Limitation of Deskjet 6840 print with mac OS 10.6.8

Similar Questions

• DeskJet 3050 has with Mac Ibook

  One month there has been no problem with Deskjet 3050 a with Mac Book Pro.  Now cannot print Pages.  Have done all the troubleshooting recommended by HP.  Printer's default; the supplies are good.  The printer is idle.  Have you tried both wireless (that worked before), and now with a usb connection.  Have spent more hours trying to correct.  Problem started with very slow printing - couple of lines, stops and then repeat until the page is done.  Now does not print at all.  Help.

  Hi again!

  I have a few suggestions that will work if everything goes well for the printing problem. Before attempting any software below, please make a copy or two out of the façade of printers to test the equipment. If the copies appear to work correctly, continue with the steps of software!

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Install the driver full features here: HP Deskjet full feature software and drivers - Mac OS X 10.6, OS X 10.7, OS X 10.8

  Try to print from where ever you and also try printing of text editing. Let me know the results!

  Best wishes to you, I hope this helps

• Anyone successful printing with mac by HP office jet 6500 has more?

  Hi all

  My HP office jet 6500 has found a router and is connected wireless (so has IP too).

  My mac (os 10.7) added printing

  OfficeJet 6500 E710n-z

  After

  Configuration (configuration of the device).

  But when I tried to print in the text editor says "printer not responding".

  In

  http://support.HP.com/us-en/document/c00041866

  I can't find HP office jet 6500 has more in the list of the available network all-in-one printer.

  Any comment is appreciated.

  Thank you

  Hi dnamkr,

  Have you also tried to scan from your Mac? Similar problems with it?

  I wonder if it could be related to the router, you have the Officejet and Mac connected for not totally supported Hello (mDNS/Multicast).

  What you can try is first to add the printer via IP. Open on your Mac system preferences and then go to print & fax. Click the Plus sign icon to add a new queue of the printer. Then choose IP - protocoll choose HP Jetdirect taken and then insert the IP address of the printer in the address field and add the printer. Now try printing with this new created printer queue.

• 5520 HP does not print with Mac 10.7.5

  Hello

  I have a wrong setting to the top of my 5520 new after my 5510 went kaput!

  I downloaded the drivers and have reset both the printers on the MAC and printer.

  I removed and redownloaded few times.

  When I try to add the printer, the MAC doesn't seem to see my son in the other room printer and not mine!

  Initially, I was able to print when first purchased last month but not with airprint and turn all the time the printer. I was trying to solve this particular problem, and now I can't print anything except gibberish.

  Now, all the printer will print (when it is printed) is strings and strings of computer-speak. HELP... Please! I use 5 HomeHub BT as a router...

  Hello TraiJay,

  Welcome to the HP Forums!

  For starters, it sounds as though that there could be a small mixture upwards in the Mac software of the printer. So a rule I always followed is to ensure that all software are completely removed, and the computer cleaned the printer software.

  The first step will be to uninstall the printer software. I've included the document "uninstalling the printer software. If you still see the Photosmart 5510 still on the list, please ensure that it is also well uninstalled.

  Once the uninstall is complete, the next step is to check and fix permissions of Mac disc. I've included the document '12.x disk utility: repair disk permissions'. Verify and repair disk permissions has finished. Please completely off the Mac for a minute and the Mac is restarted.

  The next step is to install the software. I've included the link to "HP Photosmart full feature software and drivers - Mac OS X 10.6, OS X 10.7, OS X 10.8. As soon as the software has finished downloading, open the software and follow the instructions on the screen for the installation.

  Please make sure that if you are able to install the software correctly, you click on the Apple icon and search for the software updates.

  The installation software sees your printer? You are able to install the software correctly? When you try to print now, is it always felt strange text?

  Thank you.

• HP Deskjet 1280 printing program (Mac)

  I'm doing some impression of photos using my my Macbook Pro (OSX 10.6.8). Deskjet 1280

  I installed the driver from here... http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=439174&p...

  Later a HP have is 10.6.5 - I guess it should work with later versions. I installed what went well.

  In printer "Driver" preferences, "Generic PCL Laser Printer" has been selected. With this selecetd, I could only print in B & W.

  I tried to look for Deskjet 1280 in the drop-down list pilot but he wasn't there. The closest I could find was HP Deskjet 1200 C - v5.2.3 Glentenprint.

  I tried printing with it and it prints in color. However, when I go to print, there is no options to select the type of paper, printing etc. The qulity that comes out is low.

  Any help would be greatly appreciated.

  Thank you

  Hello

  The pilot below 10.5 and below.

  Officially, the unit is therefore more compatible with the new version of the OS.

  The 3rd party Gutenprint printer driver does not support the specific printer.

  However, you can try the 3rd party HPIJS print driver that support your printer. That's why should provide more detailed options and a better quality.

  Below you can download HPIJS and find the installation instructions:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs

  Kind regards

  Shlomi

• Printing with mac vmware problem

  Hello

  I looked around in the discussions, but not found anything specific, sorry if this has been covered a lot before.

  I try to print with my host of XP in Fusion 3.0.1 mac printer.  Printers on the mac appear as XP printers and printing on them does not work.  The icon for the printer appears in the XP taskbar for 2-3 seconds then disappears.

  The problem is probably that printers on mac are actually themselves remote - these are versions of a printer on an airport extreme outside on the wlan.  But it has worked a certain time, return at some point.  I have not used XP to print for a long time.

  Running os x 10.6.2.

  Any help appreciated, thanks.

  Bill

  Hi billn,.

  Here is an article in the knowledge base for troubleshooting printer problems: http://kb.vmware.com/kb/1014535

  If you are not able to get the impression with this article, I have a few questions.

  You can print successfully to these printers using the Mac?

  How do you have printers in Windows? You use printer Passthrough, or you have the configuration of printers as printers network in the comments?

  Eric

• All-in-one DeskJet 4625 and printing with Mac OS 10.9 Maverick

  I just installed Maverick - Mac OS 10.9 - and print is no longer a device all-in-one DeskJet 4625.  The computer and the device are communicate since I can see the ink levels, scanner and other functions, but it will not be printed.  I know that there is no problem with the printer, since I can print to it from another computer that has installed Mac OS 10.8.  Apparently, there is a need for an update of the printer driver.  Apple support is not an updated driver.  So, my question is hp will provide an updated driver?  And when?

  Hello

  Apple provide a updated driver.

  First restart your Mac, then click on the Apple icon and select software update, do not forget to install any available HP or Apple updates.

  If you can't print, try installing the package from the link below and check if this is useful, although it does not list the Mavericks, it should work on the operating system as well:

  http://support.Apple.com/kb/dl907

  Shlomi

• HP F4480 does not print with Mac (OS 10.9 / Mavericks)

  I applied the instructions to configure the driver on my Mac and it appears so when I try to print something, but nothing prints when I click on print and nothing appears in the queue.

  Has anyone else had this issue / know how to fix?

  Thank you

  Hi melaniehuynh,

  Thank you for visiting the Forums from the HP Support! I see you tried to add your HP Deskjet F4480 your Mac running the Mavericks 10.9.4, operating system when you try to print nothing happens it won't in the print queue.

  Because you use the Mavericks OS X, you must install the printer using the Apple updates. Please click on the link below, this document explains how to install the printer driver on a Mac for a USB or network connection. The pilot of Mavericks v10.9 OS X for your printer is available through Apple Software Update (ASU). In addition, you can perform printing base with AirPrint without installing a driver.

  V10.9 OS X Mavericks: installing and using the printer on a Mac

  I want you to discover the fair section of the above document, make sure that you have installed correctly.

  Once you have installed the F4480 DJ, you will notice perhaps features that you had once are limited or there are solutions, for scanning with or without seeing software HP below:

  How to perform a scan: OS X v10.9

  I hope this helps!

  Thanks again,

• HP Deskjet 690C: HP Deskjet 690C printing with only the black cartridge?

  I have an old deskjet 690C I have a while to use it. So since I need to print only the text is it possible to install only the black cartridge and print as ink backup? Also are there drivers for windows 7 64 bit? And finally this printer works with a parallel to usb on a modern PC adapter?

  Thank you

  According to me, the Deskjet 690C requires both cartridges to be present for printing, although you might have a cartridge empty color installed.  The 'ink backup mode' feature was added later at the 690c Deskjet printer.

  There is a Windows 7 x 64 driver through Windows Update, see the image below.

  Regarding the USB-parallel converters, these can be problematic.  The models in the posts here have been verified to work on Windows 7 x 64 by users in the forum.

  

• Hello, where can I get the driver for my HP Deskjet 3050 works with Mac OS Lion 10.7.2?

  Hello

  I bought a HP Deskjet 3050, and it seems that the drivers are not compatible with my MacBook Pro under Mac OS X (10.7.2).
  How can I solve this problem?

  Thank you very much!

  Stephan

  Hey Stephan.

  Directly connect the device with USB
  Download and install the full software features below:

  http://FTP.HP.com/pub/softlib/software12/COL39593/DJ-96583-5/HP_Lion_Ink_SW_v12.13.17.dmg

  Make sure you select the software recommended HP and follow for configuring USB or wireless installation.

  After completing the installation, make sure to install any update available HP by clicking the Apple icon , then software update.

  Please let me know of any questions,

  Shlomi

• DeskJet 6122 print with only black print cartridge?

  I had this oldy but goody through local Freecycle (with two sets of ink!) list after knowledge full it works under Linux and openprinting.org it lists as working perfectly. Plug and play installation with Ubuntu, instantly recognized 14.04.

  I think it is indicated only by old-school print/head of cartridge type, but I should be able to use it with the black cartridge only right? I know most recent will force you to have both. I love that the cartridge for the price are very economical too.

  The Deskjet 6122 requires a black cartridge and electric sound color must be installed in the printer to print.  It is not necessary to have ink in all colors, but both cartridges must be installed.

• E-all-in-one printer, HP Deskjet 3520: HP Deskjet 3520 printer with black cartridge 364

  I tried to insert a 364 black cartridge in the printer. The 364XL black fits perfectly, but the 364 ordinary cartridge seems to be too narrow to fit.

  Am I stupid? Is there a technique for the Assembly of the 364 cartridge?

  Help please.

  The regular black cartridge must be installed in the center of the space, with an equal distance on each side.

  

  Additionally, make sure that you use the black cartridge 364 (with the symbol of the Pentagon) rather than the Photo-364 (with the butterfly or butterfly knot symbol).  The photos below show the 564 cartridge, but is the same for the 364.

  364 black cartridge has a Pentagon on the cartridge but a circle on the box...  The Photo cartridge has a butterfly on the cartridge and a camera on the box node.

  Figure: Ink cartridge Photo with the camera logo

• Problem printer with Mac p2055sn

  I run mac os 10.5.8, to connect through a router.  My usb printer p2055dn (connected to router) will not print. I get a message of offlin in the print area.  Other computers in the earlier fine print on OS House

  If it is connected through USB

  If so, try plugging the USB directly on a free port on your Mac.

  Enter in the system preferences Print Fax, remove your printer and add it again by clicking on the sign more

  If the question remains without change, click right (CTRL + left on your Mac keyboard) the field of printers, and then click Reset Printing System.

  * Be aware, it will remove any existing queue

  Now add the printer by clicking on the sign more and try to print.

• DeskJet 3070 printing with cartridges installation

  I installed a printer HP Deskjet 3070 for a neighbor. During installation, I used cartridges HP 364 'standard' instead of the cartridges 'setup '. The installation program continued--I've learned since. I installed now the cartridges 'setup' and that you have now configured the printer successfully.

  Can you tell me if we continue using the installation as usual - print cartridges until they are empty or need to change standard cartridges now?

  On the subject of standard cartridges, we have not been able to the caps on the top of each cartridge. Our concern is that they can dry and be unusable. Do you know how long (very roughly) the cartridges last if they are not stored in this way. Should we switch to the standard cartridges now rather than waiting the implementation empty?

  continue to use your cartridge installation first and when they will be empty use the cartridges 'standards', if the CAP custom fit more on the 'standard' cartridges put them in something sealed so that they don't dry out until you need it.

• HP Photosmart C4580 does not print with Mac Book 10.5.8

  I tried all the "solutions" made the HP Support.   When I click on the HP Photosmart C 4500 series icon, it says printer is connected but 'lazy '.  Honestly, I disconnected and reconnected everything.  I added no and added the printer.

  I tried all your advice and directions to troubleshooting in the manual.

  Finally, I tried pressing the x button and the ok button on the control panel.   He printed things on my queue.

  Can't imagine why it worked, but it did.  Yay!

  I want to thank you for taking the time to help me.   Katie