you operate under Windows 98 SE: toshled9.exe. It is basically the same as keystate.zip but it has a much clearer and more simulated led. In addition, toshled9.exe has 4 more market icons that you might find useful. Unfortunately, toshled9.exe does not work in Windows XP.

    Thanks for the comments

  • Libretto U100: Light IN DC glow orange

    A few days ago I bought a new Libretto U100, everything works fine without problems.

    But after that the battery has been charged, and I disconnect the computer from the domain controller, I can see the bright orange DC IN system indicator, why?

    The user manual says nothing about all the lights when you are not using the computer?

    Brgds
    Torben

    Hello

    Are you sure that it is a LED 400 p?
    I know that if the output of adapters is abnormal or if power outages, this indicator flashes in orange.

  • Card SD NOT recognized on the Libretto U100/U105 with Win XP

    I have several booklet, a combination of U100 and U105, with Win XP SP3.

    I now have a camera with an SD card, but nothing to see everything in the booklet any SD card into the slot.
    I'm astronished and disappointed that Toshiba is a not ship computers laptops with SD card reader drivers.

    Please, should what driver I install to get the SD card reader work?

    Thanks in advance!

    > I am astronished and disappointed that Toshiba is a not ship computers laptops with SD card reader drivers.

    So all the drivers for Win XP for this Libretto U100 series are available on the European driver Toshiba page
    So I m wondering why you're disappointed with Toshiba

    However, I could find the driver choose:
    Product type: Archives
    Family: booklet
    Series of products: Libretto U100
    Short num: PLU10E
    OS: Windows XP

    Now you should get all the Win XP drivers.

    I guess that the Cardbus driver is the driver you are looking for her should get the card reader controller to work.
    In addition, you must install the SD Secure Module. This software is an update for your TOSHIBA Secure Digital Host controller.

  • The problem with the battery on the Libretto U100

    Hello.

    The problem is the following: shortly after the start of the loading of the battery starts squeaking (or whistle, subtle signals coming from somewhere inside the laptop or battery) and after a while, stop the load! Windows displays a message, "Battery" unknown, to continue the exercises, you must remove and insert again the battery and so 5 times until the load is complete. And the absence of such an accusation, not more than 1 hour and 45 minutes.

    That's happened?

    Libretto U100

    Capitalist salvation,
    Remember john lennon? "It's easy".

    I think that this little piece of Tech is a bit old...
    and has been used for a period of time to stay...

    the battery disappeared, some cells can't hold not more fresh...
    therefor the voltage misscounted, leads to the "unrecognized".
    We must exchange the battery...

    but no problem for a capitalist you don't ;-)

  • Upgrade the hard drive in the Libretto U100 to SSD drive

    Anyone who undertakes an upgrade of the hard drive in a Libretto U100 to a SSD? This would surely greatly improve performance. What size is the hard drive in the U100 and which connector is used to connect the drive? Can anyone tell if this mod is possible?

    Spymaster

    So, I have a machine with an SSD (Tecra M5) and it works like a charm. Unfortunately, the discs are too expensive at the moment but you can benefit from a real performance.

    Regarding your question: should be possible. You have a 1.8 inch drive "installed and there are SSDS which have almost the same form factor. Usually the U100 was delivered with MK6006GAH or MK3006GAL disks.

    Here´s a site that might help, given that the reader has the same connector as the disc in your computer: http://www.dvnation.com/microatapics.html

    Just check it out and I hope you can use my index research on SSDS... :)

    Welcome them

  • Password Protection for hard drive on the Libretto U100

    I want to protect my data in the event that I should lose my U100. Initially, I asked a password to the Bios, which is quite easy using Toshiba Assist/user password. But even better would be to apply the same password on the hard drive as well. On the Tecra M5, you can make this Toshiba Assist and safety help, but there is no option on my U100.

    The Bios has options to enter a 'HARD disk' password but when I try to do, he turns back to "Unlisted" when I try to save the change.

    There is no mention of HHD password in UK documentation, but the Australian version seems to have the feature. This site http://www.continent.com.au/buy-1990.html claims "hard drive password prevents unauthorized hard disk access and can be synchronized with the password" – that sounds just the same as on my M5.

    I would like to know if anyone here has had success with application to a disk to their U100 password.

    Hello

    Toshiba security help is not installed on the Libretto U100 and so you cannot use this function as on the Tecra M5.

    Sometimes, the HARD drive password can be set in the BIOS.
    If you want to set the password disk HARD check if it can be done in the BIOS!

    But attention!
    If you forgot the disc HARD password you will not be able to access the HARD drive and the HARD drive is no longer accessible.

  • The Libretto U100 disk partitioning

    The Libretto U100 online manual seems to discourage the use of 3rd party software to partition hard drive 60 GB. I want to use Norton Partition Magic to create virtual drives plus 3. Is this a problem?

    HI Tony,.

    I see no problem using PartionMagic to divide your hard drive.

    HTH

Maybe you are looking for

  • dv4-1225dx: resetting the administrator password

    I have a dv4-1225dx with an administrator password screen, I tried 3 times already n now I get a message that says "ENTER UNLOCK PASSWORD (key: 59000545) ', please help me." Thank you

  • How can I get rid of the system DCOM 10005 error code?

    I will be working along and then I get the blue screen. In the event viewer it shows error code 10005 DCOM system and a computer error code of Service Control. This time, the # is 7026. They are different every time. But the DCOM # is always the same

  • 446476-001 what cpu can support?

    Hello everyone, I am new in this forum and I'm sorry if my English is not very good! Well, I bought a few days ago a 446476-001 motherboard for my old book of dv6780el. When I replaced it and I had to disinstal the cpu I discovered that my old t7700

  • OnPlus MY port LED not always turned on/active when connected

    I noticed that the port of LUN is not still active despite being connected. The port will go completely dead where even a powercycle of the ON100 will not activate the port (eth1 on the device I believe based on of NTOP poster config).  The switch (S

  • Occasionally, computer crashes and goes to black screen.

    Original title: computer crashes, black screen 64-bit Windows.  My computer sometimes freezes.  Screen goes black, trying to restart, give up eventually.  Need to turn it off and restart.  Checked for viruses, registry fixed and whatever other System