linked file not found if I delete or move a file to another card

Similar Questions

• Deep links: content not found

  We use links to articles from outside of the application in the following format:

  DPS. < publicationID >: //?entityRef=/publication/ < publicationID > < articleName > /article/

  
  

  The development application starts correctly, but then, we get the error message "Content not found".

  The content (by default the collection, collection and the article) is published. Why we can not get the content? Is it not possible to test the deep links in the application of development?

  I got it works in normal development and the Apps controls upstream. However, I got an error message "Content not found" in the first place... It turns out that article I was trying to achieve was based on a map that was not visible in my model of provision. I changed it and published the page layout once again and my link (same as yours) goes directly to the content.

• Not able to receive, delete or move the emails in Outlook Express

  Cannot move emails to another folder.  Cannot delete emails.  Cannot receive emails.  If I try to open e-mail messages that are already in the Inbox, I get a message that it could not send a notice of receipt of the message, which I'm sure that spammers never asked.  I can send emails, but that's all.

  Sync replaces send/receive. You will find WLMail help here.

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• Still not found the keyboard shortcut to move the logic mixer sliders?

  I looked through the keyboard shortcuts and on You Tube, maybe I'm missing something!

  Y at - it a keyboard shortcut to move the sliders?   without using the mouse

  It is not a. You will have need of a control or a MIDI controller surface cc #7 out on a button or fader... Keyboard shortcuts can not send continuos output of the controller.

• Hi, I searched the forums, but the site has not found an answer... How to "disable another computer" for lightroom 6 (not the version of cloud).

  Hi, I keep getting the message that I've exceeded the number of computers permit.

  Now, I disable lightroom on another computer... How do I do that?

  I asked the same question in the forum search... but has not obtained a great success in return...

  Thanks Michel

  Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  If the cat person sends you back to this open forum, you are out of luck... only Adobe can help, nobody here can access the activation server

• Error - the file awduu36e.sys is not found. Press a key to continue, not able to start after having done the repair of the system on the XP machine.

  Original title: the awduu36e.sys file is not found.

  After a repair of windows XP SP3, I receive, at startup, the message "the file awduu36e.sys is not found. Press a key to continue"- I can't press a key because the keyboard is not recognized or active at this point in the trunk, although I can access the BIOS earlier in the cycle. I tried to boot from the CD from Microsoft but get the same problem. -Any ideas please?

  "cadastra" wrote in message News: 80941b1a-7 c 69-4f05-a259-560357b7f291...

  Hi Kim,

  First of all thanks for respone and sorry for the delay to return but am in Australia so bit of a lag in time!

  OK the sequence goes as follows:

  1 gigabyte MB BIOS screen - at this stage sensitive keyboard and I can access BIOS OK.

  2. new screen - PCI resources; Checking DMI Pool etc. ;

  3. new screen - "Please choose which startup option:

  -Windows XP Home Edition

  -Installation of Windows XP.

  and countdown etc. - from this point in the sequence of the keyboard does not respond so cannot select the OS and inadmissible F8, then highlighted option default selected that is configured.

  4. new screen - "check you computer hardware configuration...".

  5. new screen - "the file awduu36e.sys is not found. Press a key to continue. "

  As the keyboard is unresponsive after the BIOS screen I have no way of influencing the order above.

  Other relevant points:

  -When you make commissioning/repair day I received the message to halfway through - "awduu36e.sys file is not found" and the option start over or ignore; after another attempt to a couple of times I chose skip so I guess that I got myself into this mess. What is awduu36e.sys anyway?

  -My copy of Windows XP Home Edition SP3 OEM is and has been installed when I got to the machine, so I think that some repair options are not available for me in any case.

  Again thank you very much for the reply and any help you can provide,

  Kind regards

  Fraser

  Looks like you are leaving it too late to use F8 (must be before the OS options appear)- and you have a partial installation of some versions of Windows in progress seeking the file on a CD.
  
   
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• "Cannot save...". "Acces\nom... K:\File because the file is not found.

  I came home from a trip to the beach. Downloaded .jpg photos and started editing them. When I try of "save under" [for example, 100 - 5600.jpg as 100 - 5600.jpg] I get "cannot save...". "Acces\nom... K:\File because the file is not found!" If I try to save it in another format, such as .tif it will track fine. Then, if I try to save as 100-5600 a.tif, it gives me the same thing - "can not save...". "Acces\nom... K:\File because the file is not found!"

  So - any suggestions?

  captreed

  Just saw your screen capture.  Note that the name displayed in the dialog box under account ^ ^ ^ characters in there as your actual path.

  Now, I firmly believe that the special characters are what are causing your problems.

  Rename the different folders in your path to remove these characters and you should be fine.

  -Christmas

• Hard drive not found after upgrade to V2

  I've had several quick links to files on Mac to my file system.  When I click on it after upgrading Fusion V2, WinXP tells me that the link is not found.  This is the name of a path.

  "
  . host\Shared Folders\georgesteve on my Mac\! Data\RealEstate\Databases ".

  No idea how to fix this?

  georges50 wrote:

  I've had several quick links to files on Mac to my file system.  When I click on it after upgrading Fusion V2, WinXP tells me that the link is not found.  This is the name of a path.

  "
  . host\Shared Folders\georgesteve on my Mac\! Data\RealEstate\Databases ".

  1. don't you upgrade VMware Tools?

  2. have you checked the settings of Virtual Machines > sharing sharing enabled and set a brightness?

  3 have you tried to uninstall/reinstall VMware Tools?

• Error - not found process

  Hello
  
  I'm new to APEX.
  I had a doubt in the process of ajax called from javascript.
  The process is called.
  I have debugging messages in the process and that they print.
  
  But in javascript, the value is returned as 'Not found process.'
  
  Am I doing somethig similar to another page in the same application, but its does not work in my case.
  
  How can I debug this or some point on what am I missing here?
  Let me know if you need more details.
  
  Thank you.

  Hello

  Check this Point of the process is really 'On Demand. It seems that it is not because you get this error and

  I can see the value printed on the top of the page, before the header area (before even html tag to be more precise, in view-> Source of early)

  Kind regards
  Jari

  Published by: jarola 30 August 2010 13:40
  corrected typo

• Tried to delete files on the desktop, but it showed "Item not found"!

  I wanted to delete files on my desk. But he showed "Item not found", ask me to locate the file. But I searched the entire computer, the file is no longer exist. But he was still showing on the desktop!

  What can I do to remove them? Because they are really boring!

  Are you sure that it is a folder on your desktop and not just a shortcut (a link to the actual file)?  The actual file can be located elsewhere.

  Check C:\Users\\Desktop, and see if the files are there.  If so, try removing them from there (instead of from the desktop).  It shouldn't make a difference, but it might work.

  Try to use one of the following free products to remove the file/folder (from two places).  Assassin http://www.malwarebytes.org/fileassassin.php of files (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/) or Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml.  These programs often work when normal functions remove Vista not work correctly.

  Search for files in Vista is quite different that it was with XP.  To search for a file with a normal search in Vista, it should be in the index files or types of files - otherwise it will not come to the top.  You CAN get to get to a FULL player search.  To search for the folder C: whole disk in Vista go to start / search and type in ' or '. As you type, you'll see two hyperlinks appear just above where you type and we'll search everywhere.  A click on it.  Who will do a fast indexed search and bring up a dialog box.  Click on advanced search.  Click the drop-down location and find the C: drive and click on it. Check the box "include not indexed, hidden and system files (might be slow).»  Then click on search.  You will now search your entire hard drive to the specified file.  And Yes, this isn't a very effective way to search the entire disk for a file but it is how it is done in Vista.  Once you find the file, try to remove normally and if it does not then try to use both products above to see if you have a better chance.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / A +.

• Cannot delete the file. Says "not not found could not find this item check the location of this object and try again."

  Cannot delete the file.  Says "not not found could not find this item check the location of this object and try again."

  I got this file from my friend got sent - is a word document, I had on their computer.  So I tried to use Disk Cleanup to delete temporary files, temporary internet files and files program downloaded.  Does not work.

  When I check the properties, there is no security tab so I can't transfer ownership in this way.

  I don't want to experiment using the way of the transfer of ownership command prompt as the name of the file is several sentences long.  I can't rename it either, of course.

  Windows 7, a week and I already have a stupid problem which has already lost an hour of my time.

  What I did was to create a Notepad file that was empty and saved in the same location as the file that won't go away.  Once registered.  I click with the right button on the new file and rename the exact name as the file problem.  Don't forget to change the file extension (ex: .doc)

  ex file problem: word.doc

  new file: word.doc

  as long as they match eachother exactly you should see the file problem disappear and once that's gone, you can delete the new file created.

• Wanted to install adobe photoshop and elements 12 first. But I don't have a disc for the cd. I tried to download, but the link says "file not found".

  Wanted to install adobe photoshop and elements 12 first. But I don't have a disc for the cd. I tried to download, but the link says "file not found".

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  PE 10, 11, 12, 13 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 12: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html

• Cannot start application error: getlogicalprocessor procedure entry point information is not found? ... could not be located in the library links file kernel32.dll Dynamics

  Original title: I had the problem that revger.exe and kernal32.dll

  When I run any application on my system, I get an error kernel32 below is an example:

  The procedure entry point processor information get logicasl is not found in KERNEL32.dll dynamic link library.

  Hi Rajeshlenka,

  You did changes to the computer before the show?

  Try to start the computer in safe mode. If the issue is not persists check safe mode if the problem persists in the boot.

  Step 1: Safe Mode

  See the following site:

  A description of the options to start in Windows XP Mode

  http://support.microsoft.com/kb/315222.

  Step 2: Clean boot

  See the following site:

  How to configure Windows XP to start in a "clean boot" State

  http://support.microsoft.com/kb/310353.

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

   

• Error 7 Build Error - file not found

  I am trying to build my software on another computer on the network. I am able to access the directory that I install and the program is not showing generation errors (all VI are not broken). This error only occurs when building. Any suggestion would be great.

  Thank you

  Nate

  The Build failed

  Possible reasons:

  A VI included or one of its dependencies does not exist. Open all the called start/exported/dynamically screws, recompile them (Ctrl + Shift + click the run arrow) and keep them to update their dependencies.

  \\PAINESTORAGE\Engineering\Test & Software\AutoTest Software\Current Version\AutoTest of manufacturing...

  Extended details:

  Visit ni.com/ask support request page to learn more about the resolution of this problem. Use the following as a reference:

  Error 7 is is produced at ABAPI Dist report read link Info Error.vi-> ABAPI Dist Cmp parameters of disk Hier.vi-> ABAPI get File2.vi settings-> EBEP_Invoke_Build_Engine.vi-> EBUIP_Build_Invoke.vi-> EBUIP_Build_Rule_Editor.vi-> EBUIP_Item_OnDoProperties.vi-> EBUIP_Item_OnDoProperties.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File not found. The file may have been moved or deleted, or the path to the file would be incorrectly formatted for the operating system. For example, use- as Windows path separators: on Mac OS, and Linux. Check that the path is correct using the command prompt or file Explorer.

  =========================

  NOR-488: There is no Board of Directors.

  Problem has been solved-need to re - compile all VI and to link some missing files.

• error message saying a .dll file is missing when I try to acess Mngr.vdmdbg task not found.

  I have uninstalled or deleted my Windows XP Pro VDMDBG.dll because I received error messages after

  I am now using the same IDE on this DIY PC like what I used to have XP Pro running. I ran an upgrade or r disc install to resign the drivers and at the same time you run some programs to uninstall some of the OLD drivers of the motherboard and temporary files, but I must have too deep because now, I have only this error message telling me that a .dll file is missing when I try to acess Mngr.vdmdbg task was not found. Reinstalling the application may fix this problem. Where can I go to download or difficulty this annoyance file or program? Thankx again! -Al

  Sounds messy.

  If you see a message like this:

  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called vdmdbg when the name of the file should really be called vdmdbg.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  PS Microsoft support engineers - "try running sfc/scannow and check if it helps" will not replace the missing vdmdbg.dll file because it is not what sfc/scannow does.  If you want to see an experiment to prove that, let me know because I have a ready-made.