Locked due to changed past

Similar Questions

• Lock screen has changed

  This isn't a huge problem, and I don't know if it was an update or if I changed it in the settings or if someone else has that

  the lock screen used to look like "droid lock 1" and now it looks like «droid lock 2 "»

  Sorry for bad quality on the 2nd picture... If u can't see it, the first lock is like a bow. The second lock is straight

  The lock screen has changed when the OTA is out the month last around 11. But it seems that you have added a different wallpaper.

• User account is locked and says change password

  My wife has Vista on a Dell computer.  When she went to use his username happen but the password does not work.  Gave him a tip and then said to reset password.  When she tried, said she needed a disc which it doesn't have.  Everything is locked.  She can't do anything but the screeen of the user account and the guide to help change password and she has no disc.  Please help us.  Thank you.

  mohdrafi,

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And stop copy and paste other peoples work in these Forums!

  You copied and pasted above of my posts, my answer is different from Microsoft and I use "quotes".

  «Microsoft support engineers cannot help you recover passwords of the files and functionality of Microsoft who are lost or forgotten products.»

  Above is what he says to the Microsoft link. That's how I know you have copied and pasted what I post, which is below to:

  'http://support.microsoft.com/default.aspx/kb/189126 '.

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. »

  You do this with a lot of your answers and with other regular posters work in your answers on these Forums.

  Write your OWN answers.

  Mick Murphy - Microsoft partner

• my phone has been locked due to activation lock please help me

  Phone has been locked for some time due to the blocking of the activation. I get my password and I typed it in. it did not work.

  What is going on?

• Thus children pass lock code cannot change it on iOS

  I have iOS devices where I can turn on the restrictions. Other people can use the device. I need to lock the access code, so it cannot be changed by "child".

  Device is iClouded and restrictions are enabled for a few things. Don't see anything about locking access code.

  I don't know exactly what you mean by "the lock access code", but you might want to take a look at this - to use a password with your iPhone, iPad or iPod touch - Apple Support

• IMac locked out after changing the sharing and HD permissions

  Made a big mistake with my iMac internal sharing and permissions of HD.   I was experimenting with sharing and permissions of the HD info panel section in the administrator account.    In this article, I've changed the 'everyone' naming 'no access', but in doing so, it froze the machine.  Nothing did not.  I tried to restart, but after that the Apple logo and progress bar appears briefly, the screen went white.

  I tried to make a backup using Time Machine, but when the time came to clear the HD and replace it with the backup TM, I got an error message saying that the system could not erase the HD.  I tried to go into Safe Mode, but he continues to send me the recovery mode.

  I have a boot disc separate I made in Carbon Copy Cloner who is somewhere else right now but I can get, and maybe I can boot from that and do a total deletion of the internal HD and start again.  But I can do in the meantime?  It seems that a configuration option has locked me completely out of the HD to the iMac.

  Thank you

  Ed

  To keep track, I tried something different. I used the option to reinstall OS X when the pane of the utility is on the rise.  My iMac then crossed the download process and reinstall OS X.  After 40 minutes, when he was all done, my machine is back with the connection, settings, and data in place.  I didn't even do a time Machine reinstall data.  Problem fixed.

  Moral of the story is, don't play with fixed and permission of a lot!

• Application Due Date changing

  Hello
  
  I tried to execute a plan of small unconstrianed with one that to one item and two items with the underside of LT
  
  Agenda: do
  Treatment: 1 day
  Fixed: 0
  Variable: 0.333
  
  Article: Buy1
  LT: 5 days
  
  Article: Buy2
  LT: 6 days
  
  BOM and routing defined.
  Now, I've placed a request through forecasts (bucket in days) and the SDM as below
  Forecasts-> From: July 2, 2012 at: July 5, 2012 current QTY: 100
  
  Copied on the SDM as
  Qty 2 jul 2012-100
  July 3, 2012 - Qty 100
  July 4, 2012 - Qty 100
  July 5, 2012 - Qty 100
  
  A triggered the collection plan, then the plan. I have some doubts as beolw
  
  (1) after the collective management plan, when I interviewed the item (in the data) and he saw through the offer and request-> entry scheduled for July 2, 2012 with Qty 100 has been viewable.rest is not available. Why is it so? But all the entries in the SDM was 2/jul to 5/Jul veiwable...
  
  (2) after the running of CAWC plan attach the MDS to plan, when I questioned the item (in the planner workbench) and he saw through supply and demand-> ask the suggested due date of all demand has been changed to 7 Jul. As a diet without constraint, I was wondering why CAWC pushes the expiration date.
  
  (3) in the Planner workbench where you can view the start date suggested a PR or DJ. My date of implementation is still showing the suggested due date of the application. I need when the PR or DJ should released I mean suggested departure date.
  
  (4) what is meant by transitional and non-transitional safety stock and what is the profile option to fight against it.
  
  (5) if I'm dividing the planned order for the safety stock, then how will be done by CPSA pegging...
  
  Kindly help me in healing them. I am struck with these questions.
  
  With respect,
  M.Raamjee

  (1) the registration of forecast would have a data point which says it's for 5 days. So it's ok.

  (2) check your bucket of forecast. There's a weekly forecast. Try to do it every day.

  (3) the due date is then the material should be ready. CPSA will calculate the start date appropriate depending on the type of point and lead. enlarge the elements, for example, it will backtrack sometimes MFG. and create a job wip with correct start date. For purchased items, it will calculate the appropriate dock date (i.e. need by date on PO) based on the lead-time of post-processing. You can see some of these dates using the record feature.

  (4) transitional is basically expected MRP safety stock. Non-transitoire, it's putting you in the inventory module.

  Sandeep Gandhi

• I'm visually impaired, and due to changes in UI v29, I see is no longer the menu bar where it is hidden in the title bar. How can I move it back to where it belongs?

  I have two computers at home and their improved to 29 of Firefox not knowing it contained UI heavy Exchange. I use the menu, bar and it is now superimposed on the title bar, where due to a visual disability, I can no longer see. Both systems have contrasting colors lit (white on a black background - forget Aero and trick themes), and Firefox is configured to use the system colors.

  Prior to version 29, the menu bar has white text on a black background. now it's on a background of colorful and almost completely invisible to me. The expansion is via the Windows Magnifier and Magnifier added to some Microsoft mouse top of range.

  As you can see on a brand new Virgin of installation of Firefox, no addons, no pre-existing profile, version 29 puts the menu bar on the taskbar. And Firefox, set up as I have, on a configured system with contrasting colors (black in my case) enabled, Firefox is unthemeable.

  But no matter, I Solver this myself. I started in XP and not update Firefox to find a new addon named "Classic theme restaurant" Who did the trick. This mark as resolved. But...

  I wish (not just Firefox) developers who want to fancy to the top of their interfaces would think how it would affect people with visual impairments. We use computers too.

• Phone locked after battery change

  Hello world

  I replaced my battery on my 3 g phone and now everything is gone and I get a connect to the iTunes message? Help, please

  Thanks in advance

  Looks like you screwed up when you changed the battery.

  Now that you've opened the iPhone that apple will have nothing to do with it once again.

• Locked out of my iPad on lock due to restrictions of the child screen

  When we use FaceTime we always allow child restraint (disabling screen etc) for our child can also facetime with family, preventing to end the call.

  We just got a call, answered he, restrictions enabled by clicking the home button 3 times.

  the call is completed on the other side, the iPad has jumped into the lockscreen.

  But the restrictions of the child are still on. Outside of the FaceTime app.

  but the lockscreen does not allow me to push the code to turn off the child lock.

  So now I'm locked out of the iPad. all buttons and off screen.

  Anyone an idea how to get back?

  Resolved now power + home until you restart.

  After the reboot, the lock is disabled.

• [6 beeps] Due to change of video mode from Legacy to EFI

  Hello

  I changed the video mode of the bequest to EFI by accident, now F10 does not work, and there are still 6 beeps.

  So, what I can do since no singal video and F10 works.

  Thank you

  NET

  Hello:

  Go to the taking in charge of your PC and driver page, look at the link card motherboard and follow the instructions to clear the CMOS.

  Which will reset the BIOS to its default values.

• Windows 7: games online lag & defective live tv unstable/record live tv playback (due to changes in priorities/Planner win7?)

  Since installing Windows 7 ultimate, I have 2 problems (compared to XP or even Vista):

  (1) online gaming is lag; the other players seem to move like ghosts, somehow jerky and jerky, but my ping is completely normal (low) and fps are good, too.

  (2) direct TV experience is worse now:
  When I watch a dvb - t transmission and switch to another app that I have at the same time (like total Commander, instant messaging, Notepad, etc.) I hear audio clicks and get video abandonment. The same is true when I'm not watching a transmission, but when I save it. The recordings are defective (video and audio dropouts).

  However, existing good records can be read without any problem, even when you switch like crazy between all sorts of substantive programmes and lots of tabs in my web browser. With these good records I get no problem whatsoever (for example: files in windows XP). It is only when I try to record something in Windows 7 that I get these questions.

  I have used many different programs (from dvbviewer for progdvb for dvb dream to Windows Media Center). The problem is always the same.

  This did not happen in XP, however.
  Under XP, I can switch to background programs and switch between tabs in the opera 100 without being any 'clicks' or the number of drop-outs in audio/video on live television.

  The same is true for Vista, although it is slightly worse than with XP.

  In Windows 7, interactive use of programs seems to have a strong (and negative) impact on live TV.

  My system (not aware at all, but otherwise very good work, in XP, Vista, Windows 7 and Linux):

  -Sempron 2600
  -1 GB OF RAM
  -Geforce 3 TI 200:
  I know: not supported by Windows 7, BUT:
  -J' also have an ATI HD4650 here, which IS supported by Windows 7
  and who doesn't IS NOT IMPROVE anything!

  Since my Windows 7 installation is quite recent and not yet activated, I did not install a lot, especially any antivirus that could (maybe) deteriorate the performance of the system.

  Apart from live tv playback/record and games Windows 7 IS (!) quickly on my old system.

  In addition, take into account that the games I'm talking about are OLD, so my geforce3ti200 is quite enough for such an old game, like quake2 or quake1. - And as I said, I also have a HD4650 well supported by the ITA which does NOT improve lag problems in games!

  I tried to disable nagle algorithm (as suggested somewhere), I played with registry settings like 'systemresponsiveness '; I also disabled the multimedia class Scheduler - all these things you will find in these many threads any lag in windows 7!

  Does not really - or only partially:
  Deactivation of the multimedia class scheduler service help (a little) but at the price of having audio problems:
  When switching between the different programs of the audio player (e.g. windows media player or vlc) has now audio dropouts that wouldn't happen when the multimedia class Scheduler service is running.

  Therefore, this solution is not ideal.

  Since I also tried to use wifi instead of ethernet, external sound usb instead of edge, different servers etc, and since there is that interference between the task of switching and stability of live tv, I come to this conclusion:

  This must be a timer problem. Something in the Task Scheduler in windows 7 and/or priority system was changed, when comparing it to XP or Vista.

  I see that there are more settings in the registry, as in:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile\Tasks\Audio]

  Where it looks like:

  'Planning category '=' Medium '.
  "SFIO"="Normal priority".
  "Background only"="True".
  'Priority' = dword:00000006
  "Rate of clock" = dword:00002710
  'GPU priority' = dword:00000008
  "Affinity" = DWORD: 00000000

  So I'm expecting setting could something in a different way here (?) have a significant impact...

  Last question:
  Considering the number of threads (when searching via google) all delays in windows 7 games, is Microsoft aware of this problem - and Microsoft offer a fix, a hotfix or another type of solution?

  Thank you, egman

  Check by

  Clean boot

  and update of installed drivers

• BlackBerry Help 10: Lock screen Image changes only not :(

  It's so boring... even when I change the wallpaper, LockScreen image stays in place. I tried installed factory reset a wallpaper but still does not change. How can I go about this pls? Or is there a way it can be changed without changing the wallpaper? Help guyz... Thank you!

  I use v10.1.0.4181 Q10. Although I had to reset to the carrier which has removed all substantive records screen + reset positions of my icons and I used a theme software to change the background. It's back to normal now.

  Thanks ViciousFerret for your effort.

• Revenue share decline due to changes in tax (VAT?)?

  Recently, I noticed there is a change of tax (VAT?) of payment when purchasing apps from BB App World. For example the app that costs $1.99:

  Before (two weeks ago):
  Sub-total: 1, 99USD
  Tax: 0, 30USD
  TOTAL: 2, 29USD

  Now:
  Sub-total: 1, 73USD
  Tax: 0, 26USD
  TOTAL: 1, 99USD

  If the tax is no more added to the price, but it is included in the price of the app. While this will benefit users (pay less), I don't know how this will affect sellers. Options IMO two so far:

  (1) revenue share of 70% is calculated on the subtotal, i.e. we will receive 70% of $1.73 and not $ 1.99

  (2) receive US 70% of $1.99 but we have to manage VAT by ourselves, to my knowledge, up to now, VAT issues were handled by Digital River.

  I am really confused about this change thoughts or ideas? BTW, my PayPal account is founded Europe, don't know how payments are similar to the US/no users Europeans.

  Good news! I received an official response from RIM

  Thank you for your email.  This change does not affect the revenue share distrubuted
  to App World Vendors.  You will receive 70% of the original purchase price indicated
  by yourself in the Vendor Portal.
  

  What a relief

• Drops of easy vpn due to change of address IP ISP

  I do some testing with Cisco Easy VPN between 2 IOS routers.

  The VPN server is behind a static NAT (made by a checkpoint firewall) and it has a fixed IP address.

  Simple VPN client works on a residential xDSL connection. It is behind a NAT router provided by the ISP.

  The internet router has a dynamic public IP address and it changes every 36 hours (ISP is, can not change).

  The easy vpn works great. Both devices detect NAT and enable NAT-transparency. The link appears and works well.

  The question I have, is that when changes in xDSL router's public IP address, the IPSEC link falls and can't get back online.

  It seems that the change of the public IP address prevents the client in order to re-establish the VPN.

  When I reboot the router to vpn client, VPN back upward.

  Someone has encountered this and is there a way I can avoid this problem?

  Hi Tom,

  I have reproduced this issue in my lab, and instead of charging the EzVPN client, you can simply delete the order "crypto ipsec ezvpn client YOUR_EZVPN ' outside interface and it should do."

  Now, since it is foolish to do it manually whenever it breaks down, I suggest:

  -Configured IP SLA accessibility and the tracks through the tunnel.

  -With a 'Beach' object, you can define if it breaks down or not.

  -In the case of a failure, then remove and add the command ezvpn from outside.

  -To do this, you can use the EEM.

  Please see this:

  10 IP sla monitor

  type echo protocol ipIcmpEcho 172.16.10.1 source-interface FastEthernet0/1

  monitor IP sla 10 calendar life never start-time now

  !

  track 10 rtr 10 accessibility

  !

  EzVPN_DOWN event manager applet

  syslog event model ' % FOLLOW-UP-5-STATE: 10 rtr 10 accessibility Down-> Up.

  command action 1.0 cli 'enable '.

  action 1.1 cli command "configures terminal.

  Action 1.2, command cli "f0/0 interface.

  Action 1.3 cli no command "no ipsec encryption YOUR_EZVPN ezvpn client.

  Action 1.4 cli command "crypto ipsec client ezvpn YOUR_EZVPN.

  Action 1.5 cli command "end".

  Where:

  FastEthernet0 / 1---> within the interface

  FastEthernet0 / 0---> outside interface

  172.16.10.1---> remote IP accessible by tunnel EzVPN, when operational.

  So basically, when SLA reports the failure (most likely because the tunnel is down) the router deletes the command EzVPN and again.

  HTH.

  Portu.

  Please note all useful posts

  Post edited by: Javier Portuguez