Log in with the id and pw

Similar Questions

• cannot log on as administrator with the password and open a user button session sends to the temporary profile.

  cannot log on as administrator with the password and log on user button wife sends him to temp. access to some of my articles on his desk.  She lost all access to his information.

  Original title: cannot log on as administrator with the password and log on user button wife sends him to temp. access to some of my articles on his desk. She lost all access to his information.

  Hello

  • Remember to make changes to your computer before this problem started?

  However, you can access the link below and follow the steps mentioned in the article and check if it helps you to fix the problem, and connect you to your normal user account.

  http://support.Microsoft.com/kb/947242

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem of password; I tried to log in with the password that I had for years and now it says its wrong.

  I tried to log in with the password that I had for years and now it says its wrong. I have reset the password without the disc? I am trying to renew new internet protection and it wont let me because I need to approve it.

  Thank you

  If you want to tell your Windows 7 user password, see guide to recovering lost passwords or other defects preventing log on Windows 7 Home Premium

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• "Access is denied. Please log on with administrator privileges and try again.

  I am running windows 8 and until a few weeks ago, I could play and enjoy age of Mythology, but now, whenever I try to play, I get this message:

  "Access is denied. Please log on with administrator privileges and try again.

  I read a few other posts regarding this issue and to be honest, none of them helps me at all and I found the instructions to be very complicated.

  I think that my problem started only after an update or other Windows, but I could be wrong.

  I'm on a laptop and no other other person has an account on or use this computer - so I thought that I was the administrator.

  I really hope that someone can help me with what I really want to play my game again.

  Thanks in advance.

  Concerning

  BFchild

  Hello

  Thank you for the update on the issue.

  Yes, you are right that if the mentioned Windows Update is installed on your system, then some programs may not run. (For example, some video games not work.)

  For more details and information on the mentioned update, you can see the article mentioned below and see if it helps you to solve the problem.

  MS15-097: Description of update for the graphical component of Windows security: 8 September 2015

  Keep us.

  Kind regards

• [HELP] Problem with the restoration and recovery in the new host

  Hi, guys!
  
  I have tried for two days, but still can't make it work.
  I took a hot (online) full backup archive as well as the control file logs with the SPFILE and then copy the backup to the new host with the same directory structure and parameters. Finally, I tried to restore and recover the database on the new host, but failed during the restore process.
  
  The original host and the new host have the same subject Oracle installed until the patch level. I couldn't understand the solution to this problem based on my knowledge on Oracle DB.
  
  Could someone help me out here? Any advice would be appreciated!
  
  -----
  RMAN > restore the database up to the wire of the sequence 10 1;
  
  From restoration to November 8, 11
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01. DBF
  restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01. DBF
  restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01. DBF
  restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01. DBF
  restoring datafile 00005 to D:\ORA_DATADATA01. DBF
  restoring datafile 00006 to D:\ORA_DATA\DATA02. DBF
  restoring datafile 00007 to D:\ORA_DATA\INDX01. DBF
  restoring datafile 00008 to D:\ORA_DATA\INDX02. DBF
  channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BK
  P
  
  switch to the previous backup
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 11/08/2011 11:41:33
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of the file 4 found to restore
  RMAN-06023: no backup or copy of datafile 3 found to restore
  RMAN-06023: no backup or copy of datafile 2 found to restore
  RMAN-06023: no backup or copy of datafile 1 found to restore
  -----
  
  Here is some additional information you might want to know about:
  
  -----
  RMAN > list incarnation;
  
  
  List of Incarnations of the database
  DB key Inc key STATE ID DB name DB reset reset time SNA
  ------- ------- -------- ---------------- --- ---------- ----------
  1 1 PRODDB 3774691295 PARENT 1 17 APRIL 07
  2 2 3774691295 PRODDB PARENT 521803 6 OCTOBER 11
  3 3 3774691295 PRODDB PARENT 1595143 20 OCTOBER 11
  4 4 3774691295 PRODDB PARENT 1600974 20 OCTOBER 11
  5 5 3774691295 PRODDB PARENT 1952053 27 OCTOBER 11
  6 6 PRODDB 3774691295 CURRENT 2146951 7 NOVEMBER 11
  
  RMAN > backup recoverable list;
  
  
  List of backup sets
  ===================
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  37 full 822,34 M DISK 00:29:47 7 November 11
  BP key: 37 status: AVAILABLE Tablet: NO Tag: TAG20111107T175037
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
  2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BKP
  List of files to backup data value 37
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  2149673 full 1 7 November 11 D:\DBDATA\PRODDB\SYSTEM01. DBF
  2 full 2149673 D:\DBDATA\PRODDB\UNDOTBS01 7 November 11. DBF
  3 full 2149673 D:\DBDATA\PRODDB\SYSAUX01 7 November 11. DBF
  4 integer 2149673 D:\DBDATA\PRODDB\USERS01 7 November 11. DBF
  5 integer 2149673 D:\ORA_DATA\DATA01 7 November 11. DBF
  full 2149673 D:\ORA_DATA\DATA02 6 7 November 11. DBF
  7 full 2149673 D:\ORA_DATA\INDX01 7 November 11. DBF
  8 whole 2149673 D:\ORA_DATA\INDX02 7 November 11. DBF
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  38 full 6.95 M DISK 00:00:03 7 November 11
  BP key: 38 status: AVAILABLE Tablet: NO Tag: TAG20111107T182034
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
  \2011_11_07\O1_MF_S_766606834_7CH8Q439_. BKP
  Control file included: cash SNA: 2151141 cash time: 7 November 11
  SPFILE included: Modification Date: 7 November 11
  
  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  18,46 39 M DISK 00:00:05 8 NOVEMBER 11
  BP key: 39 status: AVAILABLE Tablet: NO Tag: TAG20111108T093359
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
  2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_. BKP
  
  List of newspapers archived on backup value 39
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 1 2146951 7 NOVEMBER 11 2149493 NOVEMBER 7, 11
  1 2 2149493 7 NOVEMBER 11 2149519 NOVEMBER 7, 11
  1 3 2149519 7 NOVEMBER 11 2149565 NOVEMBER 7, 11
  1 4 2149565 7 NOVEMBER 11 2149641 NOVEMBER 7, 11
  1 5 2149641 7 NOVEMBER 11 2172859 NOVEMBER 7, 11
  1 6 2172859 7 NOVEMBER 11 2197851 NOVEMBER 7, 11
  1 7 2197851 7 NOVEMBER 11 2220349 NOVEMBER 8, 11
  1 8 2220349 8 NOVEMBER 11 2222621 NOVEMBER 8, 11
  1 9 2222621 8 NOVEMBER 11 2222729 NOVEMBER 8, 11
  1-10 2222729 8 NOVEMBER 11 2223088 NOVEMBER 8, 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  40 full 6.95 M DISK 00:00:00 November 8, 11
  BP key: 40 status: AVAILABLE Tablet: NO Tag: TAG20111108T093411
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
  \2011_11_08\O1_MF_S_766661651_7CJY84LK_. BKP
  Control file included: cash SNA: 2223097 cash time: November 8, 11
  SPFILE included: Modification Date: 8 November 11
  -----
  
  Thanks in advance!
  
  Jay

  In short, the RCS of the controlfile will be generally higher than corresponding SCN of the data in the event of hot backup (online) file; However, the two SNA will be the same in the case of cold (off-line) backup. Am I entitled?

  Yes, it's true. In a backup cold (assuming that the CLOSURE was not a SURRENDER but was NORMAL, TRANSACTIONAL, or IMMEDIATE) all files in the database (data files, redo log and controlfiles files) are 'compatible' - at the same point in time, to the same SCN. In a hot backup, the files are updated. RMAN is not necessarily take all the data files at the same time - for example when you have several data files, RMAN would backup the files in batches of 4 or 8 - data files are therefore controlled at different points in time. Similarly, the controlfile is saved last.

  Hemant K Collette

• I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. Help

  I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. HELP PLEASE. previous e-mail files are under mail then mail.earthlink* .net and each of the five mail .net is an email address I have. I can't find a way to identify each file by email to the specific email address (IE mail.my E-mail name.net) so I can copy the files and emails from the past to the email addresses now under tbird. previous installed e-mail identities may not be the current configuration of e-mail files in tbird. I think that I must be sure that mail.name.net matches the previous mail.name.net to be able to copy and paste the old to the new. is there a way to find the file name correct the old email and correspond to the new? all my emails very important information are mostly in the old mail electronic id and must be available in the identification of email again (but same) how can I do this?

  http://KB.mozillazine.org/Importing_folders

  Use this module.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

• The computer crashes: something to do with the minidump and sysdata.xml?

  My computer broke down twice now and restart an error message pops up saying "your computer has recovered from a serious error". It is said that two files in the error report will be sent to microsoft. the first complete mini103106 - 01.dmp and the second sysdata.xml

  I could find these files and delete them but have no idea if this would solve the problem and do not want to do the wrong thing...

  Hello

  Not easy to say why this is happening, but for me it s definitely something wrong with the software.
  Well, in this case we can only speculate. You know, it s Microsoft Windows and sometimes things happens without any reason :(

  I have heard from probably the system restore function could be corrupted and no have deleted the folder with the minidump and disabled the system restore feature in the control panel-> system.

  But in my opinion, the system restore function is important and necessary if you want to restore the operating system to the beginning.
  That's why I put t recommend disabling this feature.

• I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

  I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

• My new Apple TV v4 does not smoothly on Airplay with my MacbookPro and Air laptops but with the iPhone and iPad Airlay gets so juddery and then goes off - laptop computer WiFi connections all that happens on clues?

  Devastated to find that the new AppleTV works great on Airplay / mirroring with the iPhone and iPad devices but completely useless on the NEW laptops.

  Trying to show any video for example utube creates immediately hop on the TV screen when you use the Macbook and in no time the WiFi connection is stunned.

  What is going on?

  I use ElCapitan, and the last 15 "16GB i7 Macbook MacbookPro and not expect a problem with streaming media.

  Absolutely well on Airplay with bith an iPhone 6 Plus and also an Air iPad

  This will be due to a network problem. There is a difference between mirroring of a phone/Tablet and grow to a full desktop in real-time

  Mmake that there is no other activity (other streaming, web browsing, backup network etc.)

  Try to connect the Apple TV via ethernet

  To see a current state of the network to obtain a report of istumbler or similar. Look for the strength of the signal, noise, networks nearby

  Test on another network

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!

• How can I measure the variable tension with the DMM and switch?

  Hello, engineer,

  I am a student, I want to measure the varying tensions from V to Via. I have the following equipment: SMU-1065 PXI-4065 PXI-2529. I use the PXI-8360 and PXI-8361 to connect with my PC. I hope I can do that when I have the next blood I should click with the mouse and connect the right position to the object of measurement.

  How can I achieve that?

  Any suggestions with great satisfaction.

  Since I know a little English, if I did not explain my question clearly, please ask me.

  Best wishes.

  Kind regards.

  chuanyuehuoxian

  Yes, you can.

  You can set the samples when using DMM.

  You can also refer to the example in LabVIEW.

  THX!

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• How to remove an old version of MSN (with the butterfly) and messages inside?

  I always use an msn address.  My desk top still shows an older version (with the butterfly) and when you click on this old old messages are there.  How to remove this version and messages.

  Hello

  Please refer to this article.

  How to uninstall the MSN Explorer software for my computer?

  http://answers.MSN.com/solution.aspx?SolutionID=115dc6c5-4ae7-4e38-8e0b-3eac07d020fa

  If you still have any questions, then contact msn support

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  I hope this helps.