Location of SPDIF port

Similar Questions

• Dell Precision T3500 and SPDIF Port

  Hello

  I'm in the market for a new computer because my old HP died and I really like the Dell Precision T3500. I would like to put one of my old graphics card in the new Precision T3500, a Nvidia Geforce 8500 GT because it has a HDMI port on it and I want to drive my television station. However, have sound out of the HDMI on the Geforce port, you must connect an SPDIF cable on the Geforce to the SPDIF port on the motherboard. Is my question, there a SPDIF port somewhere on the motherboard in a Precision T3500? I looked but I have never seen a list of anywhere. Thank you very much for the help!

  Chris

  Hi Chris,

  Thanks for looking in the Precision T3500 computer next and we hope that you don't end up buying one!

  That said, I must not be the bearer of some bad news that this system is not equipped with an SPDIF port on the motherboard. A possible solution would be to buy a sound card has a SPDIF connection and then connect the graphics card to that. Of course, it would take one of your PCI/PCI-Express slots.

  I hope that answers your questions - if there is anything else, please let me know!

• Do not allow any spdif port

  HY, my problem with the Realtek HD Audio Manager is that: I can't find "yellow file" icon on the audio Manager realtek hd, I can't have the posibility to get the coaxial spdif jack signal, the spdif cable is not detected, I did update from realtek to the version 2.71.Something new official site happened during the instalation I think , because in the parameters of the tab Manager is apear in low to the left rather realtek logo asus logo. I have an ASUS P5LD2-X/1333 MB, I using Windows 7 Home Premium SP1, façade is HD audio, front and the input jack rear panel is detected. All work fine just spdif is the problem. I hope you can help me and thank you in advance. If someone can show me how to enable the registry key spdif port, I would be grateful.

  Hello

  According to the Features of Asusmotherboard has a S/PDIF output on the rear panel. And reading your description of the issue, it seems to be a problem in the way that you configured the audio driver in the computer rather than a registry problem. Probably the most recent driver that you have downloaded is not configured correctly.

  So that you know the correct configuration of your sound driver, at this stage, it will be best to contact the manufacturer of your motherboard support team. They will be able to tell you how you can configure your pilot program to make the output S/PDIF port work for you. I provided the Asus Support link below, please use it to get in touch with them in order to unravel the audio configurations:

  http://www.ASUS.com/support/

  I hope that this information helps you to get appropriate help for this issue at the earliest. Let us know if you still have problems with Windows, we are happy to be of assistance.

• Where are located the USB ports?

  I think to buy the G60-216EM, but I was just wondering where the USB ports are located, because there is no 360 degree view of the laptop.

  Thank you

  There are 2 USB ports on the right side of the laptop and 1 USB port on the left side.

  I hope this helps.

  Pete

  BTW...

  At the top of this page, you will find a search. Enter the number of the model of the computer and press to enter. This will take you to the support page where you can download the manuals for the laptop you want. You can read and get a pretty good handle on where everything is.

  Have fun.

• High speed USB 2.0 physical location of the port

  I have a HP Pavilion dv6-3122us Notebook PC. I get messages when the transfer of files on the fastest "high speed USB 2.0 port.  My user manual tells me that I have three ports, of which one is a 2.0 port but I am unable to say which is the 2.0 port. Can anyone help me find information on the location and identification of the usb ports?

  James Worthen Sr

  I just got offline with a HP tech rep and he told me that the high-speed 2.0 port was, in fact, the eSATA/USB port.

  With this port, it gives me four ports and I wouldn't imagine that it was even a USB port, as it seems slightly different rather than the usual USB ports. I pluged my Bluetooth adapter in this port and it works fine. I have not tried to transfer files with this port again, except the photos with the bluetooth, but when I do I will seek to see if I still get the same message while transferring. I doubt I would. I believe that this issue has been resolved and I will mark it as my. Thanks to all who responded.

• Stereo Mix does not exist? and SPDIF port does not exist?

  Well, as shown in the topic, I have two major questions. On the one hand, on all my computers forever, I had a stereo mix on this subject. (An Inspiron 1721) does not, there just the pickups on the lid and the entry on the site. Where the hell is the mix stereo/mono and other devices which are USUALLY there on the other compuers (including my old Dell Inspiron 6000). In addition, my computer claims to have a port of SPDIF output on it, and turned on, but... I don't see one ANYWHERE on the body of this computer and it's terribly confusing. Any help is appreciated... Thank you

  ~ Justin Harper

  System: Dell Inspiron 1721, 3 GB RAM, SigamaTel integrated audio, AMD Athlon 64 x 2; OS: Microsoft WIndows Vista Home Premium. Anything else you need, ask.

  
  

• Locate the USB port improved on my laptop

  Please help me find the fast USB port on my laptop.

  In the Device Manager on my laptop HP HP G60-100 series, it confirms that I have an enhanced USB port.  Can someone please tell me which of the three ports is the fast USB port?  I have to save a lot of information from my phone & it takes too much time.  Difficult to test each port as I am in the middle of a long transfer.

  It is not in the product manual, ports are listed as USB ports.

  Thank you!!

  Linxon wrote:
  

  Please help me find the fast USB port on my laptop.

  In the Device Manager on my laptop HP HP G60-100 series, it confirms that I have an enhanced USB port.  Can someone please tell me which of the three ports is the fast USB port?  I have to save a lot of information from my phone & it takes too much time.  Difficult to test each port as I am in the middle of a long transfer.

  It is not in the product manual, ports are listed as USB ports.

  Thank you!!

  Hello

  I think that the enhanced USB port is that which is directly soldered to the motherboard and, most likely, on the left side of the laptop where the ports HDMI, VGA or eSATA. The other side ports are connected to the motherboard by a cable and probably use another USB controller.

  http://en.Wikipedia.org/wiki/Host_controller_interface_%28USB, _Firewire 29 %#Enhanced_Host_Controller_Interface

• Location of HDMI port on a Touchsmart 600 computer

  A cable company technician told one day we buy an HDMI cable to connect the PC and the receiver. See the HDMI port on the cable box, I do not see such a port on the PC. Does anyone know if an HDMI port exists on the Touchsmart 600 and if so, how do I access the port? Thank you.

  Hello

  No, it does not have HDMI port:

  Source: HP TouchSmart Desktop PC product specifications 600-1350

  Many later models have HDMI ports, but they are IN ports.

  Kind regards.

• 15 - ay013nr: how to tell which USB 3.0 port when they are not blue?

  How am I supposed to say which USB port is my port 3.0? I thought they were supposed to be blue?

  Laptop model # 15 - ay013nr

  Thank you

  Hello:

  See Chapter 2, page 6 of the laptop user's guide for the location of the port usb3.

  http://h10032.www1.HP.com/CTG/manual/c05114176

• Satellite Pro L300-165 - SPDIF can be activated?

  Got to start laptop. The A300 series has SPDIF via the headphone jack. Two models (A300 and L300) must use the same sound chipset, I think.
  But Realtek settings have no SPDIF parameter at all.
  Is it possible to activate SPDIF on my laptop? Or it is disabled by the physical layer?

  I believe that the SPDIF port is not included in this model, so the SPDIF feature is disabled.

  The brochure says that it has a headphone jack.

• Re: Satellite P300-135: No. SPDIF in 'His' Panel after the installation of SP1

  Before this one had speakers, HDMI and SPDIF.
  Now - only speakers and HDMI.

  After all the works of S/PDIF through speakers device, but only in stereo mode.
  I need 5.1 DD!

  Could be another reason for that?

  Hello

  The SPDIF port is certainly available on this laptop.
  I remember that some devices can be hidden, if they are not enabled.

  So maybe you can do a right click in the Panel-> Sound and could mark called options hidden devices and features see the disabled.

  Then the SPDIF should reappear.

  Check it!

• Get information about the physical location (serial) Visa (slot) in PXI time real (Pharlab)

  Hello

  I PXI system with controller time real (OS Pharlab) and many maps series (about 6 cards).

  The maps in the series are two different models, which each contain several (8431/8 and 8421/8) serial ports.

  And the COM Port enumeration mix and I would like to know the link between COM numbering where it is linked.

  I have already dealt with a few methods:

  1. I've tried using the node property of Visa but he cannot know which card port COM belong

  2. I tried to use the Configuration Library system and don't manage to get general information of the card and not what ports have this card.

  3 try to fill you with the VisaConf.ini, but discovers that ASRL and COM Auto-enumeration is the same.

  4. I tried to look in NISerial.ini, NISerial.dbs and NOR - RT.ini and did not find any help here.

  Application engineer or support suggest to look in the registry of the operating system Pharlab because it is windows based and material information must be stored in the registry

  Further explanation on the problem of PXI enumeration:

  PXI produce enumeration auto for the ports series (COM3, COM4, COM5...) according to the card slot, but when there is a mix of the two models of the system would then list a model (8431) from 3 to 50 (6 cards and 8 ports) and the other model (8421) 51 to 98. so if I have 8421 in 2 and 8431 slot number in the slot number 3 it would list 2nd slot COM59 to COM68 and 3rd slot COM11 to COM19.

  Why not just use NOR-MAX to manually configure the ports?

  The system is essential and can not be stopped for a long time and he operated by people who are not very technical, so the customer who wishes to be able to exchange business cards without futher configuration.

  Thank you

  Or Hirschfeld

  Application engineer

  SK-Electronika, Israel

  www.LinkedIn.com/in/orhirshfeld

  Solved and download the example of solution of community

  Get the location COM (Serial Port) and Port physical location in the chassis

• SG500 showing the same MAC address on more than one port?

  My ISP has been help me solve a problem that we had with an interaction between our SG500 battery on HP customer premises equipment.

  I have the stack of SG500 divided into two VIRTUAL LANs. 8-port VLAN11 and the rest on VLAN1. Both are of VLAN native, not marked so they will carry only the traffic for their own VLAN with no mixing. I also route between these VLANs on the stack.

  VLAN11 switch ip: 10.76.20.20

  IP switch VLAN1: 10.1.1.1

  I took a port for each VLAN and plugged into the HP PSI switch, where he adapt VLANS separated which then connect to a remote data center through an MPLS.

  Here's the question: the SG500 seems to have mac address base on two HP PSI switch ports. This disrupts the HP switch, and I end up having packets to fall into a black hole. This is the output of the switch from HP showing mac based battery SG500 goods between ports in seconds:

  HP # display the address mac 8843e1-af7085

  Status and counters - Address-Table - 8843e1-af7085

  MAC address: 8843e1-af7085

  Located on the Port: 15

  HP # display the address mac 8843e1-af7085

  Status and counters - Address-Table - 8843e1-af7085

  MAC address: 8843e1-af7085
  Located on the Port: 11

  Any idea what's going on here? It's as if the SG500 uses the MAC even for both its IP addresses.

  Thank you!

  Hi Dani, the only MAC address announced by SX300/500 series should be the Mac system if you show on the SX500 mac address table, you should see the MAC even for both VLAN. I don't know why, is to confuse the HP switch unless it does not correctly between switches vlan tag.

  -Tom
  Please mark replied messages useful

• Errors of run Switchport Port-Security

  So I'm a bit new to switchport security.  I work on most of the ports in one location.  Its ports where I either switchport voice and switchport access VLAN or just switchport voice VLAN.  For some reason, these types of ports going into err - disable.  Here are a few examples.  Indications as to why it would stop even when I have the right MAC address would be very useful. Interface Fa0/3 has a phone attached to it and a connected computer the phone is off.

  interface FastEthernet0/2
  Description Table phone
  switchport mode access
  switchport voice vlan 2
  switchport port-security
  security violation restrict port switchport
  switchport port-security-address mac 34a8.4ea6.0f95
  spanning tree portfast

  interface FastEthernet0/3
  SAM PHONE x 1623 description
  switchport access vlan 3
  switchport mode access
  switchport voice vlan 2
  switchport port-security maximum 2
  switchport port-security-address mac 442b.031a.2975 - phone MAC
  switchport port-security-address mac e840.f223.8842 - MAC computer
  spanning tree portfast

  2 442b.031a.2975 DYNAMICS Fa0/3

  2 34a8.4ea6.0f95 DYNAMICS Fa0/2

  The newspaper says this whenever I turn on port security.  Any other port where there is only 1 VLAN or 1 device, it works fine no problem.

  27 June 2015 23:59:56: % PORT_SECURITY-2-PSECURE_VIOLATION: security breach took place, caused by MAC address 34a8.4ea6.0f95 on port FastEthernet0/2.
  June 28, 2015 00:00:01: PM-4-ERR_DISABLE %: psecure-violation error found on Fa0/3, putting the Fa0/3 in State of err - disable
  June 28, 2015 00:00:02: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state down
  June 28, 2015 00:00:03: % LINK-3-UPDOWN: Interface FastEthernet0/3, changed State to down
  June 28, 2015 00:00:04: PORT_SECURITY-2-PSECURE_VIOLATION %: security breach took place, caused by MAC address 34a8.4ea6.0f95 on port FastEthernet0/2.

  I know I'm missing something because I am new to using switchport security.  I am wanting to lock the ports to prevent devices not allowed to plug in on my network.  I have disabled all DHCP, but I want to take a little further and prevent them to enter the network even and probe the network.

  EDIT - You forgot to mention that it is a 2960 version 15.0 (2) SE5

  Thank you

  David

  David, Kevin,

  Let me join you.

  The way I see the Fa0/2 work with its original configuration is:

  • The maximum number of secure MAC addresses is 1.
  • Access to the VIRTUAL LAN is 1, the voice VLAN is 2.
  • The static safe MAC address 34a8.4ea6.0f95 is added to the access VLAN, not to the voice VLAN
  • When the phone starts to make known by the voice VLAN, MAC address cannot be dynamically added to the list because the maximum allowed number of MAC secure is 1 and the list is already full. The fact that its MAC address is configured statically is irrelevant, because it is not associated with the voice VLAN.

  Try to delete the line

  switchport port-security-address mac 34a8.4ea6.0f95

  and replace with

  voice of vlan switchport port-security-address mac 34a8.4ea6.0f95

  and see if it solves the problem.

  Best regards
  Peter

• change of access port blocking another port

  Hello

  This is my first post here. I recently branch for a laboratory at home switch a sg300-10. I enabled couche3 routing on it and have encountered a strange problem. The switch is the default gw on this network, and in front of the switch, it is a cable modem)

  IP route 0.0.0.0 0.0.0.0 192.168.0.7).

  This is my config:

  config-file-header

  switch5ed948

  v1.2.7.76 / R750_NIK_1_2_584_002

  CLI v1.0

  SSD of encrypted file indicator

  @

  SSD-control-start

  config of SSD

  control of password file unrestricted SSD

  no control of the integrity of the file ssd

  SSD-control-end cb0a3fdb1f3a1af4e4430033719968c0

  !

  database of VLAN

  VLAN 10

  output

  Add a voice vlan Yes-table 0001e3 Siemens_AG_phone___

  Add a voice vlan Yes-table 00036 b Cisco_phone___

  Add a voice vlan Yes-table 00096e Avaya___

  Add a voice vlan Yes-table 000fe2 H3C_Aolynk___

  Add a voice vlan Yes-table 0060 b 9 Philips_and_NEC_AG_phone

  Add a voice vlan Yes-table 00d01e Pingtel_phone___

  VLAN voice Yes-table add Polycom/Veritel_phone___ 00e075

  Add a voice vlan Yes-table 00e0bb 3Com_phone___

  IP address of 192.168.0.120 dhcp relay

  activate a dhcp IP Relay

  Info IP dhcp option

  No Hello activation

  hostname switch5ed948

  No complexity of passwords allow

  ID password cisco

  Server SNMP Server

  clock timezone "" 1

  summer time clock web recurring EU

  unicast SNTP client enable

  unicast SNTP client survey

  192.168.0.120 SNTP server

  The telnet server IP

  !

  interface vlan 1

  no ip address dhcp

  activate a dhcp IP Relay

  !

  interface vlan 10

  name of LOM

  IP address 192.168.10.254 255.255.255.0

  activate a dhcp IP Relay

  !

  interface gigabitethernet7

  switchport mode access

  !

  interface gigabitethernet8

  switchport mode access

  switchport access vlan 10

  !

  IP route 0.0.0.0 0.0.0.0 192.168.0.7

  Pretty simple. About gi7 gi8 I want to configure 2 interfaces (lights out management) of LOM 2 devices in vlan 10.

  When I enable the vlan 10 on gi7, I lose network connectivity to devices behind IG5 which is a trunk port vlan 1. Very strange

  So, I just want to use 2 ports such as access on a non-standard VLAN ports. These ports should not be ports trunk/general, simple access to the ports.

  What I'm doing wrong here?

  TIA,

  Natxo

  Natxo, that's how it takes work.

  interface vlan 1

  IP 192.168.0.254 255.255.255.0

  interface vlan 10

  IP address 192.168.10.254 255.255.255.0

  --------------------------

  Host A is located in a port which is a member of the vlan 1. A NIC host configuration should be--

  IP 192.168.0.x

  Mask 255.255.255.0

  Gateway 192.168.0.254

  Host B is located in a port which is a member of the vlan 10. B NIC host configuration should be--

  192.168.10.x intellectual property

  Mask 255.255.255.0

  Gateway 192.168.10.254

  ----------------------------

  Now, if the host A and B are both capable to respond to ICMP, while there should be no problem to ping any direction. Also, make sure that if either of these computers have access to turn off wireless.

  -Tom
  Please mark replied messages useful