License of office of trapeze does not stick after the construction of the VV package
Hi Cievo,
I am facing an issue in Thinapp,
1] prescan
[2] the application setup and apply. TPZ license and check if the license is activated.
[3] postscan
[4] set up
[5] build
After construction, the license does not own test.
Kind regards
Santosh Dale
I just sent that you virtualized application.
It works on my own machines. I hope that it is also for you.
Tags: VMware
Similar Questions
-
Computer does not start after the screen of the bios, Compaq Presario SR1023WM
Ok. Trying to fix a friend's computer and seem to have met a strange barrier.
Problem: The computer does not start after the bios screen.
Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well. And that's it as far as the computer becomes. After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect. I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point. I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected. Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success. I tried using a different memory stick and different memory as well... Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).
The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.
http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.
I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.
I have a pretty strong understanding of computer repair, so feel free to give me something to try.
If you need more information out of me, let me know as well.
Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.
At the back of the pc is the condition of the PSU led green or flashing?
-
Serial number does not work after the transfer of OSX and apps for the new Macbook Pro
My serial number does not work after the transfer of applications and OS X for my new Mac. Although the Adobe specifications say it is compatible with the older OS X, it does not seem to have no compatibility issues because
-My old Macbook Pro has Yosemite and was fully running CS5 Web premium without a problem.
-My new computer has the same * exact * OS X transferred in which the suite was fully functional with the trial.
A support of top-level, software engineer, or someone who takes care of the soap operas could
-Please provide a number of test series to test with?
- And/or activate my series?
- Or show how to disable the publication series on the old disk hard if I can't use the old computer? So that I can use with the new computer?
I chatted with technical support that keeps saying that it's a compatibility problem, to install with old OS X or buy a newer version. But I know that CS5 works with Yosemite (as I use it myself), and the only question I had is that serial # says invalid, which is separate from the functionality of the program.
I'd rather not spend hundreds more to get a new suite, when I spent a lot for CS5 already and know is fully functional on Yosemite. I have also not return to an older operating system and break things.
Moreover, I used to be a general technical Support and I am a coder of web applications, so I understand that this isn't just some sort of "reboot" of the question
No info to solve this, or a means to achieve at the highest level Tech support, would be greatly appreciated!
Thank you!
Transferred apps will certainly question of activation, because licenses files creation is completely dependent on machine, it willl created according to the particular Machine ID, if you transfer the application from one computer to another, there is incompatibility.
Therefore, it is very necessary that you are using the original installation media.
If you do not agree with the process of removing and reinstalling, try wiping the contents of SLCache and rename the SLStore folder.
WARNING: Do not forget once erase you the contents of this folder, all Adobe applications will ask the new license or re-enter the serial number.
Location: /Library/Application Support / Adobe.
It is strictly recommended to install Adobe applications using the original installation media.
-
Does not start after the upgrade to 1.5.
Does not start after the upgrade to 1.5. "EdgeAnimate.exe - not found entry Point? -Point procedure entry GetGestureInfo is not found in USER32.dll dynamic link library. »
All ideas
No problems in the past with edge since September 2012.
=============
Laptop HP Pavilion dv7-2185dx
Dv7-2185dx product name
#ABA product number NV023UA
Microprocessor 2.00 Ghz Intel Centrino 2 Processor Intel Core 2 Quad Q9000 processor technology
The microprocessor Cache L2 6 MB Cache memory
6144 MB of memory
Memory Max 8192MB
Graphic ATI Mobility Radeon HD 4650 (M96)
Video memory up to 2815 MB (1024 MB dedicated)
500 GB (5400 RPM) hard drive
Multimedia drive LightScribe SuperMulti 8 X DVD±R/RW with Support Double layer
17.3 "diagonal HD + LED display high-definition HP BrightView Widescreen Display (1600 x 900)
Fax/Modem high speed 56 k modem
Network integrated 10/100/1000 Gigabit Ethernet LAN adapter
Wireless Connectivity Intel WiFi Link 5100AGN
The Altec Lansing SRS Premium Sound technology with subwoofer
101 keyboard compatible with the keyboard keys full size numeric keypad with integrated
Pointing device touch pad with On / Off button and dedicated vertical scroll up/down pad
PC Card Slots 1 Slot ExpressCard/54 (also supports ExpressCard/34)
External ports
5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card
4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA
2 headphone
1 microphone input
HDMI
1 VGA (15-pin)
eSATA + USB 2.0
1 RJ-11 (modem)
1 RJ - 45 (LAN)
expansion port for computer 1 cell 3
1 IEEE 1394
irewire (4 pin)
1 consumer IR (remote receiver)
Other devices HP Webcam with integrated digital microphone
Dimensions 16.2 "(W) x 10.9" (D) x 1.37 "(min H) / 1.70" (maximum H)
Weight lbs 7,74
Housing for Kensington MicroSaver Security lock
Turn on the password
Accepts 3rd party locking safety devices
Software
Operating system:
Genuine Windows Vista Home Premium 64-bit with Service Pack 1
Hi, people.
I was able to reproduce the problem here, so the good news is that you're not imagining things. We are looking in the options right now for you guys, and I will contact you individually by private message to start again at the top. This being said, please note that our techniques, Vista is an operating system that is not supported, and our team is not stable time on this platform. We will do the best we can and we will keep you guys, update as to what status is.
Thank you
-Elaine
-
My apple pencil does not work after the 9.3.4 update.
My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.
< re-titled by host >
Greetings RechargeableJam,
Welcome to the communities of Apple Support!
I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.
First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:
Force a nearby application on your iPhone, iPad or iPod touch
Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.
Best regards.
-
I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:
Firefox Pei
"C:\Program Files (x 86) \Mozilla" PEINothing happens with every order.
I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "
If you have any ideas, I had appreaciate that your expertise!
Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers. -
Two iMacs does not start after the 10.11.4 update.
Two iMacs does not start after the 10.11.4 update. Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd. He then gets stuck in a loop trying to start. Tried to reset the SMC and LANDAU. Without success. Started in recovery mode and ran disk utility. Discs said OK. Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).) Installation is finished but still once does not start. Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater. Installation seems to work, but once again, the macs will not start. Same 'unexpected launchd sigkill' error. A mac is now back working properly with 10.11.3 the other will be shortly. Is there a problem with the accession? Our COMPUTER support use Munki to get updates from one day to the next. Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.
More information: two bricks iMacs were late 2013 models. A 21 "and a 27. We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.
-
ITunes does not start after the installation of Windows 10
ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).
Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support
Solution, according to this link, is:
If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
Satellite L655 touchpad button ON / OFF does not work after the installation of VAP
Why the Start button / stop the touch pad does not work after the installation of vap?
May I ask what system and what PPV version do you have installed?
I assume you mean on the Fn + F9 key combination...
Is this right?Another FN button work as shouldy?
-
Z600: computer does not start after the installation of the 5 TB SATA drive
My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk. After removing the drive, the computer starts. I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?
Thanks for the info. I added the GPT to my search and discovered what had to be done in disk management. Here is a page with step by step instructions and photos. http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/
-
computer does not start after the Windows XP logo window
Windows xp home edition
service pack 2
Dell inspiron 15011. computer does not start after the Windows XP logo window
2 works well in safe mode, even connect to the external monitor
3. I reinstalled xp many times, problem stil exist.All the answers?
Hi dhanushm,
- What happens after the Windows logo screen?
- You receive an error message?
- You have security software installed on the computer?
- Have you performed an installation clean Windows XP and even after that this problem exists?
Method 1
As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
- Click Start , and then click run.
- Type msconfig , and then click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
- When you are prompted, click restart to restart the computer.
Method 2
If fails it above step can refer to the article below and try the steps mentioned, check if it helps.
After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
-
My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10. Is there a fix for this yet?
I thought about it. The upgrade to Windows apparently damaged 10 HP SimplePass software. Once I uninstalled and reloaded the program, everything started working.
-
Original title: xp does not start after the installation of avira
I have a HP Slimline s7410
XP Home Edition SP3
I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
I have a cd/dvd drive of work.
I don't have an XP bootable installation CDMy system worked well until: I installed the free version of Avira
Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.Here's what my BSOD looks like:
Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical information:
STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)Any help is greatly appreciated! :)
My first suggestion is to do a system restore at this time point.
second suggestion is to keep your external drive connected to the pc at all times. only detach when necessary. of course, it would be better to install a second hard drive in the computer instead. in any case, keep your personal files out of the system disk is a wise thing to do. You can also download and store files for free on the Microsoft Skydrive site.
third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month. Basically, you can open the Explorer and right-click on the drive letter. then select Properties, and on the Tools tab, you will have the opportunity to run the disk check. then reboot and do a Defrag. where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.
Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.
so my suggestion is to do a series of tests using your cd bootable your computer works. see if you can actually run a chkdsk/r at the moment with them. If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them. in any case, see if your boot at the moment media can run a check disk at all, and let me know.
fifth proposal is to install "microsoft security essentials" like your anti virus program. even if you have run ubantu, it is not likely to have been an infected copy. anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations. the people who make the virus deliberately their engineer for the windows operating system. If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too. Although they no doubt, attacks are more frequent for the windows os.
-
Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005
Original title: recovery problem
Hello
According to the HP Support Forums, this error may be to do with the hard or for other reasons.
You never have it replaced with a no HP bought in car?
Read these threads HP on your error code:
If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.
See you soon...
-
computer does not start after the installation of vista updates.
computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.
Hello
Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.
Hope that information was useful
Maybe you are looking for
-
Installed by 32-bit error. Can I reinstall to get 64-bit, the recovery?
I installed by mistake 32 bit Windows 7 Premium. I should have installed Windows 7 Premium 64-bit. It is a new Satellite L630, BOF JB HiFi. When first started, he asks a series of questions, then ask what OS you want. 32 or 64 bit.Because the instruc
-
I have a windows 8.1 desktop pc. I installed Photosmart 7510 drivers from the HP website, but I keep getting error messages saying that no drivers are installed. I look in Device Manager and there is the question mark next to the printer. The prin
-
MICROSOFT ERROR REPORTING HR:0 X 80070641, I get this error when trying to install windows live messeneger for windows xp... any help please would be nice I have windows install 4.5 installed and it works fine. so it is not and I've tried everything
-
Hi all I bought this router that I had 2 problems with my old one, wirless and random reboots coverage Until now really please with my purchase, I was able to disable both my wirless Extenders because this unit offers great coverage. What I can't fin
-
WAG160N - cannot update firmware de.09
I downloaded the updated firmware (A Anex).15 but no matter what I try, I can't firmware to stick. (1) I tried the Firmware Upgrade option via the HTML interface to the router. I select the file (WAG160Nv1-EU-ANNEXA-ETSI-1.00.15-code.img) and click o