Problem printer with Mac p2055sn

Similar Questions

• Problem printing with Xerox printer

  In my new computer with Windows 7 Professional, I installed a Xerox Phaser 7750 DN. drivers of the printer that DVD is installed. I have no problem printing with fran to Word documents, Excel and Photoshop, but when I print from Indesign and PDF only half of the A4 document is printed. How can I solve this problem?

  Try the Global Print Driver (second link) on this page...

• Printing with mac vmware problem

  Hello

  I looked around in the discussions, but not found anything specific, sorry if this has been covered a lot before.

  I try to print with my host of XP in Fusion 3.0.1 mac printer.  Printers on the mac appear as XP printers and printing on them does not work.  The icon for the printer appears in the XP taskbar for 2-3 seconds then disappears.

  The problem is probably that printers on mac are actually themselves remote - these are versions of a printer on an airport extreme outside on the wlan.  But it has worked a certain time, return at some point.  I have not used XP to print for a long time.

  Running os x 10.6.2.

  Any help appreciated, thanks.

  Bill

  Hi billn,.

  Here is an article in the knowledge base for troubleshooting printer problems: http://kb.vmware.com/kb/1014535

  If you are not able to get the impression with this article, I have a few questions.

  You can print successfully to these printers using the Mac?

  How do you have printers in Windows? You use printer Passthrough, or you have the configuration of printers as printers network in the comments?

  Eric

• Problem printing with HP OFFICEJET PRO8500A PREMIUM

  I have to print certain documents yesterday, disappeared for a few hours and pick up where I left off.  When I went to print my document following that nothing happened.  He entered in the queue of the printer but would not print and I don't have the error messages.  Everything seems normal.  I'm so frustrated that I left it for today and still no luck.  I turned off printer and computer then again hoping that would work.  Disconnected and plugged.  At this point, I don't know what else to do except call this 'thing' in my frustration.  Help!    I have a laptop that printed fine.  What the devil.

  Hi cj727,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear you are having problems printing from the computer. If I can better help you, please answer with an operating system that you are running.

  Operating system Windows am I running?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  If you are actually using a Windows operating system, you can try to run the HP print and Scan Doctor.

  Please let me know if I can offer assistance more.

  Thanks for your time.

• Anyone successful printing with mac by HP office jet 6500 has more?

  Hi all

  My HP office jet 6500 has found a router and is connected wireless (so has IP too).

  My mac (os 10.7) added printing

  OfficeJet 6500 E710n-z

  After

  Configuration (configuration of the device).

  But when I tried to print in the text editor says "printer not responding".

  In

  http://support.HP.com/us-en/document/c00041866

  I can't find HP office jet 6500 has more in the list of the available network all-in-one printer.

  Any comment is appreciated.

  Thank you

  Hi dnamkr,

  Have you also tried to scan from your Mac? Similar problems with it?

  I wonder if it could be related to the router, you have the Officejet and Mac connected for not totally supported Hello (mDNS/Multicast).

  What you can try is first to add the printer via IP. Open on your Mac system preferences and then go to print & fax. Click the Plus sign icon to add a new queue of the printer. Then choose IP - protocoll choose HP Jetdirect taken and then insert the IP address of the printer in the address field and add the printer. Now try printing with this new created printer queue.

• 5520 HP does not print with Mac 10.7.5

  Hello

  I have a wrong setting to the top of my 5520 new after my 5510 went kaput!

  I downloaded the drivers and have reset both the printers on the MAC and printer.

  I removed and redownloaded few times.

  When I try to add the printer, the MAC doesn't seem to see my son in the other room printer and not mine!

  Initially, I was able to print when first purchased last month but not with airprint and turn all the time the printer. I was trying to solve this particular problem, and now I can't print anything except gibberish.

  Now, all the printer will print (when it is printed) is strings and strings of computer-speak. HELP... Please! I use 5 HomeHub BT as a router...

  Hello TraiJay,

  Welcome to the HP Forums!

  For starters, it sounds as though that there could be a small mixture upwards in the Mac software of the printer. So a rule I always followed is to ensure that all software are completely removed, and the computer cleaned the printer software.

  The first step will be to uninstall the printer software. I've included the document "uninstalling the printer software. If you still see the Photosmart 5510 still on the list, please ensure that it is also well uninstalled.

  Once the uninstall is complete, the next step is to check and fix permissions of Mac disc. I've included the document '12.x disk utility: repair disk permissions'. Verify and repair disk permissions has finished. Please completely off the Mac for a minute and the Mac is restarted.

  The next step is to install the software. I've included the link to "HP Photosmart full feature software and drivers - Mac OS X 10.6, OS X 10.7, OS X 10.8. As soon as the software has finished downloading, open the software and follow the instructions on the screen for the installation.

  Please make sure that if you are able to install the software correctly, you click on the Apple icon and search for the software updates.

  The installation software sees your printer? You are able to install the software correctly? When you try to print now, is it always felt strange text?

  Thank you.

• OfficeJet 4630: Problem printing with Officejet 4630

  I just replaced an OJ4620, who was not black printing, with a new OJ4630.  I am now having a problem with the OJ4630.

  It prints text most very well, but does not always print the Abobe reader messages.  I tried to install a printer driver for the 9800 without great success.  It seems that sometimes it will print the pages of Adobe, but most of the time will not.  I feel guest, and when I click on print, it does not appear that the message arrives at the printer.  The machine will then lock up and I'll have to reboot the system.  The thing that puzzles me is that sometimes the feeling will pass, but it doesn't seem to be a reason that I can understand why it happens.

  I never had this problem with the 4620, but he feels now.

  I have Adobe X and when I check the updates on the site, I thought there is not everything.

  Fran

  Hi @Fran47,

  Welcome to the HP Forums!

  I see that you have a problem with your HP Officejet 4630 of printing when using Adobe Reader on Windows 7. I'm happy to help you!

  A few questions for you:

  • What happens when you make multiple copies? Copy the text or mixed Documents.
  • What happens when you print from other programs, such as Notepad. (The same issue happen?)
  • How is the printer connected? USB or wireless?

  In the meantime, I suggest to try our HP print and Scan Doctorand see if that can solve the problem for you automatically.

  Hope to hear from you soon and thank you for posting!

  "Please click the Thumbs up icon below to thank me for having responded."

• Problem printing with HP Deskjet 5150

  Hello, I have a problem with my HP Deskjet 5150 color inkjet printer. A few months ago, I noticed that all the documents I want to print are printed with the left margin of the page wider than the right margin; Instead, both margins have the same width. This question concerns the documents in general, and not of documents printed with a specific software only.
  All computers that use the printer have Windows 7 as operating system. I tried to install the drivers of online support for the transition from Windows Vista to Windows 7, but the problem remains.

  What can I do?

  Thank you.

  Hi andrewshort94,

  Thank you very much!

  With this, it is certainly a problem with the hardware of the printer, and because all computers are Windows 7, there is no HP software to try other things.

  You need a Windows XP computer to install this printer to be able to access the HP Toolbox to perform alignment and things of this nature, as it was the last operating system supported the full features software. If you do not have access to a Windows XP computer, I might suggest that you start looking in getting another printer. You can call the HP Technical Support and inquire about trade and commerce program to see what kind of offers they have for you

  Hope this helps, have a nice day!

• Problems Printing with LR 5.6 HP

  I just upgraded to LR5.6 on your laptop Windows 8.1.

  I have printing problems printing to a HP Photosmart C309G printer. I've already printed successfully to this printer from LR4 running on a Vista laptop.

  The questions that I have are as follows: -.

  1. When I try to change the page orientation in Page layout, it makes no difference to the orientation of the image.
  2. Once I have setup the printer settings in the printer dialogue and send it to the printer to print on paper of format A4; LR said that it renders the image; He finished then the printer pulls the paper through but does not print anything. I tried different settings without success. However, if I change the size of 10 x 15 cm prints OK.

  I'm completely confused as to how to proceed, because I have no printing problem printing from MS Office and Adobe Photoshop Elements products.

  Any help would be accepted with gratitude.

  Thank you

  Peter

  Managed to solve the problem. Somehow the driver for the printer had been installed twice, was originally a kind of conflict. I deleted the duplicate driver and everything now works as expected.

• All-in-one DeskJet 4625 and printing with Mac OS 10.9 Maverick

  I just installed Maverick - Mac OS 10.9 - and print is no longer a device all-in-one DeskJet 4625.  The computer and the device are communicate since I can see the ink levels, scanner and other functions, but it will not be printed.  I know that there is no problem with the printer, since I can print to it from another computer that has installed Mac OS 10.8.  Apparently, there is a need for an update of the printer driver.  Apple support is not an updated driver.  So, my question is hp will provide an updated driver?  And when?

  Hello

  Apple provide a updated driver.

  First restart your Mac, then click on the Apple icon and select software update, do not forget to install any available HP or Apple updates.

  If you can't print, try installing the package from the link below and check if this is useful, although it does not list the Mavericks, it should work on the operating system as well:

  http://support.Apple.com/kb/dl907

  Shlomi

• Problem printing with Firefox browser

  When I print my bank statement from my Firefox browser, he's dating a waste over-print allow is like a garbled VACUUM. If I switch to my Safari browser (which I use rarely) it will clearly show without waste over-print to allow or delete. See attached image. This can be corrected?

  If the statement is a PDF file, it could be a problem with the PDF Viewer built-in to Firefox. You may need to use the download button (arrow on the toolbar of the PDF Viewer) to open the document in preview or another PDF reader to print the statement correctly.

• HP C309g: Problems printing with photo paper and not A4 paper

  My HP 309 g perfectly print a picture on A4 paper without flaws. However, whenever it prints the exact image even on HP Premium Plus photo paper, the colors are weird - not black, but the yellow blues and roses. I removed the print head and carefully cleaned and aligned the printer nothing helps. Verification of diagnosis HP shows no failure at all. The obvious flaw must be with the photo paper, but I am not convinced that this is the real problem. Can someone help with this really weird problem please?

  Hi @Quackers,

  Welcome to the HP Forums!

  I'm happy to help with your PS C309g

  I would normally be with you that photo paper would be at fault, but as HP paper, it should be good. I realize, this may be irrelevant, but make sure that you load the face of photo paper (print side) down so that it prints on the right side of the paper.

  If you load it properly however, which I am sure you are, I suggest that you try the steps in this document to solve the problems of quality Print to the HP Photosmart Premium all-in-One Printer Series (C309) .

  Let me know how things are going for you!

  Happy holidays!

• HP Deskjet 2540: Problem printing with HP deskjet 2540

  Hello world.

  I need assistance with my printer. Sorry but I am not English native language so I hope you will understand everything.

  I have a HP deskjet printer and Windows 8 2540.

  The problem is that when you're printing suddenly stops printing. But if I try to print single pages, it prints again.

  When it stops print anything in the print queue as if she have all the.

  It usually occurs with the PDF file.

  I tried to search on the hp support page and I followed the instructions about to disable the printer spooler because maybe can give problem while printing, I did it but when I tried to print again the computer give me a message like this "If you want to print you need to install a printer" but it is not uninstalled the printer, its status is "ready to print".

  Can you help me please? Because I do not understand, and he is not the first time that the printer give me problem while printing.

  Thank you and sorry for my bad English

  Viviana

  @ViviHika

  You are welcome.

  Unless you disable the print spooler service, it will restarts when you then start / restart the computer.  In almost all cases, it is a good thing.

  You can find the startup type control:

  Control Panel > display icon > Administrative Tools > Services >

  Services opens > defiler scroll down, find the print spooler > right-click on print spooler click >

  Opens properties > startup type: > select from the menu:

  • Automatic
  • Automatic (delayed start)
  • Manual
  • People with disabilities

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  You can, if you wish, change the options in the print spooler > Properties > recovery tab

  One of the most interesting Print Recovery options: restart the computer

  • Restart the computer may be initiated at the first, second, or one point of future failure.

  "Restart the computer" (without the clearing of the PRINTERS folder) can be used to stop and restart the spooler then (at startup).  The restart procedure could allow 'stuck' print jobs to resume printing.

  The option "Restart the computer" could be useful in a situation printing is a main function of the computer and the printer is supposed to work without supervision / outside normal office hours.

  When you configure the "Restart the computer" option, you can enable "actions for stops with errors."  For example, you can send a message to the computers on the network, which indicates the computer will be restarted within a certain time.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Designjet T120 - problem printing with drawings and renderings

  Hello

  My name is Rania and I run an Interior Design firm. Recently I replaced my 130NR with a T120 and after a few months of printing, I get what can be seen in the attached photos. Color brakes, good color bands, black color, where it is not supposed to be, etc. Someone had the same problem? Thanks a lot for your time looking at my post. Rania.

  

  

  

  This forum focuses on the level of consumer products.  For the Designjet you can have better results, post in the forum HP Designjet here.

• Problem printer with XP updates

  I updated to XP and lost the ability to print on my HP OfficeJet Pro 8500.  Other users has solved the problem by doing a system restore.  My restore feature has been turned off, so I did not have this option.  Another way to reverse the cause something updated or otherwise resolve the issue?

  Hi Hadley,

  We would require the following details to help you best.

  (1) do you get an error when your computer fails to print?

  (2) update do you have installed?

  (3) is the issue limited to any particular document?

  You might face this problem if the printer drivers are corrupt. Follow the steps below to solve the problem.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can download the latest drivers form the link given below.

  Driver downloads &

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3752456

  You can follow the steps below to check the installed Windows Update and provide us with the number that caused the problem.

  (a) click on the button "Start" and select "Control Panel" from the menu that appears.

  (b) double click on "Add / Remove Programs' to open the list of programs currently installed on your computer.

  (c) click on the box next to the option 'see Update' at the top of the window.

  (d) locate the "Windows XP - software updates" header. Below, you will find a list of updates all the date where they have been installed and the installation of the window.

  You can turn on Restor system on your computer by following these steps.

  (a) click on 'Start' and then 'right click' on ""my computer ' point and select "Properties". ".

  b) in the "System Restore" tab, uncheck "turn off System Restore', press 'OK'.

  Write us with the details asked. We will help you to come up with the question.