Lightroom catalog could not be opened because (DxO) has already opened

Similar Questions

• Catalog could not be opened due to an unexpected error

  Guys good day, I wonder if you could help me get my lightroom catalog I accidentally erased it but was able to recover using recovery software. but when im trying to open it says 'catalog could not be opened due to an unexpected error' I never cried if strong for anything other than that, it's a 4 years worth of work although the raw files are still there, the 100 hours of editing have disappeared. could someone help me please. ?

  Try to recover your catalog from your last backup, some of the work will be missing then.

• Trigger line asked could not be booked because it is already in use.

  Hi, I am trying to export the markers PFI0 and PXI_Trig0 on NI5450 (in script view)

  by using the following code

  There are no errors when I set up by using the following code.

  commWrapper.ExportSignal (PXICommonGenWrapper.niFgenConstants.MarkerEvent, "Marker1", "PFI0")
  commWrapper.ExportSignal (PXICommonGenWrapper.niFgenConstants.Marker, "Marker0", "PXI_Trig0")

  When I run the script, I get the following error

  Trigger line asked could not be booked because it is already in use.

  Good: Terminal output event marker
  Target unit: PXI1Slot2

  State code:-89126

  Would appreciate any solution that allows me to configure the two triggers/markers. I use these markers to trigger another card PXI (NI5644R on PXI_Trig0) and an external piece of equipment (using the output of PFI0).

  Thank you.

  Hi Surya,

  Thanks for this posting on the community page. It tells you what this error, it cannot route a trigger to your destination requested because something else has already booked this trigger line. A pottential typo, this is your second order ExportSignal specifies niFgenConstants.Marker and not. MarkerEvent. It is a simple error to solve, but there are many possible sources. Is it possible for you to share the complete code with me? Or, perhaps you could arrange a join.me and I can look at your full installer.

• The catalog could not be opened because of an unexpected error.

  Help-

  I'm doing a new catalog for each photo project

  now, I can't open one of my most important (the last time July 4 open, last backup July 4)

  It would be tragic as there are has 2000 already published photos in it.

  Can you help me?

  I already tried to open a new. He worked

  I already tried to open others. He worked

  I read to reinstall lightroom 4 - did not what I'm worried about losing more files.

  Please help, urgent!

  Thank you

  With Lightroom closed. Go to your user_my photos_lightroom folder and see if there is a file with the same name as the catalog with a LOCKING .lock extension, if yes remove the file locking and you should then be able to open the catalog.

• Organizer of Photoshop: The catalog could not be opened because it is currently in use by another program

  Original title: Louise

  I think I can cut my computor while organizing photoshop was running. Now when I try to open an icon appears on the bar tasks with a noise of error. I can fly over the icon and it shows me my photos but I can't open, all I can do is to close. It was suggested to go to Task Manager and shut up there and the first time I tried this he showed that run and I closed it down. But I still can't open it and it shows is no longer in the Task Manager. I got a message

  The catalog cannot be opened because it is currently in use by another program.
  I tried the system restore to a time before this glitch.
  I have uninstalled and installed the program.
  How can I find where it runs when I can't find it in the Task Manager?

  Hello

  I suggest you to send your query to the Adobe community forum as they would be in a better position to help you with this question.
  http://forums.Adobe.com/index.jspa
  https://helpx.Adobe.com/Photoshop-elements.html

  Thank you

• My LR catalog will not be open since the last update

  Since the last update of creative cloud, I opened my LR catalog.  I have a PC running Windows 10.

  When I click on LR, a box pops up that says "the catalog could not be opened because of an unexpected error."  Then I have the choice to open a different catalog, or to create a new.

  I tried several thing:

  -J' selected ' create new ' thinking I could maybe create a new catalog, and then import the old.  LR refused to open the new catalog.

  -J' tried ' to open a different catalog.  I unzipped my last backup in a new folder and tried to open it.  I got the same error.

  I am at a loss to know what to do.

  Help!

  LR to uninstall then reinstall. Your catalog is a file separated which will not be deleted or altered in some way by doing this.

  Also default LR backup the catalog file once every week, unless you changed this setting normal or continuously select the jump key, unless you so a backup of the file catalog which has only 6-7 days.

  It is more than likely to a permissions problem that was caused by the update of Windows.

  To uninstall open office creative cloud application and uninstall it from there. Restart the system, and then reinstall from the same application.

  Or once uninstalled, you can go here to get the original version of LR 2015/6 and then apply the 2015/6.6.1 update.

  Install Photoshop Lightroom

  Download the original version and then jour.6.1 updated manually. LR CC 2015 and LR 6 are the same exact program and the difference comes from how you're signed in. So don't be confused if all you see is LR 6.x.x on the download link.

• Lightroom 5.6 error: the file could not be modified because Photoshop CC could not be launched...

  I upgraded to lightroom 5.6 recently and I use photoshop cs 6.

  My OS is windows 8 on i5 4670 with R280X gfx card 16 gb of ram

  After editing photo with lightroom, when I right click Edit in photoshop, immediately launch of photoshop, but the image is not imported into photoshop.

  After like 30 seconds a pop error message off saying "the file could not be modified because Photoshop CC could not be started".

  After another 10 seconds then the picture appear in photoshop... it becomes irritating for the me.

  
  

  If I select just open the original or a copy of the original, it works very well. It happens only when I try to open it with changes in lightroom.

  
  

  I had to uninstall/reinstall the photoshop and lightroom as well by removing all plugins, I had, but the problem doesn't go away.

  
  

  Another problem with lightroom 5.6 is the adjustment brush is slow and lazy, so it is unusable when I zoom using the adjustment brush.

  I have not had this problem until I upgraded. OMG

  
  

  does anyone have the solution to my problem?
  

  I upgraded to the latest version of ps cc 2014, problem solved.

  resemble cs6 I overwhelmed or something

• When I try to log in my Outlook Express, I get a message that could not be opened because MSOE. DLL could not be loaded

  OUTLOOK EXPRESS

  When I try to access my Outlook Express account a message appears that says: "Outlook Express could not be opened because MSOE." DLL could not be loaded. " -What this means and how can I solve this problem?

  This is usually because of folders.dbx be corrupted and you should remove it.  See www.oehelp.com/OETips.aspx#7

  In addition, it is the right time to save your messages, given that corruption.

  Steve

• When to install the old version of quicktime get error: an operation cannot be performed because a file handle could not be opened

  "On windows vista, that I am trying to install quicktime for windows 2.1.2 so I can run a program requiring but keep getting messages like" an operation cannot be performed because a file handle could not be opened.  Try to close applications or increase the number of files available (see order of FILES in your manual BACK". Or I receive QTINSTAL caused a GPF in module QT16 failure. EXE to 0002:5DA9

  Hello chris_660,

  You can check that the program that you try to run Windows Vista compatible by visiting the link below:
  Windows Vista Compatibility Center
  
  Also, you can try to run the program in compatibility mode and then check if the same problem occurs.

  Make older programs in this version of Windows

  Thank you

• Windows Mail does not open. It gives me a message saying, ' Windows Mail could not be started because MSOE. " DLL could not be loaded. »

  My Windows Mail does not open.  It gives me a message saying, ' Windows Mail could not be started because MSOE. " DLL could not be loaded. "How can I fix in order to regain access to my e-mail address?

  The only other thing I can suggest is to back up and then delete the following registry keys:

  HKEY_CURRENT_USER\Identities

  HKEY_CURRENT_USER\Software\Microsoft\Windows Mail

  I start with the first and then see if it works.  If this isn't the case, then delete them both.

  Steve

• "SQL Server 2005 Setup cannot continue because the installation package could not be opened."

  Hi, I use a 64 bit OS on my computer and I have a problem. AdminStudio gives an error message when running this program.

  "SQL Server 2005 Setup cannot continue because the installation package could not be opened. The installation package has a missing file, or you run a single installer 32 bit on a 64-bit computer. To continue, verify the SQL Server 2005, you use the package is supported on WOW64. If you are sure that you are running a SQL Server 2005 supported packages, and you continue to see this message, contact the vendor of the application. »

  What can I do about?

  Thank you!

  Hello again,

  Thanks, I solved this problem. This program installs 32-bit as the default value in the path of the folder. This is why it does not work when everyone works beginning... But there is a solution for this topic...

  Exactly the solution:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=22625

  Note:

  SQLEXPR32. EXE is a smaller package that can be used to install SQL Server Express on 32-bit operating systems only.

  The larger SQLEXPR. EXE package supports installation on 32-bit and 64-bit operating systems (WOW install).

• I get the following message appears when you try to open Photoshop... "Could not initialize Photoshop because an of.file - unexpected end has been detected. Help! You can use my Photoshop!

  I get the following message appears when you try to open Photoshop... "Could not initialize Photoshop because an of.file - unexpected end has been detected. Help! You can use my Photoshop!

  Hi romyb,

  End of file unexpected refer and let us know if this helps.

  Kind regards

  Assani

• I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.  And when I try to open a dng file, it comes up with "cannot be compl

  I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.

  When I try to open a dng file, it comes up with "could not complete your request because it is not the right type of doc.  Now I have "expansion of libraries could not be loaded because it was not properly signed.

  Any help would be greatly appreciated.  The program worked perfectly in the past.

  I contacted Support Adobe this morning, and they were able to solve the problem.  It was difficult.

• I have Adobe Creative Suite 5.5 Design Standard and I can't open Adobe Photoshop. A window pops up that says "could not initialize Photoshop because the preferences file was invalid (it was deleted)." All my other programs, such as Illustrator, are a

  I have Adobe Creative Suite 5.5 Design Standard and I can't open Adobe Photoshop. A window pops up that says "could not initialize Photoshop because the preferences file was invalid (it was deleted)." All my other programs, such as Illustrator, are able to open. Any help is appreciated. Thank you.

  Hello

  Maybe if you check Photoshop on the cover page of the victory 8 and choose Run as administrator from the options bar at the bottom of the page and then do the Ctrl Alt Shift.

  Kind regards

  Sheena

• I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  Hi soewandichan,

  Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

  Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

  Kind regards

  Tanuj