Like Imager Wininstall BootCamp USB key

Similar Questions

• Burning an ISO image to a USB key?

  Greetings,

  I have an ISO image that I want to burn it on a USB key that I would use to start a PC. However, I have found no tool to do. Any help would be appreciated.

  Jean-Pierre

  Everyone,

  The following utility has worked very well for me:

  Universal-USB-Installer - 1.8.3.7

  I downloaded from:

  www.pendrivelinux.com

  Then I downloaded a Linux. ISO image, created the bootable USB key with the utility above, with the. ISO image and then put to the test.

  I can run Unix Ubuntu from a USB key bootable containing the operating system on it.

  I like windows, especially Windows 7, but issues of security and business needs, well I'm Linux as an alternative to explore, rather than just Apple, which they say is unhackable. Laughing out loud!.

  Kind regards

  Jean-Pierre

• How can I create a system image on my USB key?

  I just bought an asus ux31a screen touch new with windows 8.  I want to create a backup so if my hard drive fried or my windows 8 is totally messed up, I can restore everything.

  I don't have a cd drive on my ultrabook.

  So, I assumed that what I had to do was to create a system image on a flash drive, I stuck in one of my usb ports.  I chose my "disk removable disk D:" which is my 16 GB flash drive (seems only 14.93 GB is however useable).  He first told me that my drive needs to be formatted in NTFS.  So I did it.  Now it is said that it is not "a valid backup location.

  What I am doing wrong? Thank you.

  Hello

  Control Panel - recovery - create a recovery disk

  Control Panel - Action Center - recovery - create a recovery disk.

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to create a recovery USB in Windows 8
  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• the system image on the 256Go USB key

  Hello

  I can create system image to 256Go USB key

  You do a backup? If so, yes it will work just fine.

  Do not expect to boot from it and use it as a main drive.

• Pavilion 500 t - not accessible when starting from CD USB key

  I am booting from a CD on my Pavilion 500 t to restore an image from a USB key.  I can boot from the CD fine, but after loading, my recovery (Ghost) software my USB key is not accessible.  Any ideas?

  Hi Steve,.

  Please report the number of HP for your PC product.

  How to find the model number of HP and the HP product number or leave model number HP automatically find your PC and HP network attached printers.

  You say that the ghost can not find the USB? If Yes, then try a USB 2 port.

• can I have multiple images on a simple USB key?

  I would like to save an image of my T400 (XP), then upgrade the hard drive for an SSD, then upgrade the operating system to Windows 7 (or 8) and take another picture.

  I have several questions that I hope someone can help me with...

  • Can I use Rescue and Recovery to save several images on a simple USB key?
  • If so, how the sw keep separate files?
  • Will it still work if I use two different versions, Rescue and Recovery, (4.3 for XP) and 4.5 for W7?
  • Is there a way to store images in separate folders on the USB, or which is not necessary?
  • Is there a better way to do it (including using different sw)?

  Thanks in advance,

  Ron

  If you open disk management, you will see Disk 0 with more than one partition. If you want to regenerate a HD in return the same you'll want all or at least two partitions. You will notice the boot partition Active is not C Windows player, but a partition called System_Drv (at least in my system). These two will be required when you image a new drive. Otherwide you will have a fixation with external tools to start.

• How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?

  * Original title: Windows 7 - CD to USB

  I bought Windows 7 (the two CD 32 & 64) many years for use on my early 2008 MacBook Pro, with an optical drive, via BootCamp. It worked very well.

  Now I have a new MacBook Pro without optical drive, but would like to install BootCamp and use Windows again.

  How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?

  Thanks in advance for your help.

  Use Rufus:

  Rufus - create USB bootable the easy way discs

  Another solution:

  http://www.AddictiveTips.com/Windows-tips/create-bootable-Windows-7-USB-flash-drive-from-DVD-disc/

• I would like to add a folder of photos on a USB key for time machine backups

  I have a new time capsule, and I am attaching a USB hard drive that previously held some my time machine backups and all my photos. I would now add the photo of backups auto time folder machine on the time capsule. But in time machine preferences I don't see the folder or the USB key. Although I can see the USB in the finder as well as the time capsule window. I can copy and paste the photo time capsule file it's just I wanted to time machine for backup for me. Any help much appreciated.

  The time Capsule is what we call a 'network' of the road, so when the USB is connected to the time Capsule, which would make it a "network" drive as well.

  Unfortunately, Time Machine is unable to back up a 'network' of the time Capsule drive.

  If you want to save the data or the USB disk using Time Machine drive, you will need to connect the drive directly to your Mac and then it will be saved with your Mac... assuming that the drive has been formatted for Mac to Mac OS extended (journaled) format. Then, the player will become a "local" drive

  If you need to keep the USB connected to the time Capsule, the only way to back up data automatically on a schedule would be to use a commercial program like Carbon Copy Cloner or ChronoSync.

• Burning an ISO image to a bootable USB key?

  Hello, I have an ISO image that I want to burn it on a USB key that I would use to start a PC. However, I have found no tool to do. Any help would be appreciated. Jean-Pierre

  Hello, I have an ISO image that I want to burn it on a USB key that I would use to start a PC. However, I have found no tool to do. Any help would be appreciated. Jean-Pierre

  Follow the instructions for the method #2 in the link below. It worked for me.

  http://www.bootdisk.com/pendrive.htm

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I'm not trying to run either on the USB key, I just need to know how to install from a USB key. I tried Multiboot, grub for DOS and other, but they do not seem to work :/

  I am going through a book that uses these two to form Microsoft MCITP: Server 2008 Administrator and if I could install these Via USB, this would save my records and a lot of hassle... basically just for convenience, as everything that I need will be on a stick * lol *.

  Otherwise, I'll have to use discs instead :)

  Take a look at this:

  http://www.Haiders.NET/post/installing-Windows-Server-2008-from-a-USB-Flash-pen-drive.aspx

  Like to make a bootable USB with WIndows 7, take a look to use the following:

  Download Windows 7 USB/DVD tool

  http://store.Microsoft.com/help/ISO-tool

• If you like a challenge? Weird USB problem, he does not see my own USB key, but he sees another USB, but on other computers - it - see my USB key! P.S., Already tried a lot of solutions (unemployed). I'm an ITer.

  Hey there.

  I have the weirdest problem ever. I have a computer that does not see my USB, other computers but do not see my USB.
  Now, we tried another usb key (with usbstick I mean a ^_^ usb flash drive) and he DOES not see that stick! My own stick is a SANDISK Cruzer without U3, just ordinary storage 8gigs. None of the firmware see-as-CD. And the other was a different brand, but I don't remember.

  I also tried to plug a very specific device (A P2000 keystrokes recorder, it is a device that recorded incidents, I work for the firedepartment/police/ambulance and it records events), but he doesn't know that aswell of device, as if it has never been plugged in (we have installed the correct drivers for it).

  Now, I did some standard troubleshooting (check drivers, drivers of reupdating) and I removed all the usb drivers, restarted, drivers were back as usual, is not yet connect mine but it connects the other stick. My usb key works perfectly well with all computers but this one (same for the recorder to P2000), reupdated and installed, checked and stuff. Ports SHOULD work.

  I would appreciate help! Thank you!

  P. S.
  More info; It does not take into account the USB and connects anything, even the little blue light inside the usb key does not illuminate. Its as if she was never plugged on. The other has worked flawlessly on the same port, however. And my USB works on other computers. (Ditto for the P2000, but is not on the P2000.)

  P.S.S.
  I guess my computer-type is too relevant?

  Its a HP Compaq dc7100 Small Form Factor.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=NL&CC=NL&ContentType=SupportManual&docIndexId=64255&prodTypeId=12454&prodSeriesId=410112&lang=NL&CC=NL
  All the statistics are there.

  Hello

  We concluded that the PC was actually broken. (He suddenly begins to restart and stuff randomly gave away.)

  .. Third PC in a line that falls down and breaks down...

• How to restore a backup made via the Dell USB key Solution?

  I have a backup on an external disk created with the Dell USB key Solution and takes the name 05-01-2012_135210_Backup and looks like this:

  Directory of E:\05-01-2012_135210_Backup
  05/01/2012 17:21

  .
  05/01/2012 17:21 ...
  05/01/2012 17:21 APPS. INP
  05/01/2012 APPS_0000.INP 942 17:21
  05/01/2012 APPS_0001.INP 1 449 984 17:21
  05/01/2012 17:21 3 713 788 DATA. INP
  05/01/2012 17:21 949 160 DATA_0000.INP
  05/01/2012 16:59 DATA_0001.INP 650,996,224
  05/01/2012 17:00 DATA_0002.INP 650,377,728
  05/01/2012 DATA_0003.INP 650,780,672 17:01
  05/01/2012 DATA_0004.INP 650,156,544 17:01
  05/01/2012 DATA_0005.INP 650,135,040 17:02
  05/01/2012 17:03 DATA_0006.INP 650,592,768
  05/01/2012 17:03 DATA_0007.INP 650,867,200
  05/01/2012 DATA_0008.INP 650,413,568 17:04
  05/01/2012 DATA_0009.INP 650,225,152 17:05
  05/01/2012 DATA_0010.INP 650,678,272 17:05
  05/01/2012 17:06 DATA_0011.INP 651,130,880
  05/01/2012 17:07 DATA_0012.INP 650,716,160
  05/01/2012 DATA_0013.INP 650,323,968 17:08
  05/01/2012 DATA_0014.INP 650,544,640 17:08
  05/01/2012 17:09 DATA_0015.INP 650,903,552
  05/01/2012 DATA_0016.INP 650,121,728 17:10
  05/01/2012 DATA_0017.INP 650,273,280 17:11
  05/01/2012 DATA_0018.INP 650,703,872 17:12
  05/01/2012 DATA_0019.INP 650,381,824 17:13
  05/01/2012 DATA_0020.INP 650,613,248 17:13
  05/01/2012 DATA_0021.INP 650,506,752 17:14
  05/01/2012 DATA_0022.INP 650,527,744 17:15
  05/01/2012 DATA_0023.INP 650,539,008 17:15
  05/01/2012 DATA_0024.INP 650,273,792 17:16
  05/01/2012 DATA_0025.INP 650,347,520 17:17
  05/01/2012 DATA_0026.INP 651,014,656 17:17
  05/01/2012 DATA_0027.INP 650,540,544 17:18
  05/01/2012 DATA_0028.INP 478,608,896 17:21
  05/01/2012 include.xml 2 281 350 17:21
  05/01/2012 migr.xml 1 330 286 17:21
  35 file (s) on 18,053,022,754 bytes
  2 dir 607,587,577,856 bytes free

  I was not able to complete the full implementation of the solution Dell Direct USB key due to various problems.  .    Dell ended up sending me a new Windows 7 HARD disk image.   I have now the laptop up and running again with Windows 7 and have various applications installed.   That's all pretty well.  But now how do I get my data files restored?   Basically, I want to connect the external drive to backup and complete step 19 of the solution, as described below.

  
  Here are the steps OS using the Dell USB key: 
  
  1. Boot from the Direct USB Key by tapping F12 at the Dell logo, then select the
  USB Memory Key option from the boot device menu. 
  
  2. Accept the Dell End User License Agreement (EULA) by clicking the box next to
  Accept, scroll down till the end of the license agreement and then click on
  continue. 
  
  3. On this screen, the usb key gives an overview of the process it is about to
  perform, click continue when ready to proceed. 
  
  4. The Smart Repair solution runs a surface scan on the system to identify any
  errors with the boot record or the startup files. If any errors are found, they
  are automatically corrected. 
  
  5. Once the process completes, there will be an analysis summary, in this case,
  there is no issue found by the smart repair, click continue. 
  
  6. In this window the user can select what data they would like to back up, they
  can either go with the default backup solution or they can click select more to
  select more files for backup, click continue after selecting files for backup. 
  
  7. If user clicks on select more, they will get the screen below, they can go
  ahead and select the necessary data for backup by checking the box next to the
  respective folder, sub-directories are selected by default once the root folder
  is selected. 
  
  8. The user will be prompted to attach a USB hard drive to the system, user
  needs to connect the USB Hard drive at this point and click continue. 
  
  9. Once the solution detects the USB hard drive , it goes ahead with file
  backup. 
  
  10. Once the files are backed up, the solution will back up the user personal
  settings. 
  
  11. The Direct USB Key displays a summary of the data and personal settings
  backup. Click continue. 
  
  12. The Direct USB key then proceeds to install the operating system image on
  the system. 
  
  13. Once the operating system image is transferred, the drivers are also
  transferred. 
  
  14. After the operating system image and driver transfer, a summary page comes
  up giving the user information as to what process was performed successfully and
  what failed. The user needs to remove the USB key at this point and click
  restart. 
  
  15. The system restarts and comes to a flash screen on recovery and restore. 
  
  16. After the flash screen, the applications start installing. 
  
  17. Once the applications are installed, the user would see a summary screen
  informing them that the Operating system has been restored, connect the Direct
  USB Key and click restart. 
  
  18. After the restart the user will be prompted to connect the data backup hard
  drive and then click continue. 
  
  19. The files and personal settings are then restored from the USB backup drive. 
  
  20. After the files are transferred the system comes to the desktop with a pop
  up window informing the user to check the device manager for any exclamation
  marks, the tool also guides the user to download the drivers from the support
  site and the applications from My Dell Downloads and Dell Digital Delivery. User
  needs to select the check box to prevent the message from being displayed again
  and click close. 
  
  =============================================
  
  What program/utility can be used to run step 19  to restore my data?
  

  Thanks in advance!
  

  The Windows Migration utility (MigRestore) was obtained from Dell, decompressed and Support execution of data taken with the backup restore.

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Download USB key or camera.

  Why can't I download images from my camera or USB key.  Never had a problem until lately.  It "is like the port is dead and does not recognize anything.

  Hi GlendaFerguson,

  1. have you tried to use the USB key or camera on a different usb port and in another computer?

  2. what happens when you use other usb on the same USB devices?

  3. you receive an error message/code?

  4. What is the number of brand and model of the computer?

  This problem can be caused if the USB is corrupted or Windows cannot find the necessary drivers for the device. I suggest you to refer to the methods and check if it helps.

  Method 1:

  Run the hardware troubleshooting tool. Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

  Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, type Device Manager in the start search box and press ENTER.

  (b) expand Bus USB controllers.

  (c) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (d) restart the computer to reinstall the USB controllers automatically.

  (e) connect the removable USB storage device or camera and perform a test to ensure that the problem is solved.

  Method 3:

  If the problem persists, see the article help.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  See the following Help article and check if it helps.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  (Also applies to Windows 7)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Export a catalog of laptop-&gt; USB key... several subfolders handling

  I have a catalog on my laptop with a bunch of subfolders, like this:

  TRAVEL PHOTOS

  1 - London

  2 - Paris

  3 - Madrid

  ... a * group * of these!

  I am trying to export the catalog and move all the. Cr2 files on a USB key in order to merge it with another catalog and archive it on my main PC.   However, whenever I export, the catalog on the USB drive still made reference to all on the first hard disk image files, so I have a small exclamation mark errors in metadata on the thumbnails when I open the catalogue exported on HomePC.

  Lightroom's smart enough.  If I show where ONE of the images are, he finds OTHER IMAGES * in the same folder *.    It's great... but this does not solve my problem completely because there are like 18 subfolders.   I really don't have to do 18 times.

  THE QUESTION: Is it possible I can move/export entire * subtree * without having to learn Lightroom 18 times where each subdirectory is?

  Thank you!

  PS - I have NOT checked 'export negative files' because I assumed this will create DNG... and I'd rather just keep the CR2s and XMPs I already have with subfolders that I already have. (maybe I use this wrong?)

  PS - I have NOT checked 'export negative files' because I assumed this will create DNG... and I'd rather just keep the CR2s and XMPs I already have with subfolders that I already have. (maybe I use this wrong?)

  It is exactly what you need to do.

  It won't move the RAW files, it copy to the target, USB in your case.