Lightning damaged cable

Lightning cable is damage, I Exchange it for a new one on the apple store?

Yes, if in a period of warranty and the damage is due to a manufacturing defect. Not if you abused the cable

Tags: iPhone

Similar Questions

  • Their is something stuck on my port of lightning and cable does not fit on my phone solutions please?

    The cable does not fit on my phone because it is stuck on the port of lightning

    6 iPhne

    Download the right cable before you damage your product and void the warranty.

    http://www.Apple.com/shop/iPhone/iPhone-accessories/power-cables

  • Satellite L40 - damaged cable that connects the touchpad to motherboard

    Hello

    I've damaged calbe that connects the touchpad to motherboard of Toshiba Satellite L40-139 I can't find a store where I could buy it. I ask someone where I can buy it, I looked to toshiba support they ask me the serial number, but I don't have (its an old computer and I can barely see 57044751 numbers, but they are not valid, so I can't ask them for help. Help, my computer does not start without this cable:]

    Well, the solution is that I should buy complete new device touchpad but I think its too expensive for me because I need a cable (and I don't know if a single cable is damaged, so I don't want to buy additional things that won't help me)

    > I tried toshiba support but they ask me the serial number but I don't have (its an old computer and I can barely see 57044751 numbers, but they are not valid, so I can't ask them for help. Help, my computer does not start without this cable:]

    To be honest, I can't believe that
    The technicians don't need serial numbers to find the right and compatible part.
    You said your laptop Satellite L40-139.
    Generally, it should be enough to get the right part

    As far as I know as the Satellite L40-139 belongs to the PSL40E series.
    Then all Satellite L40 PSL40E must use the same cable.

    I guess you need the touchpad button and cable H000006020
    I found one on ebay.

    However, I think that the Toshiba ASP in your country should be able to provide a straight part just have the model L40-139 PSL40E number

  • Reflections on non - Apple USB Lightning/cable

    I am thrifty. Nineteen dollars for a lightning/USB cable is a lot of flat on money. But I read that the non-Apple cables can damage my device. Your thoughts? If you are using a non-Apple cable, can you recommend the most reputable? Thank you very much.

    Do not use a non Apple cable or a cable that is not certified by Apple. It will not work, or if it works initially, it will ultimately be not. It is logical integrated in the firmware that will detect a non Apple cable and prevents it from working. The reason for this is that the market good cables peut causes problems with your device, in addition to being a potential fire risk, a risk of shock, etc..

    Frugality will pay not here.

    Good luck

    GB

  • Tecra M4 tablet PC damaged the screen cables

    I am trying to buy cables for the model toshiba Tablet above PC that I've damaged cables and they are not covered by the warranty, does anyone know where I might be able to find these, or even where I might be able to find the part numbers for them?
    Thank you

    Hello Paul

    You can order them as a partner of service authorized in your country. Who knows what cables you need and it is not easy to find a number of right-hand side.

    Good luck!

  • Confused about cable to restore ATV4

    My 4 does not work all of a sudden.  Just get a message on my TV to go to a link to Apple support on the restoration.  I read the instructions to restore through iTunes.  Now I'm lost.  It seems to say the cable supplied with the unit - lightning-USB cable - should not be used to restore.  I have to use another cable that does not come with. I get this right?  I have to go to Best Buy or somewhere and buy another cable.  A cable USB - C?  USB - C for... which is on the other end.   Appreciate any help.

    Some recent MacBooks have only the USB - C Sockets. This note is for the models. Your iMac should have a regular USB plug, so you can use the cable supplied with the unit.

  • Satellite A500 - new LCD cable

    Hello

    My Satellite A500-13f laptop got his damaged cable lcd and now I need a new.

    When I went to tech support, they said they found itself without a reference number on this issue, and they need the number of the room as well as the model number to make me a new cable of the LCD.

    apparently even model laptops are sometimes with different lcd screens and so different video cables

    My laptop is the exact same in this [page | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?DISC_MODEL=0&ACTION=PRI NT_WITH_BACK & service = EU & PRODUCT_ID = 1070219]

    {color: #000000} so can you help me with the number please?
    {color}

    To be honest I don't understand the problem. Toshiba service can identify the right display and the cable for your laptop model. They can find this info in the Toshiba database so I put t understand why you need to find the part number for the service.
    > When I went to technical support
    Is - this Toshiba technical support?

  • Re: Satellite A100-215 - cables for touchpad

    Recently became damaged cables from touchpad of my Toshiba (two of them), I'm looking for replacements, but I lost the original cables, so I do not know the right reference.

    If someone knows the reference of these cables and somewhere that I can buy them it would be much appreciated. Thank you.

    Hey,.

    Here he user to user s only forum so I think that the person cannot give you the exact reference of the touchpad cables, I think, but you can ask an authorized service provider. Guys can order such a cable too.

    You can find a list of all FSA here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Simply contact the guy and explain your problem again. I m, they can order such a cable to be sure. :)

  • How "tipping fees" works for the service paid by COD?

    I try to order a lightning cable using my AppleCare + alternative coverage, but I'm curious to know how "tipping fees" operation since I would like to pay with COD. The site says that there are "additional leave" ¥ 1944, i.e. "fees of no return" ¥ 1800 and tax.

    I was thinking about two possible ways to grant additional leave.

    1. Mail collect "additional leave" as a deposit, and then once Apple receives the damaged cable, Apple pays the "additional leave" by mail
    2. Mail gives me just the cable and if Apple does not receive the damaged cable, then Apple send me a bill for the costs of no return by post

    Apple web site is very vague on this issue, so thanks for your help!

    Hello

    For more information on payment terms and procedures (beyond what is already available online), contact the Apple Support:

  • iOS 9.33 charger problem

    Has anyone discovered that their formerly work cables and taken charge no longer work after update to 9.33?

    < published by host >

    Hello

    Apple recommends to use only genuine Apple Lightning USB cables or third party that Apple has certified under the program of the IFM.

    You are using counterfeit or non-certified third-party cables may cause problems including:

    • Your iPhone can not load correctly.
    • Your iPhone can not synchronize correctly.
    • Your iPhone could be damaged.
    • The cable can be more easily damaged.

    Authentic Apple Lightning to USB cables have some passages and a serial number printed on them.

    Certified cables come with the logo ' Made for iPod/iPhone/iPad "on their packaging.

    Apple also recommends using genuine Apple's USB adapters.

    Also note that the Apple warranty does not cover damage caused by the use of your iPhone with a third-party product that does not meet the specifications of Apple.

    More information:

    Identify the fakes or not certified Lightning - Apple Support connector accessories

  • What happens if the PC I just downloaded Itunes on &amp; connected to, does it display not all devices?

    What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

    Hello 2sealadies!

    Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

    If you are using a Windows PC

    1. Open Device Manager by following the steps for the version of Windows that you have:
      • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.

      • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.

      • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
    2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

    The pilot and
    No symbols

    A down arrow
    by the driver

    Exclamation or
    question mark by
    the pilot

    No Apple Mobile
    USB device driver

    You don't see symbols next to the Apple Mobile Device USB Driver

    If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

    You see an arrow down

    If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

    You see an exclamation point or question mark

    If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

    You do not see the Apple Mobile Device USB Driver

    1. Disconnect your device from your computer.
    2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
    3. Reconnect your device to your computer.
    4. If you see one of these sections in the Device Manager, expand them:
      • Imaging devices

      • Other devices

      • Portable devices

      • USB Bus controllers

    Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

    If a single unknown device appears, follow these steps:

    1. Right click on the unknown device entry.
    2. Choose Properties from the context menu, and then click the Details tab.
    3. In the drop-down menu, select hardware IDS.
    4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
    5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
    6. Unplug the unit and remove all the USB devices on the computer.
    7. Shut down the computer, and then turn it back on.
    8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
    9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

    If you still need help, contact Apple technical support.

    Manually update the Apple Mobile Device USB driver

    If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

    1. Choose update driver software.
    2. Choose "Browse my computer for driver software."
    3. Choose "Let Me pick from a list of drivers for devices on my computer.

  • Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
  • Click Next. You should see the disk button.
  • Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
  • Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
  • In the disc window, click Open, and then click Next and then click Finish.
  • Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
  • Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

    • See you soon!

  • iPhone charge &amp; music

    I intend to buy the new iPhone. I was wondering, how would be possible to listen to music and charge your phone at the same time with the lightning only cable jack on the new iPhone 7 and 7 more?

    Thank you.

    Unfortunately, there is no convenient way to load and play music at the same time.

    You should probably use wireless headphones. This is what Apple wants you to do.

    Another option is annoying this thing with iPhone dock.

  • The connections to use

    Hello

    I recently bought a Mac Pro (end 2013) to a friend.  I am now running Windows via Bootcamp 10 and buy two of these Dell Ultrasharps U2515H

    http://www.warehouse1.com.au/ePages/shop.SF/secbecdbcd543/?ObjectPath=/shops/war products/ehouse1/000000000002951727

    These are non-thunderbolt screens and are 2560 x 1440

    Could someone please advise me on which are the best video connections/ports to connect these are?

    Thank you

    Ports and interfaces
    Integrated USB hub Yes
    Version of USB hub USB 3.0 (3.1 Gen 1)
    USB ports downstream Type amount has 5
    DVI port NO.
    HDMI ports quantity 2
    DisplayPorts quantity 1
    Mini DisplayPorts quantity 1
    Audio output Yes
    AC (power) in Yes

    If you need two cables, Mini DisplayPort / Mini DisplayPort (or [size] DisplayPort / Mini DisplayPort if these are cheaper).

    Which will cause the load down your hardware and you get the best resolution with less noise.

    You plug the ThunderBolt Mini DisplayPort end ports and they pick up the video subset that they need, a bolt of lightning regular cable is much more expensive and will not work.

  • New Ipod nano is not recognized on laptop

    Bought a new Ipod Nano (my old one fell; broken screen).  I have the latest version of ITunes on my laptop HP Envy.  My sync iPhone without any problem. my old ipod nano also syncs.  A did the device synchronization Tests. Results: No Ipod Touch, IPhone or Ipad found.  I can also scroll to the clock and the parameters of the IPod Nano. I need help from the community before I call Apple.  Thank you

    Hello pamelafromsonora,

    Thank you for using communities of Apple Support.

    According to your post, I see that your new iPod nano is not recognized by iTunes on your Windows PC, and you cannot scroll through the settings of the clock on your iPod. I know how it is important to ensure that you can connect your iPod to your computer/iTunes and use all the features. I'll be more than happy to help you with this.

    Use the article If iTunes does not your iPad, iPhone or iPod and follow these steps to see if iTunes recognizes the device, specifically these sections:

    When iTunes on your computer doesn't recognize not the connected device, follow these steps. Try again after each step:

    1. Make sure that you have the latest version of iTunes that works with your computer.
    2. Check that you have the latest version of the software on your Mac or your Windows PC.
    3. Make sure that your device is turned on.
    4. If you see a trust this computer alert, unlock your device and press trust. If you still see the alert, you may need to reset your lockdown folder.
    5. Unplug all accessories USB from your computer except for your device. Try every USB port to see if it works. Then try another USB Apple cable.
    6. Restart your computer and your iPhone, iPad or iPod.
    7. To see if your device needs service, try another computer. If you have the same problem again, contact The Apple support.

    If you are using a Windows PC

    1. Open Device Manager by following the steps for the version of Windows that you have:
      • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.

      • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.

      • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
    2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

    The pilot and
    No symbols

    A down arrow
    by the driver

    Exclamation or
    question mark by
    the pilot

    No Apple Mobile
    USB device driver

    You don't see symbols next to the Apple Mobile Device USB Driver

    If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

    You see an arrow down

    If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

    You see an exclamation point or question mark

    If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

    You do not see the Apple Mobile Device USB Driver

    1. Disconnect your device from your computer.
    2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
    3. Reconnect your device to your computer.
    4. If you see one of these sections in the Device Manager, expand them:
      • Imaging devices

      • Other devices

      • Portable devices

      • USB Bus controllers

    Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

    If a single unknown device appears, follow these steps:

    1. Right click on the unknown device entry.
    2. Choose Properties from the context menu, and then click the Details tab.
    3. In the drop-down menu, select hardware IDS.
    4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
    5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
    6. Unplug the unit and remove all the USB devices on the computer.
    7. Shut down the computer, and then turn it back on.
    8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
    9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

    If you still need help, contact Apple technical support.

    Manually update the Apple Mobile Device USB driver

    If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

    1. Choose update driver software.
    2. Choose "Browse my computer for driver software."
    3. Choose "Let Me pick from a list of drivers for devices on my computer.
    4. Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
    5. Click Next. You should see the disk button.
    6. Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
    7. Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
    8. In the disc window, click Open, and then click Next and then click Finish.
    9. Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
    10. Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

    Best regards.

  • Can I transfer data between a new MacBook (USB - C) to my iPad Pro?

    I have an iPad Pro.  I also have a new MacBook on command.  The new MacBook uses USB - C to 'universal' and data transfer.  Can I transfer data to/from my iPad Pro with a lightning bolt - cable USB - C?

    Thank you

    What kind of data you want to transfer?

    Files you can transfer with iCloud, Dropbox, box or Google Drive.

    You can transfer from your iPad to MacBook Pro by plugging the photos. They can be imported to the Photos for Mac.

Maybe you are looking for