Local to the external server
Cannot change language on phones as are registered in a CUCM virtualized with low disk space, impossible to install new parameters regional because Im weak space.
It is possible in other local installation? (actually a form try http://docwiki.cisco.com/wiki/Cucm-phone-locale-installers ).
No, you must install the file of the Conference of the PARTIES on the CUCM servers, you cannot install it on a server offline.
Tags: Cisco Support
Similar Questions
-
Just upgraded to 8 Captivate and for some reason my server any internal messages is no longer work on the web server. I can test locally the lesson that always points to the Web server and it works. Can't understand why when it is on the server it does not work. The ashx handler that manages to post is fully accessible to the web server and DNS solves very well so I can't understand why he doesn't hit the Manager. I use IIS to host it and a .ashx for managing for results.
Is there maybe something new that needs to be allowed in IIS for 8 Captivate work? .js seems to be fine and firewall is not the issue. Short of ideas and the need for this work as soon as possible.
Thank you very much for your help!
Nick
OK, finally solved. For some reason any run under HTTPS lesson could not publish my results. As soon as I changed to HTTP the results perfectly. All of this makes sense why I could post locally on the Web server. Hope this saves someone else 5 days of hell.
-
How to stop simultaneous programs to the external server
Hello
Oracle R12.1.3 application
We have a database server node, an internal server and an external server. Now, I want to stop the concurrent program to the external server.
I changed the variable s_concstatus to disabled and ran autoconfig. But still the current simultaneous program to the external server. A few times the program simultaneous log file is created in external rather than internal server server.
Please tell the procedure how to stop the program contributing to the external server.
Is order I need to run autoconfig between server to affect you.
Please notify.
Thank you
I tried to change the variable s_concstatus to disabled but no luck.
It is set correctly on the internal node?
What happens if you start the CM on the node internal then? What is the bahvior?
Thank you
Hussein
-
Problem with connecting to the external server
I am currently using my iMac with Mac OS X Lion 10.7.5 2011 (11G 63). I have an external server connected to the PC of the window. I tried many times and many ways and yet the error "There was a problem connecting to the server" continues to appear.
I checked:
-IP address
-No firewall
-Access rights
-Address external & directory serversI used my other new imac and macbook and they have no problem connecting.
Is this an error in version?
Please do help.
Read this article on the basis of knowledge of Apple, there may be something you've missed.
OS X El Capitan: connect to shared computers and servers for files on a network
Also this...
OS X El Capitan: to connect to a Windows from a Mac computer
-
Hard drives local to the host server, 10 k rpm or 15 k?
Looking at the addition of a couple of hosts "workaholic" into our environment vsphere for some SQL database applications. Is there an advantage to the esx server hosts on 15 k disks running over 10 k?
We use a mixture of San fibre channel/iscsi to all data warehouses, so this isn't for the vm comments just for the esx install.
Just curious to know what you guys are running, and if you see performance gains overall with faster disks to the host install.
Thank you
Kevin
If the disks are only for the accommodation of the operating system, there is not need to spend money for fast readers. You can even run the hypervisor of a patient USB or SD card.
André
Forum upgrade notice:
VMware will be upgrading systems VMware communities between December 10-12, 2010. During this time, the system will be placed in READ ONLY mode.
-
MSM760 welcome page on the external server configuration
Hi all
Please help us to understand and configure the following:
1. our MSM760 controller work with e-MSM430 APs in L3;
2. we configuration and monitoring of the various local networks for different clients.
3. in case of we need to provide some VSC welcome page is possible do not bring and put all the traffic in the controller? The problem is that if we do this the most. Speed DL/UL for the end user is less than 5 Mbps and w/o controller of more than 15 Mbps homepage.How to re-route traffic outside MSM760?
Thank you
Nikolai.
Nikolai,
You are in the forum of finished consumer products. You want to ask your question on to the Enterprise Business Community.
Click on the plus sign (+) next to the Forums of Discussion fall all server options, networking and any other problem of professional equipment.
Good luck.
-
where we get Networkid, Accepoint on the remote control, local to the tuxedo Server
Hi xu he
We had the Client Code written in c language, his work when sending messages from Tuxedo
He was earlier developed by others. Now we must develop with Jca adapter, for those who we need
Networkid and Accepoint of the remote and the local, please suggest me where I
Can get this information to the existing code, I got the Tuxedo of the remote computer Server Code and client code to the c language
\tuxedo (main folder)
-Ben
-include
-inventory
JRE-
-lib
-regional settings
-udataobj
-uninstaler
-registry.xml
-set.env
I need to use these DM_LOCAL_DOMAINS, DM_TDOMAIN, DM_REMOTE_DOMAINS, DM_LOCAL_SERVICES.
in the configuration of the jca adapter, where can I get this information to the code existed, please suggest me.
Thank you & & best regards
OlivierHi Olivier,.
You have described the structure of the directory is the Tuxedo installation directory. What you are looking for is the application directory where are the application configuration files. If the application has already been configured to use the gateway of the field, there will be a file containing configuration areas. If you have configured the environment application (TUXCONFIG, TUXDIR, DMCONFIG, variable of environment, etc.), you can use the dmunloadcf command to get a text representation of the areas configuration copy if you can't find the original source for it. Which will contain all the information of domain configuration you must configure the JCA adapter.
Kind regards
Todd little
Chief Architect of Oracle Tuxedo -
FireFox Sync is not an option, because the use of an external server is not allowed.
Use of third-party modules is not really an option.
Import/export is inefficient because it is not put them in the same exact place in every browser.I am happy to be able to use the same favorites/bookmarks file if it is an option.
Thank you
You do not have.
Sorry, IE and Firefox use different methods of storage Favorites / Bookmarks to data that are not compatible with the other program.
-
External HTTP >; internal to the web server
Hello
I have a router ADSL with a public IP assigned, preforming NAT. This leads to a 506th PIX which leads to a Web server. The entire interior of the ADSL is on private IP addresses.
I want to allow external users access to the Web server on port 80.
I inwardly and outwardly put up ICMP connectivity (for testing only) and it works correctly.
I created a virtual server on the ADSL router that forwards port 80 traffic to the external interface of the web server. It has worked successfully for half an hour and then something in the config changed PIX and it no longer works. Here is my config PIX
SH conf
: Saved
: Written by xxxxx at 08:41:10.001 NZST Thursday, October 13, 2005
6.3 (4) version PIX
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
enable the encrypted password xxxxxxxx
xxxxxxxxx encrypted passwd
hostname PIX
domain ciscopix.com
clock timezone GMT
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
icmp protocol error correction
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
no names
name 192.168.5.3 PixExt
name PixInt 192.168.6.1
name 192.168.5.1 ADSLInt
name 192.168.6.2 WebExt
acl1 list access permit icmp any any echo response
access-list acl1 allow icmp all once exceed
access-list icmp permitted acl1 everything all inaccessible
acl1 list access permit tcp any host 192.168.6.2 eq www
pager lines 22
opening of session
timestamp of the record
Record being buffered memory errors
logging trap notifications
ICMP allow all outside
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
external IP 192.168.5.3 255.255.255.0
IP address inside 192.168.6.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 192.168.6.2 255.255.255.255 inside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
NAT (inside) 0 192.168.6.0 255.255.255.0 0 0
Access-group acl1 in external interface
Route outside 0.0.0.0 0.0.0.0 192.168.5.1 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 192.168.6.2 255.255.255.255 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd lease 3600
dhcpd ping_timeout 750
xxxxx xxxxxxx privilege 15 encrypted password username
Terminal width 80
Cryptochecksum:xxxx
DMZInside (config) # route sh
outside 0.0.0.0 0.0.0.0 192.168.5.1 1 ANOTHER static
outside 192.168.5.0 255.255.255.0 192.168.5.3 1 static CONNECTION
inside 192.168.6.0 255.255.255.0 192.168.6.1 1 static CONNECTION
DMZInside (config) #.
No idea where I have gone wrong?
Thank you.
you are missing this statement
public static 192.168.6.2 (Interior, exterior) 192.168.6.2
Thank you
Nadeem
-
Presentation of external storage as Local to the SQL virtual servers
Hello.
Obligatory "I'm new" and 'sorry if this is in the wrong place' withdrawals.
I have two SQL Server virtual machines (running on ESX 3.5) which I am (at the level of the BONE) clustering for redundancy. All their storage would come from two HP AiO servers storage or local storage of the ESX Server. For now, we don't have VirtualCenter.
I need to present some sort of external storage for these virtual machines that they can (a) recognize as local so I can store files .mdf for SQL server on it, and (b) which can be configured as a cluster resource, so either can be accessed in the event of another machine down.
I tried to create a new virtual hard disk, pointing to the raw space on some of my existing storage, but "raw device mapping" is greyed out. I guess it's because he needs a real San for gross external storage as a virtual disk local card. I also tried new creation and extensions adding storage to the storage devices in the configuration of ESX storage. There's no joy.
Should I VirtualCentre or a real SAN in order to present the raw disk space to a virtual machine? If this is not the case, how can I do? If so, which do I need and is there some kind of fudge or skilled people getaround may suggest that fits my needs of clustered SQL Server resources?
Thank you.
Rikk
Hello
Welcome to the forums! I have a few questions and comments.
To use a RDM in normal mode you will need a SAN/NAS/iSCSI server to get there. Since the storage of the IOA is an iSCSI SAN or a NAS you want present storage to ESX using one of these methods. I guess that you already do using iSCSI or NFS? You are using.
I would not use Local Storage due to problems of redundancy.
You have space on your AiO storage to create another logical unit number?
A RDM is a logic unit number presented to the ESX host as a data bank that is not also a VMFS. Once the logic unit number is presented for ESX you can do a RDM or you can do a VMFS and add another VMDK to your VM and move the .mdf for the new VMDK files. Or the other method should work. You can also access the server iSCSI directly from Windows and directly access a LUN to one end.
You have many options at this point. Which way you want to go?
Best regards
Edward L. Haletky
VMware communities user moderator
====
Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»
SearchVMware Blog: http://itknowledgeexchange.techtarget.com/virtualization-pro/
Articles of blue Gears - http://www.itworld.com/ and http://www.networkworld.com/community/haletky
As well as virtualization at http://www.astroarch.com/wiki/index.php/Virtualization Wiki
-
Local language wrong in the production server.
I have an app with a few projects with all two locale - Faroese and English. When I run the application on the application by default server on my local machine, it works fine with the locale Faroese, but when I deploy on our production server and try to run it from there the Faroese local doesn´t works more for one of the projects.
For this project the values that are bound to properties files in my viewcontroller are indicated in Faroese as it should, when the application is run from the production server, but the values that are related to the entity objects and display the properties of the objects files do not work as they should more. English values instead of the Faroe Islands so the English files property are met, but the server does not be able to understand that the Faroes properties existing files or for some reason some prefer the local English for this project so that it can figure out to see other projects in Faroese, so I guess that the error is somewhere in my model project given that the locale Faroese works for my other projects on the production server, but I can´t find out where.
So now I hope that someone here has experienced something like and can tell me what I need to do to correct this.Hello
I think you've hit a problem with case name of the resource bundle files (* .properties).
Even windows file system is not case sensitive that your file names MUST be exactly like the bundle Resource Manager is seeking.
This works also on embedded because the resource bundle files are located directly on the file system.
When you deploy the EAR/WAR files externally as files are found by the jar/zip finder which is case-sensitive!for example: bundlefile_EN.properies is not the same thing as bundlefile_en.properies
I hope this helps.
concerning
Peter -
Problem:
My local disk is full (even with compacting emails).Condition:
I use the IMAP protocol and have a lot of emails. I want all emails to stay on the IMAP server.Possible solution (that I couldn't know how):
Only show the emails in Thunderbird.My experience:
Parameter to 'retrieve only messages last 30 days' doesn't change anything (no doubt because the messages are already on the drive).
Unsubscribe and re - subscribe folders doesn't change anything.Any suggestions?
Yes, I just tried it with a one-time account and, it seems, everything is OK. Messages remain on the server, but there are only a few KB, taken on the local HARD disk.
-
Hi forum,
for a long time, I tried to set up a filter which copies new messages in the Gmail inbox to a folder in local mail in Thunderbird, and defines in addition/unread state correctly on both ends.
However, no matter what I try, it doesn't work.
There seems to be no way to set the playback on the IMAP server to 'read' State after the copy action and at the same time keep the "unread" status for mails that have been copied to the local folder in Thunderbird.
It does not work even if I created an intermediate folder on the IMAP server where mail is first moved to and only then is copied to the local Thunderbird folder later.
I also tried all sorts of combinations with the 'move later' and other actions to FiltaQuilla.
I'm really at a loss. I'm the only one who wants to copy the message from Gmail to a local Thunderbird folder and get the status of unread / read appropriate on the server, as well as in Thunderbird?
Bunch help, thank you
Bravo David.P
Why is that every time I ask about any TB support forum, I find myself explaining things instead of getting an answer?
I need to mail to stay on the server, even if I delete it locally. What part of this is not understandable?
In any case, don't bother. I fixed it myself at the same time by putting in place the new Gmail account in Thunderbird.
See also:
http://forums.mozillazine.org/viewtopic.php?f=31 & t = 2877149 -
How to move all e-mails from the imap server to local folders automatically for each mail?
Hello
I want to transfer all my e-mails in local folders as soon as they arrive in Thunderbird and remove them from the server. I can do this manually by moving the mails to hand, but I want to do it automatically by Thunderbird.
After a few hours, I found there is an option on the removal of e-mails from the mail server, if I use POP3, but it is not an option for IMAP.
Important note: my mail can not be resolved like POP3, so please don't segguest implementation using POP3.
Thanks in advance.
-
Authenticate on the Member Server external windowsdb
I would like to know if someone was able to get the version of camera ACS to authenticate users on a Windows Member Server not a domain controller (no advertising).
My bad, sorry.
When you use the device, you must use the Remote Agent for Windows, the device then speak this agent to authenticate the users in its database SAM or AD. You need this because the unit does not in any domain, so it must pass the usernames/passwords on a Windows Server that can authenticate users.
You can read about it here:
http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacsapp/Raig/Rawi.htm
Basically install it on the Member Server, and you should be good to go, it will automatically use the local SAM database to check names of user and password. It is actually easier to set up if you try to authenticate to a domain, since there is really nothing to install other than the agent for you.
Maybe you are looking for
-
I have a cb desktop p7-1257. It comes with two dvi ports and I have two connected displays. I want to add another card bi-ecrans but need to know if he'll kill two dvi ports which I use now. The point is to have three monitors and my TV hdmi just fun
-
Toshiba 40L1333B - pop up message: "Eve cause no signal.
Hello I have this message pop up on my screen when I turn on the TV-> "Eve cause no signal.Can anyone tell me wat it means and how to get rid of it please Thank you very much
-
When trying to play big fish games I get a message box drmactivator does not
drmactivator does not can not play big fish games
-
I didn't have a problem until 2 days ago... I downloaded some new realplayer (flash) video files, but one of them seems to be a MPEG-4 file (.. all the files in my video file realplayer are flash videos)... this curious MPEG-4 file will not be delete
-
Windows 7 turns the display off, but doesn't go to sleep
My Windows 7 will not more in mode 'sleep'. It will turn the display at 5 minutes (by the Power Options settings), but it won't put the computer to sleep after 30 minutes. The screen is off, but the hard drive flashes. The power light on the compu