Apple and Dell laptops with OfficeJet Pro 8600 bonus?

Similar Questions

• Maverick incompatible with Officejet Pro 8600 Plus

  Maverick update os x 10.9 is incompatible with Officejet Pro 8600 Plus.

  1 PDF files from the Web pages are black and show no information when I try to print from any browser.  Must take snapshots of Web page and print from that

  2 info printer shows that it is still printing when it is finished and will not move forward to the next task

  Help, please!  I see that there is no HP software update to resolve this issue and am confused why you didn't do your printing software compatible with a huge update of Mac.

  

  Hi podisc,

  Thanks for the quick response.  It is good to hear that you can print, it's at least a start.

  I know that you have not received the error messages in the document, but the behavior you describe leads me to believe that the software did not completely uninstall or install completely with the driver for the Mavericks.

  Please follow the steps listed in the document below and let me know how it goes.

  An "unsupported Operating System" or "Software is not compatible" message on a Mac running OS X v10.9 Mavericks "

  http://support.HP.com/us-en/document/c03976994

• 6 "x 9" envelopes with officejet pro 8600 premium

  I try to print 6 "x 9" envelopes of greeting cards on my new officejet pro 8600 premium and get error message paper size mismatch. " With my old photosmart printer I was able to create a custom size envelop for this problem. But this option is not available on my new and better printer. Any ideas?

  Hi garyaw2,

  Try adding your old printer driver for JO 8600 and try to print, please follow the steps below to add a printer.

  Start > devices and printer > add a printer (available on top) > select Add a local printer (NO other options) > select Create New Port > port TCP\IP Standard select > next > enter IP address of JO 8600 (can be found by selecting the option Wireless on the front panel of the printer) > following > Select manufacturer such as HP or Hewlett-Packard and under printer select your old c309 printer and complete the wizard.

  Try to print again with prinetr selected c309.

• HP OfficeJet Pro 8600: How to print on paper of custom format with Officejet Pro 8600 for Windows 10

  Problem: Cannot create a custom for HP Officejet Pro 8600 paper size

  Found a solution for Windows 7, but I need this same problem solved for Windows 10...

  The solution: 'Using pilot Deskjet 9800 to set a custom paper size to print for Officejet 8600' worked very well for me on a Windows 7 machine...

  However, the HP Deskjet 9800 driver is not available for Windows 10... you have another driver I can use that would work with Windows 10 and which is compatible with the HP Officejet Pro 8600... ???

  Hello

  Use the HP Deskjet 6940 as another driver, if it is not listed under HP it appears after clicking the Windows Update button in the Add Printer dialog box:

  1. Right-click your printer 8600 and select printer Ptoperties. A note which port is selected under Ports.
  2. Click Add a printer.
  3. Click on 'the printer that I want isn't listed.
  4. Select A Local port or a netowrk with manual settings.
  5. Select the port used by your printer.
  6. Select HP
  7. Select HP Deskjet 6940
     Note: Click on Windwos update if it is not listed under HP.
  8. Fill the wizrd and 6940 driver allows you to print a document custom formats.

  Kind regards

  Shlomi

• How to set the date and time in eAiO Officejet Pro 8600?

  The printer is connected with the USB cable and the date & time display zeros. I wasn't able to find a menu option for date & time setting in the printer Panel. The user guide mentions nothing about it. How can I configure date and time?

  Hi Exxpert,

  Here is a tutorial from HP on how to set up this printer, scroll all the way down to step 9 for the date and time.

  Configuration printer Officejet Pro 8600

  I hope this helps!

• Page numbers and date stamp for Officejet Pro 8600 more

  Just installed Officejet Pro 8600 Plus.  When I print documents, I need to print WITHOUT the page numbers in the header (ie: page 1 of 4) and the date at the bottom.  I lived all the parameters that I find and cannot find this option.  Help, please!

  Hello

  You can remove the default header, footer... using AMPe configuration. This example so for Firefox on the tab "margins & header/footer":

  

  You simply give all areas "in white".

  Update: Very similar to Internet Explorer.

  Kind regards.

• Not completely scan legal size with Officejet Pro 8600 more Documents

  I'm trying to scan legal documents of sizes on my Officejet Pro 8600 Plus new. I have gone through the forums, and this has been a recurring problem in the past (see link- http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Scanning-Legal-Size-Documents/m-p/35416#M14...   ), but doesn't seem to be resolved. If I use the document feeder or glass, the paper is cut down and seems to be stopping at the "A4", legal vs. size. I can't find any setting on the scanner itself, or in the HP Utility software to change this, or even to be able to identify the current configuration, if it is a.

  I use a Mac Pro, system 10.6.8 just installed and started using the printer a couple of days, and everything is up-to-date software-wise. Everything else on the machine works beautifully.

  Can anyone identify what is happening here and how to fix?

  Thanks for your help - I chose precisely this particular unit on the next model down because of the glass/size bed legal, and if I can't use it to scan legal documents, well, it's a problem. Thanks for your help!

  Hello

  Please, try the following steps:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan the image.

  Please let me know of any changes,
  Shlomi

• Cannot select tray 2 copy with Officejet Pro 8600 Premium

  Win 7, 64 bit

  OfficeJet Pro 8600 Premium

  I installed the drivers on the disk supplied in the box. (Not sure if there is a new driver or an update yet for this product.)

  I bought this printer so that I could load my UPS package labels into a bar of tasks and plain paper in the other.

  I loaded the labels into Tray 1 (according to instructions) and paper in tray 2.

  I have everything works fine except that I can't understand how to specify tray 2 as the tray to make copies of. In respect of the COPY > SETTINGS > SET SELECT only Tray 1 is displayed.

  Issues related to the:

  (1) why not tray 2 option to copy? How can I fix it? A firmware update maybe?

  (2) printing these UPS labels from tray 2 seems to work very well. Is there a reason why this would be bad?

  Thank you!

  Connected by ethernet cable, he downloaded the new version of the firmware (... 1136BR).

  That fixed it! Tray 2 is now an option under settings to copy.

  The only disappointing is that I asked about a new version of the firmware in my first question... but it took a whole week to get this resolved... and I had little to get to the answer myself!

  In any case, now it is fixed and seems to work very well.

• problem with Officejet pro 8600 N911g ePrint

  I'm trying to install eprint on my officejet however I have questions. I went into my settings to printers via the IP address and when I click on activate ePrint, it says this:

  Unable to connect to the server.
  
  Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer.
  If your network requires a proxy server address to connect to the Internet, click Proxy enter or check your browser settings.

  As far as I know of I do not use a proxy server address. I have Cox Cable internet and have set the IP to my computer/printer to static. All other work well i.e. wifi printing, iphone/ipad and ext.

  Thank you

  Danny

  The steps below a usually resolve the problem you are experiencing:
  
  1. unplug the power cord at the back of the printer.
  
  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).
  
  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.
  
  4. wait for 30 seconds, then plug the printer back and power.
  
  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.
  
  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):
  
  1. tap the wireless at the top of the screen of the printer and note the IP address.
  
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
  
  3. the printer status page must be open.  Click network in the upper part.
  
  4. click on networking on the left.
  
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
  
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
  
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
  
  8. leave automatic IP IP address Configuration.
  
  9 change the DNS address to the manual DNS Server Configuration.
  
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
  
  11. click Apply and you should get a success message.
  
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  Let me know if you need additional assistance. Thank you

• Lines on copies b & w with OfficeJet Pro 8600 e - AiO

  When I make a copy in black and white with our 8600 Pro OfficeJet e - AiO output contains several vertical lines. If I press the color instead the output is fine. Cleaning is obviously not in this case.

  No problem with printing or fax either

  Try to take a look at the solutions suggested here http://support.hp.com/us-en/document/c02881567

  Good luck.

• New computer w / windows 8.1 and using my hp officejet pro 8600

  How do I set up my pro hp8600 so I can use it with my new computer. So far I've been mean printing out of it. My new computer is a touchscreen hp Pavilion all-in-one w / windows8.1 installed. You want to know how to scan, copy and fax.

  Hello

  You need to install the software and drivers for the pronter on your computer. Please use 2 CD that comes with your printer or download and install the package on your computer Windows 8.1:

  Full software features and drivers:

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Kind regards.

• How to print on paper format customized with Officejet Pro 8600 N911a

  I am trying to print my own designs on custom-size paper (size not included on the list) and does not know how to set up the printer to print on a 10 "x 6,625" piece of paper.  Can anyone help with this?

  I downloaded the last regular printer driver so am at a loss. Any help would be appreciated I try to avoid paying for a printer do the work.

  Virginia

  Hello-

  OK, the machine lets start with Win 7 side.

  Click on start, devices and printers, then add a printer.

  Select Add a local printer. Then choose "create a new port" and deposit up to port box 'TCP/IP Standard' shot after.

  Uncheck "Ask printer" for me and put your IP 192.168.0.10 in the box that says ' Hostname or IP address.

  Click Next.

  When the printer MFG box opens, choose HP on the left (not Hewlett Packard) and HP Deskjet 9800 printer (HP) take right.

  Click Next, as value by default (if you want) and finish.

  Let me know when you reach this point.

• ePrint with officejet pro 8600 more

  When I try to connect to set up my e-print it says my email is already associated with snap fish and it wont let me sign

  Perhaps it is that you have a SnapFish.com account. A large number of long-term HP customers have SnapFish.com accounts and don't realize it. One of the printer software frees customers signed up automatically, and most people did not know, or forgot, because they never used it. Try to go to SnapFish.com and using the forgotten password screen link it connection. Once you have reset the password, go to ePrintCenter.com and use the SnapFish.com log in information for you connect. If this does not help, you may need to contact SnapFish.com directly to delete the account, or use a different email to record with. Another difficulty that I have met is actually recreate a SnapFish.com account, if SnapFish says no accounts exist, or no email comes, when you try to reset your password.

• Problem with Officejet Pro 8600 Premium, Windows 7 professional scanning

  When you are scanning an 8.5 x 11 page and save as a PDF on my computer, the entire page is not displayed.  Is there a setting that I jumped when setting up?  This is my first time on this printer...

  Thanks for the reply.  I've actually turned on Windows Firewall, turn off the first, then and now it seems good scan to PDF.  I really need to be able to scan in PDF, not only in JPEG format.  Scanner seems to work fine now, maybe it was just a quirk yesterday...

• 8.1 Windows Pro problem with HP OfficeJet Pro 8600

  I am running Windows Pro 8.1.
  I tried to install the software and drivers for HP OfficeJet Pro 8600 without success.

  I tried to remove the software, reinstall, reboot the computer, do a 'clean' start, and nothing has worked so far.

  I received the following error message:

  Impossible to install a file that is necessary because the CAB file c:\users\User\appdata\local\temp\7zS2EAD\OJ860x64.cab has a signature digital invalid. This may indicate that the file is corrupted.

  The error message is the same every time I try something new.

  I am able to print, if I add the printer through the option "add a printer" in Windows Explorer, but I want to install the complete software so that I can scan also.

  I downloaded more than 10 times the files several associates of troubleshooting: troubleshooting HP Installation failure MSI, HP Print and Scan doctor, but they have not helped at all.

  Any suggestions would be greatly appreciated.

  Hello Alfitoand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have found errors during the installation.  I want to help you with this.

  I would start by trying to install on another account on the computer.

  It also seems that there may be a corruption in the temp directory.  I suggest you remove all your temp HP folder.  I am including the steps to get the specific folder:

  -On your keyboard, hold down your windows key and R key

  -A 'RUN' box will become available

  -Type in %Temp%, and then hit

  -Open your folder that begins with 7z

  -Delete everything inside

  -Restart your computer

  Once you have done this, I recommend reinstalling the software using the HP printer install wizard for Windows.

  If this does not resolve the issue, I would recommend going to your home screen in mosaic, and typing in CMD and press to enter.  That will take you to your command prompt.  In you command prompt, type sfc/scannow, and then press ENTER.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!