Log Activation failed?

Similar Questions

• Remote Graphics Software: Remote Graphics Software activation failed

  Hallo,

  I had to replace an old workstation with HP Remote Graphics Software (the workstation of the sender, the machine with the reception part is always the same) on this subject.

  Since the installation of RGS 6.0.1 on the new machine, I get a pop up whenever I connect to it:

  Advanced features activation failed

  Already, I discovered that this has something do with activation without the software work.

  Version of the sender is 6.0.1 as shown above.

  Version of receiver is 7.0.1.

  There are two different versions, because it was setup on the old sender (with always the same receiver machine) and it worked very well there.

  I also tried the newer versions of the sender, still does not.

  As far I knew the remote software activation should occur automatically when having an internet connection.

  I have internet and no proxy or something fancy.

  By coincidence, I found an article that describes the manual setting of the license server in the island of receiver config.

  There was still an old man and I changed it to the last (I hope):

  　

  15.0.92.201

  Same settings for the firewall on the old and the new sender's machine.

  He worked with the old machine, we also have another pair of workstations transceiver, which work fine as well.

  I now use the license file, from the old machine to the new machine.

  Could it be a problem (although I did not see a MAC address restriction in the license file itself)?

  Best regards

  n7c

  To activate the speed of HP or STROKE with RGS receiver versions 7.1.1 (or earlier version) the activation server address must be changed by editing the Configuration file of RGS receiver or using the receiver RGS (details below) Configuration tool.
  RGS receiver Configuration file
  The RGS receiver Configuration file, rgreceiverconfig, is located in both
  C:\Program Files (x 86) \Hewlett-Packard\Remote graphic Receiver\regeceiverconfig (Windows)
  / etc/opt/hpremote/rgreceiver/rgreceiverconfig (Linux)
  Locate the Rgreceiver.Registration.IpAddress property in the file, it uncomment and set it as follows:
  Rgreceiver.Registration.IpAddress = 15.0.92.201
  RGS receiver Configuration tool
  With RGS 7.1 the server address can also change with the receiverConfigApp.exe on Windows or receiverConfigApp.sh on Linux. The address of the server is in the Activation tab.
  Also find URLs for the authorization of RGS user guide
  http://h10032.www1.HP.com/CTG/manual/c01624233.PDF

  Best regards;
  REDA
  I am an employee of HP
  Please click the White Star Kudos to say thank you for helping.
  Please check accept as Solution if my help has solved your problem.

• Activation failed on iPad 2 after updating iOS 9.3

  Activation failed on iPad 2 after updating iOS 9.3. What to do now?

  Wait a bit and try again. If you still can not turn on, contact Apple support. -AJ

• R050sa flow 11: Activation fails after a clean install on laptop pre-installed Windows 10

  I just bought a HP notebook 11 r050sa stream with Windows preinstalled Home 10, but could not start when it opened its doors to the top (circle kept spinning turn for hours).

  As I was intending to do a clean install anyway, to remove any HP bloatware, I decided to delete all partitions and perform a new installation from a USB key using the official Microsoft Media creation tool for Windows 10 Home https://www.microsoft.com/en-gb/software-download/windows10.

  Installation went well but the activation failed indicating that I have "do not have a digital right.

  How is this possible, since the PC came with Windows preinstalled 10? How can I get my license back?

  There was a surprising new twist in this question, should I report it here in case someone else is in the same situation.

  When I received the activation failed I reported to my original request, I had done the installation using the edition entitled 'Windows 10 unilingual homepage' (see figure below), which seemed to me the only option if I wanted to install "Windows 10 home" which is preinstalled on my laptop.

  Yesterday I did a last attempt at creating USB installation after selecting 'Windows 10' (see figure below). Yet once, I removed all partitions on disk and performed a completely clean install on my HP notebook 11 r050sa flow.

  The result is that, in the end installation smoothly, I found my computer with installed "Windows 10 Home" and fully active, without the need to insert an activation key of windows, with all the drivers installed automatically by Windows and without any HP bloatware!

  I'm puzzled by the outcome, but happy...

  

• Online and automated phone activation fails for XP Home

  Activation fails for me for Windows XP Home Edition, after changing a lot of material. Online activation failed. I called the automatic activation phone number where I give them a "ID of Activation" appears on my screen and I like that it is not valid. Microsoft support site sends me to a web page that sends me to a web page that sends me to the first web page.

  How do I get this active?

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• Activation failed for controller board B200 M4 7.0 with UCS Mini 3.0 firmware (2 c)

  The blades of B200 M4 comes with firmware of the controller Office 7.0 and the UCS Mini comes with the latest code of 3.0 (2 c).  Once associated with a Service profile, the firmware controller board 7.0 activation fails.  The blade software 3.0 (2 c) comes with the 6.0 Board controller firmware.  I downloaded the firmware 2.2(5a) blade server package, so that the UCS to 'see' the firmware 7.0.  Then, I changed a bunch of firmware 3.0 (2 c) host to include firmware controller board for the M4 B200 but activation 7.0 still does not work after reboots.  Reacknowledging the blades does not change the result.  Any ideas?

  Michael,

  You did the right thing by adding the 2.2.5a firmware.

  Were you running CLI activation?

  #scope Server X / Y (blade chassis X Y)
  # scope boardcontroller
  # Display image (this will list all versions of firmware)
  # enable force version.0 firmware (Select a version lower than that already running)
  buffer validation #.

  If the foregoing is successful then reset MMIC

  Try--->

  In the firmware of the political host do not check the controller board for the B200M4 leave the field blank. Then manually activate tab firmware installed in the server.

  Kind regards

  Saurabh

• Activation failed

  I bought a new desktop computer and I install my windows 7 pro. Wen am trying to activate the activation failed. What can I do?

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004C008

  What do you hear no progress with the activation of the phone?
  you need to speak to a representative of activation:

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• I bought a 3 system Windows 7 upgrade and activation failed for the 3rd system. How can I fix it?

  I'm fairly certain that only 2 of the improvements have been used to move Windows 7 Vista systems. Now I try with a 3rd system, originally of XP but activation fails.

  If you have the 'Family Pack' for Home Premium, its not uncommon for that to happen. Try to activate by phone.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Windows 7 activation failed because no system on the SSD before installation.

  Hi, I just updated my computer and I have installed the version of win7 upgrade.

  I got the error activation failed because there was no system on the SSD before installation.
  Instead of having to do all that again (install xp and win7 or reinstall win7 then win7) I did a registry change
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\OOBE has changed the 1 to a 0 and restarted
  Entered the CD - Key and got the error
  [code]
  On a computer running Microsoft Windows non-core, run "slui.exe 0x2a 0xC004F061" to display the error text.
  Error: 0xC004F061
  [/ code]
  activate Windows then told me, "the product key you entered cannot be used to activate windows on this computer".
  Then I tried the thing about the phone call.
  has chosen country as the Iceland's nearest.
  received 2 numbers
  800-8236, I get the message that this number is not in use.
  + 47 23 162 126 there I have the language Norwegian (or something) answering machine
  What can I do?

  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004F061

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Activation failed for CS3

  I'm trying to activate my web for CS3 premium software.  I got the serial number, but did not have my previous version number updates.  Adobe has not in the file either, but a stimulus/response from hack to get around this and get to the activation screen secret.  Then activation failed with the error code 194:3, what they told me to come here for help.

  HEEELLPPPPPPPPP

  I NEED to get the software running.   What should I do now?  What does this error code?

  Well, I think that I use now.  Thanks for your help.  I don't know what he has done well.

  I deleted everything we discussed.
  I also reinstalled it under a new admin account.

  But while I had to contact customer support for help without going through the issue of updating the serial number again.  And they gave me a new serial number instead.

  So it could have been one of those three things that made me work.  Thanks for your help.

• activation failed RPF first pro 1.5

  After changing the hardrives in my system, my adobe product activation was no longer possible. It seems as if the activation server is no longer accessible. Even proposed by the programe such telephone activation failed. It seems as if the activation codes used in 2004 (the year of purchase) are no longer valid... Please send me suggestions for this problem

  You MUST download the special version of the page as ann posted, that will work without having to be activated

• After that I installed Gemuine Windows 7 Home Premium 64-bit. However the activation fails

  1. number and product name
  Presario of Compaq CQ62-228DX product number • HP XC432UA #ABA

  2 operating system installed

  
  64-bit Windows 7 Home Premium

  3. error message (if any)

  
  

  Insert the product key on YLE reports Notebook back as invalid

  
    4. all changes made to the youer system until the problem occurred

  
  Partitioned and insbreak ISO image of it that had real control online

  
  

  5. unfortunately I got no recovery disk.

  I had saved a log of my previous report of my laptop in MY USB STICK:

  
  

  Kindly help out me

  PARAMESWARAN Iyer
  

  The ID of the product corresponds to the key for product activation. That's why it failed. The original operating system was an OEM version.

  I suggest either to buy HP recovery media or a HP partner for the route more inexpensive to solve this.

• Windows 7 Activation fails with 0xC004e003

  My Dell laptop had a hard drive failure, so I replaced the drive and it fails with an error 0xC004E003.  I tried to phone activation by the 4 SLUI but does not provide the option to activate by phone - just call Dell to fix the problem.  Here is a report of diagnosis WGA:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {962DC190-3499-42B5-A1C8-C7F8B016EEB2} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120503 - 2030
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {962DC190-3499-42B5-A1C8-C7F8B016EEB2}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-3548137055-96496508-2867800813Dell Inc.. Inspiron 1545 Dell Inc.. A14 20091207000000.000000 + 00084AA3A07018400F804090409Central Standard Time(GMT-06:00)03DELL WN09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7601.0000-2502012
  Installation ID: 012891615054965443880383222275882213951375301325519611
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: initial grace period
  Time remaining: 25920 minute (s) on (18 day (s))
  Remaining Windows rearm count: 4
  Trust time: 06/09/2012-08:47:03

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MgAAAAEAAQABAAMAAAABAAAAAwABAAEA6GHwUi6f2jPk1nYOKB/OcFRtmneeTFYPRso =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  WN09 DELL SLIC
  SSDT PmRef CpuPm

  The problem is that your system and/or the key OEM_SLP - and you seem to have reinstalled using a disc retail or ISO.

  You must change the product key to the one on the COA sticker on the case of the machine, using the link change the key of product at the bottom of the system properties page.

  You may need to activate by phone.

• CS4 activation failed after several activations

  I would like to activate CS4 after I formmated my computer, but it will fail since I already

  done several times. How can I activate it?

  It is a software that I bought several years ago and I still have the serial number

  Contact Adobe technical support via chat and ask them to reset your activations.  If they are not able to they should be able to explain why it is not possible to reactivate it.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• HP ENVY m6 1158ca: Windows 8 Pro Setup own activation fails 0xC004C003 blocked by OEM product key

  My hard drive died on my HP ENVY m6 1158ca.  I replaced and ran 6 discs recovery I created for my daughter and

  After the last completed album, I hit continue to do construction and each time after several reboots (ready devices... Prepares... ... Software administrator is installed) it would get the BSOD - 0xc000000f - a required device is not connected or not available.  SO I format the disk of 1 TB and do Factory reset again, and it still fails in the same way.

  After failing on several occasions, I've used a Windows DVD Pro 8 for another HP laptop and Windows 8 coming!

  However, the activation of Windows 8 needs a key I guess that the BIOS it will not work.

  Call Microsoft by using the "activate Windows by phone" gave rise to the statement "you must call OEM.

  to get a key and then call us back and then we can help you"

  The HP ENVY is out of warranty, who do I contact to get this key on the BIOS?  or the BIOS button does not work

  because the Windows 8 Pro does not correspond to something?  The laptop came originally with Windows 8.

  Thanks in advance for any help,

  Marlene

  Hi @ml88,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  The product key that is embedded in the BIOS may not work with the version of Windows 8 Pro.

  Here is a document HP-HP System Recovery troubleshooting (Windows 8) computers you can review. It can help restore the system from the recovery disks.

  If you need to get the recovery media:

  HP computers - get HP recovery disks or HP USB recovery disc

  Let me know how it goes.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

  Kind regards