Local IP address

Similar Questions

• Am200 refuses a valid local (public) ip address (local ip address is not a valid address)

  Hi there, having some problems with my current ADSL line and planned on the secondary use of the am200 as a dsl modem to check if she behaves better under the adsl2 +.  But when I go to enter the desired local IP (94.30.x.x), subnet mask (255.255.255.248) turn off the dhcp server and click ok, I gives me the error 'local IP address is not a valid address' and unable to continue.  He of course will allow me to use private IP addresses, but this modem will not connect to my firewall/web server (i.e. 94.30.x.x + 1) I like the modem to be an imaginary ip address, but a real, routed.

  Before making a request for official support of linksys (now cisco), I thought I would check to see if someone has a possible solution.  I've just updated firmware for 1.19.02 and it still gives the same error.

  Thank you.

  Please delete this thread, using another firmware, I was able to select a real IP address.  I hope that linksys (cisco) will be realease an official firmware to solve this problem, but in the meantime, thanks for the work Geremia!

• Cannot SSH in vmware player (can use the local IP address but not external IP)

  As above

  Cannot SSH in vmware player (can use the local IP address but not external IP)

  Am new to vmware, so if you need information to help me on what you'll need to tell me how to get

  See you soon

  Vodkaholic27, let me start with the layoff of vodka for a bit and then set Virtual Machine network card to bridged and then assign a static IP address that is appropriate for the guest as the physical LAN operating system is the host.  Then in the local physical network for static IP address router you assigned in the guest OS configure it to allow Port Forwarding on the appropriate port.  Then, you will be able to access from outside local physical host network.  If it's just on the other system on the physical LAN to the host that you want to access the guest you need not set up the Port Forwarding on the router on the local physical host network, simply use linked by a bridge to the network adapter in the Virtual Machine.  If you use NAT to the NIC of the Virtual Machine, then you need to set Port Forwarding in the virtual network Editor.

  Note: The virtual network Editor is not installed by default in Vmware Player 3.x and later versions.

  ==========

  To install the missing virtual network Editor, the command prompt:

  VMware-player-*.exe -e c:\vmptmp
  

  Then in the c:\vmptmp folder find the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually 'C:\Program VMware Player' or ' C:\Program Files (x 86) \VMware\VMware Player.  You can create a shortcut and place it with the shortcut of VMware Player, if you want to access it more easily.  Note: there are some for all the files to be extracted to then access the network.cab file.

• Could not determine a local IP address for all Agent OnPlus of network into your current network.

  Hello

  I'm trying to activate a new device Onplus and I get the above error. I have factory reset the device, nothing helps. I can see the device got an IP via DHCP and can it ping. I can't seem to him via a web browser locally either.

  The device comes in the portal and also shows he discovered 2 routers. See the attached screenshots

  Can help?

  Thank you

  Sylvie

  Hi Rene,

  I took a look in the logs on failsafe.imageboot.com for the attempts of 64:00:F1:21:18:BC and found a few. Looks all but one came me or our support people.  The other came from an assigned IP address of Telecom NZ.  I hope it's you!  I was able to trigger a transfer successfully, others transferred zero byte.  I suspect that these were attempts to test the browsers and have been interrupted.

  On this basis, the ON100 can't the internet for some reason any.  It seems that none of the attempts several thousands of the device has reached the server.  This also explains why you do not see the activation input, which depends on the ON100 showing its status to our activation service.

  So, we need to understand why the device is not able to access the internet.  It could be that he does not have a gateway or a DNS from DHCP sevrers or there is a filter on the outgoing path, or maybe bad material.

  As you have the IP address, you can get a computer configured the same way (via the same DHCP server, switch, etc.) and see if you can access the URL above?  It must return a file of 45,086,817 bytes.

  Andy

• move the local ip address to a different server (problem natting)

  Dear,

  I have a local database server with a local ip 192.168.101.3 and cisco ASA 5500, I use nat static as below:

  #static (Interior, exterior) xx.xx.xx.xx 192.168.101.3 netmask 255.255.255.255

  the server has been broken, and we moved the data to another server and give him the exact address of the intellectual property.

  Now we can ping the actual ip side.

  Help, please.

  Thanks in advance.

  Hello Asad,

  I've seen this problem before, hosts with the firewall or anti virus windows will not respond to any other host that is not on their Local network.

  Customer think usually it is a question of ASA, but as soon as we set up a NAT (OUTSIDE) 10 your_public_ip

  Global (inside) 10 interface;   We can see how it works because the server will now receive the packets of the SAA within the interface

  Anyway glad to hear it works fine.

  Please check the question as answered so future users can pull of this

  Julio

• Cisco ASA 5515 - Anyconnect users can connect to ASA, but cannot ping inside the local IP address

  Hello!

  I have a 5515 ASA with the configuration below. I have configure the ASA as remote access with anyconnect VPN server, now my problem is that I can connect but I can not ping.

  ASA Version 9.1 (1)

  !

  ASA host name

  domain xxx.xx

  names of

  local pool VPN_CLIENT_POOL 192.168.12.1 - 192.168.12.254 255.255.255.0 IP mask

  !

  interface GigabitEthernet0/0

  nameif inside

  security-level 100

  192.168.11.1 IP address 255.255.255.0

  !

  interface GigabitEthernet0/1

  Description Interface_to_VPN

  nameif outside

  security-level 0

  IP 111.222.333.444 255.255.255.240

  !

  interface GigabitEthernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/4

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/5

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  management only

  nameif management

  security-level 100

  192.168.5.1 IP address 255.255.255.0

  !

  passive FTP mode

  DNS server-group DefaultDNS

  www.ww domain name

  permit same-security-traffic intra-interface

  the object of the LAN network

  subnet 192.168.11.0 255.255.255.0

  LAN description

  network of the SSLVPN_POOL object

  255.255.255.0 subnet 192.168.12.0

  VPN_CLIENT_ACL list standard access allowed 192.168.11.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  management of MTU 1500

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 711.bin

  don't allow no asdm history

  ARP timeout 14400

  no permit-nonconnected arp

  NAT (exterior, Interior) static source SSLVPN_POOL SSLVPN_POOL static destination LAN LAN

  Route outside 0.0.0.0 0.0.0.0 111.222.333.443 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  WebVPN

  list of URLS no

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  AAA authentication http LOCAL console

  LOCAL AAA authorization exec

  Enable http server

  http 192.168.5.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec pmtu aging infinite - the security association

  Crypto ca trustpoint ASDM_TrustPoint5

  Terminal registration

  E-mail [email protected] / * /

  name of the object CN = ASA

  address-IP 111.222.333.444

  Configure CRL

  Crypto ca trustpoint ASDM_TrustPoint6

  Terminal registration

  domain name full vpn.domain.com

  E-mail [email protected] / * /

  name of the object CN = vpn.domain.com

  address-IP 111.222.333.444

  pair of keys sslvpn

  Configure CRL

  trustpool crypto ca policy

  string encryption ca ASDM_TrustPoint6 certificates

  Telnet timeout 5

  SSH 192.168.11.0 255.255.255.0 inside

  SSH timeout 30

  Console timeout 0

  No ipv6-vpn-addr-assign aaa

  no local ipv6-vpn-addr-assign

  192.168.5.2 management - dhcpd addresses 192.168.5.254

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL-trust outside ASDM_TrustPoint6 point

  WebVPN

  allow outside

  CSD image disk0:/csd_3.5.2008-k9.pkg

  AnyConnect image disk0:/anyconnect-win-3.1.04066-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client

  internal VPN_CLIENT_POLICY group policy

  VPN_CLIENT_POLICY group policy attributes

  WINS server no

  value of server DNS 192.168.11.198

  VPN - 5 concurrent connections

  VPN-session-timeout 480

  client ssl-VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list VPN_CLIENT_ACL

  myComp.local value by default-field

  the address value VPN_CLIENT_POOL pools

  WebVPN

  activate AnyConnect ssl dtls

  AnyConnect Dungeon-Installer installed

  AnyConnect ssl keepalive 20

  time to generate a new key 30 AnyConnect ssl

  AnyConnect ssl generate a new method ssl key

  AnyConnect client of dpd-interval 30

  dpd-interval gateway AnyConnect 30

  AnyConnect dtls lzs compression

  AnyConnect modules value vpngina

  value of customization DfltCustomization

  internal IT_POLICY group policy

  IT_POLICY group policy attributes

  WINS server no

  value of server DNS 192.168.11.198

  VPN - connections 3

  VPN-session-timeout 120

  Protocol-tunnel-VPN-client ssl clientless ssl

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list VPN_CLIENT_ACL

  field default value societe.com

  the address value VPN_CLIENT_POOL pools

  WebVPN

  activate AnyConnect ssl dtls

  AnyConnect Dungeon-Installer installed

  AnyConnect ssl keepalive 20

  AnyConnect dtls lzs compression

  value of customization DfltCustomization

  username vpnuser password PA$ encrypted $WORD

  vpnuser username attributes

  VPN-group-policy VPN_CLIENT_POLICY

  type of remote access service

  Username vpnuser2 password PA$ encrypted $W

  username vpnuser2 attributes

  type of remote access service

  username admin password ADMINPA$ $ encrypted privilege 15

  VPN Tunnel-group type remote access

  General-attributes of VPN Tunnel-group

  address VPN_CLIENT_POOL pool

  Group Policy - by default-VPN_CLIENT_POLICY

  VPN Tunnel-group webvpn-attributes

  the aaa authentication certificate

  enable VPN_to_R group-alias

  type tunnel-group IT_PROFILE remote access

  attributes global-tunnel-group IT_PROFILE

  address VPN_CLIENT_POOL pool

  Group Policy - by default-IT_POLICY

  tunnel-group IT_PROFILE webvpn-attributes

  the aaa authentication certificate

  enable IT Group-alias

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  inspect the icmp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  : end

  Help me please! Thank you!

  Hello

  Please set ACLs to allow ICMP between these two subnets (192.168.11.0 and 192.168.12.0) and check. It should ping. Let me know if it does not work.

  Thank you

  swap

• [View 5.3] Connection to security through Blast Server redirected to the Local IP address private view Desktop in Google Chrome

  Hello

  I am currently facing a questions in my test harness which happens when I connect to public IP address on server security by the breath. No problem if I connect using view Client.

  Using the breath, I can log on, select a desktop view, then the url of the Web page showing my ip Server security for about 10 seconds and then I was redirected to the private IP address of NAT from the desktop view target and of course I couldn't connect.

  

  Note: The local private ip address redirection does not happens if I configured to connect to show the connection to the server through breath.

  I have:

  • Self-signed SSL installed without warnings
  • activated the tunnel to connect to the server
  • Tunneling on server security enabled
  • disabled all firewall for testing purposes
  • locally defined in the host file to resolve my domain name full of security server static IP used in my office. (vsecurity.icliq.com in this case)
  • required ports are configured with port forwarding in my router from office

  

  I hope someone could throw some light on this issue. Thank you

  
  

  Eddy
  

  Yes, the option of Blast Secure Gateway is used to ensure that Blast connections are routed from your browser by the server security (or connect to the server). That's what you want to access remotely. If you do not select this option, Blast connections will be direct to your virtual desktop. This is for internal connections.

  It goes the same for PCoIP and PCoIP Secure Gateway.

  Mark

• What is the link-local IPv6 address?

  It shows that after thte IPv6 address: fe80:f0a2f0c4:6892:bf3 11%

  There are two forms of protocols Internet (IP), (former) IPv4 and IPv6 (the more recent).  IPv6 was created because of the need for an expanded on the Internet addressing scheme.  IPv4 address approaching the limit on no. of the places that could be addressed in a unique way, so IPv6 was created to solve the problem.  It is not something you normally bother you on.

  I hope this helps.  Good luck.

• Local IP addresses

  If a machine with several IP - addresses is it possible to get the list of IPs available with AIR 2.0? Finally I need to use one of them with my Socket connection.

  Hello

  For a list of IP address of a machine, you can use something like this:

  protected function listIpAddress (): void

  {

  ifaces var: Vector. = NetworkInfo.networkInfo.findInterfaces ();

  for each (var iface: NetworkInterface in ifaces)

  {

  var listInterfaces: Vector. = iface.addresses;

  for each (var interfaceAddress: InterfaceAddress to listInterfaces)

  {

  trace ("address:" + interfaceAddress.address);

  trace ("broadcast:" + interfaceAddress.broadcast);

  trace ("IP Version:" + interfaceAddress.ipVersion);

  }

  }

  }

  Concerning

• 3 RV320 VPN with a local IP address

  Hello..

  I have 3 RV320 routers, I try to connect by VPN all routers together, the problem is I have a server on a single router 192.168.1.200 and I need to connect the terminals to the other routers on the internet...

  any suggestion?

  Connect VPN tunnels between all 3 units.  Please keep in mind that subnets are different.  Get close to the tunnel.  Ping 192.168.1.200 at two remote sites to verify connectivity.  Try the terminals.

• get the local host ip address

  For the convience of the end user, I would like to publish the ip address of the host on the front panel of the progr.  Is there a vi or something that will return the local ip address?

  See this post:

  http://forums.NI.com/T5/LabVIEW/hOW-to-find-the-IP-address-of-a-system/TD-p/784636

• ASA 5510 VPN - using a public IP address for the local network

  Hello, I have a problem which is probably very simple, but I can't seem to understand.

  I set up a site IPsec connection to another with a company, something I've done many times before without a problem. I use ASDM to configure this, because it is quick and painless, usually.

  We have one number of other site-to-site currently configured connections and works very well on this ASA, these are configured with the "Protected network - LAN" configured with the IP private of hosts within our network, we want to make available through the separate tunnels. This includes the configuration setting on our ASA for each connection to "guests aside ASA exempt from NAT.

  With this new link, however, the company asked us to use a public IP address for the host that we want to achieve through the tunnel. I don't know why, but they demand it. So I added a NAT rule for inside the host and set up the connection with the public IP address under "Local network". During the test to try to reach a host to their side, the tunnel didn't even try to open.

  What is the method here? I don't see where I'm wrong. I'm guessing that the 'host side ASA exempt from NAT' does not require for this, how if the ASA would know which internal host is the public IP address.

  Any ideas?

  Hi Leo,

  The steps are:

  1. Add the policy rule NAT for the specific host.

  2 - define the IP NAT as your LOCAL NETWORK address in the encryption settings.

  3 make sure that there is no rule NAT exempt for this host to the specific destination.

  What happens if you run a package tracer?

  Thank you.

• How to change the local IP on the virtual NETWORK adapter for Web server address

  Hi all

  I have a physical Windows system, on which I run VMware Workstation 9. Now on VMware I run Ubuntu 12.10 a LAMP for a Web server.
  Problem:
  Now, my local IP address for my NETWORK card virtual (using the Ubuntu one) at the address 192.168.159.7 and my router only emits the 10.0.0.x range IP addresses. So if I want to port forward to the virtual NETWORK adapter that has a 192.168 address, I can't, so my LAMP Web server are not accessible to the outside because the router does not send packets on port 80 to the virtual card... How to fix this?
  The only way I guess that is to be assigned an ip address of 10.0.0.x to the virtual NETWORK adapter?
  But how do I do this?
  I tried to do it on the host from the Windows machine with "get my IP address automatically", but she emits an 192.168 address every time...
  Thank you

  Welcome to the community,

  I guess that the virtual computer is currently configured to "NAT" or "Host-Only' networking! That would explain the 192.168.x.x IP address.

  There are 2 options to be able to access the web server on the virtual computer.

  1. with "NAT" network configured

  In this case forward port 80 to the IP address of the host and configure the port forwarding on the virtual computer in the "Virtual Network Editor. This way you can leave the IP address on the private network of 192 (if it is currently set to NAT)

  2. use "Bridged" network layout

  Reconfigure the virtual NETWORK adapter to the machine virtual networking "Bridged" within the parameters of the virtual machine, assign an IP address from your router network (10.x.x.x) and do the port forwarding on the router directly to the IP address of the virtual machine.

  André

• How can I easily count the number of contacts in my address book?

  Is there anyway to make the address book show the number of contacts?

  When I click on a folder, it shows all the contacts in the folder, but I can't see any display of the total number of contacts - if I want to know I have to laboriously count everyone!

  Thanks for the tips on this

  Here, if I select a local internal address book example of the PAB, it tells me in the status bar how many Contacts it contains.

  Maybe your status bar is disabled?

  In the address book, alt + v, view, toolbars, select Status bar.

• Satellite L750D - MAC address change by itself

  Satellite L750D/L755D 18mths old.
  Restarted this morning after the weekend and cable NIC MAC address has chnaged.

  Started in windows and could see a different value to Friday (as we control access through MAC address and was blocked).
  Started in normal Linux (Ubuntu 12.04) and a different MAC address again.

  NIC seems to work fine with whatever he chooses - but how MAC address can be change by itself?

  > NIC seems to work fine with whatever he chooses - but how MAC address can be change by itself?

  The physical MAC address is not editable, but there are a few ways to spoof the mac address
  For example, using Windows XP, the MAC address can be changed in the properties of the Ethernet adapter. On the Advanced tab, under "MAC address", "Locally administered address", "Ethernet address" or "network address". The name of this option depends on the Lan driver that is installed on your laptop. And important note; not all drivers are supported changing the MAC address of this way.

  In addition the system registry key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} contains some parameters of the network interface and the option called NetworkAddress will serve to set the MAC address.

  There are also tools that could spoof the address MAC for example, SMAC MAC Address Changer.
  Finally and above all some routers provide an option to change the MAC address.