local network 1 Console VCS configuration

Similar Questions

• (Connection to the local network) is not a valid IP configuration when you try to share internet via ethernet

  I shared my wireless network connection to my laptop with my Tower and I tried to change some things static ip and now my turn gets no internet at all. Here is my ip config for my laptop

  Windows IP configuration

  Name of the host...: Piro-PC

  Primary Dns suffix...:

  Type of node...: peer-to-peer

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Atheros AR5008X Wireless Network adapt

  Physical address.... : 00-1F-3A-8E-D9-DC

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::a11b:747:8de1:c32a % 11 (Preferred)

  IPv4 address: 192.168.1.113 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Saturday, November 10, 2012 18:52:10

  End of the lease...: Sunday, November 11, 2012 19:14:35

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 218111802

  DHCPv6 DUID customer...: 00-01-00-01-13-C9-24-20-00-17-42-BC-C1-D3

  DNS servers...: 75.75.75.75

  75.75.76.76

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :

  ... Description: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller

  Physical address.... : 00-17-42-BC-C1-D3

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::283a:df5d:cf7a:d0ae % 10 (Preferred)

  Autoconfiguration IPv4 address. . : 169.254.208.174 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 234886978

  DHCPv6 DUID customer...: 00-01-00-01-13-C9-24-20-00-17-42-BC-C1-D3

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {B2EC9B12-C460-46DE-A9CC-9B8551AF0AF3}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {E818BF11-C224-432F-B7C0-3F2949FAADF8}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Adapter Microsoft ISATAP #3

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 16:

  The connection-specific DNS suffix. :

  Description...
  . : Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:9d38:953c:1893:f6:e7eb:e988 (Preferred)
  Address IPv6 local link...: fe80::1893:f6:e7eb:e988% 23 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Ethernet has no default gateway so he does not know where to look for information.  Its IP address indicates he can't get an IP address to the router, or the external DHCP/DNS servers.

  Go to network & share > change adapter settings > Ethernet > properties >... Enter the IP Address of the gateway by default even in wifi.

• On the configuration of local network for M40 series

  Dear Toshiba

  I downloaded the driver of LAN of your site and installed.

  I always have a problem with my network integrated port to work with my local network, despite I can use the DSL cable with the same port and internet access.

  the integrated network is enable with Device Manager and when I checked with your "Toshiba Pc Diagonistic" utility, the result with the 'network' is "Fail".

  all recommendations

  Hi Mohamed

  Well, I m bit confused. I'm going by what you have created a Local network.
  In this case, the TCP/IP protocol must be installed. Additionally if the IP address is not automatically applied, you have to put (also the subnet mask, gateway).
  However, you can try to use the fix in the Local area connection status.
  In this case, you should in order to make a right click on the connection to the Local network-> status and repair.

  Besides if this procedure doesn't solve this problem, please give us more detailed information.

  Best regards

• VmWare Workstation 6.5.1 - local network configuration problem

  Hi guys!

  I have a server with 2 lan card hardware. First of all in the DMZ (10.10.10.X) and the second in LAN (192.68.100.X)

  I started 3 virtual machine with Windows 2003 server.

  SERVER (PDC): 1 Lan (in Lan) cards

  SERVER B (SQL): 2 Lan (Lan 1, 1 private SERVER C network) card

  C (WEB) SERVER: 2 lan card (1 in the DMZ, in private network with SERVER B 1)

  I create 1 BRIDGE with VMNet0, 1 lan private VMNet2

  The problem is when I put the lan card 2 in the same group lan becouse ServerB VMNet2 not ping server C (I test the ping with the installation of DHCP and the static IP... but nothing!)

  What I see, your DMZ network is connected to VMnet2:

  Regarding your screenshot of the VMWare Virtual Network editor VMnet2 is connected to the Broadcom and your first post regarding your host has a NETWORK card in the local network (192.168.100.0) and the other in the demilitarized zone (10.10.10.0). --> VMNet2is is connected to your local network or demilitarized zone (that is why I needed the ipconfig host as well, but you don't post it).

  I guess the Broadcom's DMZ for now.

  This means that if VMnet2 is considered to be the DMZ with 192.168.200.0 (look at Server C) which do not function as it relates to the Broadcom with 10.10.10.0.

  Server c:

  He must have a card in the demilitarized zone (on the name) who has an IP address of 192.168.200.2. It does not not 10.10.10.x? If this is the adapter that uses VMnet2 which does not work.

  ServerB:

  Server B seems to have the correct IP addresses, but it has no way to reach C because it has no address of 192.168.200.x.

  If you really want to have a private connection (no DMZ) between B and C, private by VMnet1 card and use the IPS that VMware provides for this network.

  I guess you want like this:

  LAN (192.168.100.0) - B - VMnet1 (private/host-only/192.168.200.0)---C---DMZ (via VMnet2 jumpered to Broadcom 10.10.10.0)

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• AnyConnect client can not access local network

  Hello

  I have a problem with the Cisco anyconnect. Once clients are connected they cannot access anything whatsoever, including their default gateway.

  Pool of the VPN client is on the same subnet as the LAN (139.16.1.x/24). Local network clients can access DMZ, VPN clients can ping computers on the local network, but they cannot access the DMZ.

  I guess that any rule providing that traffic is absent but I m new with Cisco ASA and I m totally lost. I read as much as I could on this topic, but I do not understand which rule is necessary.

  Thank you very much in advance for your support.

  ASA release 9.4 (1)
  !
  ciscoasa hostname
  activate the encrypted password of WmlxhdtfAnw9XbcA
  TA.qizy4R//ChqQH encrypted passwd
  names of
  mask 139.16.1.50 - 139.16.1.80 255.255.255.0 IP local pool Pool_139
  !
  interface GigabitEthernet1/1
  nameif outside
  security-level 0
  192.168.1.100 IP address 255.255.255.0
  !
  interface GigabitEthernet1/2
  nameif inside
  security-level 100
  IP 139.16.1.1 255.255.255.0
  !
  interface GigabitEthernet1/3
  nameif DMZ
  security-level 50
  IP 172.16.1.1 255.255.255.0
  !
  interface GigabitEthernet1/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet1/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet1/6
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet1/7
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet1/8
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  Management1/1 interface
  management only
  nameif management
  security-level 100
  11.11.11.11 IP address 255.255.255.0
  !
  passive FTP mode
  network obj_any object
  subnet 0.0.0.0 0.0.0.0
  internal subnet object-
  139.16.1.0 subnet 255.255.255.0
  network dmz subnet object
  subnet 172.16.1.0 255.255.255.0
  wialon Server external ip network object
  Home 192.168.1.132
  wialon-Server network objects
  Home 172.16.1.69
  Wialon-service-TCP object service
  destination tcp source between 1 65535 21999 20100 service range
  Wialon-service-UDP object service
  destination service udp source between 0 65535 21999 20100 range
  network of the NETWORK_OBJ_139.16.1.0_25 object
  subnet 139.16.1.0 255.255.255.128
  outside_acl list extended access permit tcp any object wialon-Server eq www
  outside_acl list extended access allowed object Wialon-service-TCP any wialon-server object
  outside_acl list extended access allowed object Wialon-service-UDP any wialon-server object
  pager lines 24
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 DMZ
  management of MTU 1500
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) static source any any static destination NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 non-proxy-arp-search to itinerary
  !
  network obj_any object
  dynamic NAT (all, outside) interface
  internal subnet object-
  NAT dynamic interface (indoor, outdoor)
  wialon-Server network objects
  NAT (DMZ, external) service wialon Server external ip static tcp www www
  Access-group outside_acl in interface outside
  Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  identity of the user by default-domain LOCAL
  Enable http server
  http 11.11.11.0 255.255.255.0 management
  http 139.16.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  service sw-reset button
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  Crypto ca trustpoint ASDM_TrustPoint0
  registration auto
  domain name full ciscoasa.srdongato.null
  E-mail [email protected] / * /
  name of the object CN = srdongato
  Serial number
  Proxy-loc-transmitter
  Configure CRL
  Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
  registration auto
  full domain name no
  name of the object CN = 139.16.1.1, CN = ciscoasa
  ASDM_LAUNCHER key pair
  Configure CRL
  trustpool crypto ca policy
  string encryption ca ASDM_TrustPoint0 certificates
  certificate 09836256
  30820381 30820269 a0030201 02020409 83625630 0d06092a 864886f7 0d 010105
  05003050 31123010 06035504 03130973 72646f6e 6761746f 313 has 3012 06035504
  05130b4a a 41443139 32323033 34343024 06092, 86 01090216 17636973 4886f70d
  636f6173 612e7372 646f6e67 61746f2e 6e756c6c 31353132 30353036 301e170d
  5a170d32 33333535 35313230 32303633 3335355a 30503112 30100603 55040313
  09737264 6f6e6761 30120603 55040513 31393232 30333434 0b4a4144 746f313a
  2a 864886 30240609 f70d0109 6973636f 02161763 6173612e 7372646f 6e676174
  6f2e6e75 6c6c3082 0122300d 06092 has 86 01010105 00038201 0f003082 4886f70d
  010a 0282 010100d 2 295e679c 153e8b6a d3f6131d 8ea646e3 aa0a5fa9 20e49259
  ca895563 7e818047 033a4e8f 57f619e9 fa93bfd5 6c44141f b0abf2c0 8b86334e
  bac63f41 99e6d676 c689dcf7 080f2715 038a8e1b 694a00de 7124565e a1948f09
  8dbeffab c7c8a028 741c5b10 d0ede5e9 599f38fe 5b88f678 4decdc4b b 353, 6708
  cfa2fbce f58be06e 18feba56 4b2b04a1 77773ec6 5c58d2ed d7ca4f17 980f0353
  138bfe65 1b1165e6 7b6f94bb ab4d4286 e900178c 147a6dba 2427f38e e225030f
  0a66d1eb 5075c57e 6d77e5bb 247f5bc3 8d3530f0 49dedf2d 21a24b5f daa08d98
  690183cf e82a6b8d 5e489956 c5eecdbc 7fc2365c b629a52b 126b51e2 18590ed5
  c9da8503 a639f102 03010001 a3633061 300f0603 551d 1301 01ff0405 30030101
  ff300e06 03551d0f 0101ff04 86301f06 04030201 23 04183016 80143468 03551d
  dec79103 0a91b530 1ada7e47 7e27b16d 4186301d 0603551d 0e041604 143468de
  c791030a 91b5301a da7e477e 27b16d41 86300d 86f70d01 01050500 06 092 a 8648
  003cdb04 03820101 8ef5ed31 c05c684b ad2b0062 96bfd39a ecb0a3fe 547aebe5
  14b753e7 89f55827 3d4e0aa8 b8674e45 80d4c023 8e99a7b4 0907d 347 060a2fe4
  fa6e0c2f 3b9cd708 a539c09f 7022d2ee fb6e2cf6 82b0e861 a2839a71 1512b3ec
  e28664e9 732270c 9 d1c679d9 1eaf2ad5 31c3ff97 09aae869 88677a3d b 007, 5699
  ecb3032e 2dd0f74f 81f9a8fb 79f30809 723bbdbf dfef4154 5ad6b012 a8f37093
  481fa678 b44b0290 23390036 042828f3 5eefdc43 ebe52d26 78934455 9b4234a9
  4146 166e5adc b431f12f 8d0fbf16 46306228 731c bfeebc43 34 76984 d2e6ebbc
  88ca120a 96838694 d4f32884 963e7385 987ec6b0 dfa28d49 05ba5fa8 641bcfc7
  ff92ac3c 52
  quit smoking
  string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
  Certificate 0 is 836256
  308202cc a0030201 0202040a 0d06092a 83625630 864886f7 0d 010105 308201b 4
  05003028 06035504 03130863 61736131 13301106 03550403 6973636f 3111300f
  130a 3133 392e3136 2e312e31 31353132 30353036 35363236 5a170d32 301e170d
  35313230 32303635 3632365a 30283111 55040313 08636973 636f6173 300f0603
  61311330 11060355 0403130 3133392e 31362e31 2e313082 0122300d 06092 has 86
  4886f70d 01010105 00038201 0f003082 010 has 0282 010100e7 a5c16e86 16c15a10
  e018b868 bac7271a 30f1a3f8 ecb9c6b8 3ed4b1ad c9468f5e 287f2a7a 644f1496
  c43a061e da927d09 a755b53e ed7c6a66 f2f1fb1e f944345c 86e08ce0 891c99b3
  13101ab3 04963fad f91f987f 99f22a89 cd1e8c5a 5e4c026d 2cadd7b7 6620bbd1
  b4a5135b 24ec886f fa061a06 dd536e96 1e483730 756c 4101 23f83a8d 944a7fbe
  93c51d56 32ac0d17 ceb75f63 0ae24f07 f2c54e83 5b84ff00 16b0b899 c925c737
  1765b 066 23 b 54645 bc419684 d09dd130 c1479949 68b0a779 df39b078 6fb0deb9
  758b14c3 f0801faf f0ad60e1 a018ffba d769f867 3fe8e5fc 88ccc5b2 2319f5d4
  617a78c4 74e7a64b 5c68276c 06ea57c1 d0ffce4b 358c4d02 03010001 300 d 0609
  2a 864886 05050003 82010100 dff97c9f 4256fd47 8eb661fd d22ecea4 f70d0101
  589eff09 958e01f1 a435a20e 5ed1cf19 af42e54d d61fc0ab cb2ee7ac 7fcb4513
  1a44cc86 1e020d72 3a3f78d2 4 d 225177 857093d 9 f5fcf3c7 6e656d2b 54a0c522
  f636b8cf 33c5ae34 ea340f32 85dff4c1 50165e7a e94de10b ced15752 0b3a76c1
  2a50777b 20291106 a1a8a214 a 8 003716 680c15d4 ac3f7cc7 378f8f5f 38e3403f
  f958c095 e549c8ed 4baf8cc5 bdcd230e 260754ea 953c3a4c eb01fef5 62b97e01
  9f82ce6b f479dbdd 000c45af 8758b35f b4a958ee 32c4db3f 2ddc7385 dc05b0e3
  78b609ba a9280841 2433ae87 5dd7a7c2 d5691068 1dc0eddc c23f99c5 3df8b1a5
  aadbd82a 423f4ba8 563142bf 742771c 3
  quit smoking
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 activate out of service the customer port 443
  Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
  Telnet 139.16.1.0 255.255.255.0 inside
  Telnet 11.11.11.0 255.255.255.0 management
  Telnet timeout 5
  without ssh stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 172.16.1.69 - DMZ 172.16.1.69
  dhcpd dns 87.216.1.65 87.216.1.66 DMZ interface
  dhcpd option 3 ip 172.16.1.1 DMZ interface
  dhcpd enable DMZ
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  SSL-trust outside ASDM_TrustPoint0 point
  SSL-trust ASDM_Launcher_Access_TrustPoint_0 inside point
  Trust ASDM_Launcher_Access_TrustPoint_0 inside the vpnlb-ip SSL-point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-3.1.12020-k9.pkg 1
  AnyConnect profiles Wialon_client_profile disk0: / Wialon_client_profile.xml
  AnyConnect enable
  tunnel-group-list activate
  Disable error recovery
  internal GroupPolicy_Wialon group strategy
  attributes of Group Policy GroupPolicy_Wialon
  WINS server no
  value of 192.168.1.1 DNS server
  client ssl-VPN-tunnel-Protocol ikev2
  by default no
  WebVPN
  AnyConnect value Wialon_client_profile type user profiles
  dynamic-access-policy-registration DfltAccessPolicy
  wialon_1 Wy2aFpAQTXQavfJD username encrypted password
  wialon_2 4STJ9bvyWxOTxIyH encrypted password username
  remote access to Wialon tunnel-group type
  attributes global-tunnel-group Wialon
  address pool Pool_139
  Group Policy - by default-GroupPolicy_Wialon
  tunnel-group Wialon webvpn-attributes
  enable Wialon group-alias
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:447ec315ae30818a98f705fb1bf3fd75

  Hello

  You don't have NAT exemption the DMZ network to the pool of VPN traffic.

  Please try to add the following statement to run:

  nat (DMZ,outside) 1  source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup

  Also please delete the existing instruction manual nat "non-proxy-arp" statement, because it can cause problems like you the ip subnet address pool is identical to that of the Interior of the network.

  no nat (inside,outside) source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 no-proxy-arp route-lookup
  
  nat (inside,outside) 1 source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
  
  

  Cordially Véronique

• remote VPN and vpn site to site vpn remote users unable to access the local network

  As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

  The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

  ASA Version 8.2 (2)
  !
  host name
  domain kunchevrolet
  activate r8xwsBuKsSP7kABz encrypted password
  r8xwsBuKsSP7kABz encrypted passwd
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  PPPoE client vpdn group dataone
  IP address pppoe
  !
  interface Ethernet0/1
  nameif inside
  security-level 50
  IP 192.168.215.2 255.255.255.0
  !
  interface Ethernet0/2
  nameif Internet
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  management only
  !
  passive FTP mode
  clock timezone IST 5 30
  DNS server-group DefaultDNS
  domain kunchevrolet
  permit same-security-traffic intra-interface
  object-group network GM-DC-VPN-Gateway
  object-group, net-LAN
  access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
  tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 Internet
  IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  enable ASDM history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  AAA authentication enable LOCAL console
  LOCAL AAA authentication serial console
  Enable http server
  x.x.x.x 255.255.255.252 out http
  http 192.168.215.0 255.255.255.252 inside
  http 192.168.215.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dynmap 65500 transform-set RIGHT
  card crypto 10 VPN ipsec-isakmp dynamic dynmap
  card crypto VPN outside interface
  card crypto 10 ASA-01 set peer 221.135.138.130
  card crypto 10 ASA - 01 the transform-set RIGHT value
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  the Encryption
  sha hash
  Group 2
  lifetime 28800
  Telnet 192.168.215.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  management-access inside
  VPDN group dataone request dialout pppoe
  VPDN group dataone localname bb4027654187_scdrid
  VPDN group dataone ppp authentication chap
  VPDN username bb4027654187_scdrid password * local store
  interface for identifying DHCP-client Internet customer
  dhcpd dns 218.248.255.141 218.248.245.1
  !
  dhcpd address 192.168.215.11 - 192.168.215.254 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Des-sha1 encryption SSL
  WebVPN
  allow outside
  tunnel-group-list activate
  internal kun group policy
  kun group policy attributes
  VPN - connections 8
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel
  kunchevrolet value by default-field
  test P4ttSyrm33SV8TYp encrypted password username
  username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
  username kunauto attributes
  Strategy Group-VPN-kun
  Protocol-tunnel-VPN IPSec
  tunnel-group vpngroup type remote access
  tunnel-group vpngroup General attributes
  address pool VPN_Users
  Group Policy - by default-kun
  tunnel-group vpngroup webvpn-attributes
  the vpngroup group alias activation
  vpngroup group tunnel ipsec-attributes
  pre-shared key *.
  type tunnel-group test remote access
  tunnel-group x.x.x.x type ipsec-l2l
  tunnel-group ipsec-attributes x.x.x.x
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
  : end
  kunauto #.

  Hello

  Looking at the configuration, there is an access list this nat exemption: -.

  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

  But it is not applied in the States of nat.

  Send the following command to the nat exemption to apply: -.

  NAT (inside) 0 access-list sheep

  Kind regards

  Dinesh Moudgil

  P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

• Client remote access VPN gets connected without access to the local network

  : Saved

  :

  ASA 1.0000 Version 2

  !

  hostname COL-ASA-01

  domain dr.test.net

  turn on i/RAo1iZPOnp/BK7 encrypted password

  i/RAo1iZPOnp/BK7 encrypted passwd

  names of

  !

  interface GigabitEthernet0/0

  nameif outside

  security-level 0

  IP 172.32.0.11 255.255.255.0

  !

  interface GigabitEthernet0/1

  nameif inside

  security-level 100

  IP 192.9.200.126 255.255.255.0

  !

  interface GigabitEthernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/4

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/5

  nameif failover

  security-level 0

  192.168.168.1 IP address 255.255.255.0 watch 192.168.168.2

  !

  interface Management0/0

  nameif management

  security-level 0

  192.168.2.11 IP address 255.255.255.0

  !

  passive FTP mode

  DNS server-group DefaultDNS

  domain dr.test.net

  network of the RAVPN object

  192.168.0.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.200.0_24 object

  192.168.200.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.9.200.0_24 object

  192.9.200.0 subnet 255.255.255.0

  the inside_network object-group network

  object-network 192.9.200.0 255.255.255.0

  external network object-group

  host of the object-Network 172.32.0.25

  Standard access list RAVPN_splitTunnelAcl allow 192.9.200.0 255.255.255.0

  access-list extended test123 permit ip host 192.168.200.1 192.9.200.190

  access-list extended test123 permit ip host 192.9.200.190 192.168.200.1

  access-list extended test123 allowed ip object NETWORK_OBJ_192.168.200.0_24 192.9.200.0 255.255.255.0

  192.9.200.0 IP Access-list extended test123 255.255.255.0 allow object NETWORK_OBJ_192.9.200.0_24

  pager lines 24

  management of MTU 1500

  Outside 1500 MTU

  Within 1500 MTU

  failover of MTU 1500

  local pool RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 IP mask

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 66114.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) source Dynamics one interface

  NAT (it is, inside) static static source NETWORK_OBJ_192.9.200.0_24 destination NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.9.200.0_24

  Route outside 0.0.0.0 0.0.0.0 172.32.0.2 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  Enable http server

  http 0.0.0.0 0.0.0.0 outdoors

  http 0.0.0.0 0.0.0.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint ASDM_TrustPoint0

  Terminal registration

  name of the object CN = KWI-COL-ASA - 01.dr.test .net, C = US, O = KWI

  Configure CRL

  Crypto ikev1 allow outside

  IKEv1 crypto policy 10

  authentication crack

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 20

  authentication rsa - sig

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 40

  authentication crack

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 50

  authentication rsa - sig

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 60

  preshared authentication

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 70

  authentication crack

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 80

  authentication rsa - sig

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 100

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 110

  authentication rsa - sig

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 120

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 130

  authentication crack

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 140

  authentication rsa - sig

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 150

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 65535

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet 192.9.200.0 255.255.255.0 inside

  Telnet timeout 30

  SSH 0.0.0.0 0.0.0.0 management

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH 66.35.45.128 255.255.255.192 outside

  SSH 0.0.0.0 0.0.0.0 inside

  SSH timeout 30

  SSH version 2

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  internal RAVPN group policy

  RAVPN group policy attributes

  value of server WINS 192.9.200.164

  value of 66.35.46.84 DNS server 66.35.47.12

  VPN-filter value test123

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value test123

  Dr.kligerweiss.NET value by default-field

  username test encrypted password xxxxxxx

  username admin password encrypted aaaaaaaaaaaa privilege 15

  vpntest Delahaye of encrypted password username

  type tunnel-group RAVPN remote access

  attributes global-tunnel-group RAVPN

  address RAVPN pool

  Group Policy - by default-RAVPN

  IPSec-attributes tunnel-group RAVPN

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  Review the ip options

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory 2

  Subscribe to alert-group configuration periodic monthly 2

  daily periodic subscribe to alert-group telemetry

  aes encryption password

  Cryptochecksum:b001e526a239af2c73fa56f3ca7667ea

  : end

  COL-ASA-01 #.

  Here is a shot made inside interface which can help as well, I've tried pointing the front door inside the interface on the target device, but I think it was a switch without ip route available on this subject I think which is always send package back to Cisco within the interface

  Test of Cape COLLAR-ASA-01 # sho | in 192.168.200

  25: 23:45:55.570618 192.168.200.1 > 192.9.200.190: icmp: echo request

  29: 23:45:56.582794 192.168.200.1.137 > 192.9.200.164.137: udp 68

  38: 23:45:58.081050 192.168.200.1.137 > 192.9.200.164.137: udp 68

  56: 23:45:59.583176 192.168.200.1.137 > 192.9.200.164.137: udp 68

  69: 23:46:00.573517 192.168.200.1 > 192.9.200.190: icmp: echo request

  98: 23:46:05.578110 192.168.200.1 > 192.9.200.190: icmp: echo request

  99: 23:46:05.590057 192.168.200.1.137 > 192.9.200.164.137: udp 68

  108: 23:46:07.092310 192.168.200.1.137 > 192.9.200.164.137: udp 68

  115: 23:46:08.592468 192.168.200.1.137 > 192.9.200.164.137: udp 68

  116: 23:46:10.580795 192.168.200.1 > 192.9.200.190: icmp: echo request

  COL-ASA-01 #.

  Any help or pointers greatly appreciated, I have do this config after a long interval on Cisco of the last time I was working it was all PIX so just need to expert eyes to let me know if I'm missing something.

  And yes I don't have a domestic network host to test against, all I have is a switch that cannot route and bridge default ip helps too...

  Hello

  The first thing you should do to avoid problems is to change the pool VPN to something else than the current LAN they are not really directly connected in the same network segment.

  You can try the following changes

  attributes global-tunnel-group RAVPN

  No address RAVPN pool

  no mask RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 ip local pool

  local pool RAVPN 192.168.201.1 - 192.168.201.254 255.255.255.0 IP mask

  attributes global-tunnel-group RAVPN

  address RAVPN pool

  no nat (it is, inside) static source NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 static destination NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24

  In the above you first delete the VPN "tunnel-group" Pool and then delete and re-create the VPN pool with another network and then insert the same "tunnel-group". NEX will remove the current configuration of the NAT.

  the object of the LAN network

  192.168.200.0 subnet 255.255.255.0

  network of the VPN-POOL object

  192.168.201.0 subnet 255.255.255.0

  NAT (inside, outside) 1 static source LAN LAN to static destination VPN-VPN-POOL

  NAT configurations above adds the correct NAT0 configuration for the VPN Pool has changed. It also inserts the NAT rule to the Summit before the dynamic PAT rule you currently have. He is also one of the problems with the configurations that it replaces your current NAT configurations.

  You have your dynamic PAT rule at the top of your NAT rules currently that is not a good idea. If you want to change to something else will not replace other NAT configurations in the future, you can make the following change.

  No source (indoor, outdoor) nat Dynamics one interface

  NAT source auto after (indoor, outdoor) dynamic one interface

  NOTICE! PAT dynamic configuration change above temporarily interrupt all connections for users on the local network as you reconfigure the dynamic State PAT. So if you make this change, make sure you that its ok to still cause little reduced in the current internal users connections

  Hope this helps

  Let me know if it works for you

  -Jouni

• ASA 5505 IPSEC VPN connected but cannot access the local network

  ASA: 8.2.5

  ASDM: 6.4.5

  LAN: 10.1.0.0/22

  Pool VPN: 172.16.10.0/24

  Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

  I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

  Here is my setup, wrong set up anything?

  ASA Version 8.2 (5)

  !

  hostname asatest

  domain XXX.com

  activate 8Fw1QFqthX2n4uD3 encrypted password

  g9NiG6oUPjkYrHNt encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.1.1.253 255.255.252.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  address IP XXX.XXX.XXX.XXX 255.255.255.240

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS server-group DefaultDNS

  domain vff.com

  vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

  access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

  pager lines 24

  Enable logging

  timestamp of the record

  logging trap warnings

  asdm of logging of information

  logging - the id of the device hostname

  host of logging inside the 10.1.1.230

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-server protocol nt AD

  AAA-server host 10.1.1.108 AD (inside)

  NT-auth-domain controller 10.1.1.108

  Enable http server

  http 10.1.0.0 255.255.252.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 10.1.0.0 255.255.252.0 inside

  SSH timeout 20

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntest strategy

  Group vpntest policy attributes

  value of 10.1.1.108 WINS server

  Server DNS 10.1.1.108 value

  Protocol-tunnel-VPN IPSec l2tp ipsec

  disable the password-storage

  disable the IP-comp

  Re-xauth disable

  disable the PFS

  IPSec-udp disable

  IPSec-udp-port 10000

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntest_splitTunnelAcl

  value by default-domain XXX.com

  disable the split-tunnel-all dns

  Dungeon-client-config backup servers

  the address value vpnpool pools

  admin WeiepwREwT66BhE9 encrypted privilege 15 password username

  username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

  the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

  tunnel-group vpntest type remote access

  tunnel-group vpntest General attributes

  address vpnpool pool

  authentication-server-group AD

  authentication-server-group (inside) AD

  Group Policy - by default-vpntest

  band-Kingdom

  vpntest group tunnel ipsec-attributes

  pre-shared-key BEKey123456

  NOCHECK Peer-id-validate

  !

  !

  privilege level 3 mode exec cmd command perfmon

  privilege level 3 mode exec cmd ping command

  mode privileged exec command cmd level 3

  logging of the privilege level 3 mode exec cmd commands

  privilege level 3 exec command failover mode cmd

  privilege level 3 mode exec command packet cmd - draw

  privilege show import at the level 5 exec mode command

  privilege level 5 see fashion exec running-config command

  order of privilege show level 3 exec mode reload

  privilege level 3 exec mode control fashion show

  privilege see the level 3 exec firewall command mode

  privilege see the level 3 exec mode command ASP.

  processor mode privileged exec command to see the level 3

  privilege command shell see the level 3 exec mode

  privilege show level 3 exec command clock mode

  privilege exec mode level 3 dns-hosts command show

  privilege see the level 3 exec command access-list mode

  logging of orders privilege see the level 3 exec mode

  privilege, level 3 see the exec command mode vlan

  privilege show level 3 exec command ip mode

  privilege, level 3 see fashion exec command ipv6

  privilege, level 3 see the exec command failover mode

  privilege, level 3 see fashion exec command asdm

  exec mode privilege see the level 3 command arp

  command routing privilege see the level 3 exec mode

  privilege, level 3 see fashion exec command ospf

  privilege, level 3 see the exec command in aaa-server mode

  AAA mode privileged exec command to see the level 3

  privilege, level 3 see fashion exec command eigrp

  privilege see the level 3 exec mode command crypto

  privilege, level 3 see fashion exec command vpn-sessiondb

  privilege level 3 exec mode command ssh show

  privilege, level 3 see fashion exec command dhcpd

  privilege, level 3 see the vpnclient command exec mode

  privilege, level 3 see fashion exec command vpn

  privilege level see the 3 blocks from exec mode command

  privilege, level 3 see fashion exec command wccp

  privilege see the level 3 exec command mode dynamic filters

  privilege, level 3 see the exec command in webvpn mode

  privilege control module see the level 3 exec mode

  privilege, level 3 see fashion exec command uauth

  privilege see the level 3 exec command compression mode

  level 3 for the show privilege mode configure the command interface

  level 3 for the show privilege mode set clock command

  level 3 for the show privilege mode configure the access-list command

  level 3 for the show privilege mode set up the registration of the order

  level 3 for the show privilege mode configure ip command

  level 3 for the show privilege mode configure command failover

  level 5 mode see the privilege set up command asdm

  level 3 for the show privilege mode configure arp command

  level 3 for the show privilege mode configure the command routing

  level 3 for the show privilege mode configure aaa-order server

  level mode 3 privilege see the command configure aaa

  level 3 for the show privilege mode configure command crypto

  level 3 for the show privilege mode configure ssh command

  level 3 for the show privilege mode configure command dhcpd

  level 5 mode see the privilege set privilege to command

  privilege level clear 3 mode exec command dns host

  logging of the privilege clear level 3 exec mode commands

  clear level 3 arp command mode privileged exec

  AAA-server of privilege clear level 3 exec mode command

  privilege clear level 3 exec mode command crypto

  privilege clear level 3 exec command mode dynamic filters

  level 3 for the privilege cmd mode configure command failover

  clear level 3 privilege mode set the logging of command

  privilege mode clear level 3 Configure arp command

  clear level 3 privilege mode configure command crypto

  clear level 3 privilege mode configure aaa-order server

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

  : end

  Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

  The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

  On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

• Customer Cisco PIX 501 VPN connects but no connection to the local network

  Hi all:

  I am able to make a VPN connection to a PIX 501. The remote client is assigned an IP (192.168.2.1) also, but not able to access all the machines in the local network connected to the PIX.

  I have attached the PIX configuration.

  Advice will be greatly appreciated.

  ********************

  6.3 (5) PIX version

  interface ethernet0 car

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  enable password xxxx

  passwd xxxxx

  pixfirewall hostname

  domain ciscopix.com

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

  access-list 102 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

  pager lines 24

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside dhcp setroute

  IP address inside 192.168.1.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool ippool 192.168.2.1 - 192.168.2.5

  location of PDM 192.168.2.0 255.255.255.0 outside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) - 0 102 access list

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  map mymap 10-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  ISAKMP allows outside

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup vpn3000 ippool address pool

  vpngroup vpn3000 Server dns 68.87.72.130

  vpngroup vpn3000-wins 192.168.1.100 Server

  vpngroup vpn3000 split tunnel 101

  vpngroup vpn3000 downtime 1800

  password vpngroup vpn3000 *.

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd address 192.168.1.2 - 192.168.1.33 inside

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd outside auto_config

  dhcpd allow inside

  Terminal width 80

  Cryptochecksum:xxxx

  ****************

  The DNS server is the one assigned to me by my ISP.

  My internal network connected to the PIX is 192.168.1.1 - 192.168.1.33 and the VPN ip pool is 192.168.2.1 - 192.168.2.5

  "isakmp nat-traversal 20" can do the trick.

• ASA 5505 VPN remote cannot access with my local network

  Hello guys, I have a problem with my asa 5505 remote VPN access to the local network, the VPn connection works well and connected, but the problem is that I can't reach my inside connection network of 192.168.30.x, here's my setup, please can you help me

  ASA Version 8.2 (1)

  !

  !

  interface Vlan1

  nameif inside

  security-level 100

  192.168.30.1 IP address 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 155.155.155.10 255.255.255.0

  !

  interface Vlan5

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  inside_nat0_outbound list of allowed ip extended access any 192.168.100.0 255.255.255.240

  pager lines 24

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool vpn-pool 192.168.100.1 - 192.168.100.10 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  Mull strategy of Group internal

  attributes of the Group mull strategy

  Protocol-tunnel-VPN IPSec

  username privilege 0 encrypted password eKJj9owsQwAIk6Cw xxx

  VPN-group-policy Mull

  type mull tunnel-group remote access

  tunnel-group mull General attributes

  address vpn-pool pool

  Group Policy - by default-mull

  Mull group tunnel ipsec-attributes

  pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  !

  global service-policy global_policy

  context of prompt hostname

  Yes, you will need to either configure split tunnel so that internet traffic goes out through your local Internet service provider, GOLD / directed by configuration current you are tunneling all traffic (internet traffic Inc.) to the ASA, then you will need to create NAT for internet traffic.

  To set up a tunnel from split:

  split-acl access-list allowed 192.168.30.0 255.255.255.0

  attributes of the Group mull strategy

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value split-acl

  I hope this helps.

• Addition of AirPort Extreme allows a Local network behave strange

  Hello

  At the moment is have this setup at home.

  DSL-> provider Modem/Router-> LAN-> airport of Time Capsule

  The airport Time Capsule is the generation model current 5th A1470 of running in mode Bridge with the router form my provider and implements a wireless network. It all works very well, but in my office working there WiFi coverage is a little low is a desire to grow with another airport.

  This is the configuration of the construction:

  DSL-provider of Modem/Router-> LAN-> airport of Time Capsule-> LAN-> Airport Extreme >

  Airport Extreme is the generation model 1408 5th also running in Bridge Mode and extend the wireless network. When I perform this configuration, the problems start. All devices bad connection to the internet, features are added several times on the network (also the Airport express are added some time because it appears with a (2) after East), in Airport utility, I get constantly disconnected status and it is very difficult to resolve, because I lose the connection even if I'm hard wired to the airport. I can also access devices that have a static IP address as the same router (192.168.1.1) or my home server. Thus, it seems that my local network is malfunctioning.

  When I unplug the Airport Extreme, everything works well again. I searched but not found this problem.

  Thanks for the help.

  Airport Extreme is the generation model 1408 5th also running in bridge and extend wireless networkMode.

  You can NOT extend wireless with the AE plugged into the TC.

  Your choice of plug in ethernet is good.

  Your wireless installation must be to create a wireless network... you can use the same name as the TC's wireless or different... It is totally up to you.

  What you did is due to a loop with the connection by both wireless and ethernet.

  If you want to use extend wireless... much slower option... then you disconnect the ethernet AE of the TC... If the connection is purely wireless.

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• Pavilion g7: stranger in my local network

  I have 2 PCs in my local network.

  The old one works in windows XP SP1, the new one under the home premium windows 7 (64-bit).

  Both are set in my local working group.

  At first, I could see each one of the other and use files and printer.

  Then, after what?, former continues to see its files and windows 7 but windows 7 sees nothing and I found no what to do to fix this. He is not in a homegroup because I don't know how to put my old PC in this group.

  Once, he started to work again, then permanently disappeared.

  Some body know what to do? It's very uncomfortable walk whith only a foot.

  (My windows 7 is the highest level of update before going to the Windows 10)

  Thanks for help

  Rosifonce wrote:
  

  I have 2 PCs in my local network.

  The old one works in windows XP SP1, the new one under the home premium windows 7 (64-bit).

  Both are set in my local working group.

  At first, I could see each one of the other and use files and printer.

  Then, after what?, former continues to see its files and windows 7 but windows 7 sees nothing and I found no what to do to fix this. He is not in a homegroup because I don't know how to put my old PC in this group.

  Once, he started to work again, then permanently disappeared.

  Some body know what to do? It's very uncomfortable walk whith only a foot.

  (My windows 7 is the highest level of update before going to the Windows 10)

  Thanks for help

  This problem is not a problem of HP, but a network problem, you need to access a Windows Forum site and ask for help on the networking or search online for configurations for your Windows network configuration.

• Satellite Pro A100 has "limited or no connectivity" & no connection to the local network

  Hello!

  I + really + hope someone might be able to help with this - been going slowly crazy.

  Bought my A100 18 months ago in Australia while I lived there and had no trouble to connect to LANs and others with my wireless. Everything was shipped over to me (here in London) last week and everything seems to have gone pear shaped. The House I live in has Wireless Broadband comes with our Sky Cable subscription, working on (I think - there is no real marking on the device) a router wireless Netgear A/G dual band (108 Mbps 802.11 b/g network). My laptop model is: SatellitePro A100 (part No.: PSAACE-007002EN) and it works on the following network hardware (drivers installed in brackets):

  1394 net adapter (5.1.2535.0)
  Intel(r) PRO/1000 PL Network Connection (9.2.24.0)
  Intel (R) PRO/Wireless 3945ABG Network Connection (10.1.0.13)

  I used the Sky Broadband installation disc to set up the network, but every time I try to connect it tells me that I have "Limited or no connectivity" and will not let me online. I've been on the phone for Technical Support of sky for hours, trying to get this sort, but when I plug in the Ethernet cable to the laptop it will not even get to communicate directly with the router (i.e. put the IP address of the router in explore and view the settings of the router). My 'Connectivity Doctor' shows there is a problem with my wireless connection (which the network has not assigned a network address of the computer), but no problem with my ethernet connection and yet neither will allow me to get online and every time that I try to repair the wireless connection I get an error message saying that Windows could not renew the IP address.

  I have disabled the Bluetooth, reset the router I don't know how many times and made sure that all cards have been activated and crosses without bad red and yellow exclaimation in Device Manager. All network devices seem to be "working properly" (according to the properties of the device).

  After days of weeding through the proverbial haystack of resources online while at work, I think that the problem is either something very simple (i.e. a setting random advanced configuration). I read somewhere as you will need to 'install' the router on the system, and that is not "plug and play" as Sky Broadband seems to have deduced by phone... but I would have thought the installation CD has done this, as when I discovered my connections (when the Ethernet cable is plugged in), it recognizes the connection (it won't only ++ anything). If there is no specific process I need to follow in order to properly install the Netgear router (for which I am currently trying to see if there are appropriate drivers, I need to download), I'd appreciate a lot of the age of enlightenment! It could also be a question that I need to reset the network key in the security settings of the router, as there are already three computers in the House connected to the network... but of course I can not do without first sorting on why my laptop can still communicate with the router via the Ethernet connection.

  Points to note:
  -My laptop runs on Windows XP Professional Version 2002 Service Pack 2
  -The disc to install Sky Broadband installed Internet Explorer 7. the last time I was online, I think that I was still using 6.

  If anyone could be of any use to solve this puzzle, you have earned yourself my eternal gratitude!

  -Danielle

  Hello

  I think that the solution should be simple;
  I presume that you TCP/IP settings are false. I mean that the settings should be set to automatically assign the IP address.

  Please check this box. Simply go to the network connections-> local network connections TCP/IP properties properties

  He put everything on automatic