Lightroom showing blue screen when you modify an image [was: Lightroom]

Similar Questions

• Get the blue screen when you create a new message or the response message in OWA Exchange 2007

  Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/

  It will be useful.

• LifeCam is at the origin of the problems of "Blue screen" when you try to close?

  I get a blue screen when you try to stop, we have identified the "Lifecam can be the cause of the problem?

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, I understand that you get Blue Screen of Death, when you use Lifecam on Windows 7 computer.

  We're here to help and guide you in the right direction.

  I suggest you to consult the help article and check if it helps.

  Method 1

  I suggest you update drivers lifecam and check if this may help,

  Updated a hardware driver that is not working properly

  Update drivers: recommended links

  Method 2

  Visit the link mentioned for more information below.

  Resolve stop (blue screen) error in Windows 7

  Note: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Note: Reinstall Windows 7 will remove all the programs you have installed and restore the default settings of Windows. You will need to restore your user files, and reinstall all the programs you've installed using the installation disk or the original files.

  It will be useful.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• Blue screen when you install Windows XP on Touchsmart tx2z with pre-installed Windows 7

  I use the Tablet for a month or two, and I found Win 7 not this practice. I then tried to install XP (I used a SP3 disk at startup of the system), but the computer shows blue screen after loading some files and would not start the installation program. I don't know if XP downgrade guide works because I have not seen tx2z in the list. Someone has an idea? Thank you very much.

  Try to "slipstreaming" the driver SATA HERE decompress to a folder and use nLite to update your copy of XP and burn a new cd.

  This guide shows "slipstreaming" one driver SATA Intel, but the process is the same:HERE

  Daniel also has a pdf guide of AMD only "slipstreaming" at the top of the forum, if you need it... called "SATA Drivers for XP".

• Blue screen when you unplug the power of the computer dell laptop XP

  I have a dell latitude E6500... problems with blue screen when I unplug the laptop.  his past about 5 out of 10 times now.  Ive updated all recommended microsoft updates and it is still the case?  is there a driver for xp needed to solve this problem?  It only happens when I unplug the power cord and it happens as soon as I unplug

  Hello suncoastsrq,

  Usually, when we see problems during shutdown, the cause is something that loads at startup.

  To this end, I would recommend mode startup minimum troubleshooting as seen in the following articles:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  In addition, if we can get downloaded discharge, the community has access to them and will probably be able to determine the cause.

  You can download the dump Auggy's previous suggestion?

  Let us know.

  Best regards

  Matthew_Ha

• Blue screen when you perform the search for live TV in Windows Media Center on the new Lenovo A700

  I just got my new Lenovo IdeaCenter A700 yesterday and have been busy setting up.  The computer is equipped with a built-in TV Tuner and I tried to put in place the TV on it so I could watch TV on my computer.  I have RCN for cable and a cable TV that gets first plugged into the decoder and then I plug the cable to the TV - so I just plugged this cable on my computer instead of the TV.

  I used the following Web site to set up using Windows Media Center - http://www.howtogeek.com/howto/9166/learning-windows-7-setup-live-tv-in-windows-media-center/.  After that I put in my zip code he sought the power of the signal or something and then I got a blue screen.  To restart the computer the information below has been MS. error message This happened to me twice.

  Anyone know how to fix this? Or otherwise, I just want to use my computer to watch TV on, and if I can do this other method other than Windows Media Center free I am happy to do.

  Please let me know if you need more information.

  ************

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 4A
  BCP1: 0000000076E5FF2A
  BCP2: 0000000000000002
  BCP3: 0000000000000000
  BCP4: FFFFF8800AADECA0
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\102110-15849-01.dmp
  C:\Users\fennis\AppData\Local\Temp\WER-36941-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\System32\en-US\erofflps.txt

  This seems to be resolved now... it was maybe an update of windows, like when I rebooted my machine it updated automatically and after that he worked all of a sudden!

  Anyway, now it shows a black screen and no sound for all channels, but that is a different problem... and I'll look in to that.

  Thanks for your help.

• Blue screen when you create a new virtual machine from an acronis image.  ESXi 5.0

  I'm trying to create a virtual machine in my ESXi 5.0, from acronis backup.  The backup is W2003.

  The virtual machine is created, but when it tries to start on W2003, he quickly shows a blue screen for a second or two, then try to restart.

  I suspect that it is a hard disk driver, but I don't know how to correct it.    I couldn't see anything in the Bios of the virtual machine to select type of HD.

  This fixed my issue.

  Glad to hear that it works now. Even if VMware Converter 4.3 works, I would say that you are using the latest version of Converter for future conversions.

  André

  PS: Please consider to mark the question as answer. This could help other users with similar issues.

• Satellite C650 - blue screen when you try to install XP

  Hey,.

  For a kind of werid reason my disappeard just win 7 and now I try to install Xp.

  And suddenly, when the facility is good on start, I get blue screen.

  -Does anyone know why I get the blue screen and a possible solution to this problem.

  PS: The XP cd is not bought at Toshiba

  Can you please tell us which drive do you use? Is it perhaps original disc of Microsoft?
  Service pack?
  What is defined in the Advanced BIOS for compatibility, AHCI or SATA option?

  Give us more information please?
  The exact model name and model number can also be useful.

• Tecra 9100 blue screen when you disconnect the power supply

  Hi people,

  Im having a major problem, Ive had a major problem with my tecra 9100, when I unplug the power cable and try to use the laptop on battery, the blue screen comes up saying NMI: channel check / IOCHK

  then the computer shuts down, it restarts only properley if I plugged power of ext,
  also something to note, when I unplug everything first, he's not str8, its only when I try to use the laptop, which is pressing a key

  If someone knows something about this could you please let me know

  Thanks carl

  Hello

  This has been already discussed here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13784

  Check the sanremo poster, which refers to the knowledge base article Microsoft!

• Tecra A2 blue screen when you select the display settings tab

  Hi, I have a Tecra A2 Windows XP SP2 (and all of the updates in automatic mode). Only two months. When I go to display properties and click on the tab settings of the machine crashes with a blue screen. Have tried to reinstall the driver provided on the CD with the machine but makes no difference. I tried downloading a more updated to Intel driver but it says that it cannot install it. Any suggestions from anyone, please?
  Also (may be relevant but do not know) in device manager I have two default monitors list and two identical cards - which is how it should be?

  Hello

  Yes, to you on time. In the device under Graphics Manager, two graphics controllers appear. But it's not a fault.
  Also Toshiba recommend using the graphic drivers of Toshiba. In this case, you should visit Toshiba's pilot Web site, and you need to install the graphics driver from this site.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Check if, after this installation, the blue screen error message occurs

• Blue screen when you insert the DVD - M40X

  Hello
  I have a new computer laptop toshiba satellite M40x-183. (with DVD super multi)
  After ten days of buying it, I found a problem when playing some DVD and CD, when I insert the dvd I got a blue screen saying... There is an error and windows can stop harmful to your pc and I have to contact the support then start dumping from 100% to 0%...
  I have tried the dvd in many other dvd players and it works perfectly. Team support here told me that this type of dvd player are unable to process this format how it happens so that older toshiba and other laptop brands can do!
  Is there a solution to this?

  Hello

  Well, as the support service team say that the DVD player is not able to read this format.
  But I can't give you a good answer why it s not possible to play this DVD. It s a simple fact that there are many DVD and CD formats on the market and number of readers is not able to play some formats.
  Have you tried to play burn DVDs? I recommend you to test the DVD from other manufacturers. I use TDKs and it works correctly.

  Good bye

• Blue screen when you use the CD/DVD on Satellite L30-105 player

  I have a Satellite L30-105. Recently when using the CD/DVD drive, it began to crash (blue screen) after playing a DVD-video or a music CD.
  Either way, I seem to only get playback of DVD-video and not the main sound track. Does anyone have an idea what may cause these errors.

  Hello

  To my knowledge, the blue screen starts if there is a serious software problem or if some of the equipment is malfunctioning.
  I put t believe that this blue screen error message can be caused by a defective CD/DVD drive.

  Hmm, according to your message and you can not hear the main sound and cannot read music CDs, I think that this problem could be linked to the sound card.

  In the first case I recommend updating the audio driver. If this does not help, try to recover the laptop with the supplied recovery CD and check if the same thing always happens on the new BONES recovered. (Don t install any 3rd party application).

  Good luck

• Blue screen when you try to install Windows XP Home Edition on Satellite L350D-11 has

  Hello
  When I try to install Windows XP Home (including SP3) on my new L350D-11 has a blue screen after loading the drivers.
  When booting with Kubuntu Live CD (8.x) appears an error message: / sbin/modprobe out anomalous.

  At least I need Windows XP because of some programs that do not work under Vista. Is it possible to install XP?

  Hello

  Hmm I think the BSOD appears because you didn t add SATA drivers in the Win XP operating system.

  However, you can try to install Win XP on your laptop without the use of the SATA driver, but you can change the SATA AHCI in the BIOS in compatible mode.

  Check it out!

• Blue screen when you log in windows server 2008 r2

  When you connect in windows server 2008 r2, all I have is a blue screen and the mouse.

  I tried to search for solutions on the internet, then I found a microsoft patch "http://support.microsoft.com/kb/2590550" I have run the fix command line but he gave me nothing, no error or success messages.

  I tried to restart but I still have the same problem.

  Is there a solution to this problem?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Get the blue screen when you play a game (COD modern warfare 2), ID: 1044. At all the most recent drivers.

  This is part of the error code, if you need more just ask. (It's in Norwegian, but I guess you'd understand it anyway)

  Problemsignatur:
  Pa problemhendelse Navn: BlueScreen
  OS-versjon: 6.1.7600.2.0.0.256.1
  ID for nasjonal innstilling: 1044

  Tilleggsinformasjon om problemet:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA80082494B8
  BCP3: 0000000000000000
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  I have all the latest drivers, and no update is available in Windows Update. When I check the event viewer, it is said:

  System

  - Provider of [ Nom ] Microsoft-Windows-Kernel-Power [ Guid ] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  OpCode 0

  Keywords 0 x 8000000000000002

  - TimeCreated [ SystemTime ] 2009-11-16 T 12: 53:50.350843600Z

  EventRecordID 4618

  Correlation

  - Execution of [ ProcessID ] 4 [ ThreadID ] 8

  Computer:
  Motherboard:    ASUS P5E WS Professional
  Chart:           Sapphire Radeon HD 3870 X 2 1024 MB
  CPU:                 Intel Core 2 Quad Q9450
  RAM:                 OCZ PC2 - 6400 Platinum Vista PErformance Edition 8 GB (4 x 2 GB)
  Power:             Power PC & Cooling Silencer 750W

  Nothing is overclocked, and my cooling system is running on max, never had a problem with the heat.

  So what is the power of the nucleus, and why he will enter the blue screen only when I am games? And most importantly, how do I do?

  Thanks for the replies!

  sweppes

  sweppes,
  It was just a possibility that heat is a problem.  Also in your games if you operate in high res\max video settings you can turn them down to smaller settings and test.

  You also mentioned that the motherboard has not yet all drivers for Windows 7.  Maybe it's that you will have this kind of problem until you get correct chipset drivers.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.