Lines unwanted during the use of effects.

Similar Questions

• Error occurs during the use of Toshiba SD on Portege start utility

  When im trying to use the utility as a tutorial has shown on this Web site to get the SD card to start the toshiba restore DVD, I get the error:

  "Error reading. This disc may be unformatted or not introduced. "

  When I go to my computer and open the sd card, I get the error the disc needs formatting I'll do next.
  The sd card works fine after for other files that I put on.

  When I return to the utility boot sd I get the same error, and in my computer, I get the same error to format the drive.

  If the utility is to mess up something.

  I have UN and then re installed but still the same.

  Initialization of the sd is my last chance to restore my computer which is on the brink of death.

  Hello

  What files did you put on the SD card?
  As much as I know about the usefulness of boor SD card installs a file on the SD card as on the bootable floppy drive.

  Did you place the files from the recovery on the SD CSA CD?
  If Yes, then I n t think you will be able to recover the laptop that way.
  You must use the recovery CD to recover the laptop.

  If you have no external CD/DVD drive bootable and you won't buy such device, so I recommend you to visit a Department or an ASP and there to recover the operating system.

• It is mandatory to use the manufacturers during the use of the collections?

  Code

  --------------------

  DECLARE

  Int_varray TYPE is VARRAY (3) integer;

  VARRAY_INT INT_VARRAY: = int_VARRAY();

  BEGIN

  DBMS_OUTPUT. Put_line ('VARRAY initialized with null');

  VARRAY_INT: = int_VARRAY (NULL, NULL, NULL);

  I'm in 1.3

  loop

  DBMS_OUTPUT. PUT_LINE ('INT_VARRAY('|| i||'): ' |) VARRAY_INT (i));

  end loop;

  DBMS_OUTPUT. Put_line ('VARRAY initialized as VALUES');

  VARRAY_INT: = int_VARRAY (11,12,13);

  I'm in 1.3

  loop

  DBMS_OUTPUT. PUT_LINE ('INT_VARRAY('|| i||'): ' |) VARRAY_INT (i));

  end loop;

  end;

  OUTPUT

  --------------------

  VARRAY initialized with null

  INT_VARRAY (1):

  INT_VARRAY (2):

  INT_VARRAY (3):

  VARRAY initialized as VALUES

  INT_VARRAY (1): 11

  INT_VARRAY (2): 12

  INT_VARRAY (3): 13

  The sample code above for collections works perfectly well with the help of a constructor method. However, my question is that is it possible to re - write the same code without using Builder methods?

  or is it mandatory to use constructors when the use of the collections?

  But he has not yet answered my question. Is it mandatory to use a constructor method? If 'NO', then how we can treat a VARRAY (not the tables / associative PLSQL) without a constructor method?

  When you have a basic question about the functionality of the Oracle, you should ALWAYS read the documentation.

  The doc of the PL/SQL language answers your question

  With the help of documents and Collections of PL/SQL

  Initializing and referencing Collections

  Until you initialize it, a nested table or varray is atomically null; the collection itself is zero, not its elements. To initialize a nested table or varray, you use a builder, a function defined by the system with the same name as the collection type. This function constructs collections from the elements that is passed.

  You must explicitly call a constructor for each varray and nested table variable. Associative arrays, the third type of collection, use no constructors. The constructor calls are allowed everywhere where function calls are allowed.

  Example 5-10 Initializes a nested table using a constructor, which resembles a function with the same name as the collection type.

• Unwanted shift line brush at random during the use of the brush and the eraser on the tablet + mac

  I use a Cintiq 22HD on a Macbook Air, and whenever I use the brush or eraser it will create a line as if I held down the SHIFT key, about 60% of the time. I have no button on the tablet that is assigned to the shift key and the SHIFT key on my keyboard is not stuck like I can type perfectly well without seeing random capitalization. It is impossible to use, does anyone have an idea on a fix?

  I posted this before and reset preferences doesn't solve the problem.

  I thought about it. I pushed too much information at once via the single usb port on my mac.

• Custom script in RPO making empty columns in the line items during the training.

  Hello friends,

  its URGENT! need help.

  We have a requirement of the company in the case of the currency 'EUR', it should delete the dot (.) and replace the comma (,) with dot (.) and other currencies it must remove the comma from columns, quantity, price per unit and Total.

  For example:

  For "EUR" 2.123,00 and it must convert it to 2123.00 and 2.123 must convert 2123.

  "USD" 2.123,00 to convert to 2.12300 and 2 123 to convert to 2123.

  This requirement, we wrote a custom script User Exit (UserExitLineItemValidate) function and call that function in line item validation.

  but after having formed the invoices for currency 'EUR' by supervised and learning check (SLV), it removes the values in the column quantity, unit price and Total.

  and if we remove the script, train and then reapply custom script it works but not always.

  My Script:

  Public Sub UserExitLineItemsValidate (pWorkdoc As SCBCdrPROJLib.SCBCdrWorkdoc, pValid As Boolean)

  ' User exit is called at the end of the Document_Validate on the class "bills".

  Dim strQuantity As String

  Dim strUnitPrice As String

  Dim strTotal As String

  Dim lngRow As Long

  Dim pTable As SCBCdrTable

  Set pTable = pWorkdoc.Fields ("LineItems"). Table (pWorkdoc.Fields("LineItems"). ActiveTableIndex)

  If fnIsVerifier and pWorkdoc.Fields ("Currency"). Text = "EUR" Then

  For lngRow = 0 To pTable.RowCount - 1

  
  

  strUnitPrice = pTable.CellText ("unit price", lngRow)

  If InStr (strUnitPrice, ".") > 0 and InStr (strUnitPrice, ",") > 0 Then

  strUnitPrice = Replace(strUnitPrice,".","")

  strUnitPrice = Replace(strUnitPrice,",",".")

  pTable.CellText ("unit price", lngRow) = strUnitPrice

  ElseIf InStr (strUnitPrice, ",") > 0 Then

  strUnitPrice = Replace(strUnitPrice,",",".")

  pTable.CellText ("unit price", lngRow) = strUnitPrice

  End If

  strTotal = pTable.CellText ('Total', lngRow)

  If InStr (strTotal, ".") > 0 and InStr (strTotal, ",") > 0 Then

  strTotal = Replace(strTotal,".","")

  strTotal = Replace(strTotal,",",".")

  pTable.CellText ('Total', lngRow) = strTotal

  ElseIf InStr (strTotal, ",") > 0 Then

  strTotal = Replace(strTotal,",",".")

  pTable.CellText ('Total', lngRow) = strTotal

  End If

  strQuantity = pTable.CellText ("quantity", lngRow)

  If InStr (strQuantity, ".") > 0 Then

  strQuantity = Replace(strQuantity,".","")

  End If

  If InStr (strQuantity, ",") > 0 Then

  strQuantity = Replace(strQuantity,",",".")

  End If

  pTable.CellText ("quantity", lngRow) = strQuantity

  Next LngRow

  On the other

  For lngRow = 0 To pTable.RowCount - 1

  strTotal = pTable.CellText ('Total', lngRow)

  If InStr (strTotal, ",") > 0 Then

  strTotal = Replace(strTotal,",","")

  pTable.CellText ('Total', lngRow) = strTotal

  End If

  strUnitPrice = pTable.CellText ("unit price", lngRow)

  If InStr (strUnitPrice, ",") > 0 Then

  strUnitPrice = Replace(strUnitPrice,",","")

  pTable.CellText ("unit price", lngRow) = strUnitPrice

  End If

  Next LngRow

  End If

  End Sub

  At a very high level of control, (and I can't currently that take a long time to respond)

  • You do this on EVERY invoice, and not only those that you are sub classification (which means "documents that you are training").  Is your intention to assign all invoices or only those formed?
  • In your code, you have the test as shown condition "If fnIsVerifier and pWorkdoc.Fields("Currency").» Text = "EUR" Then".»  You are in essence saying the system ONLY evaluate this condition if the system determines if the application Verifier is running.  What is the desired effect?  Otherwise if the auditor is never used on this document, and the table of line items is never changed, this code would never trigger.

• Wireless router is disconnected from the PC (s) during the use of Firefox 37.0.1

  This problem occurred for the last 2 weeks whenever I use Firefox on each of the 2 PC's I use it every day. The problem may occur a few minutes after the start of Firefox, or it may be hours of continuous use before the connection is lost. It's okay if I'm in Firefox by itself or have the background applications running, but without a doubt requires Firefox runs before I see a problem.

  Configuration: WIN 8.1 and VISTA 64. the two latest updates.
  LAN: cable modem and Belkin wireless router; together with the latest firmware.
  Firefox v37.0.1 without add-ins or modules. Start page is 'empty '.

  Symptoms:
  Status bar Windows shows that I'm disconnected from the router.
  Router and the modem status LED shows that I am connected to the internet. Same thing for the VICTORY of the network status app. It shows no connection to router.

  The problem can be temporarily fixed by power cycling the router. Or, in the meantime just a random delay the connection may (or may not) be restored on its own.

  I also use a standalone PC application that streams the text given in short bursts and runs all day (no video or music... just short lines of text) with no problems until I launch Firefox in the background. Then he can go a few hours before the connection to the router is lost. I also often watch videos on my Tablet without the router problems. While typing in this issue on a PC I was disconnected from my router. I'm hoping to get some suggestions as to what to inspect or modify. Thank you!

  Fred, I had to leave the House early this morning and had no time to dig a cable long enough to reach my modem to try your suggestion. But, what I did was half of your suggestion. I pushed the reset bit recessed on the modem and left the House around 08:30 with Firefox running on both computers. Seven hours later everything is normal. No router disconnects and I gave a very good workout system.

  I have also now initial notice that connects to the web sites are faster.

  It is obviously a logical explanation for what was going on, but to an outside observer (), I see absolutely no logical link to the 'solution' for the rest of the universe. I won't lose sleep on. And I'm going to ask you more specifically when the next puzzle problem occurs! Thank you, Fred!

• Satellite L630-15U - block during the use of the

  I have a L630-15U Windows 7 Professional 64 bit, when I use in battery mode after a few minutes it crashes often. Everything has been frozen, I need to turn it off.

  Hey Buddy,

  What do you think average either it blocks during use?
  This means after a few minutes when you use your laptop with battery only if freezes and has to be restarted, no?

  Well, it's not easy to say which is the reason. You use the original Toshiba battery? Otherwise I recommend the spare parts and test with an original Toshiba battery.

  Also, you could try a BIOS update. Charge the battery up to full East, leave AC connected adapter and start updating the BIOS as an administrator. Close all programs that are running before do you (also antivirus).

  Check this box!

• Why my iTunes library sound randomly cut during the use of my new macbook pro and the old Bose speakers?

  Why my iTunes library sound randomly cut during playback on my new Macbook Pro and the old Bose speakers?

  The speakers connect through a USB port, instead of by means of the mini plug stereo audio output (headphone)?

  If it uses the standard audio out Jack, try to plug ordinary headphones instead.  The problem goes away or still occur?

• Bug found during the use of references to the control in subVis on Compact RIO?

  Hallo,

  I have a simple task. I want to read higher VI into a Subvi the real value of a control to a level. I want to solve this problem by using a reference to the control.

  I have attached a simplified program that shows this.

  But the problem is now. When I run the main VI on a cRIO-device, the indicator "DataByReference" is not updated with the actual value. Only when I opened during execution of the "RefMain.vi" too, then everything works fine.

  More strange thing is, when I run the VI of hand on the host PC, everything works well, also without having to open the "RefMain.vi" when executing.

  Someone at - it an explanation for this behavior?

  Thanks in advance!

  Bernd

  This isn't a bug.  See this explanation.

• XML parsing error. no evidence that that is line 1 during the installation of the audio bible Download Manager

  I try to install the Download Manager audio bible, when this error screen appears.

  XML parsing error. any element that is on line 1

  Hello

  1 did you change on your computer before this problem?

  2. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  3. are you using Internet Explorer? If Yes, what version of IE are you using?

  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows7/find-out-which-version-of-Internet-Explorer-youre-using

  I would say download you the application and install it again and then check.

• Surround sound cut during the game Mass Effect 2 on Windows 7 x 64 bit

  Original title: Surround sound cut while in games

  I gathered all my own office.

  Here are a few basic requirements.

  Procoessor: AMD Phenom II 955 3.2x4

  Motherboard: Asus M4A77T/USB 3.0

  Graphics card: Nvidia GTX 460

  8 GB ram

  Here's my problem:

  My surround sound cut while I play Mass Effect 2. Sometimes not entirely; I'll be able to hear the music, but not dialogue. Other times I can hear the dialogue but not the music.

  I use a headset usb (Logitech G35 7.1 w surround)

  What happens if tried:

  Update the bios.

  Update card drivers his (motherboard onboard)

  Update drivers Logitech G35.

  Patchwork of Mass Effect 2.

  __

  In addition, on people of forums to effect mass who use Windows XP disable their hardware acceleration and solve the problem. I can't find this option in Windows 7 x 64.

  :) Help is appreciated...

  Hi korlath,
  First, make absolutely certain that your soundcard Control Panel, but also the sound properties in the control panel are properly configured to use the number of channels you want.
  If you are still having problems and you want audio equipment, follow these steps:
  a. go to your C:\Users\\Documents\BioWare\Mass Effect\Config directory and rename the file to something else BIOEngine.ini.
  (b) launch Mass Effect without running the Config utility. The game will recreate BIOEngine.ini using the default values, and must correctly identify your audio hardware.
  c. in the in-game Audio hardware settings should already be selected - do not change back to audio software or make other changes to the sound settings.
  Note: Audio: If checked, the game uses hardware acceleration that improves the audio quality and performance. I recommend you check this option in most cases, unless you are having audio problems or other problems. In particular, note that you will need to check this option if you have a multichannel audio system and use more than 2 channels.
  Hope this information is helpful
  Kind regards
  Ajay K - Microsoft support
  -------------------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• line blocking during the update statement

  
  Hello

  Using Oracle 11 g 2. If I call the following update statement of meeting A, meeting A locks the line until a statement commit / rollback is emanating from the session has. If the session B calls the same statement was updated and the same line, session B will have to wait until the lock is released in the session. However, application developers are expressed in terms of discussions. Would it be possible that the update statement is called in the same session by several requests? If so, the case statement can be evaluated without the line being locked which could lead to erroneous results? Trying to keep this short message.

  tableA has column (number of key, primary) and columnB (number)

  {

  Update tableA

  Define columnB = case when columnB = 3 then

  4

  When columnB = 4 then

  5

  on the other

  columnB

  end

  When columnA = 6;

  }

  2 applications (almost at the same time) in the same session could assess columnB 3. The goal would be the first query sets in column 4 and the second request sets in column 5.

  > However, application developers are expressed in terms of discussions.

  Of course, they are...

  But each application thread will have its own dedicated database session.

• Animation choppy during the mp4 post effects

  Hi all

  I get the jerky/choppy animation effects when I publish my Captivate files to mp4 format.

  Export to SWF format is fine and fluid animations same since I see when previewing video in Captivate.

  I tried viewing on different devices and used disseminators of media, but I still see the issue. Interestingly, my colleagues abroad don't notice it so much. Not sure if I'm hypersensitive or if they have a different setting for mp4 playback.

  Feel free to take a look for yourself:

  Original CPTX file

  Published SWF file

  Published MP4 file

  Any light that can be shed on this would be much appreciated!

  Thank you

  MJ

  Captivate publishes MP4s at 15 frames per second by default and has no option in the settings to change that. There is a frame rate option (default 30), but that applies only to the SWF output. While this made to smaller video files, it also tends to make your eyes bleed.

  Fortunately, there is a solution: http://iconlogic.blogs.com/weblog/2012/11/adobe-captivate-6-fps-your-mp4s.html

  While the blog is then Cp6, I can confirm that it works for Cp7 Cp8. You just put this file in your Captivate directory (C:\Program Files\Adobe\Adobe Captivate 8 x64\) and you're ready!

• My iPod Touch 5 G gets hot during the use of any application.

  Hello. Get - my iPod very sweet-hot everytime I use ANYTHING. Even if it is the only application running. He sometimes unpleasantly warm to keep it. I left for a while to cool off, but heat just backup again. (Note: the top of the iPod heats up for the most. This is where the battery.) I've owned my iPod for less than a year, but I buy used off of eBay. (he was "released to nine seller") y at - it means to solve my problem, or is my battery just worn out? I don't have a warranty and do not have the money to fix it. Thanks in advance!

  Make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem. Appointment/diagnostics are free

  https://www.Apple.com/retail/Geniusbar/

• Satellite A660 - beep sound stuttering during the use of Player multimedia CD player

  I have a boring beep and stuttering (music is delayed momentarily every few seconds, type electronic interference noise) when using the media player or CD player. I took the laptop for a repair under warranty where they replaced the motherboard without success, they then informed me that they believed that it was a software problem, and a reinstall of Windows 7 was necessary if I've done the following with the recovery disks that I created in that order, results in parentheses;

  -restore the factory software (no change still beeps and stutters)
  -formatted the HD (initially, I thought that solved the problem but after beginning dload and install about 80 Windows updates the question came back)
  -formatted the HD once again (once more I thought that the problem has been resolved, but I heard the beep/stuttering only once or twice)

  Given this HD format takes 26 hours, I will not begin to dload/install updates including Windows 7 until I can try something else or have an answer.

  If anyone can shed some light on this issue, the noise is terrible review it was purchased as a unit of entertainment media playback.

  Thanks for any help in advance here.

  Post edited by: vite11i

  Where the beep from exactly? Speakers or elsewhere?